Procurement Of Hardware Materials, Paradip-Odisha

Procurement Of Hardware Materials - 1 4 Paint Brush ( Nylon ) 2 2 Paint Brush ( Nylon ) 3 1 Paint Brush ( Nylon ) 4 Paint Brush Roller Type - 3 5 Emery Cloth ( Fine ) 220Grade ( 600 Mm X 300 Mm ) 6 Emery Cloth ( Fine ) 150Grade ( 600 Mm X 300 Mm ) 7 Emery Paper ( Smooth - 60 Size ) 8 Emery Paper ( Coarse - 120 Size ) 9 Crc-226 ( 500Ml ) Bottle With Spray System 10 Crc Lectra Clean ( 500Ml ) Bottle 11 Wd-40 ( Rust Remover ) 500 Ml. Bottle 12 Rastoline Spray ( 200Ml / Tin ) 13 White Petrolium Jelley 14 Distilled Water ( Each Container 20 Lit. ) 15 1 / 2 High Speed Haxsaw Blade 16 Hexsaw Blade Size- 1 / 2 X 12 17 35Mm X 8Mm Full Thread S.S.Screw ( 500 Nos. Pack ) 18 30Mm X 8Mm Full Thread S.S.Screw ( 500 Nos. Pack ) 19 25Mm X 6Mm Full Thread S.S.Screw ( 500 Nos. Pack ) 20 20Mm X 8Mm Full Thread S.S.Screw ( 500 Nos. Pack ) 21 20Mm X 6Mm Full Thread S.S.Screw ( 500 Nos. Pack ) 22 G.I Full Thread Nut, Bolts Washer 6Mm X 35Mm 23 G.I Full Thread Nut, Bolts Washer 8Mm X 35Mm 24 G.I Full Thread Nut, Bolts Washer 8Mm X 50Mm 25 G.I Full Thread Nut, Bolts Washer 10Mm X 35Mm 26 G.I Full Thread Nut, Bolts Washer 10Mm X 70Mm 27 G.I Full Thread Nut, Bolts Washer 13Mm X 100Mm 28 5 / 8 Dia 150Mm Long Full Thread Nuts & Bolts ( Ms ) 29 S.S.Nuts Bolts Half Double Washer M10 X 40Mm 30 S.S.Nuts Bolts Half Double Washer M12 X 40Mm 31 S.S.Nuts Bolts Half Double Washer M12 X 50Mm 32 S.S.Nuts Bolts Half Double Washer M6 X 30Mm 33 S.S.Nuts Bolts Half Double Washer M8 X 20Mm 34 S.S.Nuts Bolts Half Double Washer M8 X 30Mm 35 S.S.Nuts Bolts Half Double Washer M8 X 40Mm 36 S.S.Nuts Bolts Half Double Washer M8 X 50Mm 37 Copper Log Pin Type 2.5 Sqmm 38 Copper Log Pin Type 2.5 Sqmm ( Ring ) 39 Concrete Drill Bit 6Mm ( Jk Super Drive ) 40 Drill Bit Set Metal ( Jk Super Drive ) Niron Cutting, 4Mm, 6Mm, 8Mm, 10Mm, 12Mm Nwall Cutting – 6.5Mm, 8Mm, 10Mm. N 41 Aluminium Foil Tape Of Lengh 20 Mm And Width 48Mm 42 Tar Felt Roll  ( Pbs Roll )   ( Bitumen Felt Hessian Base ) Base Of Felts-Hessisan Base Type 3 ( Grade 1 -- Self Finished Felts For Water Proofing Under Type 3 Of Hessian Felts ) Materials-The Fabric Shall Conform To Type Ii Hessian Conforming To Is 2818 ( Part 2 ) :1971 Length Of Roll ( Cm ) -2000 And Width Of Roll ( Cm ) -100 43 Araldite 10Gm 44 Pidilite- M.Seal ( 500Gm )

INR 500 /-

Refer document

Refer document