A Mtc Of 75Mtr Master Road U E Daruhera Prov And Laying Of Gsb Wmm Prime Coat Dbm Tack Coat And Bc
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Apr 2021
0 days left
EMD
98300
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dharuhera → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Maintenance Of 75Mtr Master Road U E Daruhera Prov And Laying Of Gsb Wmm Prime Coat Dbm Tack Coat And Bc
BOQ
| Name of work :- A/Mtc. of 75mtr. Master Road U/E Dharuhera. “Prov. and laying of GSB, WMM, prime coat, DBM, tack coat & BC and all other work contingent there to”. A/C Rs. 49.15 Lacs | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | App.Item\nProviding and laying, spreading and compacting granular sub base material (250mm thickness as per design submitted by NIT Kurukshetra & attached herewith) compacted layer natural sand, murrum, gravel, crushed stone or combination thereof as per MORT&H specification in two layer (compacted) to 250 mm (125mm +125mm) by taking material 1.32 times of the thickness of the layer) confirming to clause 401 coarse graded grading-II as per table 400.2 of MORTH & H specification including spreading on the prepared sub grade with the help of motor grader or adequate capacity maintaining the required slope and grade during operation rolling with road roller 810 tonne with the grade and cross fall (camber) to be checked and any high spot or depressions which becomes apparent, correct by removing or adding fresh material, including cost of tools and plants carriage of material from stacks templates, barrier , lighting arrangement at night, chowkidar and maintenance of diversion etc. complete in all respect as per MORT&H specifications drawings and the instruction of the Engineer-in-charge. Density of GSB as laid 2gms/cc. (Mix in place method).\n | BI01010001010000000000000515BI0100001113 | 818 | per cum |
| 2 | 2 | App.Item\nProviding, laying spreading and compacting hand broken / crushed stone aggregate to wet mix macadam (thickness as per design submitted by NIT Kurukshetra & attached herewith) confirming to physical requirement laid in 400.11 of MORT&H specification in two layer (compacted) to 250 mm (125mm +125mm) by taking material 1.32 times of the thickness of the layer) including premixing of material with water in mechanical mix (pug Mill) carriage of mixed material by tipers to site and laying material in uniform thickness and spreading by motor grader of adequate capacity rolling with road roller 8-10 tonne in stages to proper grade and any spot or depression which comes apparent corrected by removing of adding fresh material and camber spreading and brooming including template, barrier, lighting arrangement at night chowkidar, maintenance of diversion etc. complete all respect as per clause 406 of MORT&H specifications drawing and the instructions of the Engineer-in-charge. Density of WMM as laid 2.2 gms/cc.\n | BI01010001010000000000000515BI0100001114 | 818 | per cum |
| 3 | 3 | App.Item\nProviding and applying primer coat with bitumen emulsion (medium bulk) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means as per clause 502 of MORT&H specifications | BI01010001010000000000000515BI0100001115 | 3270 | per sqm |
| 4 | 4 | Providing and laying of tack coat with bitumen 80/100 with 30 kg per 100 sqm on existing black top surface including cleaning the surface complete in all respect and entire satisfaction of the Engineer-in-charge. [including cost of bitumen] | BI01010001010000000000000515BI0100001116 | 3270 | per sqm |
| 5 | 5 | Dense Bituminous Macadam (70 mm thick) Providing and laying Dense bituminous macadam with 100-120 TPH Batch Type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. (Bitumen contents not less\nthan 4.5% & density to be achieved is 2.3)\n | BI01010001010000000000000515BI0100001117 | 564 | Per MT |
| 6 | 6 | Providing and laying of tack coat with bitumen 80/100 with 30 kg per 100 sqm on existing black top surface including cleaning the surface complete in all respect and entire satisfaction of the Engineer-in- charge. [including cost of bitumen]\n\n | BI01010001010000000000000515BI0100001118 | 3270 | per sqm |
| 7 | 7 | App.Item\nProviding and laying 40MM thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, (Grading II of MORT&H specification) premixed with bituminous binder 60/70 grade @ minimum 5.5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor as 60/70 control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. (Bitumen contents not less than 5.5%). The density of compacted layer shall not be less than 98% of the laboratory density of job mix formula.\n | BI01010001010000000000000515BI0100001119 | 310 | Per MT |
AI Tender Summary
Tender Timeline
Apr 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedApr 23, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 26, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender