Military Engineer Services-MES has published Provision Of Tiling Work In Single Or Living Accn Of Ad Regd Wksp , Provn Of Refixing Of Steel Gates At Different Locations And Certain Other Revenue Works Under Age B/R-I Under Ge ( South ) Bathinda At Bathinda Mil Stn Provn Of Tiling Work In Single Or. Submission Date for this Tender is 03-05-2021. Tile Flooring Tenders in Bathinda Mil Stn Punjab. Bidders can get complete Tender details and download the document.
| Name of Work : PROVN OF TILING WORK IN SINGLE OR LIVING ACCN OF AD REGD WKSP, PROVN OF REFIXING OF STEEL GATES AT DIFFERENT LOCATIONS AND CERTAIN OTHER REVENUE WORKS UNDER AGE B/R-I UNDER GE(SOUTH) BATHINDA AT BATHINDA MIL STN | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 5 | Sqm | |
| 2 | 2 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/losse soil complete all as specified and directed. | 135 | Cum | |
| 3 | 3 | Returning filling in, approved soft/loose soil, including spreading , levelling, watering and well ramming in layers, each layer not exceeding 25cm in soft/loose soil complete all as specified and directed. | 76 | Cum | |
| 4 | 4 | Removing surplus excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. | 59 | Cum | |
| 5 | 5 | Material and labour for cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and sub base in floors etc complete all as specified and as directed. | 12 | Cum | |
| 6 | 6 | Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. | 35 | Cum | |
| 7 | 7 | Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in columns complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. | 30 | Cum | |
| 8 | 8 | Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) | 3200 | Kg | |
| 9 | 9 | All as per item No 8 here in before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders etc. complete all as specified and as directed. | 1100 | Kg | |
| 10 | 10 | Material and Labour for formwork for rough finish surface of flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. | 60 | Sqm | |
| 11 | 11 | Material and Labour for formwork for rough finish surface to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. | 200 | Sqm | |
| 12 | 12 | M & L for 25mm thick (measured solid) providing precast cement concrete type B-1, 1:2:4 using 12.5mm stne aggregate, louvres and jallies, set in cement mortor 1:4 including all mouldings complete all as specified and as directed. | 40 | Sqm | |
| 13 | 13 | Material and labour for brick work with fly ash old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4 complete all as specified and directed. | 15 | Sqm | |
| 14 | 14 | Material and labour for brick work with fly ash old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed. | 30 | Sqm | |
| 15 | 15 | Material and labour for 75 mm thick cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. | 50 | Sqm | |
| 16 | 16 | Material and labour for 25 mm thick cement concrete (1:2:4), type B-1 using 20 mm graded stone aggregate as in sub base complete all as specified and as directed. | 50 | Sqm | |
| 17 | 17 | Material and labour for non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles and including 15mm thick screed in CM 1:6 complete all as specified and as directed . | 50 | Sqm | |
| 18 | 18 | Material and Labour for glazed ceramic coloured tiles 350mmx250 mm x7mm/ 450mmx350mmx7mm/600mm x 300 x 7mm thick on vertical surfaces set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed. | 340 | Sqm | |
| 19 | 19 | M & L for Dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), about 40mm high, 75mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 as in vertical surfaces etc upto a height of 10 mtr to match over & including 10mm thick rendering in CM 1:4 including taking down old plaster/terrazzo finish/tiles/stone etc complete all as specified and directed. | 20 | Sqm | |
| 20 | 20 | Supply and fixing mild steel joist, channel, angle, or tee sections, fixed independently/welding with existing gates, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-410-W ( Gde- E-250) quality-B, complete all as specified and as directed. | 3300 | Kg | |
| 21 | 21 | M & L for preparation of old painted steel and iron surfaces of any description nototherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint, quality, colour on these surfaces complete all as specified & directed. | 500 | Sqm | |
| 22 | 22 | Taking down steel gate of any description exceeding 5.0 sqm and not exceeding 12 sqm each duly cutting of steel hinges from existing RCC fillers and finish thehold fast holes with PCC 1:2:4 to match with existing sufaces complete all as specified & directed. | 40 | Each | |
| 23 | 23 | Fixing only steel gate of any description exceeding 5.0 sqm and not exceeding 12 sqm each duly welding with necessary mild steel sections for hinges with existing steel joists ( steel sections used for hinges and holdfasts shall be measured and paid separately) and finish the holdfast holes with PCC 1:2:4 to match with existing surfaces complete all as specified & directed. | 40 | Each | |
| 24 | 24 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed. | 475 | Sqm | |
| 25 | 25 | Material and labour for non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles and including 15mm thick screed in CM 1:6 complete all as specified and as directed . | 475 | Sqm | |
| 26 | 26 | Material and labour for non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in vertical surfaces as in skirting etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles and including 10mm thick screed in CM 1:4 including taking down old plaster/terrazo finishes/old tile etc complete all as specified and as directed . | 46 | Sqm | |
| 27 | 27 | Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and refixing in the same opening after resecuring or easing & adjusting, complete all as specified and directed. | 6 | Per leaf | |
| 28 | 28 | Material and labour for 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and directed. | 110 | Sqm | |
| 29 | 29 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and as directed. | 66 | Sqm | |
| 30 | 30 | Material and labour for mild steel TMT bars 6 to 8mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) | 300 | Kg | |
| 31 | 31 | Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed. | 220 | Sqm | |
| 32 | 32 | Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed. | 10 | Sqm | |
| 33 | 33 | M & L cement concrete type B0 1:2:4 (20 mm graded aggregate) Ditto, in linels upto 1.5 m clear span, cills steps; seismic and other similor bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughd and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed. | 2.5 | Cum | |
| 34 | 34 | S & F sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x420mm bowl size 410mm x330mm x160mm complete all as specified and directed . | 40 | Each | |
| 35 | 35 | S & F 32/40mm waste fittings for stainless steel sink (sink coupling), brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed . | 40 | Each | |
| 36 | 36 | S&F PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm all as specified & directed. | 40 | Each | |
| 37 | 37 | Supply and fixing bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed . | 40 | Each | |
| 38 | 38 | Cutting existing steel tubing of bore 15mm for alterations or additions (Each cut measured) without taking down complete all as specified and as directed . | 40 | Each | |
| 39 | 39 | Cutting holes into or through brick walls built in cement mortar exceeding 150 sq cm but not exc 400 sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed . | 40 | Each | |
| 40 | 40 | Renewing non skid /glazed ceramic tiles in patches in floor or walls, area n. exc 5 sqm including cutting out broken tiles carefully, preparing beds and laying or setting, jointing & pointing new tiles complete all as specified & directed.(new tiles shall be paid at supply only rate separately) | 15 | Sqm | |
| 41 | 41 | Supply only glazed ceramic coloured tiles 450 x300 x7mm thick, complete all as specified and directed. | 0.75 | Per 100 Nos | |
| 42 | 42 | Supply only glazed ceramic coloured tiles 300 x200 x7mm thick, complete all as specified and directed. | 0.5 | Per 100 Nos | |
| 43 | 43 | Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed. | 80 | RM | |
| 44 | 44 | Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed . | 90 | RM | |
| 45 | 45 | Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm including enlarging existing tank outlet complete all as specified and directed . | 140 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
