Balance Work Of 25 Bedded Sub-District Hospital At Atholi Paddar ( Contract No 05 ) Balance Work Of 25 Bedded Sub-District Hospital At Atholi ( Paddar ) . ( Contract No 05 )
Tender Value
3.34 Crore
Estimated cost
Bid Submission
08 May 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ATHOLI PADDAR → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Balance Work Of 25 Bedded Sub-District Hospital At Atholi Paddar ( Contract No 05 ) Balance Work Of 25 Bedded Sub-District Hospital At Atholi ( Paddar ) . ( Contract No 05 )
BOQ
| Name of Work: Balance work of 25 Bedded Sub-District Hospital at Atholi ( Paddar). Contract No 05 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : | |||
| 2 | 1.01 | 50 % all kinds of soil | 175.11 | Cum | |
| 3 | 1.02 | 35 % Ordinary Rock | 122.57 | Cum | |
| 4 | 1.03 | 15% Hard rock (Blasting Prohibited) | 52.23 | Cum | |
| 5 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed (including lead, lift & carriages complete) | 167.65 | Cum | |
| 6 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed (including lead, lift & carriages complete) | 313.39 | Cum | |
| 7 | 4 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth (including lead, lift & carriages complete) | 124.07 | Sqm | |
| 8 | 5 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) (including lead, lift & carriages complete) | 27.2 | Cum | |
| 9 | 6 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) (including lead, lift & carriages complete) | 122.34 | Cum | |
| 10 | 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) (including lead, lift & carriages complete) | 29.17 | Cum | |
| 11 | 8 | Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) | 122.34 | Cum | |
| 12 | 9 | Half brick masonry with bricks of class designation 75 in foundations and plinth in : Cement mortar 1:3 ( 1 cement: 3 coarse sand (including lead, lift & carriages complete) | 16.58 | Sqm | |
| 13 | 10 | Half brick masonry with bricks of class designation 75 in foundations and plinth in : Cement mortar 1 :4 ( 1 cement : 4 coarse sand) (including lead, lift & carriages complete) | 141.56 | Sqm | |
| 14 | 11 | Extra for half Brick masonry in superstructure above plinth level upto floor V level | 141.56 | Sqm | |
| 15 | 12 | Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks). (including lead, lift & carriages complete) | 141.56 | Sqm | |
| 16 | 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood | 11.78 | Cum | |
| 17 | 14 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 1 Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinf!eS bright finished of required size with necessary 35 30 screws.Second class deodar wood | 62.4 | Sqm | |
| 18 | 15 | Providing and fixing 35 mm thick wire gauze shutters _,. using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size Second class deodar wood. | 62.4 | Sqm | |
| 19 | 16 | Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size | 141.14 | Sqm | |
| 20 | 17 | Providing 40x5mm flat iron hold fast 40 em long including fixing to frame with 1 Omm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x1 Ox15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) | 450 | Nos | |
| 21 | 18 | 6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand) (including lead, lift & carriages complete) | 1781.22 | Sqm | |
| 22 | 19 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including lead, lift & carriages complete) | 6009.75 | Sqm | |
| 23 | 20 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand) (including lead, lift & carriages complete) | 1412.85 | Sqm | |
| 24 | 21 | 15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix1 : 3 ( 1 cement : 3 fine sand) (including lead, lift & carriages complete) | 76.57 | Sqm | |
| 25 | 22 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete | 9203.85 | Sqm | |
| 26 | 23 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. | 9203.85 | Sqm | |
| 27 | 24 | Wall Painting with plastic emulsion paint of approved lj brand and manufacture to give an even shade. Two or more coats on new work | 7790.97 | Sqm | |
