Providing Toilet And Bathroom And Miscellaneous Civil Works In Existing Canteen Building To Accommodate Tripura Security Forces At Rani Atari Ug Mine In Chirimiri Area .
Tender Value
4.46 Lakhs
Estimated cost
Bid Submission
17 Apr 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chirimiri → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Toilet And Bathroom And Miscellaneous Civil Works In Existing Canteen Building To Accommodate Tripura Security Forces At Rani Atari Ug Mine In Chirimiri Area .
BOQ
| Name of the Work / Contract No: | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 1 | 68.4 | Cum |
| 2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size). | 2 | 4.9 | Cum |
| 3 | 3 | Brick work with Flyash bricks of class designation 35 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | 3 | 21.62 | Cum |
| 4 | 4 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² | 4 | 42 | Sqm |
| 5 | 5 | 12 mm thick cement plaster of mix 1 : 6 ( 1Cement : 6 fine sand | 5 | 136.4 | Sqm |
| 6 | 6 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in all colours, shades, except White, Ivory, Rey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4(1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. | 6 | 15.6 | Cum |
| 7 | 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | 7 | 44.6 | Cum |
| 8 | 8 | Providing and fixing on face unplasticised PVC rain water pipes Confirming to IS 13592 Type A including jointing with seal ring Confirming to IS 5392 leaving 10 mm gap for thermal expansion single soaked pipes 110 mm dia | 8 | 20 | M |
| 9 | 9 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 25 mm dia. nominal bore | 9 | 50 | M |
| 10 | 10 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the wall tec internal work exposed on wall 15 dia wall etc. | 10 | 50 | M |
| 11 | 11 | Providing and placing on terrnce (at all floor levels) ployethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipess but without fittings and base support for tank. per | 11 | 2000 | Liter |
| 12 | 12 | Providing and fixing white vitrous chine Water closet squatting pan Orissa pattern WC pan size 580 x 440 | 12 | 3 | Each |
| 13 | 13 | White washing with lime to give an even shade new work three or more coats | 13 | 200 | Sqm |
| 14 | 14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work two or more coats over and including water thinable priming coats with cement primer | 14 | 200 | Sqm |
| 15 | 15 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mmwidth out of which 50mm shall be flat and 20mm shall be tapered in 45degreeangle on both side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel.10 mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm(5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification & drawing . 30 mm thick plain PVC door shutters. | 15 | 8.77 | Sqm |
| 16 | 16 | Brick work with fly ash bricks of class designation 35 in superstructure above plinth level up to floor five level in all shapes and size in cement mortor 1 :6 ( 1 Cement : 6 Coarse sand ) | 16 | 5.6 | Cum |
| 17 | 17 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | 17 | 40 | Kg |
| 18 | 18 | Total impact of GST for the purpose of CTC | 18 | 1 | Nos |
AI Tender Summary
Tender Timeline
Apr 07, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedApr 17, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 19, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender