Educational and Research Institute Boards / Undertakings / PSU Closing in 0 days TDR #27649200

Supply Of Arthroscopy And Other Implants

Issued by Boards / Undertakings / PSU · BANGALORE, Karnataka
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 May 2021
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
550
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
BANGALORE → Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply Of Arthroscopy And Other Implants 1. Fixed Loop, 2. Adjustable Loop, 3. Peek Screw, 4. Titanium Screw, 5. Bio Screw, 6. Fiber Tape, 7. Meniscal Repair Device, 8. Post Fixation Screw, 9. Suture Disk, 10. Staple, 11. Cancellous Screw, 12. Spiked Wahser, 13. Fibre Wire, 14. (A) 5 Mm Titanium Anchor (For Rotator Cuff Repair) (Ultra Bio Fiber Wire Material, Anchor Loaded With No.2 Fiber Wire, 2 Loaded And 3 Loaded, Self Tapping And Self Drill Anchor), 15. (B) 5 Mm Titaniaum Anchor (For Rotator Cuff Repair) (Ultra Bio Fiber Wire Material, 4 Needle, Anchor Loaded With No.2 Fiber Wire, 2 Loaded, Self Tapping And Self Drill Anchor), 16. Lateral Row Anchor ( Rotator Cuff Repair ) Peek Optima Material, Metal Tip With Self Tapping Anchor, Dia 5.5Mm, 17. 5.5 Mm Peek Anchor ( For Rotator Cuff Repair ), 18. Lateral Row Anchor ( Rotator Cuff Repair ) Peek Optima Material, Dia 5.5Mm, Use With 5.5Mm Punch, 19. 2.8Mm Titanium Anchor (For Bankart Repair) Ultra Bio Fiber Wire Material, Anchor Loaded With No. 2 Fiber Wire, 1 Loaded, Self Tapping And Self Drill Anchor, Titanium Tip Material, 20. 2.8Mm Titanium Anchor ( For Bankart Repair) Ultra Bio Fiber Wire Material, 2 Needle, Anchor Loaded With No.2 Fiber Wire, 1 Loaded, Self Tapping And Self Drill Anchor,Titanium Tip Material, 21. Peek Anchor (For Bankart Repair), 22. Knotless Anchor (For Bankart Repair), 23. Cannula -Trocar Sets, 24. Radial Head Prosthesis, 25. Laterjet Screw, 26. Hto Plates, 27. Adjustable Loop -Titanium Button For Femoral Fixation Of Dimension 12X4 Mm With Adjustable Loop With Sizes Ranging From 10-105Mm (Made Of Ultra High Molecular Weight Polyethylene) Used For Acl Reconstruction, 28. Fixed Loop - Titanium Button With 2 Accessory Sutures For Femoral Fixation With Loop Size (Polyster Polyethylene Terepthalate) For Acl Reconstruction Length 10, 15, 20, 25, 30 Mm), 29. Buttons - Fixation Device, Used In Conjunction With Any Adjustable And Fixed Loop Device,Should Allow 6 Mm To 10 Mm Area Of The Femoral Tunnel To Be Covered, 30. Plla Ha Screws For Tibial/Femoral Fixation In Acl, 31. Plga Beta Tcp Cs Screws For Tibial/Femoral Fixation In Acl, 32. Peek Interference Screws For Tibial/Femoral Fixation In Acl Construction, 33. Titanium Interference Screws For Tibial / Femoral Fixation In Acl Reconstruction, 34. Shoulder - Instability / Anchors - Titanium Anchor (3.0 Mm Titanium Screw In Anchors With High And Low Threads Design, Preloaded With Single/Double Ultra High Molecular Weight Polyethylene Braided Fiber For Bankart/Slap Repair, 35. Shoulder - Instability / Anchors - Peek Anchor (3.0 Mm Peek Tap In Anchors, Preloaded With Single/Double Ultra High Molecular Weight Polyethylene Braided Fiber For Bankart/Slap Repair), 36. Suture Anchor - 1.7 Mm And 1.9 Mm All Suture Tap In Anchor Made Up Of High Molecular Weight Polyethylene Braided Fibre And Preloaded With Single/Double Ultrahigh Molecular Weight Polyethylene Braided Sutures Which Opens Up To 3 Mm Post Deployment With Special Deployment Mechanism Through Unique Visual, Tactile And Auditory Cues Intended For Instability Repair, 37. Titanium Anchor With Needle - 3.0 Mm Titanium Screw In Anchors With High And Low Threads Design, Preloaded With Single/Double Ultrahigh Molecular Weight Polyethylene Braided Fiber For Rotator Cuff Repair, 38. Rotator Cuff Anchors - Titanium Anchor - 5.0Mm And 6.5 Mm Titanium Screw In Anchors With High And Low Threads Design, Preloaded With Double/Tripple Ultrahigh Molecular Weight Polyethylene Braided Fiber For Rotator Cuff Repair, 39. Peek Anchor - 4.5Mm,5.5Mm And 6.5Mm Peek Tap In Anchors, Preloaded At Distal End Of The Anchor With Double/ Tripple Ultrahigh Molecular Weight Polyethylene Braided Fiber For Rotator Cuff Repair, 40. Titanium Anchor With Needle - 5.0 Mm And 6.5 Mm Titanium Screw In Anchors With High And Low Threads Design, Preloaded With Single / Double Ultra High Molecular Weight Polyethylene Braided Fiber And Sharp Curved Needle End For Bankart/Slap Repair, 41. Bio Absorbable Screws For Acl, 42. Acl Adjustable Loop Button, 43. Acl Fixed Loop Button, 44. Acl Titanium Screw, 45. Meniscus All Inside Repair, 46. Shoulder Dislocation Anchors - Soft Anchors, 47. Shoulder Disloacation Anchor - Peek, 48. Shoulder Dislocation Anchors - Knotless, 49. Shoulder Dislocation Anchors - Metal, 50. Rotator Cuff Repair Anchors - Peek And Bio Anchors, 51. Rotator Cuff Repair Anchors - Metal, 52. Rotator Cuff Anchors - Knotless, 53. Femoral And Tibial Cortical Fixation Devices For Cruciate Ligament Reconstruction, 54. Graft Fixation Devices-Bio Absorbable, 55. Graft Fixation Devices -Titanium, 56. Graft Fixation Devices -Peek, 57. The Implants For Meniscus Repair Done Through An Arthroscopic Procedure, 58. The Implants For Meniscus Repair By An Inside Out Technique, 59. The Disposable Suture Shuttling Device For The Outside In Technique, 60. Attachable Button For Acl/Pcl Reconstruction, 61. Adjustable Button System For Tibial Fixation, 62. The All Suture Soft Anchor Used For Instability Repair, 63. The Knotless All Suture Soft Anchor Used For Glenoid Labrum Repair, 64. The Titanium Suture Anchor Used For Slap And Bankart Repair, 65. The Bioabsorbable Knotted Suture Anchors Used For Slap And Bankart Repair, 66. The Bioabsorbabale Knotless Suture Anchor Used For Arthroscopic Stability Procedures In The Glenohumeral Joint, 67. The Peek Knotless Suture Anchor Used For Arthroscopic Stability Procedures In The Glenohumeral Joint, 68. The Titanium Suture Anchor For Rotator Cuff Repair, 69. The Bioabsorbable Suture Anchor For Rc Repair, 70. The Biosbsorbable Knotless Suture Anchor For Cuff Repair, 71. Uhmwpe Suture And 2-0 Tape, 72. Uhmwpe Suture And 1.3 Mm Tape, 73. Suture Shuttling Instruments (The Disposable Instrument Used For Arthroscopic Suture Passing), 74. Meniscus Suture Shuttling Device (The Disposable Instrument For Arthroscopic Suturing Of The Meniscotibial Ligaments Of The Posterior Horn Of The Medial Meniscus Or Peripheral Posterior Medial Meniscus), 75. Underwater Ablation Probes For Arthroscopy Procedures (The Ablation Wands Used In Arthroscopic Procedures), 76. Twist-In Cannulas (The Arthroscopic Cannulas For Direct Visualisation Of Instruments And Suture Passing), 77. Flexible Silicone Button Cannula (The Cannulas Which Help Maximize Visibility And Manoeuvrability Inside And Outside Of The Arthroscopic Work Space, 78. A C Joint Reconstruction Using Adjustable Loop, Tapes And Buttons - The Implants / Kit For The Arthroscopic Anatomic Stabilization Of Acute Acromioclavicular Joint Dislocation), 79. The Implants/Kit For The Stabilization Of Acute Acromioclavicular Joint Dislocations, 80. Implants For Latarjet - (The Screws And Small Plate For Coracoid Fixation), 81. Drill Tip Guide Pin Cum Retrograde Reamers, 82. Stiffened Uhmwpe Suture, 83. Uhmwpe Continuous Loop With Needle, 84. Uhmwpe Loop With Tape W/Needle Graft Stitching For Acl Reconstruction Using Quadriceps Tendon, 85. Adjustable Loop / Button (Titanium Button For Femoral Fixation Of Dimension 12X4 Mm With Adjustable Loop With Sizes Ranging From 10-105Mm (Made Of Ultra High Molecular Weight Polyethylene) Used For Acl Reconstruction), 86. Fixed Loop (Titanium Button With 2 Accessory Sutures For Femoral Fixation With Loop Size (Polyster Polyethylene Terepthalate) For Acl Reconstruction), 87. Safety Button (Xentdo Button) 5.5 X 20Mm Titanium Button, 88. Bio Absorbable Screws (1St Gen) (Plla Plus Ha), 89. Bio Absorbable Screws (2Nd Gen) (Plla Ha Screws For Tibial/Femoral Fixation In Acl), 90. Bio Absorbable Screws (3Rd Gen) (Plga Beta Tcp Cs Screws For Tibial/Femoral Fixation In Acl), 91. Peek Screws (Peek Interference Screws For Tibial/Femoral Fixation In Acl Reconstruction), 92. All Inside Meniscus Repair (Meniscal Repair Implant For All Inside Technique), 93. Outside In Meniscus Repair (Meniscus Mendor), 94. Instability Anchors (Small Size Anchors) -Titanium Anchors, 95. Peek Anchors - 2.3Mm And 2.9Mm Peek Tap In Anchors, Preloaded With Single/Double Ultrahigh Molecular Weight Polyethylene Braided Fiber For Bankart/Slap Repair, 96. Bio Absorbable Anchor (Plla Plus Ha) -2.3Mm And 2.9 Mm Bioabsorbable (75 Percent Plla And 25 Percent Ha) Tap In Anchors, Preloaded With Single/Double Ultrahigh Molecular Weight Polyethylene Braided Fiber For Bankart/Slap Repair, 97. All Suture Anchors, 98. All Suture Anchors (Latest) (Q Shaped Bulb Anchor 1.8 Mm), 99. Knotless Anchors (Peek), 100. Rotator Cuff Anchors (Big Size Anchors) All Suture Anchor (Q Shaped Bulb Anchor 2.8 Mm), 101. Titanium Anchor (5.0Mm And 6.5 Mm Titanium Screw In Anchors With High And Low Threads Design, Preloaded With Double/Tripple Ultra High Molecular Weight Polyethylene Braided Fiber For Rotator Cuff Repair), 102. Peek Anchor, 103. Peek Anchor (Open Architect Anchor), 104. Bio Absorbable Anchor (Plla, Ha Anchor), 105. Bio Absorbable (3Rd Gen) (Open Architect Anchor With Biocomposite Plga, Btcp, Cs), 106. Knotless Anchors For Rotator Cuff Repair - Peek Knotless, 107. Peek Knotless (Latest) (Knotless Peek With Double Locking High Pitch Screw Anchor), 108. Suture Passer (Instability), 109. Suture Passer (Rotator Cuff) (Gun Shaped Suture Passer For Rotator Cuff), 110. All Suture Soft Anchor 1Mm Mini (Shoulder), 111. All Suture Soft Anchor 1.5Mm For Bankart Repair (Shoulder), 112. All Suture Soft Anchor 2.9Mm For Bankart And Rotator Cuff Repair (Shoulder), 113. Peek Suture Anchors 5.5Mm And 6.5Mm For Rotator Cuff Repair (Shoulder), 114. Peek Anchors With Tape 5.5Mm And 6.5Mm (Shoulder), 115. Knotless Anchors For Rotator Cuff Repair (Shoulder), 116. Knotless Anchors, 2.9Mm For Bankart Repair (Shoulder), 117. Peek Suture Anchors, 2.9Mm For Labral Repair (Shoulder), 118. Femoral Fixation Buttons For Acl/Pcl (Knee), 119. Tibial Fixation Screws For Acl/Pcl (Knee), 120. Meniscal Repair Implant (Knee), 121. Meniscal Repair Suture Cutter (Knee), 122. All Suture Anchors For Shoulder, 123. Bioscrew For Shoulder, 124. Peek Anchor For Shoulder, 125. Titanium Intraline Anchors (Shoulder), 126. Lateral Row Anchors For Rotator Cuff Repair (Shoulder), 127. Knotless Anchor For Bankart/Slap, 128. Peek Anchor For Bankart/Slap Repair, 129. All Suture Anchors With Tieable Tape, 130. Titanium Glenoid Anchor For Shoulder, 131. Peek Anchor For Rotator Cuff, 132. Adjustable Size Loop For Acl Fumoral Fixation (Knee), 133. Fixed Size Loop For Acl Fumoral Fixation (Knee), 134. Titanium Screw Acl Tibial Fixation (Knee), 135. Screws For Tibial Acl Fixation (Knee), 136. All Inside Meniscus Repair Devices (Knee), 137. Meniscus Repair Inside Out (Inside Out Meniscus Repair Handle), 138. Inside Out Meniscus Repair Cannulae, 139. Inside Out Needles For Meniscus Repair, 140. 5.5Mm X 75Mm Cannula For Shoulder Arthroscopy. Should Have Threads On Entire Body Of Cannula. Should Be Supplied As Sterile Pack., 141. 6.5Mm X 75Mm Cannula For Shoulder Arthroscopy. Should Have Threads On Entire Body Of Cannula. Should Be Supplied As Sterile Pack., 142. 8Mm X 75Mm Cannula For Shoulder Arthroscopy. Should Have Threads On Entire Body Of Cannula. Should Be Supplied As Sterile Pack., 143. 8Mm X 90Mm Cannula For Shoulder Arthroscopy. Should Have Threads On Entire Body Of Cannula. Should Be Supplied As Sterile Pack., 144. Disposable Nitinol Needle For Scorpion Or Equivalent Suture Passer For Cuff Repair. Instrument Should Be Provided On Case To Case Basis., 145. Suture Lasso 45 Degree Right For Instability Repair. Should Be Supplied With One Nitinol Shuttle Or Loop To Be Used With It., 146. Suture Lasso 45 Degree Left For Instability Repair. Should Be Supplied With One Nitinol Shuttle Or Loop To Be Used With It., 147. 4Mm-4.5Mm Shaver Blade To Be Used With Arthroscopic Shaver System. Blade Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 148. 5Mm/5.5Mm Barrel Shaped Fluted Shaver Burr To Be Used With Arthroscopic Shaver System. Blade Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 149. Disposable 90 Degree And 50 Degree Radio Frequency Bipolar Probes With Suction For Ablation During Arthroscopy. Probes Should Be Hand Controlled. Probes Should Be Compatible With Machine In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 150. 2Mm-2.5Mm Shaver Blade To Be Used With Arthroscopic Shaver System For Small Joint Arthroscopy. Blade Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 151. 2Mm-2.5Mm Shaver Burr To Be Used With Arthroscopic Shaver System For Small Joint Arthroscopy. Blade Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 152. Disposable Hook Shaped Radio Frequency Bipolar Probes With Suction For Ablation During Arthroscopy. Probes Should Be Hand Controlled. Probes Should Be Compatible With Machine In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 153. 4Mm Hood Shaped Fluted Shaver Burr To Be Used With Arthroscopic Shaver System. Blade Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 154. Integrated Pump Tubing (Inflow-Outflow Tubing) To Be Used Arthroscopy Pump For Pumping Saline During Arthroscopy Procedures. Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 155. Plate Thickness-1.5Mm, 156. 2 Hole With Gap (Thickness - 1.5 Mm) Plate, 157. 3 Hole With Gap (Thickness - 1.5 Mm) Plate, 158. 4 Hole Withh Gap (Thickness - 1.5 Mm) Plate, 159. 4 Hole Withut Gap (Thickness - 1.5 Mm) Plate, 160. 5 Hole With Gap (Thickness - 1.5 Mm) Plate, 161. 5 Hole Without Gap (Thickness - 1.5 Mm) Plate, 162. 6 Hole With Gap (Thickness - 1.5 Mm) Plate, 163. 6 Hole Without Gap (Thickness - 1.5 Mm) Plate, 164. Orbital Plate, 165. 4 Hole With Gap (Orbital Plate), 166. 4 Hole Without Gap (Orbital Plate), 167. 5 Hole Wth Gap (Orbital Plate), 168. 6 Hole With Gap (Orbital Plate), 169. 6 Hole Withou Gap (Orbital Plate), 170. L Plate Left And Right Side (Orbital Plate), 171. Y (Orbital Plate), 172. X (Orbital Plate), 173. Screws, 174. 1.5X4mm (Screws), 175. 1.5X6mm (Screws), 176. 1.5X8mm (Screws), 177. Thickness-2Mm Plate, 178. 2 Hole With Gap (Thickness - 2 Mm Plate), 179. 3 Hole With Gap (Thickness - 2 Mm Plate), 180. 4 Hole With Gap (Thickness - 2 Mm Plate), 181. 4 Hole Without Gap (Thickness - 2 Mm Plate), 182. 5 Hole With Gap (Thickness - 2 Mm Plate), 183. 5 Hole Without Gap (Thickness - 2 Mm Plate), 184. 6 Hole With Gap (Thickness - 2 Mm Plate), 185. 6 Hole Without Gap (Thickness - 2 Mm Plate), 186. Straight Plate 10 Hole (Thickness - 2 Mm Plate), 187. Straight Plate 20 Hole (Thickness - 2 Mm Plate), 188. L Plate Right And Left (Thickness - 2 Mm), 189. Y Plate (Thickness - 2 Mm), 190. X Plate (Thickness - 2 Mm), 191. Screws, 192. 2X4 Mm Screws, 193. 2X6 Mm Screws, 194. 2X8 Mm Screws, 195. Thickness - 2.5Mm Plate, 196. 2 Hole With Gap (Thickness - 2.5 Mm Plate), 197. 3 Hole With Gap (Thickness - 2.5 Mm Plate), 198. 4 Hole With Gap (Thickness - 2.5 Mm Plate), 199. 4 Hole Without Gap (Thickness - 2.5 Mm Plate), 200. 5 Hole With Gap (Thickness - 2.5 Mm Plate), 201. 5 Hole Without Gap (Thickness - 2.5 Mm Plate), 202. 6 Hole With Gap (Thickness - 2.5 Mm Plate), 203. 6 Hole Without Gap (Thickness - 2.5 Mm Plate), 204. Straight Reconstruction Plate, 205. Angle Reconstruction Plate, 206. Screws, 207. 2.5X4 Mm Screws, 208. 2.5X6 Mm Screws, 209. 2.5X8 Mm Screws, 210. Orbital Floor Mesh, 211. Titanium Mesh 6X6, 212. Titanium Mesh 4X4, 213. Drill Bit, 214. 1.1X6 Mm (Drill Bit), 215. 1.1X8 Mm (Drill Bit), 216. 1.3X6 Mm (Drill Bit), 217. 1.3X8 Mm (Drill Bit), 218. 1.5X6 Mm (Drill Bit), 219. 1.5X8 Mm (Drill Bit), 220. 1.7X6 Mm (Drill Bit), 221. 1.7X8 Mm (Drill Bit), 222. 2X6 Mm (Drill Bit), 223. 2X8 Mm (Drill Bit), 224. 26 Gauge Stainless Steel Wire, 225. Erics Arch Bar, 226. 2 Mm Lambda Plates, 227. Anatomical Thin Titanium Mesh Plates, 228. Micro Plates - 0.4Mm, 229. Orbital Rim Plate (Micro Plates - 0.4 Mm), 230. 20-Holes Adaption Plate (Micro Plates - 0.4 Mm), 231. Y Plate (Micro Plates - 0.4 Mm), 232. Double Y Plate (Micro Plates - 0.4 Mm), 233. Frame Plate (3D Plates) (Micro Plates - 0.4 Mm), 234. X Plate (Micro Plates - 0.4 Mm), 235. Titanium Strut Plate 18 Holes (Micro Plates - 0.4 Mm), 236. Orbital Mesh - 0.2 - 0.4Mm, 237. Mini Plates-0.5Mm, 238. Orbital Rim Plate (Mini Plates - 0.5 Mm), 239. 20-Holes Adaption Plate (Mini Plates - 0.5 Mm), 240. Y Plate (Mini Plates - 0.5 Mm), 241. Double Y Plate (Mini Plates - 0.5 Mm), 242. Frame Plate (3D Plates) (Mini Plates - 0.5 Mm), 243. X Plate (Mini Plates - 0.5 Mm), 244. Titanium Strut Plate 18 Holes (Mini Plates - 0.5 Mm), 245. L Plate All Types (Mini Plates - 0.5 Mm), 246. H Plate (Mini Plates - 0.5 Mm), 247. Medium Plates-0.7Mm, 248. Orbital Rim Plate (Medium Plates - 0.7 Mm), 249. 20-Holes Adaption Plate (Medium Plates - 0.7 Mm), 250. Y Plate (Medium Plates - 0.7 Mm), 251. Double Y Plate (Medium Plates - 0.7 Mm), 252. Frame Plate (3D Plates) (Medium Plates - 0.7 Mm), 253. X Plate (Medium Plates - 0.7 Mm), 254. Titanium Strut Plate 18 Holes (Medium Plates - 0.7 Mm), 255. L Plate All Types (Medium Plates - 0.7 Mm), 256. H Plate (Medium Plates - 0.7 Mm), 257. Large Plates-1Mm, 258. 20-Holes Adaption Plate (Large -1Mm), 259. Y Plate (Large -1Mm), 260. Double Y Plate (Large -1Mm), 261. X-Plate (Large -1Mm), 262. Titanium Strut Plate 18 Holes, 263. L Plate All Types, 264. H Plate, 265. Screws, 266. Screws From 4-12 Mm All Sizes, 267. Mandibular Reconstruction Plate Straight And Angled, 268. Cortical Screws (Size - 1.2, 1.3, 1.5, 2, 2.4 Mm Length - 6 Mm To 32 Mm), 269. Plates - Lcp / Straight Plates / T And Y Plates / Condylar Plates / H Plates -(Size - 1.2, 1.3, 1.5, 2, 2.4 Mm), 270. Headless Compression Screws / Herbert Screw (Size - 2.4Mm Length (9 To 44M), 271. Headless Compression Screws / Herbert Screw (Size -3Mm Length (9 To 44M), 272. Distal Ulna- Hook Plate (Lcp) (Size -2 Mm), 273. Distal Radius Volar Locking Plates- Variable Angle, Volar Lip Plate, Dorsal Plates, Radial Styloid Plate, Fragment Specific Plate (Size - 2.7Mm), 274. Suture Anchors-Single/Double Loaded With Needle, Fiber Wire No. 2 (Size -1.6, 2.3, 3.5Mm), 275. Limb Reconstruction System (Rail Fixation System) For Upper Limb (Size - 1.2Mm, 1.6Mm,2Mm, 2.2Mm With Respective Clamps And Distractors), 276. Vascular Clips (Small), 277. Vascular Clips (Medium), 278. Vascular Clips (Large), 279. Fogarty Catheter (Size 2Mm), 280. Fogarty Catheter (Size 3 Mm), 281. Fogarty Catheter (Size 4 Mm), 282. Fogarty Catheter (Size 5 Mm), 283. Cortical Screws (Size - 1.2, 1.3, 1.5, 2, 2.4 Mm Length - 6 Mm To 32 Mm), 284. Plates - Lcp / Straight Plates / T And Y Plates / Condylar Plates / H Plates -(Size - 1.2, 1.3, 1.5, 2, 2.4 Mm), 285. Headless Compression Screws (Size - 2.4 Mm Length (9 To 44M), 286. Headless Compression Screws (Size - 3Mm Length (9 To 44M), 287. Distal Ulna- Hook Plate (Lcp) (Size -2 Mm), 288. Distal Radius Volar Locking Plates - Variable Angle, Volar Lip Plate, Dorsal Plates, Radial Styloid Plate, Fragment Specific Plate (Size - 2.7Mm), 289. Suture Anchors-Single/Double Loaded With Needle, Suture No 2, And 3-0 (Size - 1.3,1.6, 2.3,3.5Mm), 290. Limb Reconstruction System (Rail Fixation System) For Upper Limb And Hand (Size - 1.2Mm, 1.6Mm,2Mm, 2.2Mm With Respective Clamps And Distractors), 291. Nerve Glue (Ready To Use Mix Without Preparation. 5Ml Preparation), 292. Radial Head Prosthesis (Modular) (18 To 29 Size Cobalt Chrome Head And Smooth Titanium Stem), 293. Arthroscopic Shaver And Burr (Compatible With Formula System) (Shaver 2.5Mmm, Burr 2Mm), 294. Arthroscope Radio Frequency Probe With Cable (Size - 2.3Mm), 295. Micro Forceps - 11Cm Long, Flat Handle, 9Mm Wide, Angulate 45 Degrees, 296. Vessel Dilators - 11Cm Long, Flat Handle, 9Mm Wide, Angulate 10 Degrees, 297. Needle Holder Curved - 15Cm Long, Round Handle, 8Mm Diameter (0.4Mm Tip), 298. Clamps (Single And Double - Vein Pattern) - (A) 6X36x16x3.0 Mm, 299. Clamps (Single And Double - Vein Pattern) - (B) 4X24x10x2.2 Mm, 300. Clamp Box 70 X 45Mm, 301. Diethrich Bull Dog Clamp (Straight) - 45Mm, 302. Diethrich Bull Dog Clamp (Curved) - 55Mm, 303. Lead Hand - Adult - With Malleable And Durable Lead, 304. Vessel Loops - Red (0.8 X 406Mm), 305. Vessel Loops - Blue (0.8 X 406Mm), 306. Vessel Loops - Yellow (0.8 X 406Mm), 307. Uncemented Thr (Indian) (Full Component Femoral Plus Tibial Plus Insert), 308. Uncemented Long Stem Bipolar Hemiarthroplasty (Indian) (Long Stem Uncemented Plus Modular Bipolar Head), 309. Extension Rods / Stem For Complex Primary Tkr (Indian) (Femoral Component Plus Tibial Component Plus Insert Plus Tibial Extension Rod), 310. Extension Rods / Stem For Complex Primary Tkr (Imported) (Femoral Component Plus Tibial Component Plus Insert Plus Tibial Extension Rod), 311. Uncemented Modular Bipolar Hemiarthroplasty (Indian) (Ha Coated Stem Plus Modular Bipolar Head, 312. Hfn Nail (Hip Fracture Nail),

BOQ

Sl No Item Code Item Name Item Description Unit Quantity
1
Arthroscoppy-01 FIXED LOOP Specification: As per tender document
Nos
1
2
Arthroscoppy-02 ADJUSTABLE LOOP Specification: As per tender document
Nos
1
3
Arthroscoppy-03 PEEK SCREW Specification: As per tender document
Nos
1
4
Arthroscoppy-04 TITANIUM SCREW Specification: As per tender document
Nos
1
5
Arthroscoppy-05 BIO SCREW Specification: As per tender document
Nos
1
6
Arthroscoppy-06 FIBER TAPE Specification: As per tender document
Nos
1
7
Arthroscoppy-07 MENISCAL REPAIR DEVICE Specification: As per tender document
Nos
1
8
Arthroscoppy-08 POST FIXATION SCREW Specification: As per tender document
Nos
1
9
Arthroscoppy-09 SUTURE DISK Specification: As per tender document
Nos
1
10
Arthroscoppy-10 STAPLE Specification: As per tender document
Nos
1
11
Arthroscoppy-11 CANCELLOUS SCREW Specification: As per tender document
Nos
1
12
Arthroscoppy-12 SPIKED WAHSER Specification: As per tender document
Nos
1
13
Arthroscoppy-13 FIBRE WIRE Specification: As per tender document
Nos
1
14
Arthroscoppy-14 (A) 5 MM TITANIUM ANCHOR (For Rotator Cuff Repair) (Ultra Bio Fiber wire Material, Anchor Loaded with No.2 Fiber wire, 2 loaded and 3 loaded, Self tapping and self drill Anchor) Specification: As per tender document
Nos
1
15
Arthroscoppy-15 (B) 5 MM Titaniaum Anchor (For Rotator Cuff Repair) (Ultra Bio Fiber wire Material, 4 Needle, Anchor Loaded with No.2 Fiber wire, 2 loaded, Self tapping and self drill Anchor) Specification: As per tender document
Nos
1
16
Arthroscoppy-16 LATERAL ROW ANCHOR ( ROTATOR CUFF REPAIR ) Peek Optima Material, Metal Tip with Self Tapping Anchor, Dia 5.5mm Specification: As per tender document
Nos
1
17
Arthroscoppy-17 5.5 MM PEEK Anchor ( For Rotator Cuff Repair ) Specification: As per tender document
Nos
1
18
Arthroscoppy-18 LATERAL ROW ANCHOR ( ROTATOR CUFF REPAIR ) Peek Optima Material, Dia 5.5mm, Use with 5.5mm Punch Specification: As per tender document
Nos
1
19
Arthroscoppy-19 2.8MM TITANIUM ANCHOR (For Bankart Repair) Ultra Bio Fiber wire Material, Anchor Loaded with No. 2 Fiber wire, 1 Loaded, Self tapping and self drill Anchor, Titanium Tip Material Specification: As per tender document
Nos
1
20
Arthroscoppy-20 2.8MM TITANIUM ANCHOR ( For Bankart Repair) Ultra Bio Fiber wire Material, 2 Needle, Anchor Loaded with No.2 Fiber wire, 1 loaded, Self tapping and self drill Anchor,Titanium Tip Material Specification: As per tender document
Nos
1
21
Arthroscoppy-21 PEEK ANCHOR (For Bankart Repair) Specification: As per tender document
Nos
1
22
Arthroscoppy-22 KNOTLESS ANCHOR (For Bankart Repair) Specification: As per tender document
Nos
1
23
Arthroscoppy-23 CANNULA -TROCAR SETS Specification: As per tender document
Nos
1
24
Arthroscoppy-24 RADIAL HEAD PROSTHESIS Specification: As per tender document
Nos
1
25
Arthroscoppy-25 LATERJET SCREW Specification: As per tender document
Nos
1
26
Arthroscoppy-26 HTO plates Specification: As per tender document
Nos
1
27
Arthroscoppy-27 ADJUSTABLE LOOP -Titanium button for femoral fixation of dimension 12x4 mm with adjustable loop with sizes ranging from 10-105mm (made of ultra high molecular weight polyethylene) used for ACL reconstruction Specification: As per tender document
Nos
1
28
Arthroscoppy-28 FIXED LOOP - Titanium Button with 2 accessory sutures for femoral fixation with loop size (Polyster Polyethylene Terepthalate) for ACL reconstruction LENGTH 10, 15, 20, 25, 30 MM) Specification: As per tender document
Nos
1
29
Arthroscoppy-29 BUTTONS - Fixation Device, used in conjunction with any adjustable and fixed loop device,should allow 6 mm to 10 mm area of the femoral tunnel to be covered Specification: As per tender document
Nos
1
30
Arthroscoppy-30 PLLA HA Screws for Tibial/Femoral fixation in ACL Specification: As per tender document
Nos
1
31
Arthroscoppy-31 PLGA Beta TCP CS Screws for Tibial/Femoral fixation in ACL Specification: As per tender document
Nos
1
32
Arthroscoppy-32 Peek Interference screws for Tibial/femoral fixation in ACL construction Specification: As per tender document
Nos
1
33
Arthroscoppy-33 TITANIUM Interference screws for Tibial / femoral fixation in ACL reconstruction Specification: As per tender document
Nos
1
34
Arthroscoppy-34 SHOULDER - Instability / Anchors - TITANIUM ANCHOR (3.0 mm titanium screw in anchors with high and low threads design, preloaded with single/double ultra high molecular weight Polyethylene braided fiber for bankart/slap repair Specification: As per tender document
Nos
1
35
Arthroscoppy-35 SHOULDER - Instability / Anchors - Peek Anchor (3.0 mm Peek Tap in anchors, preloaded with single/double ultra high molecular weight Polyethylene braided fiber for bankart/slap repair) Specification: As per tender document
Nos
1
36
Arthroscoppy-36 SUTURE ANCHOR - 1.7 mm and 1.9 mm All Suture tap in anchor made up of high molecular weight polyethylene braided fibre and preloaded with single/double ultrahigh molecular weight polyethylene braided sutures which opens up to 3 mm post deployment with special deployment mechanism through unique visual, tactile and auditory cues intended for instability repair Specification: As per tender document
Nos
1
37
Arthroscoppy-37 TITANIUM ANCHOR WITH NEEDLE - 3.0 mm titanium screw in anchors with high and low threads design, preloaded with single/double ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair Specification: As per tender document
Nos
1
38
Arthroscoppy-38 ROTATOR CUFF ANCHORS - Titanium Anchor - 5.0mm and 6.5 mm titanium screw in anchors with high and low threads design, preloaded with double/tripple ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair Specification: As per tender document
Nos
1
39
Arthroscoppy-39 PEEK ANCHOR - 4.5mm,5.5mm and 6.5mm Peek Tap in anchors, preloaded at distal end of the anchor with double/ tripple ultrahigh molecular weight Polyethylene braided fiber for rotator cuff repair Specification: As per tender document
Nos
1
40
Arthroscoppy-40 TITANIUM ANCHOR WITH NEEDLE - 5.0 mm and 6.5 mm titanium screw in anchors with high and low threads design, preloaded with single / double ultra high molecular weight Polyethylene braided fiber and sharp curved needle end for bankart/slap repair Specification: As per tender document
Nos
1
41
Arthroscoppy-41 BIO ABSORBABLE SCREWS FOR ACL Specification: As per tender document
Nos
1
42
Arthroscoppy-42 ACL ADJUSTABLE LOOP BUTTON Specification: As per tender document
Nos
1
43
Arthroscoppy-43 ACL FIXED LOOP BUTTON Specification: As per tender document
Nos
1
44
Arthroscoppy-44 ACL TITANIUM SCREW Specification: As per tender document
Nos
1
45
Arthroscoppy-45 MENISCUS ALL INSIDE REPAIR Specification: As per tender document
Nos
1
46
Arthroscoppy-46 SHOULDER DISLOCATION ANCHORS - SOFT ANCHORS Specification: As per tender document
Nos
1
47
Arthroscoppy-47 SHOULDER DISLOACATION ANCHOR - PEEK Specification: As per tender document
Nos
1
48
Arthroscoppy-48 SHOULDER DISLOCATION ANCHORS - KNOTLESS Specification: As per tender document
Nos
1
49
Arthroscoppy-49 SHOULDER DISLOCATION ANCHORS - METAL Specification: As per tender document
Nos
1
50
Arthroscoppy-50 ROTATOR CUFF REPAIR ANCHORS - PEEK AND BIO ANCHORS Specification: As per tender document
Nos
1
51
Arthroscoppy-51 ROTATOR CUFF REPAIR ANCHORS - METAL Specification: As per tender document
Nos
1
52
Arthroscoppy-52 ROTATOR CUFF ANCHORS - KNOTLESS Specification: As per tender document
Nos
1
53
Arthroscoppy-53 Femoral and Tibial CORTICAL FIXATION DEVICES for Cruciate Ligament reconstruction Specification: As per tender document
Nos
1
54
Arthroscoppy-54 Graft fixation devices-Bio Absorbable Specification: As per tender document
Nos
1
55
Arthroscoppy-55 Graft fixation devices -Titanium Specification: As per tender document
Nos
1
56
Arthroscoppy-56 Graft fixation devices -PEEK Specification: As per tender document
Nos
1
57
Arthroscoppy-57 The implants for meniscus repair done through an arthroscopic procedure Specification: As per tender document
Nos
1
58
Arthroscoppy-58 The implants for meniscus repair by an inside out technique Specification: As per tender document
Nos
1
59
Arthroscoppy-59 The disposable suture shuttling device for the outside in technique Specification: As per tender document
Nos
1
60
Arthroscoppy-60 Attachable Button for ACL/PCL Reconstruction Specification: As per tender document
Nos
1
61
Arthroscoppy-61 Adjustable Button system for Tibial fixation Specification: As per tender document
Nos
1
62
Arthroscoppy-62 The All suture soft anchor used for Instability Repair Specification: As per tender document
Nos
1
63
Arthroscoppy-63 The Knotless All suture soft anchor used for Glenoid Labrum Repair Specification: As per tender document
Nos
1
64
Arthroscoppy-64 The titanium suture anchor used for SLAP and Bankart Repair Specification: As per tender document
Nos
1
65
Arthroscoppy-65 The Bioabsorbable knotted suture anchors used for SLAP and Bankart repair Specification: As per tender document
Nos
1
66
Arthroscoppy-66 The Bioabsorbabale knotless suture anchor used for arthroscopic stability procedures in the glenohumeral joint Specification: As per tender document
Nos
1
67
Arthroscoppy-67 The PEEK knotless suture anchor used for arthroscopic stability procedures in the glenohumeral joint Specification: As per tender document
Nos
1
68
Arthroscoppy-68 The titanium suture anchor for Rotator cuff repair Specification: As per tender document
Nos
1
69
Arthroscoppy-69 The Bioabsorbable suture anchor for RC repair Specification: As per tender document
Nos
1
70
Arthroscoppy-70 The Biosbsorbable Knotless suture anchor for cuff repair Specification: As per tender document
Nos
1
71
Arthroscoppy-71 UHMWPE Suture and 2-0 tape Specification: As per tender document
Nos
1
72
Arthroscoppy-72 UHMWPE Suture and 1.3 mm tape Specification: As per tender document
Nos
1
73
Arthroscoppy-73 Suture Shuttling Instruments (The disposable instrument used for arthroscopic suture passing) Specification: As per tender document
Nos
1
74
Arthroscoppy-74 Meniscus Suture Shuttling Device (The disposable instrument for arthroscopic suturing of the meniscotibial ligaments of the posterior horn of the medial meniscus or peripheral posterior medial meniscus) Specification: As per tender document
Nos
1
75
Arthroscoppy-75 Underwater Ablation Probes for Arthroscopy Procedures (The ablation wands used in arthroscopic procedures) Specification: As per tender document
Nos
1
76
Arthroscoppy-76 Twist-In Cannulas (The arthroscopic cannulas for direct visualisation of instruments and suture passing) Specification: As per tender document
Nos
1
77
Arthroscoppy-77 Flexible Silicone Button Cannula (The cannulas which help maximize visibility and manoeuvrability inside and outside of the arthroscopic work space Specification: As per tender document
Nos
1
78
Arthroscoppy-78 A C Joint Reconstruction using Adjustable Loop, Tapes and Buttons - The implants / kit for the arthroscopic anatomic stabilization of acute acromioclavicular joint dislocation) Specification: As per tender document
Nos
1
79
Arthroscoppy-79 The implants/kit for the stabilization of acute acromioclavicular joint dislocations Specification: As per tender document
Nos
1
80
Arthroscoppy-80 Implants for Latarjet - (The screws and small plate for coracoid fixation) Specification: As per tender document
Nos
1
81
Arthroscoppy-81 Drill tip Guide pin cum Retrograde Reamers Specification: As per tender document
Nos
1
82
Arthroscoppy-82 Stiffened UHMWPE Suture Specification: As per tender document
Nos
1
83
Arthroscoppy-83 UHMWPE Continuous Loop with Needle Specification: As per tender document
Nos
1
84
Arthroscoppy-84 UHMWPE Loop with Tape w/Needle Graft Stitching for ACL Reconstruction using Quadriceps Tendon Specification: As per tender document
Nos
1
85
Arthroscoppy-85 ADJUSTABLE LOOP / BUTTON (Titanium button for femoral fixation of dimension 12x4 mm with adjustable loop with sizes ranging from 10-105mm (made of ultra high molecular weight polyethylene) used for ACL reconstruction) Specification: As per tender document
Nos
1
86
Arthroscoppy-86 FIXED LOOP (Titanium Button with 2 accessory sutures for femoral fixation with loop size (Polyster Polyethylene Terepthalate) for ACL reconstruction) Specification: As per tender document
Nos
1
87
Arthroscoppy-87 SAFETY BUTTON (xentdo button) 5.5 x 20mm titanium button Specification: As per tender document
Nos
1
88
Arthroscoppy-88 Bio Absorbable Screws (1st Gen) (PLLA plus Ha) Specification: As per tender document
Nos
1
89
Arthroscoppy-89 Bio Absorbable Screws (2nd Gen) (PLLA HA Screws for Tibial/Femoral fixation in ACL) Specification: As per tender document
Nos
1
90
Arthroscoppy-90 Bio Absorbable Screws (3rd Gen) (PLGA Beta TCP CS Screws for Tibial/Femoral fixation in ACL) Specification: As per tender document
Nos
1
91
Arthroscoppy-91 Peek Screws (Peek Interference screws for Tibial/femoral fixation in ACL reconstruction) Specification: As per tender document
Nos
1
92
Arthroscoppy-92 All inside Meniscus Repair (Meniscal Repair Implant for ALL Inside Technique) Specification: As per tender document
Nos
1
93
Arthroscoppy-93 Outside in Meniscus Repair (Meniscus Mendor) Specification: As per tender document
Nos
1
94
Arthroscoppy-94 Instability Anchors (Small Size Anchors) -Titanium Anchors Specification: As per tender document
Nos
1
95
Arthroscoppy-95 Peek Anchors - 2.3mm and 2.9mm Peek Tap in anchors, preloaded with single/double ultrahigh molecular weight Polyethylene braided fiber for bankart/slap repair Specification: As per tender document
Nos
1
96
Arthroscoppy-96 Bio Absorbable Anchor (PLLA plus HA) -2.3mm and 2.9 mm Bioabsorbable (75 percent PLLA and 25 percent HA) Tap in anchors, preloaded with single/double ultrahigh molecular weight Polyethylene braided fiber for bankart/slap repair Specification: As per tender document
Nos
1
97
Arthroscoppy-97 All Suture Anchors Specification: As per tender document
Nos
1
98
Arthroscoppy-98 All Suture Anchors (Latest) (Q shaped bulb Anchor 1.8 mm) Specification: As per tender document
Nos
1
99
Arthroscoppy-99 Knotless Anchors (Peek) Specification: As per tender document
Nos
1
100
Arthroscoppy-100 Rotator Cuff Anchors (Big size Anchors) All Suture Anchor (Q shaped bulb Anchor 2.8 mm) Specification: As per tender document
Nos
1
101
Arthroscoppy-101 Titanium Anchor (5.0mm and 6.5 mm titanium screw in anchors with high and low threads design, preloaded with double/tripple ultra high molecular weight Polyethylene braided fiber for rotator cuff repair) Specification: As per tender document
Nos
1
102
Arthroscoppy-102 Peek Anchor Specification: As per tender document
Nos
1
103
Arthroscoppy-103 Peek Anchor (Open Architect Anchor) Specification: As per tender document
Nos
1
104
Arthroscoppy-104 Bio Absorbable Anchor (PLLA, HA Anchor) Specification: As per tender document
Nos
1
105
Arthroscoppy-105 Bio Absorbable (3rd Gen) (Open Architect Anchor with Biocomposite PLGA, BTCP, CS) Specification: As per tender document
Nos
1
106
Arthroscoppy-106 Knotless Anchors for Rotator cuff repair - Peek Knotless Specification: As per tender document
Nos
1
107
Arthroscoppy-107 Peek Knotless (latest) (Knotless Peek with double locking High pitch screw Anchor) Specification: As per tender document
Nos
1
108
Arthroscoppy-108 Suture Passer (INSTABILITY) Specification: As per tender document
Nos
1
109
Arthroscoppy-109 Suture Passer (ROTATOR CUFF) (Gun shaped suture passer for Rotator cuff) Specification: As per tender document
Nos
1
110
Arthroscoppy-110 All Suture Soft Anchor 1MM Mini (Shoulder) Specification: As per tender document
Nos
1
111
Arthroscoppy-111 All Suture Soft Anchor 1.5mm for Bankart Repair (Shoulder) Specification: As per tender document
Nos
1
112
Arthroscoppy-112 All Suture Soft Anchor 2.9mm For Bankart and Rotator Cuff Repair (Shoulder) Specification: As per tender document
Nos
1
113
Arthroscoppy-113 Peek Suture Anchors 5.5MM and 6.5MM For Rotator Cuff Repair (Shoulder) Specification: As per tender document
Nos
1
114
Arthroscoppy-114 Peek Anchors with Tape 5.5MM and 6.5MM (Shoulder) Specification: As per tender document
Nos
1
115
Arthroscoppy-115 Knotless Anchors For Rotator Cuff Repair (Shoulder) Specification: As per tender document
Nos
1
116
Arthroscoppy-116 Knotless Anchors, 2.9mm For Bankart Repair (Shoulder) Specification: As per tender document
Nos
1
117
Arthroscoppy-117 Peek Suture Anchors, 2.9MM For Labral Repair (Shoulder) Specification: As per tender document
Nos
1
118
Arthroscoppy-118 Femoral Fixation Buttons for ACL/PCL (Knee) Specification: As per tender document
Nos
1
119
Arthroscoppy-119 Tibial Fixation Screws for ACL/PCL (Knee) Specification: As per tender document
Nos
1
120
Arthroscoppy-120 Meniscal Repair Implant (Knee) Specification: As per tender document
Nos
1
121
Arthroscoppy-121 Meniscal Repair Suture Cutter (Knee) Specification: As per tender document
Nos
1
122
Arthroscoppy-122 ALL SUTURE ANCHORS FOR SHOULDER Specification: As per tender document
Nos
1
123
Arthroscoppy-123 BIOSCREW FOR SHOULDER Specification: As per tender document
Nos
1
124
Arthroscoppy-124 PEEK ANCHOR FOR SHOULDER Specification: As per tender document
Nos
1
125
Arthroscoppy-125 TITANIUM INTRALINE ANCHORS (SHOULDER) Specification: As per tender document
Nos
1
126
Arthroscoppy-126 LATERAL ROW ANCHORS FOR ROTATOR CUFF REPAIR (SHOULDER) Specification: As per tender document
Nos
1
127
Arthroscoppy-127 KNOTLESS ANCHOR FOR BANKART/SLAP Specification: As per tender document
Nos
1
128
Arthroscoppy-128 PEEK ANCHOR FOR BANKART/SLAP REPAIR Specification: As per tender document
Nos
1
129
Arthroscoppy-129 ALL SUTURE ANCHORS WITH TIEABLE TAPE Specification: As per tender document
Nos
1
130
Arthroscoppy-130 TITANIUM GLENOID ANCHOR FOR SHOULDER Specification: As per tender document
Nos
1
131
Arthroscoppy-131 PEEK ANCHOR FOR ROTATOR CUFF Specification: As per tender document
Nos
1
132
Arthroscoppy-132 ADJUSTABLE SIZE LOOP FOR ACL FUMORAL FIXATION (KNEE) Specification: As per tender document
Nos
1
133
Arthroscoppy-133 FIXED SIZE LOOP FOR ACL FUMORAL FIXATION (KNEE) Specification: As per tender document
Nos
1
134
Arthroscoppy-134 TITANIUM SCREW ACL TIBIAL FIXATION (KNEE) Specification: As per tender document
Nos
1
135
Arthroscoppy-135 SCREWS FOR TIBIAL ACL FIXATION (KNEE) Specification: As per tender document
Nos
1
136
Arthroscoppy-136 ALL INSIDE MENISCUS REPAIR DEVICES (KNEE) Specification: As per tender document
Nos
1
137
Arthroscoppy-137 MENISCUS REPAIR INSIDE OUT (INSIDE OUT MENISCUS REPAIR HANDLE) Specification: As per tender document
Nos
1
138
Arthroscoppy-138 INSIDE OUT MENISCUS REPAIR CANNULAE Specification: As per tender document
Nos
1
139
Arthroscoppy-139 INSIDE OUT NEEDLES FOR MENISCUS REPAIR Specification: As per tender document
Nos
1
140
Arthroscoppy-140 5.5mm x 75mm cannula for shoulder arthroscopy. Should have threads on entire body of cannula. Should be supplied as sterile pack. Specification: As per tender document
Nos
1
141
Arthroscoppy-141 6.5mm x 75mm cannula for shoulder arthroscopy. Should have threads on entire body of cannula. Should be supplied as sterile pack. Specification: As per tender document
Nos
1
142
Arthroscoppy-142 8mm x 75mm cannula for shoulder arthroscopy. Should have threads on entire body of cannula. Should be supplied as sterile pack. Specification: As per tender document
Nos
1
143
Arthroscoppy-143 8mm x 90mm cannula for shoulder arthroscopy. Should have threads on entire body of cannula. Should be supplied as sterile pack. Specification: As per tender document
Nos
1
144
Arthroscoppy-144 Disposable nitinol needle for scorpion or equivalent suture passer for cuff repair. Instrument should be provided on case to case basis. Specification: As per tender document
Nos
1
145
Arthroscoppy-145 Suture lasso 45 degree right for instability repair. Should be supplied with one nitinol shuttle or loop to be used with it. Specification: As per tender document
Nos
1
146
Arthroscoppy-146 Suture lasso 45 degree left for instability repair. Should be supplied with one nitinol shuttle or loop to be used with it. Specification: As per tender document
Nos
1
147
Arthroscoppy-147 4mm-4.5mm shaver blade to be used with arthroscopic shaver system. Blade should be compatible with shaver system in Ot or supplier has to provide machine on case to case basis. Specification: As per tender document
Nos
1
148
Arthroscoppy-148 5mm/5.5mm barrel shaped fluted shaver burr to be used with arthroscopic shaver system. Blade should be compatible with shaver system in OT or supplier has to provide machine on case to case basis. Specification: As per tender document
Nos
1
149
Arthroscoppy-149 Disposable 90 degree and 50 degree radio frequency bipolar probes with suction for ablation during arthroscopy. Probes should be hand controlled. Probes should be compatible with machine in OT or supplier has to provide machine on case to case basis. Specification: As per tender document
Nos
1
150
Arthroscoppy-150 2mm-2.5mm shaver blade to be used with arthroscopic shaver system for small joint arthroscopy. Blade should be compatible with shaver system in Ot or supplier has to provide machine on case to case basis. Specification: As per tender document
Nos
1
151
Arthroscoppy-151 2mm-2.5mm shaver burr to be used with arthroscopic shaver system for small joint arthroscopy. Blade should be compatible with shaver system in Ot or supplier has to provide machine on case to case basis. Specification: As per tender document
Nos
1
152
Arthroscoppy-152 Disposable hook shaped radio frequency bipolar probes with suction for ablation during arthroscopy. Probes should be hand controlled. Probes should be compatible with machine in OT or supplier has to provide machine on case to case basis. Specification: As per tender document
Nos
1
153
Arthroscoppy-153 4mm hood shaped fluted shaver burr to be used with arthroscopic shaver system. Blade should be compatible with shaver system in Ot or supplier has to provide machine on case to case basis. Specification: As per tender document
Nos
1
154
Arthroscoppy-154 Integrated pump tubing (inflow-outflow tubing) to be used arthroscopy pump for pumping saline during arthroscopy procedures. should be compatible with shaver system in Ot or supplier has to provide machine on case to case basis. Specification: As per tender document
Nos
1
155
INDFMS-01 PLATE THICKNESS-1.5mm Specification: As per tender document
Nos
1
156
INDFMS-02 2 hole with gap (Thickness - 1.5 MM) Plate Specification: As per tender document
Nos
1
157
INDFMS-03 3 hole with gap (Thickness - 1.5 MM) Plate Specification: As per tender document
Nos
1
158
INDFMS-04 4 hole withh gap (Thickness - 1.5 MM) Plate Specification: As per tender document
Nos
1
159
INDFMS-05 4 hole withut gap (Thickness - 1.5 MM) Plate Specification: As per tender document
Nos
1
160
INDFMS-06 5 hole with gap (Thickness - 1.5 MM) Plate Specification: As per tender document
Nos
1
161
INDFMS-07 5 hole without gap (Thickness - 1.5 MM) Plate Specification: As per tender document
Nos
1
162
INDFMS-08 6 hole with gap (Thickness - 1.5 MM) Plate Specification: As per tender document
Nos
1
163
INDFMS-09 6 hole without gap (Thickness - 1.5 MM) Plate Specification: As per tender document
Nos
1
164
INDFMS-10 ORBITAL PLATE Specification: As per tender document
Nos
1
165
INDFMS-11 4 hole with gap (Orbital plate) Specification: As per tender document
Nos
1
166
INDFMS-12 4 hole without gap (Orbital plate) Specification: As per tender document
Nos
1
167
INDFMS-13 5 hole wth gap (Orbital plate) Specification: As per tender document
Nos
1
168
INDFMS-14 6 hole with gap (Orbital plate) Specification: As per tender document
Nos
1
169
INDFMS-15 6 hole withou gap (Orbital plate) Specification: As per tender document
Nos
1
170
INDFMS-16 L plate left and right side (Orbital plate) Specification: As per tender document
Nos
1
171
INDFMS-17 Y (Orbital plate) Specification: As per tender document
Nos
1
172
INDFMS-18 X (Orbital plate) Specification: As per tender document
Nos
1
173
INDFMS-19 SCREWS Specification: As per tender document
Nos
1
174
INDFMS-20 1.5x4mm (Screws) Specification: As per tender document
Nos
1
175
INDFMS-21 1.5x6mm (Screws) Specification: As per tender document
Nos
1
176
INDFMS-22 1.5x8mm (Screws) Specification: As per tender document
Nos
1
177
INDFMS-23 THICKNESS-2MM PLATE Specification: As per tender document
Nos
1
178
INDFMS-24 2 hole with gap (Thickness - 2 MM plate) Specification: As per tender document
Nos
1
179
INDFMS-25 3 hole with gap (Thickness - 2 MM plate) Specification: As per tender document
Nos
1
180
INDFMS-26 4 hole with gap (Thickness - 2 MM plate) Specification: As per tender document
Nos
1
181
INDFMS-27 4 hole without gap (Thickness - 2 MM plate) Specification: As per tender document
Nos
1
182
INDFMS-28 5 hole with gap (Thickness - 2 MM plate) Specification: As per tender document
Nos
1
183
INDFMS-29 5 hole without gap (Thickness - 2 MM plate) Specification: As per tender document
Nos
1
184
INDFMS-30 6 hole with gap (Thickness - 2 MM plate) Specification: As per tender document
Nos
1
185
INDFMS-31 6 hole without gap (Thickness - 2 MM plate) Specification: As per tender document
Nos
1
186
INDFMS-32 Straight plate 10 hole (Thickness - 2 MM plate) Specification: As per tender document
Nos
1
187
INDFMS-33 Straight plate 20 hole (Thickness - 2 MM plate) Specification: As per tender document
Nos
1
188
INDFMS-34 L plate right and left (Thickness - 2 MM) Specification: As per tender document
Nos
1
189
INDFMS-35 Y plate (Thickness - 2 MM) Specification: As per tender document
Nos
1
190
INDFMS-36 X plate (Thickness - 2 MM) Specification: As per tender document
Nos
1
191
INDFMS-37 SCREWS Specification: As per tender document
Nos
1
192
INDFMS-38 2x4 mm screws Specification: As per tender document
Nos
1
193
INDFMS-39 2x6 mm screws Specification: As per tender document
Nos
1
194
INDFMS-40 2x8 mm screws Specification: As per tender document
Nos
1
195
INDFMS-41 THICKNESS - 2.5MM PLATE Specification: As per tender document
Nos
1
196
INDFMS-42 2 hole with gap (Thickness - 2.5 MM plate) Specification: As per tender document
Nos
1
197
INDFMS-43 3 hole with gap (Thickness - 2.5 MM plate) Specification: As per tender document
Nos
1
198
INDFMS-44 4 hole with gap (Thickness - 2.5 MM plate) Specification: As per tender document
Nos
1
199
INDFMS-45 4 hole without gap (Thickness - 2.5 MM plate) Specification: As per tender document
Nos
1
200
INDFMS-46 5 hole with gap (Thickness - 2.5 MM plate) Specification: As per tender document
Nos
1
201
INDFMS-47 5 hole without gap (Thickness - 2.5 MM plate) Specification: As per tender document
Nos
1
202
INDFMS-48 6 hole with gap (Thickness - 2.5 MM plate) Specification: As per tender document
Nos
1
203
INDFMS-49 6 hole without gap (Thickness - 2.5 MM plate) Specification: As per tender document
Nos
1
204
INDFMS-50 Straight reconstruction plate Specification: As per tender document
Nos
1
205
INDFMS-51 Angle reconstruction plate Specification: As per tender document
Nos
1
206
INDFMS-52 SCREWS Specification: As per tender document
Nos
1
207
INDFMS-53 2.5x4 mm screws Specification: As per tender document
Nos
1
208
INDFMS-54 2.5x6 mm screws Specification: As per tender document
Nos
1
209
INDFMS-55 2.5x8 mm screws Specification: As per tender document
Nos
1
210
INDFMS-56 Orbital floor mesh Specification: As per tender document
Nos
1
211
INDFMS-57 Titanium mesh 6x6 Specification: As per tender document
Nos
1
212
INDFMS-58 Titanium mesh 4x4 Specification: As per tender document
Nos
1
213
INDFMS-59 DRILL BIT Specification: As per tender document
Nos
1
214
INDFMS-60 1.1x6 mm (Drill Bit) Specification: As per tender document
Nos
1
215
INDFMS-61 1.1x8 mm (Drill Bit) Specification: As per tender document
Nos
1
216
INDFMS-62 1.3x6 mm (Drill Bit) Specification: As per tender document
Nos
1
217
INDFMS-63 1.3x8 mm (Drill Bit) Specification: As per tender document
Nos
1
218
INDFMS-64 1.5x6 mm (Drill Bit) Specification: As per tender document
Nos
1
219
INDFMS-65 1.5x8 mm (Drill Bit) Specification: As per tender document
Nos
1
220
INDFMS-66 1.7x6 mm (Drill Bit) Specification: As per tender document
Nos
1
221
INDFMS-67 1.7x8 mm (Drill Bit) Specification: As per tender document
Nos
1
222
INDFMS-68 2x6 mm (Drill Bit) Specification: As per tender document
Nos
1
223
INDFMS-69 2x8 mm (Drill Bit) Specification: As per tender document
Nos
1
224
INDFMS-70 26 gauge stainless steel wire Specification: As per tender document
Nos
1
225
INDFMS-71 Eric\s arch bar Specification: As per tender document
Nos
1
226
INDFMS-72 2 mm Lambda Plates Specification: As per tender document
Nos
1
227
INDFMS-73 Anatomical Thin Titanium Mesh Plates Specification: As per tender document
Nos
1
228
IMPFMS-01 MICRO PLATES - 0.4MM Specification: As per tender document
Nos
1
229
IMPFMS-02 Orbital rim plate (Micro Plates - 0.4 MM) Specification: As per tender document
Nos
1
230
IMPFMS-03 20-holes adaption plate (Micro Plates - 0.4 MM) Specification: As per tender document
Nos
1
231
IMPFMS-04 Y plate (Micro Plates - 0.4 MM) Specification: As per tender document
Nos
1
232
IMPFMS-05 Double Y plate (Micro Plates - 0.4 MM) Specification: As per tender document
Nos
1
233
IMPFMS-06 Frame plate (3D plates) (Micro Plates - 0.4 MM) Specification: As per tender document
Nos
1
234
IMPFMS-07 X plate (Micro Plates - 0.4 MM) Specification: As per tender document
Nos
1
235
IMPFMS-08 Titanium strut plate 18 holes (Micro Plates - 0.4 MM) Specification: As per tender document
Nos
1
236
IMPFMS-09 ORBITAL mesh - 0.2 - 0.4mm Specification: As per tender document
Nos
1
237
IMPFMS-10 MINI PLATES-0.5MM Specification: As per tender document
Nos
1
238
IMPFMS-11 Orbital rim plate (Mini Plates - 0.5 MM) Specification: As per tender document
Nos
1
239
IMPFMS-12 20-holes adaption plate (Mini Plates - 0.5 MM) Specification: As per tender document
Nos
1
240
IMPFMS-13 Y plate (Mini Plates - 0.5 MM) Specification: As per tender document
Nos
1
241
IMPFMS-14 Double Y plate (Mini Plates - 0.5 MM) Specification: As per tender document
Nos
1
242
IMPFMS-15 Frame plate (3D plates) (Mini Plates - 0.5 MM) Specification: As per tender document
Nos
1
243
IMPFMS-16 X plate (Mini Plates - 0.5 mm) Specification: As per tender document
Nos
1
244
IMPFMS-17 Titanium strut plate 18 holes (Mini Plates - 0.5 MM) Specification: As per tender document
Nos
1
245
IMPFMS-18 L plate all types (Mini Plates - 0.5 MM) Specification: As per tender document
Nos
1
246
IMPFMS-19 H plate (Mini Plates - 0.5 MM) Specification: As per tender document
Nos
1
247
IMPFMS-20 MEDIUM PLATES-0.7MM Specification: As per tender document
Nos
1
248
IMPFMS-21 Orbital rim plate (Medium Plates - 0.7 MM) Specification: As per tender document
Nos
1
249
IMPFMS-22 20-holes adaption plate (Medium Plates - 0.7 MM) Specification: As per tender document
Nos
1
250
IMPFMS-23 Y plate (Medium Plates - 0.7 MM) Specification: As per tender document
Nos
1
251
IMPFMS-24 Double Y plate (Medium Plates - 0.7 MM) Specification: As per tender document
Nos
1
252
IMPFMS-25 Frame plate (3D plates) (Medium Plates - 0.7 MM) Specification: As per tender document
Nos
1
253
IMPFMS-26 X plate (Medium Plates - 0.7 MM) Specification: As per tender document
Nos
1
254
IMPFMS-27 Titanium strut plate 18 holes (Medium Plates - 0.7 MM) Specification: As per tender document
Nos
1
255
IMPFMS-28 L plate all types (Medium Plates - 0.7 MM) Specification: As per tender document
Nos
1
256
IMPFMS-29 H plate (Medium Plates - 0.7 MM) Specification: As per tender document
Nos
1
257
IMPFMS-30 LARGE PLATES-1MM Specification: As per tender document
Nos
1
258
IMPFMS-31 20-holes adaption plate (Large -1MM) Specification: As per tender document
Nos
1
259
IMPFMS-32 Y plate (Large -1MM) Specification: As per tender document
Nos
1
260
IMPFMS-33 Double Y plate (Large -1MM) Specification: As per tender document
Nos
1
261
IMPFMS-34 X-plate (Large -1MM) Specification: As per tender document
Nos
1
262
IMPFMS-35 Titanium strut plate 18 holes Specification: As per tender document
Nos
1
263
IMPFMS-36 L plate all types Specification: As per tender document
Nos
1
264
IMPFMS-37 H plate Specification: As per tender document
Nos
1
265
IMPFMS-38 SCREWS Specification: As per tender document
Nos
1
266
IMPFMS-39 Screws from 4-12 MM all sizes Specification: As per tender document
Nos
1
267
IMPFMS-40 Mandibular Reconstruction plate straight and angled Specification: As per tender document
Nos
1
268
INDPS-01 Cortical Screws (Size - 1.2, 1.3, 1.5, 2, 2.4 mm Length - 6 mm to 32 mm) Specification: As per tender document
Nos
1
269
INDPS-02 Plates - LCP / Straight plates / T and Y plates / condylar plates / H plates -(Size - 1.2, 1.3, 1.5, 2, 2.4 mm) Specification: As per tender document
Nos
1
270
INDPS-03 Headless compression screws / Herbert screw (Size - 2.4mm Length (9 to 44m) Specification: As per tender document
Nos
1
271
INDPS-04 Headless compression screws / Herbert screw (Size -3mm Length (9 to 44m) Specification: As per tender document
Nos
1
272
INDPS-05 Distal ulna- Hook plate (LCP) (Size -2 mm) Specification: As per tender document
Nos
1
273
INDPS-06 Distal radius Volar locking plates- Variable angle, volar lip plate, dorsal plates, radial styloid plate, fragment specific plate (Size - 2.7mm) Specification: As per tender document
Nos
1
274
INDPS-07 Suture anchors-single/double loaded with needle, Fiber wire no. 2 (Size -1.6, 2.3, 3.5mm) Specification: As per tender document
Nos
1
275
INDPS-08 Limb Reconstruction System (Rail Fixation System) for upper limb (Size - 1.2mm, 1.6mm,2mm, 2.2mm with respective clamps and distractors) Specification: As per tender document
Nos
1
276
INDPS-09 Vascular clips (small) Specification: As per tender document
Nos
1
277
INDPS-10 Vascular clips (medium) Specification: As per tender document
Nos
1
278
INDPS-11 Vascular clips (large) Specification: As per tender document
Nos
1
279
INDPS-12 Fogarty Catheter (Size 2mm) Specification: As per tender document
Nos
1
280
INDPS-13 Fogarty Catheter (Size 3 mm) Specification: As per tender document
Nos
1
281
INDPS-14 Fogarty Catheter (Size 4 mm) Specification: As per tender document
Nos
1
282
INDPS-15 Fogarty Catheter (Size 5 mm) Specification: As per tender document
Nos
1
283
IMPPS-01 Cortical Screws (Size - 1.2, 1.3, 1.5, 2, 2.4 mm Length - 6 mm to 32 mm) Specification: As per tender document
Nos
1
284
IMPPS-02 Plates - LCP / Straight plates / T and Y plates / condylar plates / H plates -(Size - 1.2, 1.3, 1.5, 2, 2.4 mm) Specification: As per tender document
Nos
1
285
IMPPS-03 Headless compression screws (Size - 2.4 mm Length (9 to 44m) Specification: As per tender document
Nos
1
286
IMPPS-04 Headless compression screws (Size - 3mm Length (9 to 44m) Specification: As per tender document
Nos
1
287
IMPPS-05 Distal ulna- Hook plate (LCP) (Size -2 mm) Specification: As per tender document
Nos
1
288
IMPPS-06 Distal radius Volar locking plates - Variable angle, volar lip plate, dorsal plates, radial styloid plate, fragment specific plate (Size - 2.7mm) Specification: As per tender document
Nos
1
289
IMPPS-07 Suture anchors-single/double loaded with needle, suture no 2, and 3-0 (Size - 1.3,1.6, 2.3,3.5mm) Specification: As per tender document
Nos
1
290
IMPPS-08 Limb Reconstruction System (Rail Fixation System) for upper limb and hand (Size - 1.2mm, 1.6mm,2mm, 2.2mm with respective clamps and distractors) Specification: As per tender document
Nos
1
291
IMPPS-09 Nerve Glue (Ready to use mix without preparation. 5ml preparation) Specification: As per tender document
Nos
1
292
IMPPS-10 Radial Head Prosthesis (Modular) (18 to 29 size cobalt chrome head and smooth titanium stem) Specification: As per tender document
Nos
1
293
IMPPS-11 Arthroscopic shaver and burr (Compatible with Formula system) (Shaver 2.5mmm, Burr 2mm) Specification: As per tender document
Nos
1
294
IMPPS-12 Arthroscope Radio frequency Probe with cable (Size - 2.3mm) Specification: As per tender document
Nos
1
295
MICROVASC-01 Micro forceps - 11cm long, flat handle, 9mm wide, angulate 45 degrees Specification: As per tender document
Nos
1
296
MICROVASC-02 Vessel dilators - 11cm long, flat handle, 9mm wide, angulate 10 degrees Specification: As per tender document
Nos
1
297
MICROVASC-03 Needle holder curved - 15cm long, round handle, 8mm diameter (0.4mm tip) Specification: As per tender document
Nos
1
298
MICROVASC-04 Clamps (single and double - vein pattern) - (a) 6x36x16x3.0 mm Specification: As per tender document
Nos
1
299
MICROVASC-05 Clamps (single and double - vein pattern) - (b) 4x24x10x2.2 mm Specification: As per tender document
Nos
1
300
MICROVASC-06 Clamp box 70 x 45mm Specification: As per tender document
Nos
1
301
MICROVASC-07 Diethrich Bull dog clamp (straight) - 45mm Specification: As per tender document
Nos
1
302
MICROVASC-08 Diethrich Bull dog clamp (curved) - 55mm Specification: As per tender document
Nos
1
303
MICROVASC-09 Lead hand - adult - with malleable and durable lead Specification: As per tender document
Nos
1
304
MICROVASC-10 Vessel loops - red (0.8 x 406mm) Specification: As per tender document
Nos
1
305
MICROVASC-11 Vessel loops - blue (0.8 x 406mm) Specification: As per tender document
Nos
1
306
MICROVASC-12 Vessel loops - Yellow (0.8 x 406mm) Specification: As per tender document
Nos
1
307
ARTHROPLASTY-1 UNCEMENTED THR (Indian) (Full Component Femoral plus Tibial plus Insert) Specification: As per tender document
Nos
1
308
ARTHROPLASTY-2 UNCEMENTED LONG STEM BIPOLAR HEMIARTHROPLASTY (Indian) (Long stem uncemented plus Modular Bipolar head) Specification: As per tender document
Nos
1
309
ARTHROPLASTY-3 EXTENSION RODS / STEM FOR COMPLEX PRIMARY TKR (Indian) (Femoral Component plus Tibial Component plus Insert plus Tibial extension rod) Specification: As per tender document
Nos
1
310
ARTHROPLASTY-4 EXTENSION RODS / STEM FOR COMPLEX PRIMARY TKR (Imported) (Femoral Component plus Tibial Component plus Insert plus Tibial extension rod) Specification: As per tender document
Nos
1
311
ARTHROPLASTY-5 UNCEMENTED MODULAR BIPOLAR HEMIARTHROPLASTY (Indian) (HA coated stem plus Modular Bipolar Head Specification: As per tender document
Nos
1
312
ARTHROPLASTY-6 HFN NAIL (Hip Fracture Nail) Specification: As per tender document
Nos
1

AI Tender Summary

OUR REF NO 27649200
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 17-05-2021
Authority
Authority Name Sanjay Gandhi Institute Of Trauma And Orthopaedics
Work Description Supply Of Arthroscopy And Other Implants 1. Fixed Loop, 2. Adjustable Loop, 3. Peek Screw, 4. Titanium Screw, 5. Bio Screw, 6. Fiber Tape, 7. Meniscal Repair Device, 8. Post Fixation Screw, 9. Suture Disk, 10. Staple, 11. Cancellous Screw, 12. Spiked Wahser, 13. Fibre Wire, 14. (A) 5 Mm Titanium Anchor (For Rotator Cuff Repair) (Ultra Bio Fiber Wire Material, Anchor Loaded With No.2 Fiber Wire, 2 Loaded And 3 Loaded, Self Tapping And Self Drill Anchor), 15. (B) 5 Mm Titaniaum Anchor (For Rotator Cuff Repair) (Ultra Bio Fiber Wire Material, 4 Needle, Anchor Loaded With No.2 Fiber Wire, 2 Loaded, Self Tapping And Self Drill Anchor), 16. Lateral Row Anchor ( Rotator Cuff Repair ) Peek Optima Material, Metal Tip With Self Tapping Anchor, Dia 5.5Mm, 17. 5.5 Mm Peek Anchor ( For Rotator Cuff Repair ), 18. Lateral Row Anchor ( Rotator Cuff Repair ) Peek Optima Material, Dia 5.5Mm, Use With 5.5Mm Punch, 19. 2.8Mm Titanium Anchor (For Bankart Repair) Ultra Bio Fiber Wire Material, Anchor Loaded With No. 2 Fiber Wire, 1 Loaded, Self Tapping And Self Drill Anchor, Titanium Tip Material, 20. 2.8Mm Titanium Anchor ( For Bankart Repair) Ultra Bio Fiber Wire Material, 2 Needle, Anchor Loaded With No.2 Fiber Wire, 1 Loaded, Self Tapping And Self Drill Anchor,Titanium Tip Material, 21. Peek Anchor (For Bankart Repair), 22. Knotless Anchor (For Bankart Repair), 23. Cannula -Trocar Sets, 24. Radial Head Prosthesis, 25. Laterjet Screw, 26. Hto Plates, 27. Adjustable Loop -Titanium Button For Femoral Fixation Of Dimension 12X4 Mm With Adjustable Loop With Sizes Ranging From 10-105Mm (Made Of Ultra High Molecular Weight Polyethylene) Used For Acl Reconstruction, 28. Fixed Loop - Titanium Button With 2 Accessory Sutures For Femoral Fixation With Loop Size (Polyster Polyethylene Terepthalate) For Acl Reconstruction Length 10, 15, 20, 25, 30 Mm), 29. Buttons - Fixation Device, Used In Conjunction With Any Adjustable And Fixed Loop Device,Should Allow 6 Mm To 10 Mm Area Of The Femoral Tunnel To Be Covered, 30. Plla Ha Screws For Tibial/Femoral Fixation In Acl, 31. Plga Beta Tcp Cs Screws For Tibial/Femoral Fixation In Acl, 32. Peek Interference Screws For Tibial/Femoral Fixation In Acl Construction, 33. Titanium Interference Screws For Tibial / Femoral Fixation In Acl Reconstruction, 34. Shoulder - Instability / Anchors - Titanium Anchor (3.0 Mm Titanium Screw In Anchors With High And Low Threads Design, Preloaded With Single/Double Ultra High Molecular Weight Polyethylene Braided Fiber For Bankart/Slap Repair, 35. Shoulder - Instability / Anchors - Peek Anchor (3.0 Mm Peek Tap In Anchors, Preloaded With Single/Double Ultra High Molecular Weight Polyethylene Braided Fiber For Bankart/Slap Repair), 36. Suture Anchor - 1.7 Mm And 1.9 Mm All Suture Tap In Anchor Made Up Of High Molecular Weight Polyethylene Braided Fibre And Preloaded With Single/Double Ultrahigh Molecular Weight Polyethylene Braided Sutures Which Opens Up To 3 Mm Post Deployment With Special Deployment Mechanism Through Unique Visual, Tactile And Auditory Cues Intended For Instability Repair, 37. Titanium Anchor With Needle - 3.0 Mm Titanium Screw In Anchors With High And Low Threads Design, Preloaded With Single/Double Ultrahigh Molecular Weight Polyethylene Braided Fiber For Rotator Cuff Repair, 38. Rotator Cuff Anchors - Titanium Anchor - 5.0Mm And 6.5 Mm Titanium Screw In Anchors With High And Low Threads Design, Preloaded With Double/Tripple Ultrahigh Molecular Weight Polyethylene Braided Fiber For Rotator Cuff Repair, 39. Peek Anchor - 4.5Mm,5.5Mm And 6.5Mm Peek Tap In Anchors, Preloaded At Distal End Of The Anchor With Double/ Tripple Ultrahigh Molecular Weight Polyethylene Braided Fiber For Rotator Cuff Repair, 40. Titanium Anchor With Needle - 5.0 Mm And 6.5 Mm Titanium Screw In Anchors With High And Low Threads Design, Preloaded With Single / Double Ultra High Molecular Weight Polyethylene Braided Fiber And Sharp Curved Needle End For Bankart/Slap Repair, 41. Bio Absorbable Screws For Acl, 42. Acl Adjustable Loop Button, 43. Acl Fixed Loop Button, 44. Acl Titanium Screw, 45. Meniscus All Inside Repair, 46. Shoulder Dislocation Anchors - Soft Anchors, 47. Shoulder Disloacation Anchor - Peek, 48. Shoulder Dislocation Anchors - Knotless, 49. Shoulder Dislocation Anchors - Metal, 50. Rotator Cuff Repair Anchors - Peek And Bio Anchors, 51. Rotator Cuff Repair Anchors - Metal, 52. Rotator Cuff Anchors - Knotless, 53. Femoral And Tibial Cortical Fixation Devices For Cruciate Ligament Reconstruction, 54. Graft Fixation Devices-Bio Absorbable, 55. Graft Fixation Devices -Titanium, 56. Graft Fixation Devices -Peek, 57. The Implants For Meniscus Repair Done Through An Arthroscopic Procedure, 58. The Implants For Meniscus Repair By An Inside Out Technique, 59. The Disposable Suture Shuttling Device For The Outside In Technique, 60. Attachable Button For Acl/Pcl Reconstruction, 61. Adjustable Button System For Tibial Fixation, 62. The All Suture Soft Anchor Used For Instability Repair, 63. The Knotless All Suture Soft Anchor Used For Glenoid Labrum Repair, 64. The Titanium Suture Anchor Used For Slap And Bankart Repair, 65. The Bioabsorbable Knotted Suture Anchors Used For Slap And Bankart Repair, 66. The Bioabsorbabale Knotless Suture Anchor Used For Arthroscopic Stability Procedures In The Glenohumeral Joint, 67. The Peek Knotless Suture Anchor Used For Arthroscopic Stability Procedures In The Glenohumeral Joint, 68. The Titanium Suture Anchor For Rotator Cuff Repair, 69. The Bioabsorbable Suture Anchor For Rc Repair, 70. The Biosbsorbable Knotless Suture Anchor For Cuff Repair, 71. Uhmwpe Suture And 2-0 Tape, 72. Uhmwpe Suture And 1.3 Mm Tape, 73. Suture Shuttling Instruments (The Disposable Instrument Used For Arthroscopic Suture Passing), 74. Meniscus Suture Shuttling Device (The Disposable Instrument For Arthroscopic Suturing Of The Meniscotibial Ligaments Of The Posterior Horn Of The Medial Meniscus Or Peripheral Posterior Medial Meniscus), 75. Underwater Ablation Probes For Arthroscopy Procedures (The Ablation Wands Used In Arthroscopic Procedures), 76. Twist-In Cannulas (The Arthroscopic Cannulas For Direct Visualisation Of Instruments And Suture Passing), 77. Flexible Silicone Button Cannula (The Cannulas Which Help Maximize Visibility And Manoeuvrability Inside And Outside Of The Arthroscopic Work Space, 78. A C Joint Reconstruction Using Adjustable Loop, Tapes And Buttons - The Implants / Kit For The Arthroscopic Anatomic Stabilization Of Acute Acromioclavicular Joint Dislocation), 79. The Implants/Kit For The Stabilization Of Acute Acromioclavicular Joint Dislocations, 80. Implants For Latarjet - (The Screws And Small Plate For Coracoid Fixation), 81. Drill Tip Guide Pin Cum Retrograde Reamers, 82. Stiffened Uhmwpe Suture, 83. Uhmwpe Continuous Loop With Needle, 84. Uhmwpe Loop With Tape W/Needle Graft Stitching For Acl Reconstruction Using Quadriceps Tendon, 85. Adjustable Loop / Button (Titanium Button For Femoral Fixation Of Dimension 12X4 Mm With Adjustable Loop With Sizes Ranging From 10-105Mm (Made Of Ultra High Molecular Weight Polyethylene) Used For Acl Reconstruction), 86. Fixed Loop (Titanium Button With 2 Accessory Sutures For Femoral Fixation With Loop Size (Polyster Polyethylene Terepthalate) For Acl Reconstruction), 87. Safety Button (Xentdo Button) 5.5 X 20Mm Titanium Button, 88. Bio Absorbable Screws (1St Gen) (Plla Plus Ha), 89. Bio Absorbable Screws (2Nd Gen) (Plla Ha Screws For Tibial/Femoral Fixation In Acl), 90. Bio Absorbable Screws (3Rd Gen) (Plga Beta Tcp Cs Screws For Tibial/Femoral Fixation In Acl), 91. Peek Screws (Peek Interference Screws For Tibial/Femoral Fixation In Acl Reconstruction), 92. All Inside Meniscus Repair (Meniscal Repair Implant For All Inside Technique), 93. Outside In Meniscus Repair (Meniscus Mendor), 94. Instability Anchors (Small Size Anchors) -Titanium Anchors, 95. Peek Anchors - 2.3Mm And 2.9Mm Peek Tap In Anchors, Preloaded With Single/Double Ultrahigh Molecular Weight Polyethylene Braided Fiber For Bankart/Slap Repair, 96. Bio Absorbable Anchor (Plla Plus Ha) -2.3Mm And 2.9 Mm Bioabsorbable (75 Percent Plla And 25 Percent Ha) Tap In Anchors, Preloaded With Single/Double Ultrahigh Molecular Weight Polyethylene Braided Fiber For Bankart/Slap Repair, 97. All Suture Anchors, 98. All Suture Anchors (Latest) (Q Shaped Bulb Anchor 1.8 Mm), 99. Knotless Anchors (Peek), 100. Rotator Cuff Anchors (Big Size Anchors) All Suture Anchor (Q Shaped Bulb Anchor 2.8 Mm), 101. Titanium Anchor (5.0Mm And 6.5 Mm Titanium Screw In Anchors With High And Low Threads Design, Preloaded With Double/Tripple Ultra High Molecular Weight Polyethylene Braided Fiber For Rotator Cuff Repair), 102. Peek Anchor, 103. Peek Anchor (Open Architect Anchor), 104. Bio Absorbable Anchor (Plla, Ha Anchor), 105. Bio Absorbable (3Rd Gen) (Open Architect Anchor With Biocomposite Plga, Btcp, Cs), 106. Knotless Anchors For Rotator Cuff Repair - Peek Knotless, 107. Peek Knotless (Latest) (Knotless Peek With Double Locking High Pitch Screw Anchor), 108. Suture Passer (Instability), 109. Suture Passer (Rotator Cuff) (Gun Shaped Suture Passer For Rotator Cuff), 110. All Suture Soft Anchor 1Mm Mini (Shoulder), 111. All Suture Soft Anchor 1.5Mm For Bankart Repair (Shoulder), 112. All Suture Soft Anchor 2.9Mm For Bankart And Rotator Cuff Repair (Shoulder), 113. Peek Suture Anchors 5.5Mm And 6.5Mm For Rotator Cuff Repair (Shoulder), 114. Peek Anchors With Tape 5.5Mm And 6.5Mm (Shoulder), 115. Knotless Anchors For Rotator Cuff Repair (Shoulder), 116. Knotless Anchors, 2.9Mm For Bankart Repair (Shoulder), 117. Peek Suture Anchors, 2.9Mm For Labral Repair (Shoulder), 118. Femoral Fixation Buttons For Acl/Pcl (Knee), 119. Tibial Fixation Screws For Acl/Pcl (Knee), 120. Meniscal Repair Implant (Knee), 121. Meniscal Repair Suture Cutter (Knee), 122. All Suture Anchors For Shoulder, 123. Bioscrew For Shoulder, 124. Peek Anchor For Shoulder, 125. Titanium Intraline Anchors (Shoulder), 126. Lateral Row Anchors For Rotator Cuff Repair (Shoulder), 127. Knotless Anchor For Bankart/Slap, 128. Peek Anchor For Bankart/Slap Repair, 129. All Suture Anchors With Tieable Tape, 130. Titanium Glenoid Anchor For Shoulder, 131. Peek Anchor For Rotator Cuff, 132. Adjustable Size Loop For Acl Fumoral Fixation (Knee), 133. Fixed Size Loop For Acl Fumoral Fixation (Knee), 134. Titanium Screw Acl Tibial Fixation (Knee), 135. Screws For Tibial Acl Fixation (Knee), 136. All Inside Meniscus Repair Devices (Knee), 137. Meniscus Repair Inside Out (Inside Out Meniscus Repair Handle), 138. Inside Out Meniscus Repair Cannulae, 139. Inside Out Needles For Meniscus Repair, 140. 5.5Mm X 75Mm Cannula For Shoulder Arthroscopy. Should Have Threads On Entire Body Of Cannula. Should Be Supplied As Sterile Pack., 141. 6.5Mm X 75Mm Cannula For Shoulder Arthroscopy. Should Have Threads On Entire Body Of Cannula. Should Be Supplied As Sterile Pack., 142. 8Mm X 75Mm Cannula For Shoulder Arthroscopy. Should Have Threads On Entire Body Of Cannula. Should Be Supplied As Sterile Pack., 143. 8Mm X 90Mm Cannula For Shoulder Arthroscopy. Should Have Threads On Entire Body Of Cannula. Should Be Supplied As Sterile Pack., 144. Disposable Nitinol Needle For Scorpion Or Equivalent Suture Passer For Cuff Repair. Instrument Should Be Provided On Case To Case Basis., 145. Suture Lasso 45 Degree Right For Instability Repair. Should Be Supplied With One Nitinol Shuttle Or Loop To Be Used With It., 146. Suture Lasso 45 Degree Left For Instability Repair. Should Be Supplied With One Nitinol Shuttle Or Loop To Be Used With It., 147. 4Mm-4.5Mm Shaver Blade To Be Used With Arthroscopic Shaver System. Blade Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 148. 5Mm/5.5Mm Barrel Shaped Fluted Shaver Burr To Be Used With Arthroscopic Shaver System. Blade Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 149. Disposable 90 Degree And 50 Degree Radio Frequency Bipolar Probes With Suction For Ablation During Arthroscopy. Probes Should Be Hand Controlled. Probes Should Be Compatible With Machine In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 150. 2Mm-2.5Mm Shaver Blade To Be Used With Arthroscopic Shaver System For Small Joint Arthroscopy. Blade Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 151. 2Mm-2.5Mm Shaver Burr To Be Used With Arthroscopic Shaver System For Small Joint Arthroscopy. Blade Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 152. Disposable Hook Shaped Radio Frequency Bipolar Probes With Suction For Ablation During Arthroscopy. Probes Should Be Hand Controlled. Probes Should Be Compatible With Machine In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 153. 4Mm Hood Shaped Fluted Shaver Burr To Be Used With Arthroscopic Shaver System. Blade Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 154. Integrated Pump Tubing (Inflow-Outflow Tubing) To Be Used Arthroscopy Pump For Pumping Saline During Arthroscopy Procedures. Should Be Compatible With Shaver System In Ot Or Supplier Has To Provide Machine On Case To Case Basis., 155. Plate Thickness-1.5Mm, 156. 2 Hole With Gap (Thickness - 1.5 Mm) Plate, 157. 3 Hole With Gap (Thickness - 1.5 Mm) Plate, 158. 4 Hole Withh Gap (Thickness - 1.5 Mm) Plate, 159. 4 Hole Withut Gap (Thickness - 1.5 Mm) Plate, 160. 5 Hole With Gap (Thickness - 1.5 Mm) Plate, 161. 5 Hole Without Gap (Thickness - 1.5 Mm) Plate, 162. 6 Hole With Gap (Thickness - 1.5 Mm) Plate, 163. 6 Hole Without Gap (Thickness - 1.5 Mm) Plate, 164. Orbital Plate, 165. 4 Hole With Gap (Orbital Plate), 166. 4 Hole Without Gap (Orbital Plate), 167. 5 Hole Wth Gap (Orbital Plate), 168. 6 Hole With Gap (Orbital Plate), 169. 6 Hole Withou Gap (Orbital Plate), 170. L Plate Left And Right Side (Orbital Plate), 171. Y (Orbital Plate), 172. X (Orbital Plate), 173. Screws, 174. 1.5X4mm (Screws), 175. 1.5X6mm (Screws), 176. 1.5X8mm (Screws), 177. Thickness-2Mm Plate, 178. 2 Hole With Gap (Thickness - 2 Mm Plate), 179. 3 Hole With Gap (Thickness - 2 Mm Plate), 180. 4 Hole With Gap (Thickness - 2 Mm Plate), 181. 4 Hole Without Gap (Thickness - 2 Mm Plate), 182. 5 Hole With Gap (Thickness - 2 Mm Plate), 183. 5 Hole Without Gap (Thickness - 2 Mm Plate), 184. 6 Hole With Gap (Thickness - 2 Mm Plate), 185. 6 Hole Without Gap (Thickness - 2 Mm Plate), 186. Straight Plate 10 Hole (Thickness - 2 Mm Plate), 187. Straight Plate 20 Hole (Thickness - 2 Mm Plate), 188. L Plate Right And Left (Thickness - 2 Mm), 189. Y Plate (Thickness - 2 Mm), 190. X Plate (Thickness - 2 Mm), 191. Screws, 192. 2X4 Mm Screws, 193. 2X6 Mm Screws, 194. 2X8 Mm Screws, 195. Thickness - 2.5Mm Plate, 196. 2 Hole With Gap (Thickness - 2.5 Mm Plate), 197. 3 Hole With Gap (Thickness - 2.5 Mm Plate), 198. 4 Hole With Gap (Thickness - 2.5 Mm Plate), 199. 4 Hole Without Gap (Thickness - 2.5 Mm Plate), 200. 5 Hole With Gap (Thickness - 2.5 Mm Plate), 201. 5 Hole Without Gap (Thickness - 2.5 Mm Plate), 202. 6 Hole With Gap (Thickness - 2.5 Mm Plate), 203. 6 Hole Without Gap (Thickness - 2.5 Mm Plate), 204. Straight Reconstruction Plate, 205. Angle Reconstruction Plate, 206. Screws, 207. 2.5X4 Mm Screws, 208. 2.5X6 Mm Screws, 209. 2.5X8 Mm Screws, 210. Orbital Floor Mesh, 211. Titanium Mesh 6X6, 212. Titanium Mesh 4X4, 213. Drill Bit, 214. 1.1X6 Mm (Drill Bit), 215. 1.1X8 Mm (Drill Bit), 216. 1.3X6 Mm (Drill Bit), 217. 1.3X8 Mm (Drill Bit), 218. 1.5X6 Mm (Drill Bit), 219. 1.5X8 Mm (Drill Bit), 220. 1.7X6 Mm (Drill Bit), 221. 1.7X8 Mm (Drill Bit), 222. 2X6 Mm (Drill Bit), 223. 2X8 Mm (Drill Bit), 224. 26 Gauge Stainless Steel Wire, 225. Erics Arch Bar, 226. 2 Mm Lambda Plates, 227. Anatomical Thin Titanium Mesh Plates, 228. Micro Plates - 0.4Mm, 229. Orbital Rim Plate (Micro Plates - 0.4 Mm), 230. 20-Holes Adaption Plate (Micro Plates - 0.4 Mm), 231. Y Plate (Micro Plates - 0.4 Mm), 232. Double Y Plate (Micro Plates - 0.4 Mm), 233. Frame Plate (3D Plates) (Micro Plates - 0.4 Mm), 234. X Plate (Micro Plates - 0.4 Mm), 235. Titanium Strut Plate 18 Holes (Micro Plates - 0.4 Mm), 236. Orbital Mesh - 0.2 - 0.4Mm, 237. Mini Plates-0.5Mm, 238. Orbital Rim Plate (Mini Plates - 0.5 Mm), 239. 20-Holes Adaption Plate (Mini Plates - 0.5 Mm), 240. Y Plate (Mini Plates - 0.5 Mm), 241. Double Y Plate (Mini Plates - 0.5 Mm), 242. Frame Plate (3D Plates) (Mini Plates - 0.5 Mm), 243. X Plate (Mini Plates - 0.5 Mm), 244. Titanium Strut Plate 18 Holes (Mini Plates - 0.5 Mm), 245. L Plate All Types (Mini Plates - 0.5 Mm), 246. H Plate (Mini Plates - 0.5 Mm), 247. Medium Plates-0.7Mm, 248. Orbital Rim Plate (Medium Plates - 0.7 Mm), 249. 20-Holes Adaption Plate (Medium Plates - 0.7 Mm), 250. Y Plate (Medium Plates - 0.7 Mm), 251. Double Y Plate (Medium Plates - 0.7 Mm), 252. Frame Plate (3D Plates) (Medium Plates - 0.7 Mm), 253. X Plate (Medium Plates - 0.7 Mm), 254. Titanium Strut Plate 18 Holes (Medium Plates - 0.7 Mm), 255. L Plate All Types (Medium Plates - 0.7 Mm), 256. H Plate (Medium Plates - 0.7 Mm), 257. Large Plates-1Mm, 258. 20-Holes Adaption Plate (Large -1Mm), 259. Y Plate (Large -1Mm), 260. Double Y Plate (Large -1Mm), 261. X-Plate (Large -1Mm), 262. Titanium Strut Plate 18 Holes, 263. L Plate All Types, 264. H Plate, 265. Screws, 266. Screws From 4-12 Mm All Sizes, 267. Mandibular Reconstruction Plate Straight And Angled, 268. Cortical Screws (Size - 1.2, 1.3, 1.5, 2, 2.4 Mm Length - 6 Mm To 32 Mm), 269. Plates - Lcp / Straight Plates / T And Y Plates / Condylar Plates / H Plates -(Size - 1.2, 1.3, 1.5, 2, 2.4 Mm), 270. Headless Compression Screws / Herbert Screw (Size - 2.4Mm Length (9 To 44M), 271. Headless Compression Screws / Herbert Screw (Size -3Mm Length (9 To 44M), 272. Distal Ulna- Hook Plate (Lcp) (Size -2 Mm), 273. Distal Radius Volar Locking Plates- Variable Angle, Volar Lip Plate, Dorsal Plates, Radial Styloid Plate, Fragment Specific Plate (Size - 2.7Mm), 274. Suture Anchors-Single/Double Loaded With Needle, Fiber Wire No. 2 (Size -1.6, 2.3, 3.5Mm), 275. Limb Reconstruction System (Rail Fixation System) For Upper Limb (Size - 1.2Mm, 1.6Mm,2Mm, 2.2Mm With Respective Clamps And Distractors), 276. Vascular Clips (Small), 277. Vascular Clips (Medium), 278. Vascular Clips (Large), 279. Fogarty Catheter (Size 2Mm), 280. Fogarty Catheter (Size 3 Mm), 281. Fogarty Catheter (Size 4 Mm), 282. Fogarty Catheter (Size 5 Mm), 283. Cortical Screws (Size - 1.2, 1.3, 1.5, 2, 2.4 Mm Length - 6 Mm To 32 Mm), 284. Plates - Lcp / Straight Plates / T And Y Plates / Condylar Plates / H Plates -(Size - 1.2, 1.3, 1.5, 2, 2.4 Mm), 285. Headless Compression Screws (Size - 2.4 Mm Length (9 To 44M), 286. Headless Compression Screws (Size - 3Mm Length (9 To 44M), 287. Distal Ulna- Hook Plate (Lcp) (Size -2 Mm), 288. Distal Radius Volar Locking Plates - Variable Angle, Volar Lip Plate, Dorsal Plates, Radial Styloid Plate, Fragment Specific Plate (Size - 2.7Mm), 289. Suture Anchors-Single/Double Loaded With Needle, Suture No 2, And 3-0 (Size - 1.3,1.6, 2.3,3.5Mm), 290. Limb Reconstruction System (Rail Fixation System) For Upper Limb And Hand (Size - 1.2Mm, 1.6Mm,2Mm, 2.2Mm With Respective Clamps And Distractors), 291. Nerve Glue (Ready To Use Mix Without Preparation. 5Ml Preparation), 292. Radial Head Prosthesis (Modular) (18 To 29 Size Cobalt Chrome Head And Smooth Titanium Stem), 293. Arthroscopic Shaver And Burr (Compatible With Formula System) (Shaver 2.5Mmm, Burr 2Mm), 294. Arthroscope Radio Frequency Probe With Cable (Size - 2.3Mm), 295. Micro Forceps - 11Cm Long, Flat Handle, 9Mm Wide, Angulate 45 Degrees, 296. Vessel Dilators - 11Cm Long, Flat Handle, 9Mm Wide, Angulate 10 Degrees, 297. Needle Holder Curved - 15Cm Long, Round Handle, 8Mm Diameter (0.4Mm Tip), 298. Clamps (Single And Double - Vein Pattern) - (A) 6X36x16x3.0 Mm, 299. Clamps (Single And Double - Vein Pattern) - (B) 4X24x10x2.2 Mm, 300. Clamp Box 70 X 45Mm, 301. Diethrich Bull Dog Clamp (Straight) - 45Mm, 302. Diethrich Bull Dog Clamp (Curved) - 55Mm, 303. Lead Hand - Adult - With Malleable And Durable Lead, 304. Vessel Loops - Red (0.8 X 406Mm), 305. Vessel Loops - Blue (0.8 X 406Mm), 306. Vessel Loops - Yellow (0.8 X 406Mm), 307. Uncemented Thr (Indian) (Full Component Femoral Plus Tibial Plus Insert), 308. Uncemented Long Stem Bipolar Hemiarthroplasty (Indian) (Long Stem Uncemented Plus Modular Bipolar Head), 309. Extension Rods / Stem For Complex Primary Tkr (Indian) (Femoral Component Plus Tibial Component Plus Insert Plus Tibial Extension Rod), 310. Extension Rods / Stem For Complex Primary Tkr (Imported) (Femoral Component Plus Tibial Component Plus Insert Plus Tibial Extension Rod), 311. Uncemented Modular Bipolar Hemiarthroplasty (Indian) (Ha Coated Stem Plus Modular Bipolar Head, 312. Hfn Nail (Hip Fracture Nail),
Basic Detail
Tender No SGITO/2021-22/IND84
Bidding Type Tender
Location
City BANGALORE
State Karnataka
Key Dates
Publish Date 12 Apr 2021
Submission Date 17 May 2021
Open Date 19 May 2021
Finance
Tender Value Ref. Documents
Tender Fee 550
EMD 10000
Exemption Not Available
Document List
3ed8da18-5b69-4a07-8a02-6c6f2d7c690a.html
bidding document for arthroscopy implants .doc

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 12, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
May 17, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 19, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

3ed8da18-5b69-4a07-8a02-6c6f2d7c690a.html

doc

bidding document for arthroscopy implants .doc

TenderDetail
Loading tenders