| 1 | 1 | Core cutting for fixing S.S bolts of required diameter by rotary drills or any approved method, cleaning the holes by blow out pump and with round brushes, grouting the same with suitable anchoring adhesive bars with suitable anchoring adhesive resins of HILTIMAKE HIT –HY 150 or equivalent resins, transporting hoisting, placing and proper fixing of reinforcement bars with cost & expenses of all materials, tools and plants, machineries taxes, tollage including providing barricades to the working area, Gate entry fees etc. complete excluding GST and as per direction of Engineer in charge. | | 160 | Each No. |
|---|
| 2 | 2 | Supply of S.S bolts of 30mm dia with a length of 300mm of HILTI/BOSCH or equivalent for fixing of MS Ladder at Oil Jetty/ berth faces including all taxes, transportation, Port entry fees etc complete exlcuding GST and as per direction of Engineer in charge. | | 160 | Each No. |
|---|
| 3 | 3 | Supply, fabricating and fixing of M.S plate/Channel/Angle and Steel Bar structural including cutting, bending, welding, finishing all complete with supply of all material, labour, all taxes, T&P, running & hire charges of all machineries/ vehicles/equipments, Port entry fees, transportation of material etc. all complete excluding GST and as directed by Engineer in charge. | | 56 | Each Qntl. |
|---|
| 4 | 4 | Making scafolding for erecting of MS channel, angle and plate including moulding, cutting, welding, drilling holes of required diameter & bolding the same including transporting the material at working point with safety arrangement etc all complete excluding GST and as per direction of Engineer in charge. | | 20 | Each Point |
|---|
| 5 | 5 | Preparation of the steel surface using proper sand blasting equipment to remove any loose material, contaminations and laitance to provide a sound, fine griping surface, clean the entire steel area using any mechanical means. Supply and applying one coat of epoxy based Zinc rich or anticorrosive protective coating i.e. friazine ®@ 0.3Kg /sqm/coat or equivalent on the prepared steel surface and supply two coats of epoxy resin based high built thixotropic chemical resistance protective coating i.e Sikagard ®63 @0.7 kg/m2/ two coats or equivalent as a final coating on the steel surface with system requirements chemical resistance as per IS 4631-1968. | | 20 | Each No. |
|---|
| 6 | 6 | Supplying, transporting and fixing in position of Stag Horn Cast Steel Bollards of 100T Pull capacity including all fittings and fixtures as per specification including cutting cores, concrete (1:11/2:3), adhesive filling and provision of galvanized hold down bolts, buts, washers and painting the bollards with epoxy based Zinc rich or anticorrosive protective coating, certification of all the components by IRS, transportation and delivery of materials at work site of PPT with supply of all material, taxes, T&P, gate entry fees, all safety arrangements etc. complete excluding GST and as per direction of Engineer in charge. | | 6 | Each No. |
|---|
| 7 | 7 | Supplying, transporting and fixing of 75T Pull capacity Cast Steel Bollards including all fittings and fixtures as per specifications including cutting cores, concrete (1:11/2:3 ), adhesive filling, bolts, buts, washers and painting the bollards with epoxy based Zinc rich or anticorrosive protective coating, certification of all the components by IRS, transportation and delivery of materials at work site of PPT with supply of all material, taxes, T&P, gate entry fees, all safety arrangements etc. complete excluding GST and as per direction of Engineer in charge. | | 6 | Each No. |
|---|
| 8 | 8 | Drilling holes by any approved method on the top of berth and fixing of 36mm Dia SS “U” Hook of depth of 350mm using suitable resinous adhesive with cost of all materials, T&P, machineries, all taxes, tollage, Port entry fees including hire & running charges etc complete excluding GST and as directed by Engineer in charge. | | 16 | Each No. |
|---|
| 9 | 9 | Supply & fabrication of Bollards using 20mm thick, 600mm long 457 OD seamless pipe heavy duty & 25mm thick MS base plate and top flange of required size as per approved drawing including making drill holes with M-47 x 600mm depth by any approved method using core cutting machine for grouting of 40mm dia x 600mm long of 304 grades S/S stud in proper level and position using chemical adhesive resin of HILTI/FISCHER or any approved quality including chipping the concrete by concrete breaker upto 100 mm depth for an area of 700 x 750mm and making smooth the surface using CM 1:3 for preparing the bollard base in C.C 1:1½:3 and filling concrete inside the Bollard and filing the top of the bollard with bitumen, scrapping, cleaning the bollard including labour, T&P, all materials, tools & plants, machineries taxes, tollage, Port entry fees etc complete excluding GST and as per direction of Engineer in charge. | | 6 | Each No. |
|---|
| 10 | 10 | Supplying of all labour, T&P for cutting the old damaged ladders from its position with all its fastenings scaffolding including safety arrangement for work in berth face, mending good to the damaged in berth faces occurred during dismantling of ladders with suitable concrete/chemical grouting works, insurance coverage to all workers including hire & running charges of all machineries, misc. works at site & stacking the old damaged structurals/materials at indicated areas, Gate entry fees etc. all complete excluding GST and as per direction of Engineer in charge. | | 10 | Each No. |
|---|
| 11 | 11 | Removal of damaged Super-M/other fenders from the berth face & making free the area from all fixtures and shifting to the same to identifical location in Port area within all leads and lifts from berth area including all taxes, filling the bolt holes from the area in berth with chemical grouts, all transportation, loading & unloading expenses, cutting the exposed SS bolts & washers with required Gas cutter, boat hire charges, scaffolding, all safety measures, Port entry fees, cost & expense of all labour, material, engagement hire & running charges of all machineries/equipments/ vehicles etc. all complete excluding GST as directed by the Engineer in charge. | | 4 | Each No. |
|---|
| 12 | 12 | Supplying, transporting of Tyre Fenders (double tyre) made out of used tyres alongwith all its fixtures as per approved drawing and installation of the same at the Berth face at different locations, transporting of the Fender to the work site with supply of all materials, labour, T&P, all fixtures, transportation, loading, unloading, engagement, running & hire charges of all machineries, all taxes, Port entry fees etc all complete excluding GST and as directed by Engineer in charge. | | 2 | Each No. |
|---|
| 13 | 13 | Supplying, transporting of Tyre Fenders (triple tyre) made out of used tyres alongwith all its fixtures as per approved drawing and installation of the same at the Berth face at different locations, transporting of the Fender to the work site with supply of all materials, labour, T&P, all fixtures, transportation, loading, unloading, engagement, running & hire charges of all machineries, all taxes, Port entry fees etc all complete excluding GST and as directed by Engineer in charge. | | 2 | Each No. |
|---|
