Restoration Of Facade Work In Heritage Walk Area , Chowkri Modi Khana , Jaipur Phase -Ii
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 May 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
JAIPUR → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Restoration Of Facade Work In Heritage Walk Area , Chowkri Modi Khana , Jaipur Phase -Ii
BOQ
| Name of Work: Restoration of Façade Work in Heritage Walk Area, Chowkri Modi Khana, Jaipur.PHASE 2 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of\nunserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer.In lime mortar | Sqm | 10 | cum |
| 2 | 2 | Carriage of Materials by mechanical transport including loading, unloading and stacking :Sand, bazri, ballast, kankar Upto 20 km | RMT | 200 | cum |
| 3 | 3 | Scraping & Removing of white wash/ distemper/oil paint /algli etc.\nfrom lime plaster highly decorative, ornamental and stucco work with\nat most care by using fine sand paper under the close supervision to\nkeep intact the old designs. | Cum | 15550 | Sqm |
| 4 | 4 | Random Rubble stone masonary for superstructure, 4.50mtr. Height above plinth level/ one storey height above 30cm. thick walls in : Lime surkhi mortar 1:2 ( 1 Lime putty : 2 Surkhi including adding admixture like gur, methi etc. in mortar.) | 10 | cum | |
| 5 | 5 | Brick work with FPS bricks of class designation 75 in superstructure\nabove plinth level upto two stories in all shapes and sizes in: Cement mortar 1:4 (1 cement : 4 coarse sand) | 10 | cum | |
| 6 | 6 | Providing and Fixing fine dressed sand stone /approved stone \"Chajja\" for palaces,chattries,forts and jharokas with fine dressed surface both sides and front edges should be round shape/moulding, fixing in grinded lime surkhi mortar 1:2 joint flush with proper adhesive with pigment to match the shade of stone (thickness of chajja on front edge 50mm and 75mm on fixing end) exposed surface is to be measured only. | 20 | Sqm | |
| 7 | 7 | Making Bend -patta, Cornice, Gola & String course with katla stone and Lime surkhi mortar 1:2 (projected ) and finishing with grinded Lime surkhi mortar 1:2 including moulding/ design work as per existing matching at site complete in all respect.Size 15cm X 10cm. | 100 | rmtr | |
| 8 | 8 | Stone work, plain in copings, cornices, string courses and plinth\ncourses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6\ncoarse sand) including pointing with white cement mortar 1:2 (1\nwhite cement : 2 stone dust) with an admixture of pigment matching\nthe stone shade. Red sand ston. | 3 | cum | |
| 9 | 9 | Providing and fixing stone jali 40mm thick throughout in cement\nmortar 1:3 (1 cement : 3 coarse sand) including pointing in white\ncement mortar 1:2 (1 white cement : 2 stone dust) with an admixture\nof pigment, matching the stone shade, jali slab without any chamfers\netc.:Red sand stone | 20 | Sqm | |
| 10 | 10 | Tuman masonry by brick bats/ stones in grinded mortar of Lime\nSurkhi mortar 1:2/lime sand mortar 1:2 including racking and\nremoval of all old loose plaster and cleaning the wall surface\nproperly as per direction of Engineer In-charge. | 50 | Sqm | |
| 11 | 11 | Stucco work in lime, Surkhi, mortar (1:2) as per existing design work/\ntraditional practices by skilled craftsman, the stucco work should be\ndone as per restoration nature, the mortar should be prepared by\ngrinding mill adding gur, methi & gugal.. The thickness varies from\n50 mm to 100mm as per the design (minimum rectangular surface\narea to be measured). | 40 | Sqm | |
| 12 | 12 | P & L Lime Surkhi Plaster lime surkhi mortar 1:2 (1 Lime : 2 Surkhi)\nincluding preparation of mortar by traditional practice (by grinding) in\nspecified course for base coarse and subsequent course & Loi,\ntamping, beating, curing till the shrinkage cracks are disappear. The\nwork is to be done with all lead as the work is of restoration nature\nas per Jaipur practice including adding gur, methi & gugal on old\nwalls including removal of all old loose and decade plaster, each\ncoat to be done after 3 days of previous coat.:45 mm thick in four coats | 3000 | Sqm | |
| 13 | 13 | Add extra for decorative/ornamental Lime surkhi 1:2 plaster work with fine finish making kangoora, flowers, geometrical designs upto (khat) including preparation of Lime surkhi mortar 1:2 as per tradititional practice adding gur,methi,gugal etc.Upto 25mm thick/depth | 220 | Sqm | |
| 14 | 14 | Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually on lime base, on ceiling\nand all flat surface in two coats. First coat applying 3 mm to 4 mm\nthick and curing properly at least 7 days, second finishing coat done\nafter 7 days of previous coat as per traditional practice.(thickness\nnot more than 6 mm.) | 17000 | Sqm | |
| 15 | 15 | Providing & applying \"Lime Kara on stone work only\" having carving\nstone work /decorative stone work (stone pillars, stone arches,\nrailing etc.) as per traditional practice, as per specifications with\ngrinded mortar in two coats with finishing complete in all respect. | 700 | Sqm | |
| 16 | 16 | Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually (on lime surkhi/sand plaster base) on decorative/ornamental lime plaster in two coats.First coat applying 3mm to 4mm thick and curing properly at least 7 days,second finishing coat done after 7days of previous coat as per traditional practice.(thickness not more than 6 mm.) | 1300 | Sqm | |
| 17 | 17 | Coloured plain Araish work 1:2 (1 lime : 2 zikki) on lime plaster or\nplane back ground including preparation of lime for 6 months by\nslaking of lime with curd and changing the water every week. The\nKara plaster of not more than 6mm thick is to be left the maximum of\n3 months to appear the shrinkage & temperature cracks. Over the\nKara plaster 2mm layer of grinded lime putty is to be done and is to\nbe rubbed Gently by Akik stone. Then adding Khoppra & Ghee and\ninserting the design of colour boarder all round including desired\ncolour stone pigment to match the existing colour. | 70 | Sqm | |
| 18 | 18 | Conservation of fresco paintings in monuments by cleaning of the\npainted surface from all types of stains, dust, dirt, greasy & oily\naccretions etc. with the help of suitable chemicals, removal of\ncracks, consolidation of flaking paint layer and plaster, filling of the\nlacunae in the plaster, treatment of salt effect and altered paint layer\nretouching of the lost portions and providing a preservative coating. | 100 | Sqm | |
| 19 | 19 | Khamira Colour Washing as per old traditional practice to prepare\nthe Khamira the lime should be slaked at least for 7-10 days and\nregularly it should be stirred by adding cured, Gugal, for nonsynthetic\ncolour adding gum (babool gum) as per specification. Then\napplying prepared solution on walls three to four thin coats as\ndesired finishing. | 18500 | Sqm | |
| 20 | 20 | Providing and fixing double leaf Window wooden shutters made of Ist grade wood as per trditional design (Deshi pattern) planks thickness 25 mm and width of Binies, Andheri 35 mm ad 25 mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching/ as per approved design with moulding/ carving complete in all respect : Sheesham wood grade Ist.:M.P teak wood grade Ist | 20 | Sqm | |
| 21 | 21 | Providing, casting, curing, erecting and fixing in position Lime Jali (lime lattice ) 40mm to 50mm thick as per existing design and pattern with grinded lime surkhi mortar 1:2 adding gur, methi gugal etc. as per specification complete in all respect including all scaffolding. | 10 | Sqm | |
| 22 | 22 | P & F Sand-cast Iron (S.C.I.) Pipe (IS : 1729mark) of approved make in wall or in floor with M.S. holder bat clamps in 10 X 10 X 10 Cm. M-15 grade concrete blocks, joints filled with CM 1:4 with spun yarn including cutting holes and making good the wall: 100 mm dia | 400 | RMT | |
| 23 | 23 | P & F Sand-cast Iron (S.C.I.) Pipe (IS : 1729mark) of approved make in wall or in floor with M.S. holder bat clamps in 10 X 10 X 10 Cm. M-15 grade concrete blocks, joints filled with CM 1:4 with spun yarn including cutting holes and making good the wall: 100 mm dia : P &F S.C.I. Fittings (IS : 1729 mark) in CM 1:4 with spun yarn. 100mm-do-Tee | 15 | Each | |
| 24 | 24 | P & F Sand-cast Iron (S.C.I.) Pipe (IS : 1729mark) of approved make in wall or in floor with M.S. holder bat clamps in 10 X 10 X 10 Cm. M-15 grade concrete blocks, joints filled with CM 1:4 with spun yarn including cutting holes and making good the wall: 100 mm dia : P &F S.C.I. Fittings (IS : 1729 mark) in CM 1:4 with spun yarn. 100mm-do-Bend | 60 | Each | |
| 25 | 25 | Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 5.5 mm | 40 | Sqm | |
| 26 | 26 | Providing and Fixing fine dressed sand stone /approved stone \"Thambli\" (katahara pillers including) kalash on top,fixing on dasa as per existing design for fixing of stone jalies/railings including making grooves as per required size. (c) Size 150x150x750mm including kalash with moulding. | 10 | Each | |
| 27 | 27 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick\nbase of cement mortar 1:5 (1 cement : 5 coarse sand) including\npointing with cement mortar 1:2 (1 cement : 2 stone dust) with an\nadmixture of pigment to match the shade of stone.: Red sand stone | 50 | Sqm | |
| 28 | 28 | Painting with synthetic enamel paint of approved brand and\nmanufacture to give an even shade :\n Two or more coats on new work sqm 69.00 | 3000 | Sqm | |
| 29 | 29 | Providing and spray/brushing of Gur, gugal & methi solution for bonding of lime work as per specification (200gm gugal, 200gm belgiri powder, 200gm methi powder and 1 kg. Gur mixed in 20litre water and boiled and sttired till the solution volume reduce upto 3/4th) using 15.00litre solution in 10.00sqm. area. | 3300 | Sqm | |
| 30 | 30 | Painting new letters and figures of specified size, of any shade with\nfirst quality synthetic enamel paint, black or any other approved\ncolour to give an even shade as per clause 801 of MoRT&H\nSpecification including all material, labour: Hindi (Matras, Commas and the like not to be measured and paid for. Half letters shall be counted as half). | 4000 | cm\nheight\nper letter | |
| 31 | 31 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps\nincluding stacking the material within 50 metres lead :100 mm dia pipe | 50 | Rmt |
AI Tender Summary
Tender Timeline
Apr 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMay 06, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 07, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender