Annual Rate Contract For Civil Maintenance Works At Iiim Institute , Residential Complex And Chatha Field Station , Jammu .
Tender Value
49.59 Lakhs
Estimated cost
Bid Submission
23 Apr 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
CSIR-IIIM, Jammu and Chatha Farm, Jammu → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Rate Contract For Civil Maintenance Works At Iiim Institute , Residential Complex And Chatha Field Station , Jammu .
BOQ
| Name of Work: Annual Rate Contract for Civil maintenance works at IIIM Institute, Residential Complex and Chatha field station, Jammu. (2020-21) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. \n | BI01010001010000000000000515BI0100001119 | ||
| 2 | 1.1 | All kinds of soil. | BI01010001010000000000000515BI0100001120 | 12 | Cum |
| 3 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | BI01010001010000000000000515BI0100001121 | 6 | Cum |
| 4 | 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.\n | BI01010001010000000000000515BI0100001122 | 6000 | sqm |
| 5 | 4 | Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) : | BI01010001010000000000000515BI0100001123 | ||
| 6 | 4.1 | Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : | BI01010001010000000000000515BI0100001124 | ||
| 7 | 4.2 | With Chlorpyriphos/Lindane E.C. 20% with 1% concentration | BI01010001010000000000000515BI0100001125 | 360 | Mtr |
| 8 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | BI01010001010000000000000515BI0100001126 | ||
| 9 | 5.1 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001127 | 8 | Cum |
| 10 | 5.2 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001128 | 6 | Cum |
| 11 | 5.3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001129 | 8 | Cum |
| 12 | 6 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth | BI01010001010000000000000515BI0100001130 | 120 | sqm |
| 13 | 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : | BI01010001010000000000000515BI0100001131 | ||
| 14 | 7.1 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001132 | 5 | Cum |
| 15 | 8 | Centering and shuttering including strutting, propping etc. and removal of form for : | BI01010001010000000000000515BI0100001133 | ||
| 16 | 8.1 | Foundations, footings, bases of columns, etc. for mass concrete. | BI01010001010000000000000515BI0100001134 | 5 | sqm |
| 17 | 8.2 | Lintels, beams, plinth beams, girders, bressumers and\ncantilevers | BI01010001010000000000000515BI0100001135 | 8 | sqm |
| 18 | 9 | Steel reinforcement for R.C.C. work ready to use \"cut and bend\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. | BI01010001010000000000000515BI0100001136 | ||
| 19 | 9.1 | Thermo-Mechanically Treated bars of grade Fe-500D or more. MISCELLANEOUS | BI01010001010000000000000515BI0100001137 | 60 | kg |
| 20 | 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: | BI01010001010000000000000515BI0100001138 | ||
| 21 | 10.1 | Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001139 | 5 | Cum |
| 22 | 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | BI01010001010000000000000515BI0100001140 | ||
| 23 | 11.1 | Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001141 | 8 | Cum |
| 24 | 12 | Repairing of brick / stone work with existing bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes : Cement mortar 1:6 ( 1 cement :6 Fine sand ) (Brick / stone shall be provided by deptt. Or existing brick shall be used) | BI01010001010000000000000515BI0100001142 | 18 | Cum |
| 25 | 13 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. | BI01010001010000000000000515BI0100001143 | ||
| 26 | 13.1 | cement mortar 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001144 | 12 | sqm |
| 27 | 14 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : | BI01010001010000000000000515BI0100001145 | ||
| 28 | 14.1 | Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001146 | 3 | Cum |
| 29 | 15 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. | BI01010001010000000000000515BI0100001147 | ||
| 30 | 15.1 | Granite of any colour and shade | BI01010001010000000000000515BI0100001148 | ||
| 31 | 15.2 | Area of slab up to 0.50 sqm | BI01010001010000000000000515BI0100001149 | 6 | sqm |
| 32 | 16 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | BI01010001010000000000000515BI0100001150 | ||
| 33 | 16.1 | Area of slab up to 0.50 sqm | BI01010001010000000000000515BI0100001151 | 18 | Mtr |
| 34 | 17 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. | BI01010001010000000000000515BI0100001152 | 90 | sqm |
| 35 | 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001153 | 36 | Sqm |
| 36 | 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). | BI01010001010000000000000515BI0100001154 | ||
| 37 | 19.1 | Sal wood | BI01010001010000000000000515BI0100001155 | 0.8 | Cum |
| 38 | 19.2 | Kiln seasoned and chemically treated hollock wood | BI01010001010000000000000515BI0100001156 | 1 | Cum |
| 39 | 20 | Repairing work in existing frames of doors, windows, cup board, clerestory windows and other frames, wrought framed and fixed in position : (Wood shall be supplied by department free of cost) | BI01010001010000000000000515BI0100001157 | 2.25 | Cum |
| 40 | 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : | BI01010001010000000000000515BI0100001158 | ||
| 41 | 21.1 | Kiln seasoned and chemically treated Hollock wood. | BI01010001010000000000000515BI0100001159 | 4 | sqm |
| 42 | 22 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. | BI01010001010000000000000515BI0100001160 | ||
| 43 | 22.1 | Kiln seasoned and chemically treated Hollock wood.: 30 mm thick | BI01010001010000000000000515BI0100001161 | 18 | sqm |
| 44 | 23 | Repairing and fixing in existing panelled or panelled and glazed shutters for doors, windows and clerestory windows including necessary screws etc complete. | BI01010001010000000000000515BI0100001162 | ||
| 45 | 23.1 | Wooden work | BI01010001010000000000000515BI0100001163 | 320 | Each |
| 46 | 23.2 | Aluminium work | BI01010001010000000000000515BI0100001164 | 60 | Each |
| 47 | 24 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : | BI01010001010000000000000515BI0100001165 | ||
| 48 | 24.1 | 4 mm thick | BI01010001010000000000000515BI0100001166 | 10 | sqm |
| 49 | 24.2 | 6 mm thick | BI01010001010000000000000515BI0100001167 | 12 | sqm |
| 50 | 24.3 | 12 mm thick | BI01010001010000000000000515BI0100001168 | 15 | sqm |
| 51 | 24.4 | 18 mm thick | BI01010001010000000000000515BI0100001169 | 24 | sqm |
| 52 | 25 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : | BI01010001010000000000000515BI0100001170 | ||
| 53 | 25.1 | 30 mm thick shutters | BI01010001010000000000000515BI0100001171 | ||
| 54 | 25.2 | with ISI marked M.S. pressed butt hinges bright finished of\nrequired size | BI01010001010000000000000515BI0100001172 | ||
| 55 | 25.3 | Kiln seasoned and chemically treated hollock wood | BI01010001010000000000000515BI0100001173 | 12 | sqm |
| 56 | 26 | Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gage with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. | BI01010001010000000000000515BI0100001174 | ||
| 57 | 26.1 | With 2nd class teak wood beading 62X19 mm. | BI01010001010000000000000515BI0100001175 | 52 | sqm |
| 58 | 27 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : | BI01010001010000000000000515BI0100001176 | ||
| 59 | 27.1 | 100x58x1.90 mm | BI01010001010000000000000515BI0100001177 | 20 | Each |
| 60 | 27.2 | 75x47x1.70 mm | BI01010001010000000000000515BI0100001178 | 40 | Each |
| 61 | 28 | Providing and fixing ISI marked oxidised M.S. single acting door spring with necessary screws etc. complete : | BI01010001010000000000000515BI0100001179 | ||
| 62 | 28.1 | 150 mm | BI01010001010000000000000515BI0100001180 | 25 | Each |
| 63 | 29 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : | BI01010001010000000000000515BI0100001181 | ||
| 64 | 29.1 | 250x16 mm | BI01010001010000000000000515BI0100001182 | 20 | Each |
| 65 | 30 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : | BI01010001010000000000000515BI0100001183 | ||
| 66 | 30.1 | 200x10 mm | BI01010001010000000000000515BI0100001184 | 20 | Each |
| 67 | 30.2 | 150x10 mm | BI01010001010000000000000515BI0100001185 | 40 | Each |
| 68 | 30.3 | 100x10 mm | BI01010001010000000000000515BI0100001186 | 36 | Each |
| 69 | 31 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : | BI01010001010000000000000515BI0100001187 | ||
| 70 | 31.1 | 125 mm | BI01010001010000000000000515BI0100001188 | 24 | Each |
| 71 | 31.2 | 75 mm | BI01010001010000000000000515BI0100001189 | 48 | Each |
| 72 | 32 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : | BI01010001010000000000000515BI0100001190 | ||
| 73 | 32.1 | 150 mm | BI01010001010000000000000515BI0100001191 | 12 | Each |
| 74 | 33 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | BI01010001010000000000000515BI0100001192 | 4 | Each |
| 75 | 34 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. | BI01010001010000000000000515BI0100001193 | ||
| 76 | 34.1 | 50 mm | BI01010001010000000000000515BI0100001194 | 60 | Each |
| 77 | 34.2 | 75 mm | BI01010001010000000000000515BI0100001195 | 20 | Each |
| 78 | 35 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed djustment with necessary accessories and screws etc. complete. | BI01010001010000000000000515BI0100001196 | 8 | Each |
| 79 | 36 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : | BI01010001010000000000000515BI0100001197 | ||
| 80 | 36.1 | 250x16 mm | BI01010001010000000000000515BI0100001198 | 8 | Each |
| 81 | 37 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : | BI01010001010000000000000515BI0100001199 | ||
| 82 | 37.1 | 200x10 mm | BI01010001010000000000000515BI0100001200 | 16 | Each |
| 83 | 37.2 | 100x10 mm | BI01010001010000000000000515BI0100001201 | 16 | Each |
| 84 | 38 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : | BI01010001010000000000000515BI0100001202 | ||
| 85 | 38.1 | 150/125 mm | BI01010001010000000000000515BI0100001203 | 16 | Each |
| 86 | 38.2 | 75 mm | BI01010001010000000000000515BI0100001204 | 10 | Each |
| 87 | 39 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. | BI01010001010000000000000515BI0100001205 | ||
| 88 | 39.1 | Twin rubber stopper | BI01010001010000000000000515BI0100001206 | 20 | Each |
| 89 | 40 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. | BI01010001010000000000000515BI0100001207 | 24 | Each |
| 90 | 41 | Providing and fixing PVC rigid foam sheet/ aluminium sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. | BI01010001010000000000000515BI0100001208 | 16 | sqm |
| 91 | 42 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. | BI01010001010000000000000515BI0100001209 | ||
| 92 | 42.1 | 1.0 mm thick | BI01010001010000000000000515BI0100001210 | 8 | sqm |
| 93 | 43 | Providing and fixing 8-10 mm thick PVC (type-1), for plain lining / PVC pannel on the wall surface with necessary screws, including all fitting and edge covering approved manufacture and quality colour as per the the direction of Engineer. | BI01010001010000000000000515BI0100001211 | 24 | sqm |
| 94 | 44 | Labour for Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ( Angle Iron, Iron flat, Welded meshetc. provided by departement free of cost) | BI01010001010000000000000515BI0100001212 | 650 | Kg |
| 95 | 45 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | BI01010001010000000000000515BI0100001213 | ||
| 96 | 45.1 | Hot finished welded type tubes | BI01010001010000000000000515BI0100001214 | 50 | Kg |
| 97 | 46 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | BI01010001010000000000000515BI0100001215 | ||
| 98 | 46.1 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | BI01010001010000000000000515BI0100001216 | 65 | Kg |
| 99 | 47 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | BI01010001010000000000000515BI0100001217 | 80 | Kg |
| 100 | 48 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. | BI01010001010000000000000515BI0100001218 | ||
| 101 | 48.1 | 40mm thick with 20mm nominal size stone aggregate. | BI01010001010000000000000515BI0100001219 | 120 | sqm |
| 102 | 49 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. | BI01010001010000000000000515BI0100001220 | ||
| 103 | 49.1 | 40 mm wide and 4 mm thick. | BI01010001010000000000000515BI0100001221 | 40 | Mtr |
| 104 | 50 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). | BI01010001010000000000000515BI0100001222 | ||
| 105 | 50.1 | Medium shade pigment using 50% white cement 50% Grey cement | BI01010001010000000000000515BI0100001223 | 4 | sqm |
| 106 | 51 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : | BI01010001010000000000000515BI0100001224 | ||
| 107 | 51.1 | 25 mm thick. | BI01010001010000000000000515BI0100001225 | 4 | sqm |
| 108 | 52 | Providing and laying Ceramic glazed floor tiles 300x300 mm Anti-Skid / matt finished (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) or cement based high polymer modified quick-set tile adhesive (water based) including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001226 | 30 | sqm |
| 109 | 53 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001227 | ||
| 110 | 53.1 | Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001228 | 20 | sqm |
| 111 | 54 | Providing and fixing applying high performance self leveling epoxy floor coating in 2 mm thickness of approved make/brand over one coat of epoxy primer over prepared surface by means of special spike rollers and other tools so as to removes all trapped air bubbles and achieve smooth glossy and leveled surface as desired by Engineer in- charge. It includes surface preparation: Remove the existing damages epoxy floor and epoxy coving, cleaning of surface free from dust, Dirt, moisture, oil & all foreign cleaning all mechanized equipments are to be used like grinding machine, scrubber, sanders not air blowers, vacuum cleaners, moisture test machine etc. Once, cleaned, the surface is roughened to prepare the surface for application of epoxy primer, filling of small cracks and unevenness with epoxy repairing putty. | BI01010001010000000000000515BI0100001229 | 8 | sqm |
| 112 | 55 | Fixing charge of Rectified digital Ceramic Wall tiles ( 1’x2; Feet) in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Tiles shall be provided by department). | BI01010001010000000000000515BI0100001230 | 24 | sqm |
| 113 | 56 | Fixing Charge of Rectified digital Ceramic Floor tiles (1’x1; Feet) with 20 mm thick bed of cement mortar 1:4(1 Cement: 4 coarse sand) and jointing/pointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Tiles shall be provided by department) | BI01010001010000000000000515BI0100001231 | 24 | sqm |
| 114 | 57 | Fixing Charge of vitrified floor tiles (2’x2'; Feet) with 20 mm thick bed of cement mortar 1:4(1 Cement: 4 coarse sand) and jointing/pointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Tiles shall be provided by department) | BI01010001010000000000000515BI0100001232 | 24 | sqm |
| 115 | 58 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | BI01010001010000000000000515BI0100001233 | ||
| 116 | 58.1 | In 75x75 mm deep chase | BI01010001010000000000000515BI0100001234 | 80 | Mtr |
| 117 | 59 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : | BI01010001010000000000000515BI0100001235 | ||
| 118 | 59.1 | White face insulating board | BI01010001010000000000000515BI0100001236 | ||
| 119 | 59.2 | 12 mm thick | BI01010001010000000000000515BI0100001237 | 20 | sqm |
| 120 | 60 | Providing and fixing on wall face un plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. | BI01010001010000000000000515BI0100001238 | ||
| 121 | 60.1 | 75 mm diameter | BI01010001010000000000000515BI0100001239 | 45 | Mtr |
| 122 | 60.2 | 110 mm diameter | BI01010001010000000000000515BI0100001240 | 60 | Mtr |
| 123 | 61 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. | BI01010001010000000000000515BI0100001241 | ||
| 124 | 61.1 | Bend 87.5° | BI01010001010000000000000515BI0100001242 | ||
| 125 | 61.2 | 75 mm bend | BI01010001010000000000000515BI0100001243 | 15 | Each |
| 126 | 61.3 | 110 mm bend | BI01010001010000000000000515BI0100001244 | 20 | Each |
| 127 | 62 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. | BI01010001010000000000000515BI0100001245 | ||
| 128 | 62.1 | 75 mm | BI01010001010000000000000515BI0100001246 | 15 | Each |
| 129 | 62.2 | 110 mm | BI01010001010000000000000515BI0100001247 | 20 | Each |
| 130 | 63 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : | BI01010001010000000000000515BI0100001248 | ||
| 131 | 63.1 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS\ncertification marks) | BI01010001010000000000000515BI0100001249 | 8 | sqm |
| 132 | 64 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. | BI01010001010000000000000515BI0100001250 | ||
| 133 | 64.1 | 2 mm thick flat | BI01010001010000000000000515BI0100001251 | 8 | sqm |
| 134 | 65 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001252 | 8 | sqm |
| 135 | 66 | Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. | BI01010001010000000000000515BI0100001253 | ||
| 136 | 66.1 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. | BI01010001010000000000000515BI0100001254 | 3 | sqm |
| 137 | 67 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. | BI01010001010000000000000515BI0100001255 | 6 | sqm |
| 138 | 68 | Providing and fixing PVC false ceiling of specified materials of size 10-12mm true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections of main \"T\" runner with suitably spaced joints to get required. Laying false ceiling PVC tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge | BI01010001010000000000000515BI0100001256 | 6 | sqm |
| 139 | 69 | 12 mm cement plaster of mix : | BI01010001010000000000000515BI0100001257 | ||
| 140 | 69.1 | 1:6 (1 cement: 6 fine sand) | BI01010001010000000000000515BI0100001258 | 600 | sqm |
| 141 | 70 | 12 mm cement plaster finished with a floating coat of neat cement of mix : | BI01010001010000000000000515BI0100001259 | ||
| 142 | 70.1 | 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001260 | 50 | sqm |
| 143 | 71 | White washing with lime to give an even shade: | BI01010001010000000000000515BI0100001261 | ||
| 144 | 71.1 | New work (three or more coats) | BI01010001010000000000000515BI0100001262 | 15 | sqm |
| 145 | 72 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade | BI01010001010000000000000515BI0100001263 | ||
| 146 | 72.1 | New work (two or more coats) over and including priming coat with cement primer. | BI01010001010000000000000515BI0100001264 | 60 | sqm |
| 147 | 73 | Applying one coat of water thinnable cement primer of approved brand\nand manufacture on wall surface : | BI01010001010000000000000515BI0100001265 | ||
| 148 | 73.1 | Water thinnable cement primer | BI01010001010000000000000515BI0100001266 | 80 | sqm |
| 149 | 74 | Finishing walls with water proofing cement paint of required shade : | BI01010001010000000000000515BI0100001267 | ||
| 150 | 74.1 | New work (Two or more coats applied @ 3.84 kg/10 sqm). | BI01010001010000000000000515BI0100001268 | 80 | sqm |
| 151 | 75 | Finishing walls with Premium Acrylic Smooth exterior paint with\nSilicone additives of required shade : | BI01010001010000000000000515BI0100001269 | ||
| 152 | 75.1 | New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | BI01010001010000000000000515BI0100001270 | 110 | sqm |
| 153 | 76 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | BI01010001010000000000000515BI0100001271 | ||
| 154 | 76.1 | Two or more coats on new work | BI01010001010000000000000515BI0100001272 | 60 | sqm |
| 155 | 77 | Lettering with black Japan paint of approved brand and manufacture | BI01010001010000000000000515BI0100001273 | 300 | Per Cm |
| 156 | 78 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001274 | 240 | sqm |
| 157 | 79 | White washing with lime to give an even shade: | BI01010001010000000000000515BI0100001275 | ||
| 158 | 79.1 | Old work (one or more coats) | BI01010001010000000000000515BI0100001276 | 48 | sqm |
| 159 | 80 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : | BI01010001010000000000000515BI0100001277 | ||
| 160 | 80.1 | Old work (atleast two coats) | BI01010001010000000000000515BI0100001278 | 11000 | sqm |
| 161 | 81 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001279 | 3000 | sqm |
| 162 | 82 | Wall painting with plastic emulsion paint of approved brand and and preparing the surface smooth including necessary repairs to scratches etc. complete manufacture to give an even shade : | BI01010001010000000000000515BI0100001280 | ||
| 163 | 82.1 | Old work (one or more coats) | BI01010001010000000000000515BI0100001281 | 200 | sqm |
| 164 | 83 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | BI01010001010000000000000515BI0100001282 | ||
| 165 | 83.1 | One or more coats on old work. | BI01010001010000000000000515BI0100001283 | 1060 | sqm |
| 166 | 84 | Polishing on wood work with ready made wax polish of approved brand and manufacture : | BI01010001010000000000000515BI0100001284 | ||
| 167 | 84.1 | old work. | BI01010001010000000000000515BI0100001285 | 24 | sqm |
| 168 | 85 | Finishing walls with water proofing cement paint of required shade and preparing the surface smooth including necessary repairs to scratches etc. complete | BI01010001010000000000000515BI0100001286 | ||
| 169 | 85.1 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | BI01010001010000000000000515BI0100001287 | 180 | sqm |
| 170 | 86 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade and preparing the surface smooth including necessary repairs to scratches etc. complete | BI01010001010000000000000515BI0100001288 | ||
| 171 | 86.1 | Old work (one or more coats applied @ 0.83 ltr/10 sqm). | BI01010001010000000000000515BI0100001289 | 340 | sqm |
| 172 | 87 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : | BI01010001010000000000000515BI0100001290 | ||
| 173 | 87.1 | With cement mortar 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001291 | 240 | sqm |
| 174 | 88 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: | BI01010001010000000000000515BI0100001292 | ||
| 175 | 88.1 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | BI01010001010000000000000515BI0100001293 | 30 | sqm |
| 176 | 88.2 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) | BI01010001010000000000000515BI0100001294 | 20 | sqm |
| 177 | 89 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001295 | 360 | sqm |
| 178 | 90 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. | BI01010001010000000000000515BI0100001296 | 80 | sqm |
| 179 | 91 | Cleaning and desilting of gully trap chamber,Manholes, W.C. Seat, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001297 | 300 | Each |
| 180 | 92 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm | BI01010001010000000000000515BI0100001298 | 480 | Mtr |
| 181 | 93 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. | BI01010001010000000000000515BI0100001299 | 10 | Each |
| 182 | 94 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. | BI01010001010000000000000515BI0100001300 | 135 | Each |
| 183 | 95 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : | BI01010001010000000000000515BI0100001301 | ||
| 184 | 95.1 | 3 mm thick | BI01010001010000000000000515BI0100001302 | 60 | sqm |
| 185 | 96 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | BI01010001010000000000000515BI0100001303 | ||
| 186 | 96.1 | Nominal concrete 1:3:6 or richer mix (i/c equivalent\ndesign mix) | BI01010001010000000000000515BI0100001304 | 10 | Cum |
| 187 | 97 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | BI01010001010000000000000515BI0100001305 | 1 | Cum |
| 188 | 98 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001306 | ||
| 189 | 98.1 | in cement mortar | BI01010001010000000000000515BI0100001307 | 5 | Cum |
| 190 | 99 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: | BI01010001010000000000000515BI0100001308 | ||
| 191 | 99.1 | Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001309 | 20 | Each |
| 192 | 100 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | BI01010001010000000000000515BI0100001310 | 110 | Kg |
| 193 | 101 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. | BI01010001010000000000000515BI0100001311 | ||
| 194 | 101.1 | For thickness of tiles 10 mm to 25 mm | BI01010001010000000000000515BI0100001312 | 30 | sqm |
| 195 | 102 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001313 | 400 | sqm |
| 196 | 103 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | BI01010001010000000000000515BI0100001314 | 60 | sqm |
| 197 | 104 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved up to 5 K.M. | BI01010001010000000000000515BI0100001315 | 120 | Cum |
| 198 | 105 | Labour for G. I barbed wire fencing with angle iron post placed at required distance embedded in cement concrete blocks, and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. Payment to be made per metre cost of total length of barbed wire used. (G.I. barbed wire fencing provided by departement free of cost) | BI01010001010000000000000515BI0100001316 | 500 | Mtr |
| 199 | 106 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. | BI01010001010000000000000515BI0100001317 | 60 | Kg |
| 200 | 107 | Labour for fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped of Engineer-in-charge, (Concertina coil fencing provided by departement free of cost) | BI01010001010000000000000515BI0100001318 | 120 | Mtr |
| 201 | 108 | Labour for fixing G.I. chain link fabric fencing (Made of G.I. wire of dia 4 mm) of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (G.I. chain link fabric fencing provided by departement free of cost) | BI01010001010000000000000515BI0100001319 | 30 | sqm |
| 202 | 109 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying ressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be easured for payment). | BI01010001010000000000000515BI0100001320 | ||
| 203 | 109.1 | Overhead informatory road signage | BI01010001010000000000000515BI0100001321 | 4.5 | sqm |
| 204 | 110 | Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost). | BI01010001010000000000000515BI0100001322 | 200 | sqm |
| 205 | 111 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : | BI01010001010000000000000515BI0100001323 | ||
| 206 | 111.1 | White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. | BI01010001010000000000000515BI0100001324 | 4 | Each |
| 207 | 112 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : | BI01010001010000000000000515BI0100001325 | ||
| 208 | 112.1 | W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001326 | 4 | Each |
| 209 | 113 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : | BI01010001010000000000000515BI0100001327 | ||
| 210 | 113.1 | Single half stall urinal with 5 litre P.V.C. automatic flushing\ncistern | BI01010001010000000000000515BI0100001328 | 1 | Each |
| 211 | 114 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : | BI01010001010000000000000515BI0100001329 | ||
| 212 | 114.1 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. | BI01010001010000000000000515BI0100001330 | 10 | Each |
| 213 | 114.2 | White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. | BI01010001010000000000000515BI0100001331 | 3 | Each |
| 214 | 115 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | BI01010001010000000000000515BI0100001332 | 8 | Each |
| 215 | 116 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : | BI01010001010000000000000515BI0100001333 | ||
| 216 | 116.1 | White glazed fire clay kitchen sink of size 600x450x250 mm. | BI01010001010000000000000515BI0100001334 | 8 | Each |
| 217 | 117 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. | BI01010001010000000000000515BI0100001335 | 8 | Each |
| 218 | 118 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | BI01010001010000000000000515BI0100001336 | 20 | Each |
| 219 | 119 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. | BI01010001010000000000000515BI0100001337 | ||
| 220 | 119.1 | 10 litre capacity - White | BI01010001010000000000000515BI0100001338 | 10 | Each |
| 221 | 120 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : | BI01010001010000000000000515BI0100001339 | ||
| 222 | 120.1 | White solid plastic seat with lid | BI01010001010000000000000515BI0100001340 | 10 | Each |
