E-Tender For Optical Fiber Cable Maintenance In Marwahi-Pendra District Under Bilaspur Ssa-Chhattisgarh

E-Tender For Optical Fiber Cable Maintenance In Marwahi-Pendra District Under Bilaspur Ssa 1 Through rate for excavating trenches up to a depth of 165 cms. Including laying of HDPE/PLB pipe, and back filling the excavated trenches in the original shape after laying the HDPE/PLB pipe with or without protection 2 Laying of additional HDPE/PLB pipes /Coils, coupled with HDPE sockets and drawing 6 mm PP rope.(Department will supply HDPE pipes , HDPE sockets, PP rope, End Caps) in same trenches 3 Road/Rail crossing through horizontal boring method and inserting 65/40 mm dia GI pipes and pushing HDPE/PLB pipes/coils inside and drawing 6 mm PP rope(Department will supply G.I. Pipes in lengths of approx. 6 M, HDPE Pipes/ Coils and PP Rope) 4 Laying full round RCC Pipes in trenches with HDPE/PLB Pipes/coils inside and drawing PP rope 5 Laying Half round RCC Pipes in trenches with HDPE/PLB Pipes/coils inside and drawing PP rope. 6 laying OF cable ( Low count 2F/ 4F/ 6F ) Overhead/manual pulling 7 laying OF cable ( 12 F and above) Overhead/manual pulling 8 Digging of PITS of Size 165 cms. X 120 cms. X 120 cms., for opening & splicing of joint (All materials required for the work shall be arranged by the contractor) 9 Digging of PITS for Fault Location mechanically using Earth Excavation machines 10 Pulling of O F Cable all sizes by blowing method 11 Splicing OF cable ( Low count 2F/ 4F/ 6F ) in joints/termination department will supply jointing material, splicing machine, tool kit, OTDR and contractor will supply vehicle 12 Splicing OF cable ( Low count 2F/ 4F/ 6F ) in joints/termination department will supply only jointing material, and contractor shall arrange splicing machine, tool kit, OTDR and vehicle 13 Splicing OF cable ( Low count 2F/ 4F/ 6F ) in joints/termination department will supply jointing material, splicing machine, tool kit, OTDR and vehic 14 Splicing OF cable ( 12 F and above) in joints/termination department will supply jointing material, splicing machine, tool kit, OTDR and contractor will supply vehicle 15 Splicing OF cable ( 12 F and above) in joints/termination department will supply only jointing material, and contractor shall arrange splicing machine, tool kit, OTDR and vehicle 16 Splicing OF cable ( 12 F and above) in joints/termination department will supply jointing material, splicing machine, tool kit, OTDR and vehicle 17 Digging of pits 1 meter on each manhole/joint chamber for supply and fixing of route/joint indicator, fixing and concreting of route/joint indicator, Painting and sign writing of route/joint indicators (With Supply of material) 18 Horizontal boring by HDD method with bore 225 mm dia ,inserting maximum 3 HDPE/3 PLB pipes (165 cm depth) 19 Cement Concrete 20x20 cm including PLB/GI pipe and drawing pp rope ( all materials will arrange by contractor) 20 Digging of Pits for jointing chamber, fixing of pre-cast RCC chamber, filling of RCC chamber with clean sand, placing of pre-cast RCC slab on RCC chamber, and back filling of jointing pit (The BSNL will supply Pre-cast RCC Chamber with cover. (All other material arrange by contractor) 21 Digging of Pits for jointing chamber, fixing of pre-cast RCC chamber, filling of RCC chamber with clean sand, placing of pre-cast RCC slab on RCC chamber, and back filling of jointing pit. (The contractor shall arrange all materials required for the work )

INR 590 /-

INR 15048.0 /-

INR 6.01 Lakhs /-