| 1 | 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | | 2 | Cum |
|---|
| 2 | 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | | 80 | Sqm |
|---|
| 3 | 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | | 2 | Cum |
|---|
| 4 | 4 | Centering and shuttering including strutting, propping etc. and removal of form for : | | | |
|---|
| 5 | 4.01 | Suspended floors, roofs, landings, balconies and access platform | | 8 | Sqm |
|---|
| 6 | 5 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). | | 18 | Sqm |
|---|
| 7 | 6 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections | | 20 | m |
|---|
| 8 | 7 | Grading roof for water proofing treatment with | | | |
|---|
| 9 | 7.01 | Cement mortar 1:4 (1cement : 4 coarse sand) | | 1 | Cum |
|---|
| 10 | 8 | Supplying and mixing integral liquid water proofing compound such as Dr Fixit Pidiproof LW+ of Pidilite or equivalent conforming to IS: 2645 in cement for cement concrete/ RCC/ plaster/ mortar etc as recommended by the manufacturer complete as per direction of Engineer-in-charge. | | 5 | Ltr |
|---|
| 11 | 9 | 12 mm cement plaster of mix : | | | |
|---|
| 12 | 9.01 | 1:6 (1 cement: 6 coarse sand) | | 80 | Sqm |
|---|
| 13 | 10 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : | | | |
|---|
| 14 | 10.01 | Water thinnable cement primer. | | 50 | Sqm |
|---|
| 15 | 11 | Finishing walls with Acrylic Smooth exterior paint of required shade : | | | |
|---|
| 16 | 11.01 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). | | 88 | Sqm |
|---|
| 17 | 12 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: | | | |
|---|
| 18 | 12.01 | Two or more coats on new work. | | 50 | Sqm |
|---|
| 19 | 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | | 130 | Sqm |
|---|
| 20 | 14 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | | 50 | Sqm |
|---|
| 21 | 15 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. | | | |
|---|
| 22 | 15.01 | Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : \n\n(a) 3 mm thick \n | | 60 | Sqm |
|---|
| 23 | 16 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. | | | |
|---|
| 24 | 16.01 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer | | 25 | Sqm |
|---|
| 25 | 16.02 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. | | 4 | Sqm |
|---|
