Constructing Anganwadi Building At Udhale Bk Tal Khed Dist Ratnagir
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Apr 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khed → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Anganwadi Building At Udhale Bk Tal Khed Dist Ratnagir
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1:- Excavation for foundation in hard murum including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as specified, stacking and spreading as directed including dewatering unless provided etc complate |
| 2 | Item No.2:- Excavation for foundation in Hard Rock by chiselling including removing the excavated materials upto a distance of 50 metres beyond the building area and lift as specified, stacking and spreading as directed including dewatering unless provided elsewhere, |
| 3 | Item No.3:- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and beddingincluding bailing out water, Steel centering, formwork,laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finelywashed etc) |
| 4 | Item No.4:- Providing laterite stone masonry in cement mortar 1:6 in Foundation and plinth including racking out joints where plastering is to be done watering and scaffolding complete. |
| 5 | Item No.5:- Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet,moulded or chamfered as per drawing or as directed including steelcentering, plywood/ steel formwork compacting, roughening them ifspecial finish is to be provided, finishing uneven and honeycombedsurface and curing etc. complete. The Cement Mortar 1:3 plaster isconsidered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, tarpaulinetc. (Wooden centering will not be allowed.) With fine aggregate(Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 6 | Item No.6A:- Filling in plinth and floors with approved excavated materials15 Cm. to 20 Cm. layers including watering and compaction complete.A) With Exca. Material |
| 7 | Item No.6B:- Filling in plinth and floors with Contractors materials in 15 Cm. to 20 Cm. layers including watering and compaction complete.A) With Exca. Material |
| 8 | Item No.7:-Providing soling using 80mm size trap metal in layer of 15cm each including filling voids with sand ramming watering etc. complete. |
| 9 | Item No.8:- Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete. |
| 10 | Item No.9:- Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows includingchamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x5mm with oil painting, etc. complete. |
| 11 | Item No.10:- Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. |
| 12 | Item No.11:- Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts,chromium plated fixtures and fastenings, with brass mortise lock,chromium plated handles on both sides, and finishing with FrenchPolish etc. complete. |
| 13 | Item No.12- Providing and fixing 30mm thick PVCDOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thicknessconsisting frame made out of M.S. tubes of 19 gauge thickness andsize of 19mm x 19mminserted inside the hollow section of stiles railstop ?and bottom rails and two 19x 19 mm MS tubes insertedhorizontally inside the hollow profile section using 4/5 mm sheetusing screws hollow profile shall be lipped with 10 mm (5mm x2) thickx 20 mm width on stiles and rails using solvent cement. The innerpanel shall be laminated with 5mm thick termite proof waterproofplain /prelam PVC sheet using solvent cement on the both sides of thepanel including stainless steel fixtures and fastening etc. Complete asper direction of Engineer incharge, manufacturers specification anddrawing. |
| 14 | Item No.13:- Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. andwindow frame bottom track section 61.85 x 31.75 x 1.20 mm atweight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mmat weight 0.417 kg/Rmt. As per detailed drawings and as directed byEngineer in charge with all necessary Aluminium sections fixtures andfastenings such as roller bearing in nylon casting and self locking catchfitted in vertical section of shutter including 5 mm thick plain glasswith all required screws and nuts etc, complete. With powder coatingwithout box |
| 15 | Item No.14:-Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, ofapproved quality etc. complete. |
| 16 | Item No.15:- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steelcentering, formwork, cover blocks, laying/pumping, compactionandroughening the surface if special finish is to be provided and curingetc. complete. (Excluding reinforcement and structural steel). withfully automatic micro processor based PLC with SCADA enabledreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand VSIGrade finely washed etc) |
| 17 | Item No.16:- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formedsurfaces with cement mortar 1:3 of sufficient minimum thickness togive a smooth and even surface or roughening if special finish is to beprovided and curing etc. complete,(Excluding reinforcement andstructural steel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) |
| 18 | Item No.17:- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if specialfinish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 19 | Item No.18:- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding withwires or tack welding and supporting as required complete. |
| 20 | Item No.19:- Providing internal cement plaster 12 mm thick in a single coat, in cement mortar 1:4 with neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing complete. |
| 21 | Item No.20:- Providing external cement plaster 12 mm thick in a single coat, in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing complete. |
| 22 | Item No 21-Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 23 | Item No. 22:- Providing and layingceramic tiles of IS Std.of approved quality 20 x 20 Cm.size for dado and skirting in required position with ready made adhesive morter of approved quality in required position after making the wall portion in level in plaster of cement morter 1:4 including joint filling with white colour cement slurry, cleaning, curring, complete. |
| 24 | Item No.23:- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections withoutconnecting plates, braces etc. and including one coat of anticorrosivepaint and over it two coats of oil painting of approved quality andshade etc. complete. |
| 25 | Item No.24:-Providing and fixing 6.00 mm thick ISI mark Asbestos Cement Corrugated sheet roofing including galvanised iron \"J\" or \"L\" hook bolts galvanised iron band bituminous G.I. washers, galvanised iron clamps, bolts, nuts and scaffolding etc. complete. |
| 26 | Item No.25:-Providing and fixing 6 mm thick ISI mark Asbestos Cement ridge capping for roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts, nuts including scaffolding etc. complete. |
| 27 | Item No.26:- Providing and fixing mild steel grill work for windows, ventilators, etc.15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oilpainting complete. |
| 28 | Item No 27:- Providing and applying oil bound Distemper of approved colour, shade and quality to old/new surfacesin , includingscaffolding,preparingthesurfaces(including primercoat)complete. |
| 29 | Item No.29:- Providing and applying one coat of seal cement primer of approved manufacture and shedincluding scaffolding preparing the surface by cleaning dirt and other foreign matters,scrapping if necessary including scaffolding etc. complete. |
| 30 | Item No.29:- Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick batlime concrete bedding without flushing tank and its accessories etc.complete. |
| 31 | Item No.30:- Providing and fixing steel sink of size40x30x25 cm including all connection of GI supply and UPVC waste pipe and trap upto outside face of wall cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug |
| 32 | Item No.31:- Providing and fixing white glazed earthenware Wash Hand Basin of 45 cm x 30cm size including cold water pillar tap / cold and hot water pillar tap brackets, rubber blugs and brass chain, stop tap and necessary pipe connection including P.V.C |
| 33 | Item No.32- Providing and fixing 100 mm dia. waste water & soil pipe UPVC/SOIL/VENT/WASTE/SWR pipe of required diameter confirming to IS -13592 and IS -4985 to withstand continous internal hydraulic pressure of 4 kg/cm2 including necessary fixture |
| 34 | Item No.33 - Providing, Conveying & hoisting and fixing in position high density polythin UV stabilised confirming to IS 12701, Water storage tank with necessary connection, testing etc.complete (Prior approval of sample and brand by Executive Engineer |
| 35 | Item No.34- Providinf and fixing Ultra voilet stabilised PVC plumbing pipes of 15 mm specified outer diameter of required Standard thickness confirming to IS 4985 including necessary fittings confirming to IS 7834 such as PVC bends vees reducers clamps plugs |
| 36 | Item No.35:-Providing & fixing 15mm dia screw down bib/stop tap of brass of approved quality and make including necessary sockets, union nut, testing etc. complete |
| 37 | Item No.36:-Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of20 mm thick one side polished kadappa with facia patti of 20 x 50 mmkadappa including all material labour cutting fixing with cementmortar and araldite curing polished and cleaning etc. complete. |
| 38 | Item No.37:- Providing and constructing Brick Masonry Inspection chamber60x45 cmand 45 to 90 cm in depth including 1:4:8 cementconcretefoundation,1:2:4cementconcrete channels, brick masonry, plastering from inside and outside as required in cement mortar 1:3 and airtight RCC lid with framefixed in cement concrete 1:2:4, curing, testing etc. complete. |
| 39 | Item No.39:- Providing and fixing 25 mm thick marble tablet of size and description as per detailed drawings including moulded marble 1:2 cement mortar border. |
| 40 | Item No.40:- Testing Of Material etc complate |
| 41 | G S T 12% .......... |
AI Tender Summary
Tender Timeline
Apr 09, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedApr 16, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 17, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender