Public Works Department-PWD has published Renovation Of Internal Water Supply Line And Repair And Maintenance Of Old Toilet Block Of Old Building And Ss Block At Agmc And Gbp Hospital. ( 2Nd Call ) . Submission Date for this Tender is 30-04-2021. Water Pipe Line Tenders in AGMC AND GBP HOSPITAL. Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - |
| 2 | All work upto plinth level- |
| 3 | a) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20mm nominal size) |
| 4 | 12 mm cement plaster in mix |
| 5 | i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 6 | Neat cement punning. |
| 7 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 8 | Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. |
| 9 | Anti-Skid Tiles Ceramic Tiles 1st quality 300 x 300mm in all shades and designs |
| 10 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for replastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- incharge. |
| 11 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete |
| 12 | Distempering with 1st quality acrylic washable distemper of approved brand and manufacture and of required shade on old work ( one or more coats ) to give an even shade as required complete as per direction of the Engineer in charge. |
| 13 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation ofsurface as required complete as per direction of the Engineer in charge. |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture, of required shade and colour complete, as per manufacurer"s specification. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] |
| 15 | Two or more coats on new work. |
| 16 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 17 | New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 18 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. Internal work - Exposed on wall. |
| 19 | 15 mm dia. nominal bore |
| 20 | 20 mm dia. nominal bore |
| 21 | 25 mm dia. nominal bore |
| 22 | 40 mm dia. nominal bore |
| 23 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. Complete as per CPWD specification and direction of the Engineer - in - charge. External work |
| 24 | 40 mm dia. Nominal bore |
| 25 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 26 | 15 mm dia. Nominal bore |
| 27 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 28 | i) 15mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 29 | Providing and fixing unplasticized PVC connection pipe with brass unions: |
| 30 | (a) 30 cm length |
| 31 | i) 15 mm nominal bore |
| 32 | Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete. |
| 33 | 15 mm dia. Nominal bore |
| 34 | 25 mm dia. Nominal bore |
| 35 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 36 | 15 mm dia. Nominal bore |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S tap. 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforminh to Is: 7231, with allm fittings and fixtures complete including cutting and making good the walls and floors wherever required. |
| 38 | i) white vitreous china Orrisa pattern W.C pan os size 580 x 440 mm with integral type toot rests. |
| 39 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 40 | 10 litre capacity - White |
| 41 | Providing and fixing G.I intel connection for flush pipe connection with W.C pan |
| 42 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the wallsand floors wherever required : |
| 43 | W.C. pan with ISI marked white solid plastic seat and lid |
| 44 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : |
| 45 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 46 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. |
| 47 | i) Flexible pipe 32 mm dia.. |
| 48 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with6 mm thick hard board backing : |
| 49 | Rectangular shape 453x357mm |
| 50 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the Engineer - in - charge.(New work) |
| 51 | 15 mm dia. nominal bore |
| 52 | 20 mm dia. nominal bore |
| 53 | 25 mm dia. nominal bore |
| 54 | 40 mm dia. nominal bore |
| 55 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 56 | White solid plastic seat with lid |
| 57 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 58 | ProvidingandfixingonwallfaceunplasticisedRigidPVCrainwater pipes (working pressure 4 kg / cm2)conformingto IS : 13592 Type Aincludingjointingwith sealring conformingtoIS:5382leaving10mmgapforthermalexpansion: |
| 59 | Single socketed pipe - 75 mm OD |
| 60 | Single socketed pipe - 110 mm OD |
| 61 | Providingandfixing on wallface unplasticised - PVCmouldedfittings/ accessoriesfor unplasticised Rigid PVC rain water pipes conforming to IS:13592TypeAincludingjointingwith sealringconformingtoIS: 5382 leaving 10 mm gap forthermalexpansion: |
| 62 | Single equal tee with door |
| 63 | i) 75x75x75 mm |
| 64 | ii) 110x110x110mm |
| 65 | Providing and fixing brass full way valve (ISI mark) with wheel of approved quality as per direction of the Engineer in charge. |
| 66 | Agreement no: T/33/SE(project)/EE/MCD/PWD(R&B)/2016-17 |
| 67 | 40 mm nominal bore |
| 68 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. |
| 69 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-incharge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). |
| 70 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. |
| 71 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 72 | Providing and fixing C.P. brass pillar cock (long neck with aerator) of approved quality conforming to IS:8931 :(Jaquar make code no. CON021KN) |
| 73 | 15 mm nominal bore |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
