|
| 1 | Providing supplying and installing in position as per approved layout and instructions given by In-Charge, with all the necessary require fixtures, fittings, support system require to install to make system functional etc. complete. 10 mm copper pipe OD 0.7 Lloyd’s with allimported copper fittings Per Feet |
| 2 | Providing supplying and installing in position as per approved layout and instructions given by In-Charge, with all the necessary require fixtures, fittings, support system require to install to make system functional etc. complete.15 mm copper pipe OD 0.9 Lloyd’s with allimported copper fittings Per Feet |
| 3 | Providing supplying and installing in position as per approved layout and instructions given by In-Charge, with all the necessary require fixtures, fittings, support system require to install to make system functional etc. complete. for 22 mm copper pipe OD 0.9 Lloyd’s withall copper fittings Per Feet |
| 4 | Providing supplying and installing in position as per approved layout and instructions given by In-Charge, with all the necessary require fixtures, fittings, support system require toinstall to make system functional etc. complete. Do as above for 28 mm copper pipe OD 0.9 Lloyd’s with all copper fittings Per Feet |
| 5 | Isolation Valve with all brass fittings 15 mm |
| 6 | Isolation Valve with all brass fittings 22 mm |
| 7 | Isolation Valve with all brass fittings 28 mm |
| 8 | Providing, supplying and installation of 4 By 4 Oxygen Manifold with NRV Including |
| 9 | Oxygen Manifold –to comply with relevant standards, with minimum maintenance:• Open manifold system.• 20 X 20 oxygen cylinder: Oxygen manifold.• High pressure connecting pipes made up of annealed copper pipes with integrated non- return valvesfor connection of 12 gas cylinders on the left and right cylinder bank side each.• End of the pipe shall be capped to accommodate future expansion.• The cylinders are to be connected to the high-pressure connecting pipe using high-pressure flexiblepipes using brass connections with washers• All should be brazed construction for maximum leak prevention.• The cylinders are to be placed on floor. |
| 10 | Semi-Automatic Control Panel – Oxygen• Control panel will have two first stage regulators each capable of delivering 100 - 200 psig outlet pressure. It should comply international standards: HTM 02-01/NFPA-99/ISO 7396-1• Both the first stage regulators in the oxygen control panel will have non-halogenated polymer in the high pressure side to ensure that there will be no ignition due to adiabatic compression. Furthermore,40 micron filter should be provided at the inlet ofeach high pressure regulators of the oxygen control panel.• The first stage regulators will be connected to a common second stage regulator which will deliver an outlet pressure of 60 psi g.• The first two regulators meant for first stage will be capable of switchover system incorporated from “RUNNING” to “RESERVE” bank due to differential pressure.• The control panel will provide for two individual content contact pressure gauges to indicate the cylinder pressure in the two wings of the manifold and common pressure gauge to indicate the delivery / line pressure.• The control panel will have built in audio-visual signal lamp indications for bank changeover• The control panel will be covered with aesthetically suitable cover for safe operation indicating the respective services.• Control panel will have built in transformer to ensure safe operation by low voltage.• Oxygen Control Panel will have in built heating arrangement to ensure that there will be no freezing in the delivery line during high flow requirement. |
| 11 | Fully-Automatic Control Panel – Oxygen:• Control panel will have two first stage regulators each capable of delivering 100 - 200 psig outlet pressure. It should comply international standards: HTM 02-01/NFPA99/ISO-7396-1• Both the first stage regulators in the oxygen control panel will have non-halogenatedpolymer in the high pressure side to ensure that there will be no ignition due to adiabatic compression. Furthermore, 40 micron filter should be provided at the inlet of each high |
| 12 | pressure regulators of the oxygen control panel.• The first stage regulators will be connected to a common second stage regulator which will deliver an outlet pressure of 60 psi g.• The first two regulators meant for first stage willbe capable of switchover system incorporated from “RUNNING” to “RESERVE” bank due to differential pressure.• The control panel will provide for two individual content contact pressure gauges to indicate the cylinder pressure in the two wings of the manifold and common pressure gauge to indicate the delivery / line pressure.• The control panel will have built in audio-visual signal lamp indications for bank Changeover.• The control panel will be covered with aesthetically suitable cover for safe operation indicating the respective services.• Control panel will have built in transformer to ensure safe operation by low voltage. |
| 13 | Providing supplying and installing in position Single Stage Double Gauge Nitrous OxideRegulator with all necessary fittings to make system functional. |
| 14 | Providing supplying and installing in position Single Stage Double Gauge OxygenRegulator with all necessary fittings to make system functional. |
| 15 | Tail Pipe Copper |
| 16 | Tail Pipe Flexible |
| 17 | IOX-14 Mox Regulator |
| 18 | Pressure Gauge for Pipe Line (0 To 250) |
| 19 | Low Pressure Gauge for Pipe Line (0 To 16) |
| 20 | High Pressure Contact Gauge Electrical Oxygen (0 To 250) |
| 21 | High Pressure Contact Gauge Electrical Nitrous Oxide |
| 22 | Vacuum Tank Pressure Switch RT 121 |
| 23 | Vertical Cylindrical Received Tank Water Cap 500 Ltr |
| 24 | Gas outlets [Terminal units] for Oxygen, Air & Vacuum Nitrous Oxide :• Integral check value.• All the terminal units shouldn’t be inter changeable.• Two level locking mechanism.• Operating pressure more than six bar.• Minimum withstand pressure =13bar • Shall be complying with EN 737 pressure test standard.• Should be cleaned de-greased for medical gas service, factory assembled and tested.•Individually tested & certified• Body shall be one piece brass construction.• Full range of mounting.• Colour coding as per existing standard/any international standard.• All outlets shall be of HTM0201BS/equivalent standard• The product should be CE/BIS certified.• Manufacturer should be ISO 13485 certified.Following are the Specifications for supply, installation, testing & commissioning of Medical GasPipeline from the MGPS plant room to different units and floors. |
| 25 | BPC Flow meter with Humidifier:• Back Pressure Compensated flow meter will be of accurate gas flow measurement with followingfeatures:• Control within a range of 0 – 15 lpm (calibration within +/- 10%)• It should meet strict precision and durability standard.• The flow meter body should be made of brass chrome plated materials.• ·The flow tube and shroud components should be made of clear, impact resistant polycarbonate.• Flow Tube shall have large and expanded 0 – 5 lpm range for improved readability at low flows.• Inlet filter of stainless steel wire mesh to prevent entry of foreign particles.• The humidifier bottle shall be made of polycarbonate material and autoclavable at 121 degree Centigrade temperature. Product should be CE/ BIS approved.• Manufacturer should be ISO 13485 certified |
| 26 | Single Pipe Line Adaptor |
| 27 | Twin Pipe Line Adaptor |
| 28 | Safety Key Plugs (Schrader Type) (Oxygen, Vacuum ,Nitrous Oxide ,Air) |
| 29 | Providing supplying and installing in position Ward Vacuum Unit 600 ml with Regulator |
| 30 | Providing supplying and installing in position Ward Vacuum Unit 1000 ml with Regulator |
| 31 | Providing supplying and installing in position Ward Vacuum Unit 2000 ml with Regulator |
| 32 | Theatre Suction Trolley with Ward Vacuum Unit 2000 ml Double Bottleswith Regulator |
| 33 | Yankauer Suction Set Connecting tube are made from PVC .Anti-kinkin tube to avoidblocking under high pressure |
| 34 | Oxygen Hood |
| 35 | Oxygen Mask Single Use & Latex Free |
| 36 | Oxygen Nasal Cannula Single Use& Latex Free |
| 37 | High Pressure Tubing 6mm ID ( White, Yellow ,Blue, Gray) Per Meter |
| 38 | Spanner ‘B’ Type |
| 39 | Key for Pin Index Cylinder |
| 40 | Key forO2, CO2 NO2 Cylinder |
| 41 | Both Side 28 No Spanner for Cylinder Bull Nut |
| 42 | ScrewSpanner 10” |
| 43 | NRV of Tanks |
| 44 | PVC Pipe 6mm ID 10mm OD Per Meter |
| 45 | Providing supplying and installing Medical Gas Area Line Pressure Alarm with allnecessary supporting to make system functional. 2 Gas |
| 46 | Providing supplying and installing Medical Gas Area Line Pressure Alarm with allnecessary supporting to make system functional. 3 Gas |
| 47 | Providing supplying and installing Medical Gas Area Line Pressure Alarm with all necessary supporting to make system functional. 4 Gas |
| 48 | Area Two Gas Join-Box |
| 49 | Area Three Gas Join-Box |
| 50 | Area Four Gas Join-Box |
| 51 | Flow Meter with “S” Humid fire BottlesSpinier (F.A. Valve) |
| 52 | “S” Humid fire Bottles |
| 53 | Digital Alarm System :Four Channel Microprocessor Controlled Alarm for Pneumatic & Vacuum Services should have the following features:• Digital Display of Line Pressure for all the services with factory calibrated pressure sensors.• Color coded LED Display of Line pressure status (High – Caution – Normal – Caution– Low)• Audible Alarm for High & Low pressure condition• Test and Alarm Acknowledge (Mute) facility.(Alarm acknowledge (Mute) time span is programmable from 1 to 60 min).• Programming facility of alarm limits from front panel (Password protected).• Facility to connect to remote alarm box by potential free contacts provided in the alarm box.• Small and compact design. Light Weight (3 kg)• Imported highly sensitive gas pressure sensors & USA/CE marked power supply.• Mounted on a powder coated MS box.• Nut & Nipples are to be provided for connection |
| 54 | 5 HP Vacuum PumpProviding, supplying and installing in positionequivalent make, air cooled, reciprocating Vacuum Pump as per specification mentioned below,Rate includes all accessories, fittings and fixtures require to make the system functional. Etc. complete.Conversions: Volume:1cfm=28.32lpm, 1m3/hr=0.5885cfm, Pressure:1kg/cm2g=14.223psig,1Bar=14.5 psig |
| 55 | 03) Air CompressorProviding, supplying and installation of reciprocating Air Compressor with oil free 5HP air compressor of Make as per following configurations.Conversions: Volume:1cfm=28.32lpm, 1m3/hr=0.5885cfm, Pressure:1kg/cm2g=14.223psig1Bar=14.5 psigTechnical Specifications Details mention in NIT |
| 56 | Dryer/Filter/Regulator SystemThe duplexed filter and dryer module shall incorporate high efficiency water separators, oilfilters, heatless regenerative desiccant dryer dust/activated carbon filters, hopcolite filters andanti-bacterial filters with autoclavable element. Electrical contacts shall be installed on the filters to provide warning alarms on the dryer controller in the event of high pressure drop (ie blockage) and shall also include connections for BMS. Contaminants in the delivered air downstream of the bacterial filters shall be maintained at levels below those shown in the following table: Contaminant ThresholdH2O 67 ppm v/vDry particulates Free from visibleparticulates in a 75 litre sampleOil (droplet or mist) 0.1 mg/m³CO 5 ppm v/vCO2 500 ppm v/vSO2 1 ppm v/vNO 2 ppm v/vNO2 2 ppm v/vDryer Purge ControlThe dryer control system shall incorporate a Purge Saver Energy Management system that freezes the regeneration of the desiccant once adequate dew point is reached in the inactive tower. Only when the dew point level in the active tower deteriorates to an unacceptable level, will the intelligent controller switch towers. This shall be achieved by including an additional dew point sensor and associated software in the dryer controller to effectively manage thesystem as well as providing on screen measurements of purge savings. |
| 57 | Bed Head Panels for ICU/HDUBed Head Panels horizontal/ vertical It should have the following features- Minimum length 1.2 meter. Efficient, safe & Robust design in extruded 19luminium section. Smooth curved surfaces, with acceptable colour choice Should have an integrated rail system to mount accessories Segregation of services i.e. low voltage supplies, high voltage supplies, and medical gases should be maintained throughout. Entire pipe line should run in continuous horizontal panels with no break for each unit & length as perarea where it has to be installed. Facility as per under -Oxygen -2, Vacuum-1, Medical air -1, Infusion pump mount pole with adopter for mounting at least twopumps. - Electrical outlets- 6. Combined 15/5 |