| 223 | 121 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. | BI01010001010000000000000515BI0100001341 | ||
| 224 | 121.1 | 15 mm nominal dia | BI01010001010000000000000515BI0100001342 | 2 | Each |
| 225 | 122 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. | BI01010001010000000000000515BI0100001343 | ||
| 226 | 122.1 | Semi rigid pipe | BI01010001010000000000000515BI0100001344 | ||
| 227 | 122.2 | 32 mm dia | BI01010001010000000000000515BI0100001345 | 140 | Each |
| 228 | 123 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001346 | 8 | Each |
| 229 | 124 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | BI01010001010000000000000515BI0100001347 | 8 | Each |
| 230 | 125 | Providing and fixing toilet paper holder : | BI01010001010000000000000515BI0100001348 | ||
| 231 | 125.1 | C. P. Brass | BI01010001010000000000000515BI0100001349 | 2 | Each |
| 232 | 126 | Providing and fixing soil, waste and vent pipes : | BI01010001010000000000000515BI0100001350 | ||
| 233 | 126.1 | 100 mm diameter | BI01010001010000000000000515BI0100001351 | ||
| 234 | 126.2 | Sand cast iron S&S pipe as per IS: 1729. | BI01010001010000000000000515BI0100001352 | 6 | Mtr |
| 235 | 126.3 | 75 mm diameter | BI01010001010000000000000515BI0100001353 | ||
| 236 | 126.4 | Sand cast iron S&S pipe as per IS: 1729. | BI01010001010000000000000515BI0100001354 | 4 | Mtr |
| 237 | 127 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : | BI01010001010000000000000515BI0100001355 | ||
| 238 | 127.1 | 75 mm dia pipe | BI01010001010000000000000515BI0100001356 | 4 | Each |
| 239 | 127.2 | 100 mm dia pipe | BI01010001010000000000000515BI0100001357 | 4 | Each |
| 240 | 128 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : | BI01010001010000000000000515BI0100001358 | ||
| 241 | 128.1 | For 100 mm dia. Pipe | BI01010001010000000000000515BI0100001359 | 6 | Each |
| 242 | 128.2 | For 75 mm dia. Pipe | BI01010001010000000000000515BI0100001360 | 5 | Each |
| 243 | 129 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. | BI01010001010000000000000515BI0100001361 | ||
| 244 | 129.1 | 100 mm diameter | BI01010001010000000000000515BI0100001362 | ||
| 245 | 129.2 | Sand cast iron S&S pipe as per IS: 1729. | BI01010001010000000000000515BI0100001363 | 2 | Each |
| 246 | 129.3 | 75 mm diameter | BI01010001010000000000000515BI0100001364 | ||
| 247 | 129.4 | Sand cast iron S&S pipe as per IS: 1729. | BI01010001010000000000000515BI0100001365 | 2 | Each |
| 248 | 130 | Providing and fixing plain bend of required degree. | BI01010001010000000000000515BI0100001366 | ||
| 249 | 130.1 | 100 mm diameter | BI01010001010000000000000515BI0100001367 | ||
| 250 | 130.2 | Sand cast iron S&S pipe as per IS: 1729. | BI01010001010000000000000515BI0100001368 | 3 | Each |
| 251 | 130.3 | 75 mm diameter | BI01010001010000000000000515BI0100001369 | ||
| 252 | 130.4 | Sand cast iron S&S pipe as per IS: 1729. | BI01010001010000000000000515BI0100001370 | 3 | Each |
| 253 | 131 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: | BI01010001010000000000000515BI0100001371 | ||
| 254 | 131.1 | 100 mm dia pipe | BI01010001010000000000000515BI0100001372 | 6 | Each |
| 255 | 131.2 | 75 mm dia pipe | BI01010001010000000000000515BI0100001373 | 4 | Each |
| 256 | 132 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. | BI01010001010000000000000515BI0100001374 | ||
| 257 | 132.1 | Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms | BI01010001010000000000000515BI0100001375 | 23 | Each |
| 258 | 133 | Providing and fixing towel rail complete with brackets fixed to wooden cleats with C.P. brass screws.C.P. brass towel rail with two C.P. brass brackets.600x20 mm size | BI01010001010000000000000515BI0100001376 | 12 | Each |
| 259 | 134 | Repairing/ refixing of towel rail, glass/PVC self, PVC cistern mirror, jet, all sanitary fitting etc.complete with brackets fixed to wooden cleats with C.P. brass screws. (existing materials shall be used or supplied by department free of cost) | BI01010001010000000000000515BI0100001377 | 60 | Each |
| 260 | 135 | Repairing/ refixing of wash basin, sink, gyser, all sanitary fitting etc. complete with brackets fixed to wooden cleats with Nut & bolts.(existing materials shall be used or supplied by department free of cost) | BI01010001010000000000000515BI0100001378 | 36 | Each |
| 261 | 136 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.\nExternal work | BI01010001010000000000000515BI0100001379 | ||
| 262 | 136.1 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001380 | 36 | Mtr |
| 263 | 136.2 | 20 mm dia. nominal bore | BI01010001010000000000000515BI0100001381 | 24 | Mtr |
| 264 | 136.3 | 25 mm dia. nominal bore | BI01010001010000000000000515BI0100001382 | 12 | Mtr |
| 265 | 137 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.\nExternal work | BI01010001010000000000000515BI0100001383 | ||
| 266 | 137.1 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001384 | 110 | Mtr |
| 267 | 137.2 | 20 mm dia. nominal bore | BI01010001010000000000000515BI0100001385 | 40 | Mtr |
| 268 | 137.3 | 25 mm dia. nominal bore | BI01010001010000000000000515BI0100001386 | 15 | Mtr |
| 269 | 137.4 | 40 mm dia. nominal bore | BI01010001010000000000000515BI0100001387 | 4 | Mtr |
| 270 | 137.5 | 50 mm dia. nominal bore | BI01010001010000000000000515BI0100001388 | 2 | Mtr |
| 271 | 138 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : | BI01010001010000000000000515BI0100001389 | ||
| 272 | 138.1 | 25 to 40 mm nominal bore | BI01010001010000000000000515BI0100001390 | 2 | Each |
| 273 | 139 | Providing and fixing brass bib cock of approved quality : | BI01010001010000000000000515BI0100001391 | ||
| 274 | 139.1 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001392 | 150 | Each |
| 275 | 140 | Providing and fixing brass stop cock of approved quality | BI01010001010000000000000515BI0100001393 | ||
| 276 | 140.1 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001394 | 45 | Each |
| 277 | 140.2 | 20 mm dia. nominal bore | BI01010001010000000000000515BI0100001395 | 10 | Each |
| 278 | 141 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete \n | BI01010001010000000000000515BI0100001396 | ||
| 279 | 141.1 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001397 | 4 | Each |
| 280 | 141.2 | 20 mm dia. nominal bore | BI01010001010000000000000515BI0100001398 | 4 | Each |
| 281 | 141.3 | 25 mm dia. nominal bore | BI01010001010000000000000515BI0100001399 | 2 | Each |
| 282 | 142 | Providing and fixing uplasticised PVC connection pipe with brass unions : | BI01010001010000000000000515BI0100001400 | ||
| 283 | 142.1 | 45 cm length | BI01010001010000000000000515BI0100001401 | ||
| 284 | 142.2 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001402 | 80 | Each |
| 285 | 143 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : | BI01010001010000000000000515BI0100001403 | ||
| 286 | 143.1 | 150 mm diameter | BI01010001010000000000000515BI0100001404 | 15 | Each |
| 287 | 144 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : | BI01010001010000000000000515BI0100001405 | ||
| 288 | 144.1 | With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001406 | 6 | Each |
| 289 | 145 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) \n | BI01010001010000000000000515BI0100001407 | ||
| 290 | 145.1 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001408 | 12 | Each |
| 291 | 145.2 | 20 mm dia. nominal bore | BI01010001010000000000000515BI0100001409 | 8 | Each |
| 292 | 145.3 | 25 mm dia. nominal bore | BI01010001010000000000000515BI0100001410 | 3 | Each |
| 293 | 145.4 | 40 mm dia. nominal bore | BI01010001010000000000000515BI0100001411 | 2 | Each |
| 294 | 145.5 | 50 mm dia. nominal bore | BI01010001010000000000000515BI0100001412 | 2 | Each |
| 295 | 146 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (only sintax make) | BI01010001010000000000000515BI0100001413 | 2000 | Per Lit. |
| 296 | 147 | Providing and fixing C.P. brass bib cock / pillar cock of approved quality conforming to IS:8931 | BI01010001010000000000000515BI0100001414 | ||
| 297 | 147.1 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001415 | 40 | Each |
| 298 | 148 | Repairing and fixing C.P. brass bib cock /stop cock/ Angle valve/ Ball cock/ pillar cock including necessary PVC washer screws etc as required :15 mm dia. nominal bore | BI01010001010000000000000515BI0100001416 | 400 | Each |
| 299 | 149 | Fixing charge of C.P. brass bib cock /stop cock/ Angle valve/ Ball cock/ pillar cock, Paper holder, Tower ring, soap dish, shelf etc. including necessary PVC washer screws etc as required. (All sanitary fitting shall be provide by Department) | BI01010001010000000000000515BI0100001417 | 24 | Each |
| 300 | 150 | Providing and and fixing of brass phase of stander desigh and approved make in existing Angle valve/ pillar cock as required :15 mm dia. nominal bore | BI01010001010000000000000515BI0100001418 | 135 | Each |
| 301 | 151 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. | BI01010001010000000000000515BI0100001419 | ||
| 302 | 151.1 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001420 | 20 | Each |
| 303 | 152 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. \n | BI01010001010000000000000515BI0100001421 | ||
| 304 | 152.1 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001422 | 4 | Each |
| 305 | 153 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore | BI01010001010000000000000515BI0100001423 | ||
| 306 | 153.1 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001424 | 30 | Each |
| 307 | 154 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. | BI01010001010000000000000515BI0100001425 | 30 | Mtr |
| 308 | 155 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes or PVC pipe including bed concrete as per standard design: | BI01010001010000000000000515BI0100001426 | ||
| 309 | 155.1 | 100 mm diameter | BI01010001010000000000000515BI0100001427 | 10 | Mtr |
| 310 | 155.2 | 150 mm diameter | BI01010001010000000000000515BI0100001428 | 6 | Mtr |
| 311 | 156 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : | BI01010001010000000000000515BI0100001429 | ||
| 312 | 156.1 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : | BI01010001010000000000000515BI0100001430 | ||
| 313 | 156.2 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001431 | 2 | Each |
| 314 | 157 | Supplying and fixing C.I. cover without frame for manholes: | BI01010001010000000000000515BI0100001432 | ||
| 315 | 157.1 | 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. | BI01010001010000000000000515BI0100001433 | 3 | Each |
| 316 | 158 | Providing and fixing in position pre-cast R.C.C. manhole cover andframe of required shape and approved quality LD - 2.5 | BI01010001010000000000000515BI0100001434 | ||
| 317 | 158.1 | Rectangular shape 600x450 mm internal dimensions | BI01010001010000000000000515BI0100001435 | 15 | Each |
| 318 | 159 | Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : | BI01010001010000000000000515BI0100001436 | ||
| 319 | 159.1 | Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5 | BI01010001010000000000000515BI0100001437 | 8 | Each |
| 320 | 160 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of ngineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | BI01010001010000000000000515BI0100001438 | ||
| 321 | 160.1 | For fixed portion | BI01010001010000000000000515BI0100001439 | ||
| 322 | 160.2 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | BI01010001010000000000000515BI0100001440 | 30 | Kg |
| 323 | 161 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | BI01010001010000000000000515BI0100001441 | ||
| 324 | 161.1 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | BI01010001010000000000000515BI0100001442 | 24 | Kg |
| 325 | 162 | For fixing of charge for existing aluminium work for doors , windows, ventilators and partitions with extruded built up including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required PVC / neopren felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling , C.P. brass/ stainless steel screws , all complete as per architectural drawings and the directions of Engineer in - charge . (Materials will be provided department) | BI01010001010000000000000515BI0100001443 | ||
| 326 | 162.1 | Only labour Charge | BI01010001010000000000000515BI0100001444 | 36 | Sqm |
| 327 | 163 | For labour charge for existing For shutters of doors , windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/ neoprene gasket reqired architectural drawings and the directions of Engineer in - charge . (glass & board shall be paid for separately) | BI01010001010000000000000515BI0100001445 | ||
| 328 | 163.1 | Only labour Charge | BI01010001010000000000000515BI0100001446 | 12 | Nos. |
| 329 | 164 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | BI01010001010000000000000515BI0100001447 | ||
| 330 | 164.1 | Pre-laminated particle board with decorative lamination on both sides | BI01010001010000000000000515BI0100001448 | 6 | Sqm |
| 331 | 165 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | BI01010001010000000000000515BI0100001449 | ||
| 332 | 165.1 | With float glass panes of 5.50 mm thickness | BI01010001010000000000000515BI0100001450 | 8 | Sqm |
| 333 | 166 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001451 | ||
| 334 | 166.1 | With stainless steel cover plate minimum 1.25 mm thickness | BI01010001010000000000000515BI0100001452 | 20 | Each |
| 335 | 167 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. | BI01010001010000000000000515BI0100001453 | ||
| 336 | 167.1 | Upto 5mm depth and 5 mm width | BI01010001010000000000000515BI0100001454 | 80 | Mtr |
| 337 | 168 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | BI01010001010000000000000515BI0100001455 | 40 | Each |
| 338 | 169 | Grading roof for water proofing treatment with | BI01010001010000000000000515BI0100001456 | ||
| 339 | 169.1 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded\nstone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001457 | 6 | Cum |
| 340 | 169.2 | Cement mortar 1:4 (1cement : 4 coarse sand) | BI01010001010000000000000515BI0100001458 | 8 | Cum |
| 341 | 170 | Providing & fixing, all complete as per specification and the direction of Engineer in-charge. | BI01010001010000000000000515BI0100001459 | ||
| 342 | 170.01 | CP Grating 100mm dia | BI01010001010000000000000515BI0100001460 | 50 | Each |
| 343 | 170.02 | Tgangular Type PVC cabinet self three layer foe bathroom (45 CM x 12 CM) | BI01010001010000000000000515BI0100001461 | 40 | Each |
| 344 | 170.03 | Door seal with 1\" aluminium strip and brusher including fitting | BI01010001010000000000000515BI0100001462 | 60 | Mtr |
| 345 | 170.04 | CP Hand Shwer | BI01010001010000000000000515BI0100001463 | 10 | Each |
| 346 | 170.05 | CP Waste Coupling , 32 mm | BI01010001010000000000000515BI0100001464 | 5 | Each |
| 347 | 170.06 | PVC self, 450x120x5 mm | BI01010001010000000000000515BI0100001465 | 5 | Each |
| 348 | 170.07 | PVC Pipe, 40mm | BI01010001010000000000000515BI0100001466 | 4 | Mtr |
| 349 | 170.08 | PVC Pipe, 50mm | BI01010001010000000000000515BI0100001467 | 6 | Mtr |
| 350 | 170.09 | CP Cup 1/2\" | BI01010001010000000000000515BI0100001468 | 10 | Each |
| 351 | 170.1 | CP Ext. Nipple 1/2\"-1\"-2\" | BI01010001010000000000000515BI0100001469 | 6 | Each |
| 352 | 170.11 | CP Rod complete, 18\" | BI01010001010000000000000515BI0100001470 | 4 | Each |
| 353 | 170.12 | CP Bottle Trap, 32 mm | BI01010001010000000000000515BI0100001471 | 3 | Each |
| 354 | 170.13 | Brass Ball cock 1/2\" | BI01010001010000000000000515BI0100001472 | 20 | Each |
| 355 | 170.14 | Brass Ball cock 3/4\" | BI01010001010000000000000515BI0100001473 | 12 | Each |
| 356 | 170.15 | Brass Ball cock 1\" | BI01010001010000000000000515BI0100001474 | 6 | Each |
| 357 | 170.16 | G I Tank Nipple 20mm dia | BI01010001010000000000000515BI0100001475 | 12 | Each |
| 358 | 171 | Basic Rates of Hire charge & Mdays. | BI01010001010000000000000515BI0100001476 | ||
| 359 | 171.1 | Tractor with trolley. | BI01010001010000000000000515BI0100001477 | 2 | Day |
| 360 | 171.2 | Mobile crane | BI01010001010000000000000515BI0100001478 | 5 | Day |
| 361 | 171.3 | Hydraulic Excavator (3D)/JCV with driver and fuel. 8000/8= per day1000 | BI01010001010000000000000515BI0100001479 | 60 | Hrs. |
| 362 | 171.4 | Hire and running charges of Mechanical sewer compressor pump machine 6000/8= per day 750 | BI01010001010000000000000515BI0100001480 | 36 | Hrs. |
| 363 | 171.5 | Skilled Labour (average) (Mason/Carpenter/plumber/) | BI01010001010000000000000515BI0100001481 | 60 | Day |
| 364 | 171.6 | Unskilled labour (Beldar/mate/colie) | BI01010001010000000000000515BI0100001482 | 700 | Day |
AI Tender Summary
Tender Timeline
Apr 09, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedApr 23, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 26, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender