Supply , Installation , Testing And Commissioning Of Laboratory Furniture For Computer Lab . At Govt . Degree College Banihal .

Tender Notice

27667127
Supply , Installation , Testing And Commissioning Of Laboratory Furniture For Computer Lab . At Govt . Degree College Banihal .
Indian
Jammu And Kashmir
15-04-2021
26-04-2021
27-04-2021

Tender Details

Supply , Installation , Testing And Commissioning Of Laboratory Furniture For Computer Lab . At Govt . Degree College Banihal . - C / D-Frame System \ Nall C / D-Frames Assemblies Should Be Manufactured From Standard Hollow Metal Sections; Confirming To I.S. Code 7138:1973 ( Indian Standard Specification For Steel Tubes For Furniture ) And All Sheet Metal Components Should Be Of Crca Confirming To Is Code 513:1994. \ Nthe Suspended Under-Bench Welded Units Should Be Supported On Heavy-Duty Steel Frames Fully Carrying The Load Of Worktops. Its Superior Strength Combined With Aesthetically Appealing End Caps Shall Give Maximum Flexibility And Modularity While Making A Layout. C / D-Frame Should Be Constructed From A Rectangular Pipe With A Cross Section Of 30Mm X 30Mm / 60Mm X 30Mm And Should Be A Minimum 1.6 Mm / 2.0 Mm Thick. The C / D-Frame Legs Should Be Supplied With Adjustable Feet ( Tolerance From -5Mm To +20Mm ) To Correct The Unevenness Of Flooring. The Tubular Enclosed Type Construction Shall Discourage Dust Accumulation And Unwanted Development Of Bacteria & Fungus. Drainage Gradient Should Be Well Adjusted Throughout The Length Of Table And Should Have Horizontal Supports For Drainage Systems. The Corner Units Shall Fit Well With 770Mm & 920Mm Table Depths. All Frame-Work Is Should Be Pre-Treated With Superior Pure Epoxy Powder Coated Finish. \ Nthe C / D-Frames Should Be For Suspended Storage Cabinets \ Nhorizontal Members \ Nthese Should Be Made From Rectangular Pipes Of 2Mm Thickness. Cross-Sectional Dimensions Of The Pipe Should Be 30Mm X 30Mm / 60Mm X 30Mm With A Minimum Of 1.6 Mm Thick. They Should Be Made Of Crca Ms And Coated With Pure Epoxy Powder. These Connect Two C / D- Frames Together As Shown Using C-Clamps / U-Clamps. Together With The C / D-Frames And Horizontal Members Connected Together, The Skeletal Structure Of The Work-Bench Is Formed On Which The Worktop Can Be Placed And The Hanging-Type Storage Cabinets Can Be Suspended. Horizontal Members Determine The Width Of The Lab Workbench As They Form The Member ( Distance ) Between Two Adjacent C / D-Frames. They Should Be Available In Various Widths Of 600, 900, 1200, 1350, 1500 Mm 2 2 Supply & Fixing Of Storage Boxes Of Measurements With 1 Shutter Of Size L-850 + 850 Mm X D-530 Mm X H-635 Mm Complete With Sefa-10 Compliant ‘C’ / ''D'' Frame System Having "C'' Legs & Connecting Sets As Per Technical Specifications, Made Up 100% Epoxy Powder Coated Crca Virgin Tata® Make Sheet, Powder Coating Thickness Of 50-60 Microns, Sheet Thickness Of 0.8 Mm For All Body. Shutters & Drawers In Sandwich Construction. All Modules Should Go In Knock Down Condition And Assembled And Fitted At Site. Shutters Must Have Exposed S.S.-304 Butt Hinges With Rotary Catcher Closing Mechanism ( Preferable With Pp Rollers To Have Longer Life ) . All Joinery Hardware Is To Be Of Ss-304 Bolting Systems. Handles Should Be “D” Type Made Up Of Ss-304, 8 Mm Thick Solid Rod, With Nickel-Chrome Plating And Further A Lacquer Coat. 3 No. 3 3 Providing & Fixing Horizontal Connecting Sets Should Comprise Of 4 Elements. One Front Connecting Beam & One Back Connecting Beam, Each Made Up Of 2 / 1.6 Mm Thick Sheet Formed In A “C” / ’D’ Section, Beams Are Removable. One Bottom Skirting Type Connecting Bar Of 160±10 Mm Height, & One Centre Beam Should Be Placed Between Back Beam & Skirting Beam. Together With The C / D Frames & Horizontal Members Connected Together, The Skeletal Structure Of The Work-Bench Is Formed On Which The Worktop Can Be Placed & The Hanging-Type Storage Cabinets Can Be Suspended 4 4 ( A ) L-1500 Mm Connecting Sets 1 No. 5 5 ( B ) L-1200 Mm Connecting Sets 24 No. 6 6 ( C ) L-900 Mm Connecting Sets 2 No. 7 7 ( D ) L-750 Mm Connecting Sets 1 No. 8 8 Supply And Fixing Of Knee Space Having One Footrest Made Up Of 1Mm Thick Sheet ( 25X50x25mm ''C'' Channel Type And Openable Back Cover Panel Of 0.8Mm Thickness With Length : 9 9 ( A ) L-750 Mm. Complete With Sefa-10 Compliant ‘C’ / ''D'' Frame System Having "C'' Legs & Connecting Sets As Per Technical Specifications 3 No. 10 10 ( B ) L-600 Mm . Complete With Sefa-10 Compliant ‘C’ / ''D'' Frame System Having "C'' Legs & Connecting Sets As Per Technical Specifications 48 No. 11 11 ( C ) L-450 Mm . Complete With Sefa-10 Compliant ‘C’ / ''D'' Frame System Having "C'' Legs & Connecting Sets As Per Technical Specifications 4 No. 12 12 Providing And Fixing Of All Side Cover Panels And Back Panels, Filler Panels To Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating. Size : 185Mm X835mm With 15Mm Bend On All Sides. 12 No. 13 13 Single Sided Crca Electrical Raceway Max L-2M, H-125 X D-85 Mm Top / Wall Mounted With 3 Nos. 6 Module Cut-Outs 40 Mtr 14 14 The Electrical Sockets Procured From Norisys / Legrand / Roma / Anchor Greathwhite Or Equivalent To Be Placed On The Face Of The Regent Rack, Without Wiring 58 No. 15 15 Providing And Fixing Of The Worktops Of Size 18Mm± 2 Mm Jet ( Z ) -Black Granite Of An Even Surface. The Exposed Edges Of The Granite To Be Chamfered And Smoothened With Underneath Neoprene Packing Of Size 6 Mm X 30 Mm So As To Have Dampening Effect And Better Absorption Of Vibration. 32 Sqm 16 16 Running Shelf Below Top Ofsize 750 X 250Mm With Brackets 40 Mtr

Key Value

Document Fees
INR 500 /-
EMD
Refer document
Tender Value
INR 7.20 Lakhs /-

BOQ Items

Name of Work: Supply, installation, testing and commissioning of Laboratory furniture for COMPUTER Lab. at Govt. Degree College Banihal.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 C/D-FRAME SYSTEM\nAll C/D-Frames assemblies should be manufactured from standard hollow metal sections; confirming to I.S. Code 7138:1973 (Indian Standard specification for steel tubes for furniture) and all sheet metal components should be of CRCA confirming to IS Code 513:1994.\nThe suspended under-bench welded units should be supported on heavy-duty steel frames fully carrying the load of worktops. Its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout. C/D-Frame should be constructed from a rectangular pipe with a cross section of 30mm x 30mm / 60mm x 30mm and should be a minimum 1.6 mm/2.0 mm thick. The C/D-Frame legs should be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. The tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus. Drainage gradient should be well adjusted throughout the length of table and should have horizontal supports for drainage systems. The Corner Units shall fit well with 770mm & 920mm table depths. All frame-work is should be pre-treated with superior pure epoxy powder coated finish.\nThe C/D-Frames should be for suspended storage cabinets\nHORIZONTAL MEMBERS\nThese should be made from rectangular pipes of 2mm thickness. Cross-sectional dimensions of the pipe should be 30mm x 30mm / 60mm x 30mm with a minimum of 1.6 mm thick. They should be made of CRCA MS and coated with pure epoxy powder. These connect two C/D- Frames together as shown using C-clamps/U-clamps. Together with the C/D-Frames and Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. Horizontal Members determine the width of the lab workbench as they form the member (distance) between two adjacent C/D-Frames. They should be available in various widths of 600, 900, 1200, 1350, 1500 mm
2 2 Supply & Fixing of Storage Boxes of Measurements with 1 Shutter of Size L-850 + 850 mm x D-530 mm x H-635 mm Complete with SEFA-10 Compliant ‘C’/'D' Frame System having "C' Legs & Connecting Sets as per Technical Specifications, made up 100% Epoxy Powder Coated CRCA Virgin TATA® make Sheet, powder coating thickness of 50-60 microns, Sheet Thickness of 0.8 mm for all body. Shutters & Drawers in Sandwich Construction. All Modules should go in Knock Down condition and assembled and fitted at site. Shutters must have exposed S.S.-304 butt hinges with Rotary Catcher closing mechanism (preferable with PP rollers to have longer life). All joinery Hardware is to be of SS-304 Bolting systems. Handles should be “D” type made up of SS-304, 8 mm thick Solid Rod, with nickel-chrome plating and further a Lacquer Coat. 3 No.
3 3 Providing & Fixing Horizontal Connecting Sets should comprise of 4 elements. One Front Connecting Beam & One Back Connecting Beam, each made up of 2/1.6 mm thick Sheet formed in a “C”/’D’ section, Beams are removable. One Bottom Skirting type connecting Bar of 160±10 mm height, & One Centre Beam should be placed between Back Beam & Skirting Beam. Together with the C/D Frames & Horizontal Members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed & the hanging-type storage cabinets can be suspended
4 4 (a)L-1500 mm Connecting Sets 1 No.
5 5 (b)L-1200 mm Connecting Sets 24 No.
6 6 (c)L-900 mm Connecting Sets 2 No.
7 7 (d)L-750 mm Connecting Sets 1 No.
8 8 Supply and fixing of Knee Space having one Footrest made up of 1mm thick sheet (25x50x25mm 'C' Channel type and openable Back Cover Panel of 0.8mm thickness with length :
9 9 (a) L-750 mm. Complete with SEFA-10 Compliant ‘C’/'D' Frame System having "C' Legs & Connecting Sets as per Technical Specifications 3 No.
10 10 (b) L-600 mm . Complete with SEFA-10 Compliant ‘C’/'D' Frame System having "C' Legs & Connecting Sets as per Technical Specifications 48 No.
11 11 (c) L-450 mm . Complete with SEFA-10 Compliant ‘C’/'D' Frame System having "C' Legs & Connecting Sets as per Technical Specifications 4 No.
12 12 Providing and fixing of all side cover panels and back panels, filler panels to be made from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. Size : 185mm x835mm with 15mm bend on all sides. 12 No.
13 13 Single Sided CRCA Electrical Raceway max L-2m, H-125 x D-85 mm Top/Wall Mounted with 3 Nos. 6 Module Cut-outs 40 Mtr
14 14 The electrical sockets procured from NORISYS / LEGRAND / ROMA / ANCHOR GREATHWHITE or equivalent to be placed on the face of the Regent rack, without wiring 58 No.
15 15 Providing and Fixing of the worktops of size 18mm± 2 mm Jet(Z)-black Granite of an even surface. The exposed edges of the granite to be chamfered and smoothened with underneath Neoprene packing of size 6 mm x 30 mm so as to have dampening effect and better absorption of vibration. 32 Sqm
16 16 Running Shelf below top ofSize 750 x 250mm with Brackets 40 Mtr
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2021 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail