Renovation With Fabrication Erection Testing And Commissioning Of 8 Nos Check Dam Gate Of Kantabania Check Dam Of Mi Sub Division Nilagiri Under Mi Division Balasore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 May 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilagiri → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation With Fabrication Erection Testing And Commissioning Of 8 Nos Check Dam Gate Of Kantabania Check Dam Of Mi Sub Division Nilagiri Under Mi Division Balasore
BOQ
| Name of Work:-Renovation with fabrication, erection, testing & commissioning of 8 Nos. Check Dam gate (Size-2140mm x 1000mm) of Kantabania Check Dam of M.I Sub-Division, Nilagiri under M.I Division, Balasore. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply of structural steel materials of different section and sizes (IS:2062), fabrication including machining and assembly of gate consisting of skin plate , horizontal girder, end vertical girder , etc., hoisting arrangements consisting of hoist bridge, supporting beams, cast iron gear box, base plate etc. of total weight about 4.28 MT for 8 Nos. Check Dam gate (Size-2140mm x 1000mm) of Kantabania Check Dam of M.I Sub-Division, Nilagiri under M.I Division, Balasore as per specification with all accessories including transportation,watch & ward DG Set ,machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts all complete as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001112 | 1 | Set |
| 2 | 2 | Supply of following bought out materials for 8 Nos. of check gates - Gate pin F40mm collar dia 70mm 10mm thick, total length 140mm, material-45C-8 of IS-1570 Part-II drill hole for split pin of 8mm dia at centre, 10mm from pin end-8 Nos,Split pin f 8mm x 80mm long stainless steel of IS-549-8 Nos,M16 Anchor bolt 250mm Long, thread length 90mm with double nut & washer -128 Nos,Cast iron gear box assembly consisting C.I cover plate of size (250mm x 250mm x 20mm) C.I Nut (Sq thread) ball bearing SKF-51512 with foundation bolt M25 x 200 with nut & washer-4 Nos. Cover bolt M16x190 with nut & double Washer-4 Nos. with operating handle-1No.-8Set,Gate stem-cum-screw rod F63mm with length- 2500mm with threadlength 1800mm SQ-62 x 9 of IS-4694-20Nos,Grease MP3-40Kg. | BI01010001010000000000000515BI0100001113 | 1 | Set |
| 3 | 3 | Erection, positioning, alligning,fixing,trial,commissioning, testing etc. of second stage embedded parts consisting of sill beam, side seal, track , guide etc., scouring sluice gate consisting of skin plate , horizontal girder,end vertical girder, seal flats etc., screw hoisting arrangements consisting of hoist bridge, cast iron gear box,supporting beams, cross beam base plate,fixing of anchor bolts, laying of chequered plate etc. of total weight about 4.07 MT for 8 Nos. of gates as per specification with all accessories including machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts, coffer dam & dewatering, transportation charges with labour charges for loading and unloading all complete as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 1 | Set |
| 4 | 4 | Painting of 2nd stage embedded parts (exposed portion) , gate and its components in both upstream side and downstream side,hoisting components including cleaning, degreasing, handling, cost of paint, applying of one coat Zinc primer of 40micron thick and three coats of coal tar epoxy paint of 100 micron each, of approximately 131.56 sqm for 8 Nos. of gates all inclusive of labour, materials and consumables as per relevant IS Code specifications with all lead & lifts as per instruction of Engineer-In-Charge. | BI01010001010000000000000515BI0100001115 | 1 | Set |
| 5 | 5 | Providing reinforced cement concrete grade M-20 of approximately 2.072 cum for 2nd stage concreting using 20 mm and downgraded crusher broken hard granite aggregates of approved grade and quality from approved quarry free from weathered skin surface, dust and any other deleterious materials as per specification with all leads, lifts including cost, carriage, royalty and taxes of all materials, mixing and vibrating concrete by mechanical means including providing rigid & smooth steel form works for 2nd stage concrete works and dismantling the same after required days, curing, supply of all tools & plants, machinery, labour charges, cost & carriage of water for mixing and curing concrete including hire and running charges of all machinery / equipments, construction / erection and removal of gangways, staging’s, scaffoldings & incidental charges complete for 8 Nos. of gates as per the direction of the Engineer in-Charge. | BI01010001010000000000000515BI0100001116 | 2.072 | cum |
AI Tender Summary
Tender Timeline
Apr 23, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMay 03, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 04, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender