Providing And Installation Of R.O.Unit With Water Station Cabine At Ayata Tq. Arni Dst. Yavatmal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Apr 2021
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ARNI → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Installation Of R.O.Unit With Water Station Cabine At Ayata Tq. Arni Dst. Yavatmal
BOQ
| Sl. No. | Item Description |
| 1 | SUBWORK 1- RO UNIT |
| 2 | Supply and installation of R.O water purifier having capacity 500L/Hr working on both card and Coin system with water tank for raw water including supplyinstallation and Periodic maintenance for 1 year complete as per directed by site incharge Maintenance costincludes electric charges & & manpower required for maintenance.(Estimate prepared as per E-Tender) |
| 3 | 1) Raw water Pump 500 LPH 0.5 HP2)sand filter10\" Dia.* 54\" mm 3) carbon filter 10\" Dia.*54\" mm4)micron filter 5 mic 20\"5) electric panal 1-1 singal Phase 6)anti scalatant dosing pump0 to 6 LPH 7) rota meter 0 TO 1200LPH8)pressure guse 0 to 7 kg/cm2 9)Membrane40/40(2 no.) 10) Pressure vessel 80/4011)high pressure switch12) low pressure switch13)flooty 14)UV System for 500 LPH15)High Pressure Pump 1.5 HP16) Pure Water Pump 0 .5 Hp |
| 4 | Providing andfixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery upto destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tank scapacity between 200 to 1000 litersPWD SSR19-20 It.No. 42.53 P.No. 358 (Basic rate 13.00) |
| 5 | Providing andfixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery upto destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tank scapacity between 200 to 1000 litersPWD SSR19-20 It.No. 42.53 P.No. 358 (Basic rate 13.00) |
| 6 | water ATM Machine With Card |
| 7 | Providing And Installation of chillar plant of 2 tone capacity |
| 8 | SUBWORK 2- TIN SHED |
| 9 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparingthe bed for foundation and excluding backfilling, etc. complete.Lift 0 to 1.50 M. |
| 10 | Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of50 M and lifts as below, stacking and spreading as directed byEngineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling etc.complete. |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to beprovided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) tc.complete. With natural sand/V.S.I. quality Artificial Sand |
| 12 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc.Complete. |
| 13 | Providing and laying cast in situ / Ready Mix Cement Concrete M-25 for double rim bored pile of 300 mm dia. each of load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth through all strata except rock, excluding provision of reinforcement includingplacing with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand by concrete prepared in reversible drum type concrete mixer by tremie arrangement, compaction of concrete including chipping and dressing etc. complete.(Excluding steel reinforcement) |
| 14 | Filling in plinth & floors/trenches with Contractor\"s murumforbeddingin15 cmto20 cm layers including watering and compaction etc. complete. |
| 15 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete. |
| 16 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, wateringetc. complete. |
| 17 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622- 2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curing and clearing etc. complete. a) Flooring |
| 18 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 19 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 kg. to 20 kg. Per Sq.m.) Spec.No.: As directed by Engineer- in-charge. |
| 20 | Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, oil painting two coats complete. |
| 21 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc.and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete. |
| 22 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). |
| 23 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 24 | SUBWORK 3 - ON GRID SOLAR PACK SYSTEM 5 KW |
| 25 | Suppling and erecting submersible pumpset sutibal four 150mm dia. Borewell of required hp with 230 v 50 cycles AC suitable for 42 to 20 headat 30 to 90 LPM discharge & max.efficiency at 34 m head and 60 LPM discharge and delivery pipe of necessary diameter with a necessary H type clamp as specition WP-SMP itemNO 12-3-34 pag253 pwd ele csr 2017-18 1HP |
| 26 | Providing and Fitting 2.5 sqmm Cable PVC Insulated( As per description inMJP CSR pno 67) |
| 27 | G.I.Bend ( As per description inMJP CSR) |
| 28 | Clam( As perGSDA Approved rates) |
| 29 | Suppling and erecting automatic control pannel for 1 hp 230 volt - AC submersible pump set up to 2 hp consisting of dol starter of suitable relay rang spp combined ammeter /volt meter phase indicating lamp inclosed in crca powder coated vibration proof encloser with ip 54 protction control panel should offer single phasing reversel phase inbalance etc.(similar to LT model no. MRG2) it.no.12-5-20 p.no.263 2017-18 |
| 30 | Provinding ISI Mark HDPE pipe of folling Class and dia including all local and central Taxes,octroi inspeation charges with E.P. Transpoation to stores ect PWD Electric DSR item no 6 /72017-18 32 mm – 77 RMT |
| 31 | Providing and installationof Sign Board |
| 32 | Electrification charges |
AI Tender Summary
Tender Timeline
Apr 16, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedApr 21, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 22, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender