Public Administrative Department Government Departments Closing in 0 days TDR #27632157

Supply Of Material Testing Equipments At Sicop Testing Centre Zainakote Srinagar

Issued by Government Departments · ZAINAKOTE SRINAGAR, Jammu And Kashmir

Tender Value

Ref. Documents

Estimated cost

Bid Submission

19 Apr 2021

0 days left

EMD

4 Lakhs

Bank guarantee accepted

Document Fee

3000

Non-refundable

Tender Type

Online

Tender Overview

Organization

Click here to view tendering authority

Tender ID

Click here to view tender id

Competition Type

NCB

Bidding Type

Tender

Location / State

ZAINAKOTE SRINAGAR → Jammu And Kashmir

EMD Exemption

Not Available

Quantity

Not Available

Website

Click here to view website

Contact Person

Click here to view contact person

Address

Click here to view address

Project Description

Supply Of Material Testing Equipments At Sicop Testing Centre Zainakote Srinagar - 2 Universal Testing Machine Upto 2000Kn ( Lc-0.05Kn / 0.1Kn ) Fully Automatic Computerised 3 Tensile Testing Machine Electronics Drive C Upto 2000Kn ( Lc-0.01Kn ) Computerized- Conversion Kit To Be Attached With Existing Comp. Testing Machine ( Ctm ) Fully Automatic Computerised 4 Extenso Meter 0-10Mm ( 0.001Mm ) 5 Impact Testing Machine Charpy And0-300J ( 2J ) 0-168J ( 2J ) 6 Vernier Caliper N0-150 Mm ( 0.02 Mm ) 7 Vernier Caliper N0-300 Mm ( 0.02 Mm ) 8 Vernier Caliper ( Dial ) N0-300 Mm ( 0.02 Mm ) 9 Vernier Caliper N0-600 Mm ( 0.02 Mm ) 10 Vernier Caliper N0-1000 Mm ( 0.02 Mm ) 11 Micrometer ( Flat End ) N0-25 Mm ( 0.01 Mm ) 12 Micrometer ( Ball End ) N0-25 Mm ( 0.01 Mm ) 13 Micrometer ( Flat & Ball End ) N0-25 Mm ( 0.01 Mm ) 14 Micrometer ( Pointed End ) N0-25 Mm ( 0.01 Mm ) 15 Pistal Caliper ( Ball End ) N0-50 Mm ( 0.1Mm ) 16 Bevel Angle Protector N0-3600 ( 5 Sec. Min ) 17 Height Gauge N0-300 Mm ( 0.01 Mm ) 18 Puppy Dial Indicator N0-0.8 Mm ( 0.01 Mm ) 19 Dialcaliper N0-10 Mm ( 0.05 Mm ) 20 Steel Scale N0-300Mm ( 0.5 / 1Mm ) 21 Steel Scale N0-1000Mm ( 0.5 / 1Mm ) 22 Measuring Tape N0-3 Mtr ( 1Mm ) 23 Measuring Tape N0-5 Mtr ( 1Mm ) 24 Feeler Gauge-26 Flap N0.3-1.0 Mm 25 Radius Gauge N1.0-7.0 Mm 26 Radius Gauge N7.5-15.0 Mm 27 Radius Gauge N15.5-25 Mm 28 Thread Pitch Gauge Nupto 10 Mm 29 Thread Plug Gauge ( 1 / 2 ) Bspt Iso 7 N15mm 30 Thread Plug Gauge ( 3 / 4 ) Bspt Iso 7 N20mm 31 Thread Plug Gauge ( 1 ) Bspt Iso 7 N25mm 32 Thread Plug Gauge ( 1-1 / 4 ) Bspt Iso 7 N32mm 33 Thread Plug Gauge ( 1-1 / 2 ) Bspt Iso 7 N40 Mm 34 Thread Plug Gauge ( 2 ) Bspt Iso 7 N50mm 35 Thread Plug Gauge ( 2-1 / 2 ) Bspt Iso 7 N65 Mm 36 Thread Plug Gauge ( 3 ) Bspt Iso 7 N80mm 37 Thread Plug Gauge ( 4 ) Bspt Iso 7 N100 Mm 38 Thread Plug Gauge ( 5 ) Bspt Iso 7 N125 Mm 39 Thread Plug Gauge ( 6 ) Bspt Iso 7 N150 Mm 40 Thread Ring Gauge ( 1 / 2 ) Bspt Iso 7 N15mm 41 Thread Ring Gauge ( 3 / 4 ) Bspt Iso 7 N20mm 42 Thread Ring Gauge ( 1 ) Bspt Iso 7 N25 Mm 43 Thread Ring Gauge ( 1-1 / 4 ) Bspt Iso 7 N32mm 44 Thread Ring Gauge ( 1-1 / 2 ) Bspt Iso 7 N40 Mm 45 Thread Ring Gauge ( 2 ) Bspt Iso 7 N50 Mm 46 Thread Ring Gauge ( 2-1 / 2 ) Bspt Iso 7 N65mm 47 Thread Ring Gauge ( 3’ ) Bspt Iso 7 N80 Mm 48 Thread Ring Gauge ( 4 ) Bspt Iso 7 N100 Mm 49 Thread Ring Gauge ( 5 ) Bspt Iso 7 N125 Mm 50 Thread Ring Gauge ( 6 ) Bspt Iso 7 N150 Mm 51 Electronic Balance N0-30 Kg ( 1Gm ) 52 Electronic Balance N0-100 Kg ( 10 Gm ) 53 Surface Plate ( Granite ) N1000 X 1500 Mm 54 Dry & Wet Bulb Thermometer N0-50 Deg C ( 1 Deg.C ) 55 Room Humidity Controller & Sensor N20-95% Rh ( 1Rh ) 0-100 56 Straight Edge N150 X25 X10 Mm 57 Straight Edge N1500 X90 X18 Mm 58 Try Square N500 X 500 X10 Mm 59 Magnetic V-Blocks N100 Mm 60 Bend Testing Machine N15 Mm To 50 Mm 61 Magnifying Glass N0150 Mm 62 Spirit Level N300 Mm 63 Water Bath For Re-Bend Of Tmt N0-450 Deg. C 64 Mandrels For Drift Test Of Sockets N15 Mm To 150 Mm 65 Guided Bend Test Arrangement And Mandrels For Pipe Strips, Plate Etc. Nupto 75 Mm 66 Bench Vice N6 Inch 67 Dead Weight For Calibration Of Balance N1gm-100Gm, 5Kg, 10Kg, 20 Kg 68 Power Hacksaw N24 69 Lathe Machine N6 / 8 70 Bench Grinder N1 Hp 71 Hand Grinder N4 72 Drilling Machine Nupto 40 Mm 73 Arc Welding N5 Kva 74 Bend Rebend Testing Machine For Upto 7Mm With Mandrels 75 Mandrels For Bend & Rebend Tmt Upto 250Mm 76 Providing Ring / Load Cell For Internal 500Kn 1000Kn Calibration Of Compression / Tmt / Ut 2000Kn 77 Co2 Gas Cutting 78 Wrapping Testing Machine Fully Automatic Computerised 79 Item:Chemical Spectro Lab 80 Spectro Meter Fe Base Existing 81 Carbon Analyzer With Tube Furnace And Temperature Indicator 82 Muffle Furnace With Controller 0-1200Degc.C ( 1Deg.C ) 83 Thermometer N0-500C / 10C 84 Electronics Balance N0-220 Gm / 0.0001G 85 Weight Box With Certificate N1mg-200Gm 86 Muffle Furnace With Controller N0-1200Degc.C ( 1Deg.C ) 87 Hot Air Over N14-14 88 Dry Or Wet Thermometer N0-50 Deg.C ( 1Degc ) 89 Barometer N660-880 ( 1Mm Hg ) 90 Thermo Meter N0-110 Deg.C ( 1Deg.C ) 91 Thermo Meter N0-360 Deg.C ( 1 Deg.C ) 92 Volumetric Flask N250 Ml 93 Volumetric Flask N500 Ml 94 Volumetric Flask N1000 Ml 95 Volumetric Flask N2000 Ml 96 Measuring Cylinder N10-50 Ml ( 2Ml ) 97 Measuring Cylinder N10-100Ml ( 1Ml ) 98 Measuring Cylinder N50-500Ml ( 5Ml ) 99 Burette N0-50 Ml ( 0.1Ml ) 100 Hot Plate N0-400 Deg.C ( 1Deg.C ) 101 Distillation Apparatus N0-4 Ltr 102 Magnetic Apparatus 103 Vol.Pipette N10ml 104 Desiccators Vaccum Plain All Clear N12 105 Desiccators N6 106 Hydrometer N1000-2000 107 Hydrometer N0.7000-1.000 108 Silica Crucible N25 / 50 / 100Ml 109 Gooch Crucible G4 N50ml 110 Nickel Crucible N50ml 111 Desccators N12 112 Test Sieve 75 Micron 113 Test Sieve 150 Micron 114 Test Sieve 300 Micron 115 Test Sieve 212 Micron 116 Ph Meter 4-12 117 Platinum Crucible With Lid 25Ml ( Weight=25G Ms ) 118 Item:Cement Lab 119 Vernier Caliper ( Digital ) N0-150 Mm ( 0.01 Mm ) 120 Electronic Balance N0-100 Gm ( 0.001 Gm ) 121 Electronic Balance N0-600G ( 0.01Gm ) 122 Electronic Balance N0-6000Gm ( 0.05Gm ) 123 Stop Watch N0-15 Min. 0.1 Sec 124 Dry & Wet Bulb Thermometer N0-50 Deg C ( 1Deg.C ) 125 Water Bath, Size: 13X12X7 N0-100Deg.C Low Temp 126 Room Humidity Controller & Sensor N20-95% Rh ( 1Rh ) 127 Serological Water Bath With Digital Indicator 13*12*7 N0-100 Deg.C 1Deg C Low Temp 128 Compression Testing Machine Computerized 0-2000Kn ( 0.1Kn ) 129 Humidity Chamber, 24X24 X24 20-95% Rh ( 1Rh ) Hot And Cold 130 Serological Water Bath With Digital 0-100 Deg.C Nindicator, 13 X12 X7 ( 1 Deg.C, Low Temp N 131 Mortar Vibration Machine 12000Rpm 132 Pan And Lead 45 Cm Dia 133 Pan And Lead 20 Cm Dia 134 Sieve 20Cm X 425 Micron 135 Sieve 20Cm Dia X 1.70 Micron 136 Sieve 20Cm Dia X 4.75 Micron 137 Sieve 20Cm Dia X 10Mm 138 Sieve Shaker, Motorized 20 Cm & 30Cm 139 Le-Chatelier Flask 1-24Ml ( 0.1Ml ) 140 Measuring Cylinder 0-250Ml 1Ml 141 Blaiens Air Permeability Apparatus 142 Vicat Apparatus With All Attachments 143 Shrinkage Bar Mould, Four Compartm25x25x282mm Nwith Smooth Reference Point N 144 Cube Mould 70.6X70.6X70.6Mm 145 Cube Mould 100X100x100mm 146 Cube Mould 150X150x150mm 147 Cube Mould 225X225x225mm 148 Le-Chatelier Mould 149 Pan Concreate Mixer 40 Kg 150 Gauging Trowel 200Mm Long 151 Pycnometer 152 Aggregate Impact Tester 153 Crushing Value Apparatus 154 Los Angeles Abrasion Testing Machi With Counter 155 Vibrating Table Size 24 X24 156 Cylindrical Metal Measures 3, 15& 30 Litres 157 Thickness Gauge 158 Length Gauge 159 Spectrophotometer 160 Transformer Oil Tester 161 Automatic Share Testing 162 Wood And Timber Testing Machine ( Digital ) Fully Automatic Computerised 163 Izod Impact Tester 164 Epoxy Coating Tester 165 Gold Scope Testing Machine Fully Automatic Computerised 166 Soil Tester 167 Insulation Tester 168 Multimeter Water Testing Machine Fully Automatic Computerised 169 Universal Strength Tester ( Textile ) Fully Automatic Computerised 170 Apple Moisture Tester 171 Digital Moisture Meter For Both Food / Grain 172 Paper Testing Machine Fully Automatic Computerised 173 Cross Hatch Cutter Kit 174 Cost Of Providing & Fixing Of Cables Through Lan Connecting The Major Testing Equipments, Supported Through Computer To Master Computer 175 Supply / Fixing Of 1 No. Master Computer With All Accessories Ups, Backup Batteries, Printer For Lan System Supported By Software Uploaded For Each Major Testing Equipments. 176 Metal Cutter 177 Electro-Mechanical Panel Bending Testing Machines Fully Automatic Computerised 178 Spun Pipe Testing Machine Nthree Edge Bearing Machine Fully Automatic Computerised 179 Electronic Milk Tester 180 Saffron Testing Machine Nsaffron Moisture Analysis Fully Automatic Computerised 181 Coaltesting Machine Fully Automatic Computerised 182 Galvanometer 183 Hot Plate 184 Kelvin Bridge Meter 185 Laboratory Furnace 186 Torsion Testing Machine Fully Automatic Computerised 187 Radiographic Testing ( Welding X-Ray ) Fully Automatic 188 Viscosity Meter 189 Tile Flaxural Testing Machine Fully Automatic Computerised 190 Tile Abrasion Testing Machine Fully Automatic Computerised 191 Ceramic Tile Strenght Machine Fully Automatic Computerised 192 Digital Bitmumin Testing Machine Fully Automatic Computerised 193 Digital Zinc Plating Thickness Tester 194 Paper Gsm Testing Machine 195 Paper Tensile Strength Tester Fully Automatic Computerised 196 Furniture And Component Testing Machines 197 Foam Density Tester Fully Automatic Computerised

BOQ

Name of Work : Supply , Installation & Maintenance of Testing Centre SICOP Zainakote Srinagar.
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	ITEMS : MECHANICAL LAB
2	1.01	Universal Testing Machine upto 2000kN (LC-0.05kN/0.1kN) Fully Automatic computerised		1	Nos
3	1.02	Tensile Testing Machine Electronics Drive C upto 2000kN (LC-0.01kN) Computerized- Conversion kit to be attached with existing comp. Testing machine (CTM) Fully Automatic computerised		1	Nos
4	1.03	Extenso Meter 0-10mm(0.001mm)		1	Nos
5	1.04	Impact Testing Machine Charpy and0-300J(2J)0-168J(2J)		1	Nos
6	1.05	Vernier Caliper\n0-150 mm(0.02 mm)		1	Nos
7	1.06	Vernier Caliper\n0-300 mm(0.02 mm)		1	Nos
8	1.07	Vernier Caliper ( Dial)\n0-300 mm(0.02 mm)		1	Nos
9	1.08	Vernier Caliper\n0-600 mm(0.02 mm)		1	Nos
10	1.09	Vernier Caliper\n0-1000 mm(0.02 mm)		1	Nos
11	1.1	Micrometer ( Flat End)\n0-25 mm(0.01 mm)		1	Nos
12	1.11	Micrometer ( Ball End)\n0-25 mm (0.01 mm)		1	Nos
13	1.12	Micrometer ( Flat & Ball End)\n0-25 mm(0.01 mm)		1	Nos
14	1.13	Micrometer ( pointed End)\n0-25 mm(0.01 mm)		1	Nos
15	1.14	Pistal Caliper ( Ball End)\n0-50 mm(0.1mm)		1	Nos
16	1.15	Bevel Angle Protector\n0-3600( 5 Sec. Min)		1	Nos
17	1.16	Height Gauge\n0-300 mm(0.01 mm)		1	Nos
18	1.17	Puppy Dial Indicator\n0-0.8 mm(0.01 mm)		1	Nos
19	1.18	DialCaliper\n0-10 mm( 0.05 mm)		1	Nos
20	1.19	Steel scale\n0-300mm( 0.5/1mm)		1	Nos
21	1.2	Steel Scale\n0-1000mm(0.5/1mm)		1	Nos
22	1.21	Measuring Tape\n0-3 Mtr ( 1mm)		1	Nos
23	1.22	Measuring Tape\n0-5 Mtr( 1mm)		1	Nos
24	1.23	Feeler Gauge-26 Flap\n0.3-1.0 mm		1	Nos
25	1.24	Radius Gauge\n1.0-7.0 mm		1	Nos
26	1.25	Radius Gauge\n7.5-15.0 mm		1	Nos
27	1.26	Radius Gauge\n15.5-25 mm		1	Nos
28	1.27	Thread Pitch Gauge\nUpto 10 mm		1	Nos
29	1.28	Thread Plug Gauge (1/2\") BSPT ISO 7\n15mm		1	Nos
30	1.29	Thread Plug Gauge (3/4') BSPT ISO 7\n20mm		1	Nos
31	1.3	Thread Plug Gauge ( 1\") BSPT ISO 7\n25mm		1	Nos
32	1.31	Thread Plug Gauge ( 1-1/4\") BSPT ISO 7\n32mm		1	Nos
33	1.32	Thread Plug Gauge ( 1-1/2\") BSPT ISO 7\n40 mm		1	Nos
34	1.33	Thread Plug Gauge (2\") BSPT ISO 7\n50mm		1	Nos
35	1.34	Thread Plug Gauge (2-1/2\") BSPT ISO 7\n65 mm		1	Nos
36	1.35	Thread Plug Gauge(3\") BSPT ISO 7\n80mm		1	Nos
37	1.36	Thread Plug Gauge (4\") BSPT ISO 7\n100 mm		1	Nos
38	1.37	Thread Plug Gauge(5\") BSPT ISO 7\n125 mm		1	Nos
39	1.38	Thread Plug Gauge (6\") BSPT ISO 7\n150 mm		1	Nos
40	1.39	Thread Ring Gauge (1/2\") BSPT ISO 7\n15mm		1	Nos
41	1.4	Thread Ring Gauge (3/4\") BSPT ISO 7\n20mm		1	Nos
42	1.41	Thread Ring Gauge (1\") BSPT ISO 7\n25 mm		1	Nos
43	1.42	Thread Ring Gauge (1-1/4\") BSPT ISO 7\n32mm		1	Nos
44	1.43	Thread Ring Gauge (1-1/2\") BSPT ISO 7\n40 mm		1	Nos
45	1.44	Thread Ring Gauge (2\") BSPT ISO 7\n50 mm		1	Nos
46	1.45	Thread Ring Gauge (2-1/2\") BSPT ISO 7\n65mm		1	Nos
47	1.46	Thread Ring Gauge(3’') BSPT ISO 7\n80 mm		1	Nos
48	1.47	Thread Ring Gauge (4\") BSPT ISO 7\n100 mm		1	Nos
49	1.48	Thread Ring Gauge(5\") BSPT ISO 7\n125 mm		1	Nos
50	1.49	Thread Ring Gauge (6\") BSPT ISO 7\n150 mm		1	Nos
51	1.5	Electronic Balance\n0-30 Kg ( 1gm)		1	Nos
52	1.51	Electronic Balance\n0-100 Kg ( 10 gm)		1	Nos
53	1.52	Surface Plate ( Granite)\n1000 x 1500 mm		1	Nos
54	1.53	Dry & Wet Bulb Thermometer\n0-50 deg C ( 1 deg.C)		1	Nos
55	1.54	Room Humidity Controller & Sensor\n20-95% RH (1RH)0-100		1	Nos
56	1.55	Straight Edge\n150 x25 x10 mm		1	Nos
57	1.56	Straight Edge\n1500 x90 x18 mm		1	Nos
58	1.57	Try Square\n500 x 500 x10 mm		1	Nos
59	1.58	Magnetic V-Blocks\n100 mm		2	Nos
60	1.59	Bend Testing Machine\n15 mm to 50 mm		1	Nos
61	1.6	Magnifying Glass\n0150 mm		1	Nos
62	1.61	Spirit Level\n300 mm		1	Nos
63	1.62	Water Bath for Re-Bend of TMT\n0-450 deg. C		1	Nos
64	1.63	Mandrels for Drift Test of Sockets\n15 mm to 150 mm		1	Nos
65	1.64	Guided Bend Test arrangement and mandrels for pipe strips, plate etc.\nUpto 75 mm		1	Nos
66	1.65	Bench Vice\n6 Inch		1	Nos
67	1.66	Dead Weight for Calibration of balance\n1gm-100gm,5kg,10kg,20 kg		1	Nos
68	1.67	Power Hacksaw\n24\"		1	Nos
69	1.68	Lathe Machine\n6'/8'		1	Nos
70	1.69	Bench Grinder\n1 HP		1	Nos
71	1.7	Hand Grinder\n4\"		1	Nos
72	1.71	Drilling Machine\nUpto 40 mm		1	Nos
73	1.72	Arc Welding\n5 KVA		1	Nos
74	1.73	Bend Rebend Testing Machine for upto 7mm with mandrels		1	Nos
75	1.74	Mandrels for Bend & Rebend TMT upto 250mm		1	Nos
76	1.75	Providing Ring / Load cell for internal 500kN 1000kN calibration of compression /TMT /UT 2000kN		1	Nos
77	1.76	CO2 Gas Cutting		1	Nos
78	1.77	Wrapping testing machine Fully Automatic computerised		1	Nos
79	2	ITEM:CHEMICAL SPECTRO LAB
80	2.01	Spectro Meter Fe Base EXISTING		1	Nos
81	2.02	Carbon Analyzer With tube Furnace and Temperature Indicator		1	Nos
82	2.03	Muffle Furnace with Controller 0-1200Degc.C(1Deg.C)		1	Nos
83	2.04	Thermometer\n0-500C /10C		1	Nos
84	2.05	Electronics Balance\n0-220 gm/0.0001g		1	Nos
85	2.06	Weight Box With Certificate\n1mg-200gm		1	Nos
86	2.07	Muffle Furnace with Controller\n0-1200Degc.C(1Deg.C)		2	Nos
87	2.08	Hot Air Over\n14\"-14\"		1	Nos
88	2.09	Dry or Wet Thermometer\n0-50 Deg.C(1DegC)		2	Nos
89	2.1	Barometer\n660-880( 1mm Hg)		1	Nos
90	2.11	Thermo Meter\n0-110 Deg.C (1Deg.C)		2	Nos
91	2.12	Thermo Meter\n0-360 Deg.C(1 Deg.C)		2	Nos
92	2.13	Volumetric Flask\n250 ml		6	Nos
93	2.14	Volumetric Flask\n500 ml		6	Nos
94	2.15	Volumetric Flask\n1000 ml		6	Nos
95	2.16	Volumetric Flask\n2000 ml		6	Nos
96	2.17	Measuring Cylinder\n10-50 ml(2ml)		6	Nos
97	2.18	Measuring Cylinder\n10-100ml(1ml)		6	Nos
98	2.19	Measuring Cylinder\n50-500ml(5ml)		6	Nos
99	2.2	Burette\n0-50 ml(0.1ml)		6	Nos
100	2.21	Hot Plate\n0-400 Deg.C(1Deg.C)		1	Nos
101	2.22	Distillation Apparatus\n0-4 LTR		1	Nos
102	2.23	Magnetic Apparatus		1	Nos
103	2.24	Vol.Pipette\n10ml		3	Nos
104	2.25	Desiccators Vaccum Plain All Clear\n12\"		1	Nos
105	2.26	Desiccators\n6\"		1	Nos
106	2.27	Hydrometer\n1000-2000		1	Nos
107	2.28	Hydrometer\n0.7000-1.000		1	Nos
108	2.29	Silica Crucible\n25/50/100ml		1	Nos
109	2.3	Gooch Crucible G4\n50ml		1	Nos
110	2.31	Nickel Crucible\n50ml		1	Nos
111	2.32	Desccators\n12\"		1	Nos
112	2.33	Test Sieve 75 Micron		1	Nos
113	2.34	Test Sieve 150 Micron		3	Nos
114	2.35	Test Sieve 300 Micron		1	Nos
115	2.36	Test Sieve 212 Micron		1	Nos
116	2.37	pH Meter 4-12		1	Nos
117	2.38	Platinum Crucible with Lid 25ml(weight=25g ms)		1	Nos
118	3	ITEM:CEMENT LAB
119	3.01	Vernier Caliper ( Digital)\n0-150 mm(0.01 mm)		1	Nos
120	3.02	Electronic Balance\n0-100 gm(0.001 gm)		1	Nos
121	3.03	Electronic Balance\n0-600g (0.01gm)		1	Nos
122	3.04	Electronic Balance\n0-6000gm(0.05gm)		1	Nos
123	3.05	Stop Watch\n0-15 min. 0.1 Sec		1	Nos
124	3.06	Dry & Wet Bulb Thermometer\n0-50 Deg C(1Deg.C)		1	Nos
125	3.07	Water bath,Size: 13\"X12\"x7\"\n0-100Deg.C Low Temp		1	Nos
126	3.08	Room Humidity Controller & Sensor\n20-95% RH(1RH)		1	Nos
127	3.09	Serological water Bath with Digital Indicator 13127\n0-100 Deg.C 1Deg C Low temp		1	Nos
128	3.1	Compression Testing Machine Computerized 0-2000kN(0.1kN)		1	Nos
129	3.11	Humidity Chamber,24\"X24\" X24\" 20-95% RH (1RH) Hot and Cold		1	Nos
130	3.12	Serological water Bath with Digital 0-100 Deg.C\nIndicator, 13\" X12\" X7\" (1 Deg.C,Low Temp\n		1	Nos
131	3.13	Mortar Vibration Machine 12000RPM	12000RPM	1	Nos
132	3.14	Pan and Lead 45 cm dia		1	Nos
133	3.15	Pan and Lead 20 cm dia		1	Nos
134	3.16	Sieve 20cm X 425 micron		1	Nos
135	3.17	Sieve 20cm dia X 1.70 micron		1	Nos
136	3.18	Sieve 20cm dia X 4.75 micron		1	Nos
137	3.19	Sieve 20cm dia X 10mm		1	Nos
138	3.2	Sieve Shaker,Motorized 20 cm & 30cm		1	Nos
139	3.21	Le-Chatelier Flask 1-24ml(0.1ml)		1	Nos
140	3.22	Measuring Cylinder 0-250ml 1ml		1	Nos
141	3.23	Blaien's Air permeability Apparatus		1	Nos
142	3.24	Vicat Apparatus with all attachments		1	Nos
143	3.25	Shrinkage Bar Mould,four compartm25x25x282mm\nwith smooth reference point\n		1	Nos
144	3.26	Cube Mould 70.6x70.6x70.6mm		1	Nos
145	3.27	Cube Mould 100x100x100mm		1	Nos
146	3.28	Cube Mould 150X150X150mm		1	Nos
147	3.29	Cube Mould 225x225x225mm		1	Nos
148	3.3	Le-Chatelier Mould		1	Nos
149	3.31	Pan Concreate Mixer 40 Kg		1	Nos
150	3.32	Gauging Trowel 200mm long		1	Nos
151	3.33	Pycnometer		1	Nos
152	3.34	Aggregate Impact tester		1	Nos
153	3.35	Crushing Value Apparatus		1	Nos
154	3.36	Los Angeles Abrasion testing machi with Counter		1	Nos
155	3.37	Vibrating Table Size 24\" X24\"		1	Nos
156	3.38	Cylindrical Metal Measures 3,15& 30 Litres		1	Nos
157	3.39	Thickness Gauge		1	Nos
158	3.4	Length Gauge		1	Nos
159	3.41	Spectrophotometer		1	Nos
160	3.42	TRANSFORMER OIL TESTER		1	Nos
161	3.43	AUTOMATIC SHARE TESTING		1	Nos
162	3.44	WOOD AND TIMBER TESTING MACHINE(DIGITAL) Fully Automatic computerised		1	Nos
163	3.45	IZOD IMPACT TESTER		1	Nos
164	3.46	EPOXY COATING TESTER		1	Nos
165	3.47	GOLD SCOPE TESTING MACHINE Fully Automatic computerised		1	Nos
166	3.48	SOIL TESTER		1	Nos
167	3.49	INSULATION TESTER		1	Nos
168	3.5	MULTIMETER WATER TESTING MACHINE Fully Automatic computerised		1	Nos
169	3.51	UNIVERSAL STRENGTH TESTER (TEXTILE) Fully Automatic computerised		1	Nos
170	3.52	APPLE MOISTURE TESTER		1	Nos
171	3.53	DIGITAL MOISTURE METER FOR BOTH FOOD /GRAIN		1	Nos
172	3.54	PAPER TESTING MACHINE Fully Automatic computerised		1	Nos
173	3.55	CROSS HATCH CUTTER KIT		1	Nos
174	3.56	Cost of providing & fixing of cables through LAN connecting the major testing equipments, supported through Computer to Master Computer		1	Nos
175	3.57	Supply/ Fixing of 1 No. Master Computer with all accessories UPS, Backup Batteries, Printer for LAN system supported by software uploaded for each major testing equipments.		1	Nos
176	3.58	METAL CUTTER		1	Nos
177	3.59	ELECTRO-MECHANICAL PANEL BENDING TESTING MACHINES Fully Automatic computerised		1	Nos
178	3.6	SPUN PIPE TESTING MACHINE \nThree edge bearing machine Fully Automatic computerised		1	Nos
179	3.61	ELECTRONIC MILK TESTER		1	Nos
180	3.62	SAFFRON TESTING MACHINE \nSaffron moisture analysis Fully Automatic computerised		1	Nos
181	3.63	COALTESTING MACHINE Fully Automatic computerised		1	Nos
182	3.64	GALVANOMETER		1	Nos
183	3.65	HOT PLATE		1	Nos
184	3.66	KELVIN BRIDGE METER		1	Nos
185	3.67	LABORATORY FURNACE		1	Nos
186	3.68	TORSION TESTING MACHINE Fully Automatic computerised		1	Nos
187	3.69	RADIOGRAPHIC TESTING(WELDING X-RAY) Fully Automatic		1	Nos
188	3.7	VISCOSITY METER		1	Nos
189	3.71	TILE FLAXURAL TESTING MACHINE Fully Automatic computerised		1	Nos
190	3.72	TILE ABRASION TESTING MACHINE Fully Automatic computerised		1	Nos
191	3.73	CERAMIC TILE STRENGHT MACHINE Fully Automatic computerised		1	Nos
192	3.74	DIGITAL BITMUMIN TESTING MACHINE Fully Automatic computerised		1	Nos
193	3.75	Digital Zinc Plating thickness tester		1	Nos
194	3.76	Paper gsm testing machine		1	Nos
195	3.77	Paper tensile strength tester Fully automatic computerised		1	Nos
196	3.78	FURNITURE AND COMPONENT TESTING MACHINES		1	Nos
197	3.79	FOAM DENSITY TESTER Fully Automatic computerised		1	Nos

AI Tender Summary

OUR REF NO 27632157

AUTHORITY Government Departments

TENDER VALUE Ref. Documents

LAST DATE 19-04-2021

Authority

Authority Name Small Scale Industries Development Corp. Ltd.

Work Description Supply Of Material Testing Equipments At Sicop Testing Centre Zainakote Srinagar - 2 Universal Testing Machine Upto 2000Kn ( Lc-0.05Kn / 0.1Kn ) Fully Automatic Computerised 3 Tensile Testing Machine Electronics Drive C Upto 2000Kn ( Lc-0.01Kn ) Computerized- Conversion Kit To Be Attached With Existing Comp. Testing Machine ( Ctm ) Fully Automatic Computerised 4 Extenso Meter 0-10Mm ( 0.001Mm ) 5 Impact Testing Machine Charpy And0-300J ( 2J ) 0-168J ( 2J ) 6 Vernier Caliper N0-150 Mm ( 0.02 Mm ) 7 Vernier Caliper N0-300 Mm ( 0.02 Mm ) 8 Vernier Caliper ( Dial ) N0-300 Mm ( 0.02 Mm ) 9 Vernier Caliper N0-600 Mm ( 0.02 Mm ) 10 Vernier Caliper N0-1000 Mm ( 0.02 Mm ) 11 Micrometer ( Flat End ) N0-25 Mm ( 0.01 Mm ) 12 Micrometer ( Ball End ) N0-25 Mm ( 0.01 Mm ) 13 Micrometer ( Flat & Ball End ) N0-25 Mm ( 0.01 Mm ) 14 Micrometer ( Pointed End ) N0-25 Mm ( 0.01 Mm ) 15 Pistal Caliper ( Ball End ) N0-50 Mm ( 0.1Mm ) 16 Bevel Angle Protector N0-3600 ( 5 Sec. Min ) 17 Height Gauge N0-300 Mm ( 0.01 Mm ) 18 Puppy Dial Indicator N0-0.8 Mm ( 0.01 Mm ) 19 Dialcaliper N0-10 Mm ( 0.05 Mm ) 20 Steel Scale N0-300Mm ( 0.5 / 1Mm ) 21 Steel Scale N0-1000Mm ( 0.5 / 1Mm ) 22 Measuring Tape N0-3 Mtr ( 1Mm ) 23 Measuring Tape N0-5 Mtr ( 1Mm ) 24 Feeler Gauge-26 Flap N0.3-1.0 Mm 25 Radius Gauge N1.0-7.0 Mm 26 Radius Gauge N7.5-15.0 Mm 27 Radius Gauge N15.5-25 Mm 28 Thread Pitch Gauge Nupto 10 Mm 29 Thread Plug Gauge ( 1 / 2 ) Bspt Iso 7 N15mm 30 Thread Plug Gauge ( 3 / 4 ) Bspt Iso 7 N20mm 31 Thread Plug Gauge ( 1 ) Bspt Iso 7 N25mm 32 Thread Plug Gauge ( 1-1 / 4 ) Bspt Iso 7 N32mm 33 Thread Plug Gauge ( 1-1 / 2 ) Bspt Iso 7 N40 Mm 34 Thread Plug Gauge ( 2 ) Bspt Iso 7 N50mm 35 Thread Plug Gauge ( 2-1 / 2 ) Bspt Iso 7 N65 Mm 36 Thread Plug Gauge ( 3 ) Bspt Iso 7 N80mm 37 Thread Plug Gauge ( 4 ) Bspt Iso 7 N100 Mm 38 Thread Plug Gauge ( 5 ) Bspt Iso 7 N125 Mm 39 Thread Plug Gauge ( 6 ) Bspt Iso 7 N150 Mm 40 Thread Ring Gauge ( 1 / 2 ) Bspt Iso 7 N15mm 41 Thread Ring Gauge ( 3 / 4 ) Bspt Iso 7 N20mm 42 Thread Ring Gauge ( 1 ) Bspt Iso 7 N25 Mm 43 Thread Ring Gauge ( 1-1 / 4 ) Bspt Iso 7 N32mm 44 Thread Ring Gauge ( 1-1 / 2 ) Bspt Iso 7 N40 Mm 45 Thread Ring Gauge ( 2 ) Bspt Iso 7 N50 Mm 46 Thread Ring Gauge ( 2-1 / 2 ) Bspt Iso 7 N65mm 47 Thread Ring Gauge ( 3’ ) Bspt Iso 7 N80 Mm 48 Thread Ring Gauge ( 4 ) Bspt Iso 7 N100 Mm 49 Thread Ring Gauge ( 5 ) Bspt Iso 7 N125 Mm 50 Thread Ring Gauge ( 6 ) Bspt Iso 7 N150 Mm 51 Electronic Balance N0-30 Kg ( 1Gm ) 52 Electronic Balance N0-100 Kg ( 10 Gm ) 53 Surface Plate ( Granite ) N1000 X 1500 Mm 54 Dry & Wet Bulb Thermometer N0-50 Deg C ( 1 Deg.C ) 55 Room Humidity Controller & Sensor N20-95% Rh ( 1Rh ) 0-100 56 Straight Edge N150 X25 X10 Mm 57 Straight Edge N1500 X90 X18 Mm 58 Try Square N500 X 500 X10 Mm 59 Magnetic V-Blocks N100 Mm 60 Bend Testing Machine N15 Mm To 50 Mm 61 Magnifying Glass N0150 Mm 62 Spirit Level N300 Mm 63 Water Bath For Re-Bend Of Tmt N0-450 Deg. C 64 Mandrels For Drift Test Of Sockets N15 Mm To 150 Mm 65 Guided Bend Test Arrangement And Mandrels For Pipe Strips, Plate Etc. Nupto 75 Mm 66 Bench Vice N6 Inch 67 Dead Weight For Calibration Of Balance N1gm-100Gm, 5Kg, 10Kg, 20 Kg 68 Power Hacksaw N24 69 Lathe Machine N6 / 8 70 Bench Grinder N1 Hp 71 Hand Grinder N4 72 Drilling Machine Nupto 40 Mm 73 Arc Welding N5 Kva 74 Bend Rebend Testing Machine For Upto 7Mm With Mandrels 75 Mandrels For Bend & Rebend Tmt Upto 250Mm 76 Providing Ring / Load Cell For Internal 500Kn 1000Kn Calibration Of Compression / Tmt / Ut 2000Kn 77 Co2 Gas Cutting 78 Wrapping Testing Machine Fully Automatic Computerised 79 Item:Chemical Spectro Lab 80 Spectro Meter Fe Base Existing 81 Carbon Analyzer With Tube Furnace And Temperature Indicator 82 Muffle Furnace With Controller 0-1200Degc.C ( 1Deg.C ) 83 Thermometer N0-500C / 10C 84 Electronics Balance N0-220 Gm / 0.0001G 85 Weight Box With Certificate N1mg-200Gm 86 Muffle Furnace With Controller N0-1200Degc.C ( 1Deg.C ) 87 Hot Air Over N14-14 88 Dry Or Wet Thermometer N0-50 Deg.C ( 1Degc ) 89 Barometer N660-880 ( 1Mm Hg ) 90 Thermo Meter N0-110 Deg.C ( 1Deg.C ) 91 Thermo Meter N0-360 Deg.C ( 1 Deg.C ) 92 Volumetric Flask N250 Ml 93 Volumetric Flask N500 Ml 94 Volumetric Flask N1000 Ml 95 Volumetric Flask N2000 Ml 96 Measuring Cylinder N10-50 Ml ( 2Ml ) 97 Measuring Cylinder N10-100Ml ( 1Ml ) 98 Measuring Cylinder N50-500Ml ( 5Ml ) 99 Burette N0-50 Ml ( 0.1Ml ) 100 Hot Plate N0-400 Deg.C ( 1Deg.C ) 101 Distillation Apparatus N0-4 Ltr 102 Magnetic Apparatus 103 Vol.Pipette N10ml 104 Desiccators Vaccum Plain All Clear N12 105 Desiccators N6 106 Hydrometer N1000-2000 107 Hydrometer N0.7000-1.000 108 Silica Crucible N25 / 50 / 100Ml 109 Gooch Crucible G4 N50ml 110 Nickel Crucible N50ml 111 Desccators N12 112 Test Sieve 75 Micron 113 Test Sieve 150 Micron 114 Test Sieve 300 Micron 115 Test Sieve 212 Micron 116 Ph Meter 4-12 117 Platinum Crucible With Lid 25Ml ( Weight=25G Ms ) 118 Item:Cement Lab 119 Vernier Caliper ( Digital ) N0-150 Mm ( 0.01 Mm ) 120 Electronic Balance N0-100 Gm ( 0.001 Gm ) 121 Electronic Balance N0-600G ( 0.01Gm ) 122 Electronic Balance N0-6000Gm ( 0.05Gm ) 123 Stop Watch N0-15 Min. 0.1 Sec 124 Dry & Wet Bulb Thermometer N0-50 Deg C ( 1Deg.C ) 125 Water Bath, Size: 13X12X7 N0-100Deg.C Low Temp 126 Room Humidity Controller & Sensor N20-95% Rh ( 1Rh ) 127 Serological Water Bath With Digital Indicator 13*12*7 N0-100 Deg.C 1Deg C Low Temp 128 Compression Testing Machine Computerized 0-2000Kn ( 0.1Kn ) 129 Humidity Chamber, 24X24 X24 20-95% Rh ( 1Rh ) Hot And Cold 130 Serological Water Bath With Digital 0-100 Deg.C Nindicator, 13 X12 X7 ( 1 Deg.C, Low Temp N 131 Mortar Vibration Machine 12000Rpm 132 Pan And Lead 45 Cm Dia 133 Pan And Lead 20 Cm Dia 134 Sieve 20Cm X 425 Micron 135 Sieve 20Cm Dia X 1.70 Micron 136 Sieve 20Cm Dia X 4.75 Micron 137 Sieve 20Cm Dia X 10Mm 138 Sieve Shaker, Motorized 20 Cm & 30Cm 139 Le-Chatelier Flask 1-24Ml ( 0.1Ml ) 140 Measuring Cylinder 0-250Ml 1Ml 141 Blaiens Air Permeability Apparatus 142 Vicat Apparatus With All Attachments 143 Shrinkage Bar Mould, Four Compartm25x25x282mm Nwith Smooth Reference Point N 144 Cube Mould 70.6X70.6X70.6Mm 145 Cube Mould 100X100x100mm 146 Cube Mould 150X150x150mm 147 Cube Mould 225X225x225mm 148 Le-Chatelier Mould 149 Pan Concreate Mixer 40 Kg 150 Gauging Trowel 200Mm Long 151 Pycnometer 152 Aggregate Impact Tester 153 Crushing Value Apparatus 154 Los Angeles Abrasion Testing Machi With Counter 155 Vibrating Table Size 24 X24 156 Cylindrical Metal Measures 3, 15& 30 Litres 157 Thickness Gauge 158 Length Gauge 159 Spectrophotometer 160 Transformer Oil Tester 161 Automatic Share Testing 162 Wood And Timber Testing Machine ( Digital ) Fully Automatic Computerised 163 Izod Impact Tester 164 Epoxy Coating Tester 165 Gold Scope Testing Machine Fully Automatic Computerised 166 Soil Tester 167 Insulation Tester 168 Multimeter Water Testing Machine Fully Automatic Computerised 169 Universal Strength Tester ( Textile ) Fully Automatic Computerised 170 Apple Moisture Tester 171 Digital Moisture Meter For Both Food / Grain 172 Paper Testing Machine Fully Automatic Computerised 173 Cross Hatch Cutter Kit 174 Cost Of Providing & Fixing Of Cables Through Lan Connecting The Major Testing Equipments, Supported Through Computer To Master Computer 175 Supply / Fixing Of 1 No. Master Computer With All Accessories Ups, Backup Batteries, Printer For Lan System Supported By Software Uploaded For Each Major Testing Equipments. 176 Metal Cutter 177 Electro-Mechanical Panel Bending Testing Machines Fully Automatic Computerised 178 Spun Pipe Testing Machine Nthree Edge Bearing Machine Fully Automatic Computerised 179 Electronic Milk Tester 180 Saffron Testing Machine Nsaffron Moisture Analysis Fully Automatic Computerised 181 Coaltesting Machine Fully Automatic Computerised 182 Galvanometer 183 Hot Plate 184 Kelvin Bridge Meter 185 Laboratory Furnace 186 Torsion Testing Machine Fully Automatic Computerised 187 Radiographic Testing ( Welding X-Ray ) Fully Automatic 188 Viscosity Meter 189 Tile Flaxural Testing Machine Fully Automatic Computerised 190 Tile Abrasion Testing Machine Fully Automatic Computerised 191 Ceramic Tile Strenght Machine Fully Automatic Computerised 192 Digital Bitmumin Testing Machine Fully Automatic Computerised 193 Digital Zinc Plating Thickness Tester 194 Paper Gsm Testing Machine 195 Paper Tensile Strength Tester Fully Automatic Computerised 196 Furniture And Component Testing Machines 197 Foam Density Tester Fully Automatic Computerised

Basic Detail

Tender No 49aa-PES of 2021-22DATED 10 .04.2021

Bidding Type Tender

Location

City ZAINAKOTE SRINAGAR

State Jammu And Kashmir

Key Dates

Publish Date 10 Apr 2021

Submission Date 19 Apr 2021

Open Date 20 Apr 2021

Finance

Tender Value Ref. Documents

Tender Fee 3000

EMD 4 Lakhs

Exemption Not Available

Document List

49aaNSBDtestingmachine.pdf

05592AD1-9AC0-44BF-A7B8-FD503E167FF1.html

BOQ_236090.xls

Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free

Your details are secure and used only for document delivery.

Tender Timeline

Jan 01, 1900

11:30 IST

Tender Published

Tender notice published.

Completed

Apr 19, 2021

17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed

Apr 20, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓

pdf

49aaNSBDtestingmachine.pdf

html

05592AD1-9AC0-44BF-A7B8-FD503E167FF1.html

xls

BOQ_236090.xls

pdf

Tendernotice_1.pdf

Need Bidding Support?

Get end-to-end help with documentation, EMD, JV structuring & portal submission from our expert team.

Related Tender Results

View Also

Sharing tender

Government Departments Due: 2021-04-19T00:00:00

Recipient Email Address

The tender details will be sent to this email address.

TenderDetail

Loading tenders

Supply Of Material Testing Equipments At Sicop Testing Centre Zainakote Srinagar

Tender Overview

Project Description

BOQ

AI Tender Summary

Unlock Full AI Tender Summary

Tender Timeline

Tender Published

Bid Submission Deadline

Bid Opening Date

Tender Documents

49aaNSBDtestingmachine.pdf

05592AD1-9AC0-44BF-A7B8-FD503E167FF1.html

BOQ_236090.xls

Tendernotice_1.pdf

Request Analytics

Request Tender Document