Public Administrative Department Government Departments Closing in 0 days TDR #27731525

Procurement Of Fixed Compactortransfer Procurement Of Fixed Compactortransfer Station With Shifting Mechanism Complete Set Through Gem Under Urban Development Fund ( Udf ) . Sub Head Construction Of Facilities And Shade For Fixing Fcts Near 162 30E Jwal

Issued by Government Departments · WORK, Delhi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Apr 2021
0 days left
EMD
46200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
WORK → Delhi
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Procurement Of Fixed Compactortransfer Procurement Of Fixed Compactortransfer Station With Shifting Mechanism Complete Set Through Gem Under Urban Development Fund ( Udf ) . Sub Head Construction Of Facilities And Shade For Fixing Fcts Near 162 30E Jwala Nagar Shamshan Ghat In Ward No . 30E

BOQ

Name of Work: Procurement of Fixed Compactor Transfer station with Shifting Mechanism(Complete set) through GeM under Urban Development Fund(UDF). Sub Head:- Construction of Facilities and shade for fixing FCTS near 162/30E Jwala Nagar Shamshan Ghat in Ward No.30E Shahdara South Zone under jurisdiction of EDMC.
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Carriage of material by mechanical transport including loading and unloading and staking lime moorum, building rubish - lead upto 10 KM dumping at SLF (LS)146.28Nos
22Earth work in excavation in all kinds of soil includnig getting out and disposal within a lead of 50 Mtrs. lift upto 1.5 Mtrs.132Nos
33Filling of available excavated earth below foundations, floors, plinth beam in layers not exceeding 20cm consolidating each deposited layer by ramming and watering.79.2Nos
44Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand(zone-III) : 6 graded stone aggregate 20 mm nominal size).5.53Nos
55Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 40 mm nominal size).10.5Nos
66Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).36.43Nos
77Reinforced cement concrete work in walls (thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,\npillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and\nreinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone\naggregate 20 mm nominal size).8.92Nos
88Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns.253.9Nos
99Providing and fixing above plinth and upto floor V level, factory made precast concrete solid block of grade M10 made of rec ycled concrete aggregate (RCA) and conforming to IS 2185: Part I-2005 from approved manufacturer, including hoisting and setting in position with cement mortar 1:4 (1 Cement: 4 coarse sand) etc. complete for masonary work as per direction of engineer-in-charge.12.42Nos
1010Providing and fixing upto plinth level, factory made precast concrete solid block of grade M10 made of recycled concrete aggregate (RCA) and conforming to IS 2185: Part I-2005 from approved manufacturer, including hoisting and setting in position with cement mortar 1:4 (1 Cement: 4 coarse sand) etc. complete for masonary work as per direction of engineer-in-charge.28.24Nos
111112 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)14.4Nos
121215 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :- 1:4 (1 cement: 4 fine sand)14.4Nos
1313Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete124.2Nos
1414Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.3500Nos
1515Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.500Nos
1616Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.128.4Nos
1717Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of \"L\" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by engineer-in-charge.54Nos
1818Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.4371.6Nos
1919Steel reinforcement for R.C.C. work including straightening, cutting,1070.4Nos
2020Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading,well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.105Nos
2121Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block makingmachine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.7.5Nos
2222Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :5Nos
2323Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.50Nos
2424Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.62.1: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture100Nos
2525Finishing wall with quality proofing cement paint required shade on new work. New work (Two or more coats applied @ 3.84 kg/10 sqm).88Nos
2626Providing and laying non-pressure NP2 class (light duty) R.C.C.\npipes with collars jointed with stiff mixture of cement mortar in the\nproportion of 1:2 (1 cement : 2 fine sand) including testing of joints\netc. complete :150 mm dia. R.C.C. pipe15Nos
2727Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.10.5Nos
2828Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (In cement mortar)69.48Nos
2929Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)13.5Nos
3030Supplying and stacking at site. Good earth. (LS)21Nos
3131Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement\nconcrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand),finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :\n19.21.1 For pipes 100 to 250 mm diameter1Nos

AI Tender Summary

OUR REF NO 27731525
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 27-04-2021
Authority
Authority Name East Delhi Municipal Corporation
Work Description Procurement Of Fixed Compactortransfer Procurement Of Fixed Compactortransfer Station With Shifting Mechanism Complete Set Through Gem Under Urban Development Fund ( Udf ) . Sub Head Construction Of Facilities And Shade For Fixing Fcts Near 162 30E Jwala Nagar Shamshan Ghat In Ward No . 30E
Basic Detail
Tender No NIT No. EE(M)-2/SHAH.SOUTH /21-22/04/01
Bidding Type Tender
Location
City WORK
State Delhi
Key Dates
Publish Date 22 Apr 2021
Submission Date 27 Apr 2021
Open Date 28 Apr 2021
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 46200
Exemption Not Available
Document List
09D74BDE-E378-4BC3-B02B-74775F97F6B3.html
Tendernotice_1.pdf
BOQ_82525.xls
GeneralRules.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 22, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Apr 27, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Apr 28, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

09D74BDE-E378-4BC3-B02B-74775F97F6B3.html

pdf

Tendernotice_1.pdf

xls

BOQ_82525.xls

pdf

GeneralRules.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders