Providing Premix Carpet From Main Gate To Western Gate , Casualty Approach , Mri Approach Road And Widening And Providing Premix Carpet Of Approach Road From Mortuary Gate Upto Dept Of Psychiatry Crossing , Providing Road Studs With Lense Reflector, As Per Tender Document-Manipur
TDR : 27692710
Tender Notice
BOQ
Expired
As Per Tender Document
Manipur
Providing Premix Carpet From Main Gate To Western Gate , Casualty Approach , Mri Approach Road And Widening And Providing Premix Carpet Of Approach Road From Mortuary Gate Upto Dept Of Psychiatry Crossing , Providing Road Studs With Lense Reflector
Name of Work: <Providing premix carpet from Main Gate to Western Gate, Casualty approach, MRI approach road and Widening and providing premix carpet of approach road from Mortuary Gate upto Dept of Psychiatry crossing, providing road studs with lense reflector and painting road markers with thermoplastic paint, RIMS, Imphal.>
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m
item1
2
1.1
Hard / dense soil
item2
213.06
cum
3
2
Providing laying and compacting granular base/ sub - base according to to lines, grade and cross section by using naturally occurred sand gravel/ conforming ti IRC Grading -II of MOST specification free from organic or other deleterious constituents compacted by rolling with power roller of 8 to 10 tonne capacity in layers not exceeding 150 mm ( spread thickness ) i/c rolling of the road surface to proper level and grades 30 cm width edging on both sides etc. complete as directed by the Engineer -in - charge.
item3
106.55
cum
4
3
Providing and laying bituminous macadam of 50 mm as per clause 504.1 of \"MOST\" specification for base course with binder content @ 4% by weight of total mix including preparation of bases excluding filling of pot holes, cleaning the surface with wire brushes etc. and providing suitable edge supports heating of binder and aggregate handling of materials, screening, mixing, in hot mix plant conforming and transporting laying and finishing with paver finisher to the required level, grade and camber, rolling by power roller etc. complete including running expenses of all plants.
item4
5
3.1
Using bitumen (80/100)
item5
35.53
cum
6
4
Preparing surface by brushing with wsire brushes for removing caked mud etc. sweeping with brooms and finaly fanning the cleaned surface with gunnybags to removed all loose dirt etc.
item6
7
4.1
Black Topped surface
item7
8224.49
sqm
8
5
Providing and applying evenly a premix / tack coat with bitumen ( 80/100)
item8
9
5.1
(a) 10kg / 10sqm
item9
8224.49
sqm
10
6
2 cm consolidated thick single coat pre-mix carpet surfacing with 0.27 cum stone chipping 12.0 mm size 0.19 cum and 10 mm size 0.09 cum mix with 14.6 kg of binder per 10.00 sqm of road surface and rolling complete including a seal coat IRC type \"B\" with 0.06 cum of fine aggregate and 6.8 kg of bitumen 80/100 per 10.00 sqm of road surface using H.M. plant & paver finisher.
item10
11
6.1
Using bitumen (80/100)
item11
9984.49
sqm
12
7
Road Markers/Rod Stud with Lense Reflector
item12
13
7.1
Providing and fixing of road stud 100x 100 mm die cast in aluminum, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973
item13
14
7.2
Light reflecting lense type
item14
724
each
15
8
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous surface
item15
16
8.1
Providing and laying of hot applied thermoplastic compound of 2.5 mm thick i/c reflectorising glass beads @ 250gms per sqm are, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level, uniform and free from streaks and holes.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