| 28 | 25 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour two coats | 1412.85 | Sqm | |
| 29 | 26 | Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood | 504.97 | Sqm | |
| 30 | 27 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work | 504.97 | Sqm | |
| 31 | 28 | Providing and fixing plained eaves boarding. 300x40 mm (2nd class Deodar wood) (nominal size) | 272.25 | Mtr | |
| 32 | 29 | Providing gala 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : In 75x75 mm deep chase (including lead, lift & carriages complete) | 39.02 | Mtr | |
| 33 | 30 | Providing and fixing of gang saw cut mirror polished 18-20 mm thick Granite of approved brand / shade laid over a bed of 20 mm thick cement Mortar (1:4)mix as per the pattern directed by Engineer, including joining etc complete | 1636.52 | Sqm | |
| 34 | 31 | Providing and fixing anti skid tlle of approved over 20 mm thick CM 1:4 with gravity matching pigment in joints. complete job | 2433.5 | Sft | |
| 35 | 32 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm (including lead, lift & carriages complete) | 319.67 | Sqm | |
| 36 | 33 | Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete. (including lead, lift & carriages complete) | 822.12 | Sqm | |
| 37 | 34 | Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work | 570 | Rmt | |
| 38 | 35 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-inCharge (glazing, panelling and dash fasteners to be paid for separately.Polyester powder coated aluminium (minimum thickness of polyester powder coated 50 Micros | 6177.6 | Kg | |
| 39 | 36 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc | 3000 | Kg | |
| 40 | 37 | Providing and fixing G.l. pipes complete with G.l. fittings and \nclamps, including cutting and making good the walls etc.: Gi Pipe | |||
| 41 | 37.01 | 15 mm dia. nominal bore Medium | 290 | Rmt | |
| 42 | 37.02 | 20 mm dia. nominal bore Medium | 210 | Rmt | |
| 43 | 37.03 | 25 mm dia. nominal bore Medium | 125 | Rmt | |
| 44 | 38 | Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. PVC Rain Pipe | |||
| 45 | 38.01 | 75 mm diameter | 250 | Rmt | |
| 46 | 38.02 | 110 mm diameter | 200 | Rmt | |
| 47 | 39.01 | PVC Bend 75 mm | 100 | Nos | |
| 48 | 39.02 | PVC Bend 110 mm | 90 | Nos | |
| 49 | 39.03 | Tee 75 mm | 100 | Nos | |
| 50 | 39.04 | Tee 110 mm | 120 | Nos | |
| 51 | 40 | White Vitreous China wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar tapswith elbow operated levers. | 28 | Nos | |
| 52 | 41 | Providing and fixing white vitreous china pedestal for wash\nbasin completely recessed at the back ,f, or the reception\nof pipes and fittings | 28 | Nos | |
| 53 | 42 | W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend | 22 | Nos | |
| 54 | 43 | Providing and fixing water closet squatting pan ( Indian\ntype W.C. pan) with 100 mm sand cast Iron P or Strap,\n10 litre low level P.V. C. flushing cistern including flush\npipe (of approved make) \"manually contro(led device\n(handle lever) conforming to IS:7231, with all fittings and\nfixtures complete, including cutting and making good\nthe walls and floors wherever required Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. | 8 | Nos | |
| 55 | 44 | Providing and fixing mirror of superior glass( of approved\nquality) and of required shape and size with plastic .\nmoulded frame of approved make and shade with 6 mm\nthick hard board backing Rectangular shape 1500x450 mm | 15 | Nos | |
| 56 | 45 | Providing and fixing mirror of superior glass( of approved\nquality) and of required shape and size with plastic .\nmoulded frame of approved make and shade with 6 mm\nthick hard board backing Rectangular shape 453x357 mm | 12 | Nos | |
| 57 | 46 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. | 24 | Nos | |
| 58 | 47 | 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. | 14 | Nos | |
| 59 | 48 | Providing and fixing PTMT soap dish holder having length of\n138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 1 06gms. | 18 | Nos | |
| 60 | 49 | Providing and fixing C.P. brass long nose bib cock of\napproved quality conforming to IS standards and weighing\nnot less than 810 gms. 15 mm nominal bore | 26 | Nos | |
| 61 | 50 | Providing and fixing C.P. brass angle valve for basin mixer\nand gyser points _of approved make conforming to IS : 8931\na) 15 mm nominal bore | 90 | Nos | |
| 62 | 51 | Providing and fixing C.P. brass close hole basin mixer piller\ntap of approved quality and make, weighing not less than\n1.970 kg. 15 mm nominal bore of standard back type.\n | 26 | Nos | |
| 63 | 52 | Providing and fixing PTMT bib cock of approved quality &\ncolour. 15 mm nominal bore, 165 mm long, weighing\nnot less than 110 gms. | 30 | Nos | |
| 64 | 53 | Providing and placing on terrace (at all floor levels)\npolyethylene water storage tank lSI : 12701 marked indicating\nthe BIS License No. with cover and suitable locking\narrangement and making necessary holes for inlet, outlet\nand overflow pipes but without fittings and the base support\nfor tank [Sintex, Electroplast, Star, Lotus or equivalent having\nvalid lSI license]. | 25000 | Ltr | |
| 65 | 54 | Urinal | 18 | Nos | |
| 66 | 54.01 | Urinal Partition | 18 | Nos | |
| 67 | 55 | Providing and fixing of hardware fittings(Stainless Steel) | |||
| 68 | 55.01 | Aral Drop 1\" | 78 | Nos | |
| 69 | 55.02 | Aral Drop 8\" | 55 | Nos | |
| 70 | 55.03 | Aral Drop 6\" | 35 | Nos | |
| 71 | 55.04 | Handle 8\" | 178 | Nos | |
| 72 | 55.05 | Handle 6\" | 178 | Nos | |
| 73 | 55.06 | Tower Bolt 6\" | 90 | Nos | |
| 74 | 55.07 | Tower Bolt 8\" | 78 | Nos | |
| 75 | 55.08 | Door Stopped | 178 | Nos | |
| 76 | 55.09 | Eyes & Hooks | 180 | Nos | |
| 77 | 55.1 | Door Closer | 178 | Nos | |
| 78 | 56 | Providing and fixing wooden cleats of size 1 00mmx75mmx50 mm to doors and windows with approved fittings including removal of old cleats where necessary including painting, polishing or bees waxing to match the existing shade Renewing glass panes, with Putty & Nails wherever necessary Float glass panes of thickness 5.5mm | 225.79 | Sqm | |
| 79 | 57 | Centring and shuttermg including strutting, propping etc. and removal of form for | |||
| 80 | 57.01 | Foundations footings. bases of columns | 69.7 | Sqm | |
| 81 | 57.02 | Retatning walls. return walls. walls (any thickness) including attached pilasters. buttresses. plinth and strmg courses\nfillets etc | 408.92 | Sqm | |
| 82 | 57.03 | Suspended floors, roofs, landings, balconies and access platform. | 44.6 | Sqm | |
| 83 | 57.04 | Edges of slabs and breaks in floors and walls.Under 20cms wide | 19.15 | Rmt | |
| 84 | 58 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold Twisted Bar | 3208 | Kg | |
| 85 | 59 | Providing and laying in position cement concrete of\nspecified grade excluding the cost of centring and\nshuttering- All work upto plinth level. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Crushed (including lead, lift & carriages complete) | 92.91 | Cum | |
| 86 | 60 | Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Light shade using white cement (including lead, lift & carriages complete) | 188.66 | Sqm | |
| 87 | 61 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position:- Second class deodar wood | 18.98 | Cum | |
| 88 | 62 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws \n1st class deodar wood | 153.34 | Sqm | |
| 89 | 63 | Providing & fixing of 6MM thick waterproof ply in ceiling with necessaryscrew(Complete job) | 1113.26 | Sqm | |
| 90 | 64 | Providing and fixing plain, square edged wooden beading 65x12 mm section with screws of approved quality for ceiling \n 1st class deodar wood. | 1067.07 | Mtr | |
| 91 | 65 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. | 1266.6 | Sqm |
AI Tender Summary
Tender Timeline
Apr 23, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMay 08, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender