Military Engineer Services-MES has published Provision Of Signal Equipment Stores Of 626 Sata Bty And Certain Other Sanctioned Works Under Age B/R-Ii Of Ge Sukna. Submission Date for this Tender is 29-04-2021. Foundry Machines and Equipments Tenders in Sukna West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Apr-2021 | CorrigendumBOQandTender | BOQ | 22-04-2021 |
| 2 | 22-Apr-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-04-2021 |
| Name of Work : PROVN OF SIGNAL EQPT STORES OF 626 SATA BTY AND CERTAIN OTHER SANCTIONED WORKS UNDER AGE B/R-II OF GE SUKNA | |||||
|---|---|---|---|---|---|
| Sl. No. | TEXT # | Item Code / Make | Quantity | Units | |
| 1 | 1 | BOQ Part-I (B/R Work) | |||
| 2 | 1.01 | Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.\n | 235 | Sqm | |
| 3 | 1.02 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.\n | 63 | Cum | |
| 4 | 1.03 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed.\n | 12 | Each | |
| 5 | 1.04 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.\n | 31 | Cum | |
| 6 | 1.05 | Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.\n | 32 | Cum | |
| 7 | 1.06 | M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.\n | 20 | Cum | |
| 8 | 1.07 | M&L RCC 1:1.5:3 Type A1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.\n | 14 | Cum | |
| 9 | 1.08 | M&L RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) in beams cantilevers, bressummers lintels over 1.5m span complete all as specified and directed.\n | 4 | Cum | |
| 10 | 1.09 | M&L RCC 1:1.5:3 Type A1 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.\n | 8 | Cum | |
| 11 | 1.1 | M&L RCC 1:1.5:3 type A-1 (using 20 mm graded crushed stone aggregate) in chajja complete all as specified and directed.\n | 1 | Cum | |
| 12 | 1.11 | Demolition of brick work or stone / boulder masonry, built in cement mortar and including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.\n | 3 | Cum | |
| 13 | 1.12 | M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.\n | 75 | Cum | |
| 14 | 1.13 | M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos. 8 mm dia TMT bars in full length of wall at every fourth course complete all as specified and directed.\n | 135 | Sqm | |
| 15 | 1.14 | Use and Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.\n | 30 | Sqm | |
| 16 | 1.15 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed.\n | 30 | Sqm | |
| 17 | 1.16 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal in plan for rough finished surfaces of concrete complete all as specified and directed.\n | 80 | Sqm | |
| 18 | 1.17 | Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surfaces of concrete, flat / curved complete all as specified and directed.\n | 30 | Sqm | |
| 19 | 1.18 | M&L 40 mm thick damp proof course in cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.\n | 34 | Sqm | |
| 20 | 1.19 | M&L 50 mm thick, PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floors complete all as specified and directed.\n | 80 | Sqm | |
| 21 | 1.2 | M&L 75 mm thick, PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. complete all as specified and directed.\n | 20 | Sqm | |
| 22 | 1.21 | M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. complete all as specified and directed.\n | 85 | Sqm | |
| 23 | 1.22 | M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed.\n | 85 | Sqm | |
| 24 | 1.23 | M&L 100 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed.\n | 160 | Sqm | |
| 25 | 1.24 | M&L machine cut kota stone flooring 20 mm (minimum) thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including rubbing and polishing and laid over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.\n | 165 | Sqm | |
| 26 | 1.25 | All as per Sl item No. 1.24 above but in riser of steps, skirting, dado etc, laid over and including 15 mm thick screed bed in CM 1:4\n | 10 | Sqm | |
| 27 | 1.26 | M&L for earth filling under floors, spreading and levelling in layers not exceeding 25 cm thick and well ramming including watering as required complete all as specified and as directed.\nNote:- Earth obtained from excavation after cleaning shall be reused in this item.\n | 36 | Cum | |
| 28 | 1.27 | M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.\nNote:- Consolidated thickness shall only be measured and paid.\n | 33 | Cum | |
| 29 | 1.28 | M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. \n | 33.5 | Cum | |
| 30 | 1.29 | M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.\n | 514 | Sqm | |
| 31 | 1.3 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. \nNote:- WPC shall be measured and paid separately.\n | 431 | Sqm | |
| 32 | 1.31 | Supply only liquid water proofing compound complete all as specified and directed. \nMake:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited\n | 16 | Kg | |
| 33 | 1.32 | M&L preparation of old decorated wall surface and including applying one coat of oil bound distemper complete all as specified and directed. \nMake:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote)\n | 150 | Sqm | |
| 34 | 1.33 | M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. \nMake of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) \nMake of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints\n | 514 | Sqm | |
| 35 | 1.34 | M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed.\nMake :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints\n | 281 | Sqm | |
| 36 | 1.35 | M&L preparation of new plastered wall surfaces and including applying two coats of exterior weather coat paint over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed.\nMake:- Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd\n | 150 | Sqm | |
| 37 | 1.36 | S&F steel window with side hung shutter and including box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed.\nMake:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri\n | 8 | Sqm | |
| 38 | 1.37 | All as per Sl item No 1.36 above but without glazing bars\n\n | 8 | Sqm | |
| 39 | 1.38 | S&F steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed.\nMake:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri\n | 3 | Sqm | |
| 40 | 1.39 | S&F 125 x 60 mm size pressed steel door frames for doors with one or more rebates and including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. \nMake:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri \n\n | 30 | RM | |
| 41 | 1.4 | S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.\n | 80 | Kg | |
| 42 | 1.41 | M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.\n | 760 | Kg | |
| 43 | 1.42 | All as per Sl item No. 1.41 above but 6 to 8 mm dia.\n\n | 440 | Kg | |
| 44 | 1.43 | All as per Sl item No. 1.41 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.\n | 25 | Kg | |
| 45 | 1.44 | S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed.\n | 2170 | Kg | |
| 46 | 1.45 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. \nMake:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Prestar / Bhushan Power & Steel Ltd\n | 315 | Sqm | |
| 47 | 1.46 | All as per Sl item No. 1.45 above but plain steel sheet.\n\n | 22 | Sqm | |
| 48 | 1.47 | S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm but not exc. 10 cm long complete all as specified and directed.\n | 24 | Kg | |
| 49 | 1.48 | M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. \nMake :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)\n | 91 | Sqm | |
| 50 | 1.49 | M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.\nMake:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)\n\n | 30 | Sqm | |
| 51 | 1.5 | S&F 100 mm butt hinge, medium weight, cold rolled mild steel complete all as specified and directed. \nMake:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison\n | 30 | Each | |
| 52 | 1.51 | S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.\nMake:- M/s Bharat / M/s Classic / Alans\n | 20 | Each | |
| 53 | 1.52 | S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.\nMake: M/s Bharat / M/s Classic / Alans\n | 20 | Each | |
| 54 | 1.53 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.\nMake: M/s Bharat / M/s Classic / Alans\n | 6 | Each | |
| 55 | 1.54 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.\nMake: M/s Bharat / M/s Classic / Alans\n | 4 | Each | |
| 56 | 1.55 | S&F 30 mm thick factory made flush door shutters solid core construction, with particle board core and plywood face fanels, commercial type on both side complete all as specified and directed. \nMake:- Modern Doors / Goel Brothers / Hindustan Housing Factory / Joinery Manufacturing Co.\n\n | 4 | Sqm | |
| 57 | 1.56 | S&F 35 mm thick factory made flush door shutters solid core construction, with particle board core and plywood face fanels, commercial type on both side complete all as specified and directed. \nMake:- Modern Doors / Goel Brothers / Hindustan Housing Factory / Joinery Manufacturing Co.\n\n | 12 | Sqm | |
| 58 | 1.57 | S&F 30 mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc.; size of members of shutter as specified in SSR part-I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. \nSpecies of timber :- Gamari (Gnelina arborea) / Chickerassy (Chukrasia Tabularis) / Siris (Albizzia procera) / Kalasiris (Albizzia Odoratissima)\n | 4 | Sqm | |
| 59 | 1.58 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. \nMake:- Saint Gobain / Modiguard / Asahi India / Triveni Float / IAG / Hindustan Pilkington\n | 10 | Sqm | |
| 60 | 1.59 | All as per Sl item No. 1.58 above but 4.8 mm thick.\n\n | 5 | Sqm | |
| 61 | 1.6 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed.\n | 10 | Sqm | |
| 62 | 1.61 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.\n | 2 | Sqm | |
| 63 | 1.62 | S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.\n | 50 | Kg | |
| 64 | 1.63 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets / frame complete all as specified and as directed.\n | 50 | Sqm | |
| 65 | 1.64 | S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof complete all as specified and directed.\nMake of GI Grid- Armstrong / Unifloors / Nittobo\nMake of PVC Insulation Panel :- Duroplast Extrusion Pvt Ltd / Sintex / Rajshri Plastiwood\n\n | 140 | Sqm | |
| 66 | 1.65 | S&F 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed.\nMake of boards:- Everest / Lafarge / Armstrong / Visaka Industries\nMake of aluminium snap grid:- Everest / Lafarge / Armstrong / Visaka Industries\n | 112 | Sqm | |
| 67 | 1.66 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.\n | 25 | Sqm | |
| 68 | 1.67 | M&L 10 mm thick vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. \nMake :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd\n | 75 | Sqm | |
| 69 | 1.68 | All as per Sl item No 1.67 above but in skirting / dado etc. laid over and including screed bed 10 mm thick in CM 1:3.\nMake:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd\n | 25 | Sqm | |
| 70 | 1.69 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed.\nMake:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd\n | 45 | Sqm | |
| 71 | 1.7 | M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. \nMake :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd\n | 145 | Sqm | |
| 72 | 1.71 | M&L 16-18 mm thick granite (of any type) tiles machine cut, bedded over & including 20 mm thick screed bed in CM 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing complete all as specified and directed.\n | 2 | Sqm | |
| 73 | 1.72 | M&L 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed.\n | 20 | Sqm | |
| 74 | 1.73 | M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. \nMake : Lovely / Anjali / Bharat Flooring / Hindustan tiles / Mehtab tiles\n | 30 | Sqm | |
| 75 | 1.74 | M&L decorative type plaster of paris work of size not less than 75 mm x 75 mm, as in cornice or junction of wall and ceiling complete all as specified and directed.\n | 70 | RM | |
| 76 | 1.75 | S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.\nMake - Tata / Jindal Steel / Prakash / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / BST\n | 30 | RM | |
| 77 | 1.76 | All as per Sl item No 1.75 above but 20 mm bore.\n\n | 15 | RM | |
| 78 | 1.77 | M&L cutting chases in brick wall, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc. 10 cm girth complete all as specified and directed.\n | 30 | RM | |
| 79 | 1.78 | S&F vitreous China water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed.\nMake of Water Closet:- Parryware, Cat No. - C0297 / C0278 (white) equivalent in Cera (Ist quality) / Hindware / Essco\nMake of Seat cover:- Parryware Cat No - E8071 (white) or equivalent in Hindware / Cera / Essco\n | 1 | Each | |
| 80 | 1.79 | S&F vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, waste coupling and cutting for and pinning in ends of brackets etc, complete all as specified and directed. \nMake of wash hand basin:- Parryware, Cat No. - C0406 *(SP) (White) or equivalent in Cera (1st quality) / Hindware / Essco\nMake of waste coupling - Prayag / Polytuf. \nMake of PVC waste pipe - Prayag / Polytuf\n | 1 | Each | |
| 81 | 1.8 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and directed. \nMake :- Prayag / Zircon / Cera / Saint Gobain / Modiguard\n | 1 | Each | |
| 82 | 1.81 | S&F health faucet 15 mm bore, chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook complete all as specified and directed. \nMake:- Jaquar, Cat No. - ALD-565 or equivalent in Kohler / Cera / Parryware\n | 1 | Each | |
| 83 | 1.82 | S&F pillar tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. \nMake:- Jaquar, Cat No. - CON-011KN or equivalent in Kohler / Cera / Parryware\n\n | 1 | Each | |
| 84 | 1.83 | S&F 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. \nMake:- Jaquar, Cat No. - CON-047KN or equivalent in Kohler / Cera / Parryware\n | 2 | Each | |
| 85 | 1.84 | S&F angle stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed.\nMake:- Jaquar, Cat No. - CON-059KN or equivalent in Kohler / Cera / Parryware\n | 5 | Each | |
| 86 | 1.85 | S&F corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, and side not less than 225 mm with chromium plate bracket guard complete all as specified and directed.\nMake:- Jaquar, Cat No.- ACN-1173 or equivalent in Kohler / Cera / Parryware\n | 2 | Each | |
| 87 | 1.86 | S&F towel rail, 20 mm dia & 600 mm long of stainless steel chromium plated, fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed.\nMake:- Prayag, Cat No. - BA-1S or equivalent in Gem / Parko\n | 2 | Each | |
| 88 | 1.87 | S&F CP fancy type soap dish holder of dia not less than 110mm, with wall flange complete all as specified and as directed.\nMake:- Jaquar, Cat No. - ACN-1131N or equivalent in Kohler / Cera / Parryware\n | 2 | Each | |
| 89 | 1.88 | S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm complete all as specified and directed.\nMake:- Prayag Cat No.- 323-TK or equivalent in Polytuf\n | 3 | Each | |
| 90 | 1.89 | S&F 100 mm dia grating, doom type, chromium plated, with or without waste hole, fixed to floor trap complete all as specified and as directed.\nMake :- Prayag, Cat No. - FT-03 / FT-04 or equivalent in Gem / Parko / ESSCO\n | 2 | Each | |
| 91 | 1.9 | S&F in repairs 32 mm bore PVC waste pipe for WHB / Sink etc. complete all as specified and directed. \nMake:- Prayag Cat No - 327 or equivalent in Polytuf\n | 2 | Each | |
| 92 | 1.91 | Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.\n | 2 | Each | |
| 93 | 1.92 | All as per Sl item No 1.91 above but exc. 1.5 Sqm but not exc. 4.0 Sqm each\n\n | 2 | Each | |
| 94 | 1.93 | S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.\nSpecies of timber :- Gamari (Gnelina arborea) / Chickerassy (Chukrasia Tabularis) / Siris (Albizzia procera) / Kalasiris (Albizzia Odoratissima)\n | 0.1 | Cum | |
| 95 | 1.94 | S&F 300 mm, ordinary rat tail rod pattern springs and including roller and roller plate complete all as specified and directed.\n | 2 | Each | |
| 96 | 1.95 | S&F 65 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.\nMake:- M/s Bharat / M/s Classic / Alans\n | 4 | Each | |
| 97 | 1.96 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.\n\n | 10 | Kg | |
| 98 | 1.97 | M&L providing precast cement concrete 1:2:4 Type B1 (using 20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match including necessary formwork or moulds etc. complete all as specified and as directed.\n | 0.1 | Cum | |
| 99 | 1.98 | S&F aluminium anodised powder coated frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and directed.\nMake:- Indal Co / Hindal Co / Jindal / Ajit India\n | 100 | Kg | |
| 100 | 1.99 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.\n | 1 | Cum | |
| 101 | 2 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc.complete all as specified and directed.\n | 50 | RM | |
| 102 | 2.01 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. \nMake:- Supreme / Prince / Kisan Mouldings Limited | 15 | RM | |
| 103 | 2.02 | All as per Sl item No. 2.01 above but 110 mm bore.\n\n | 10 | RM | |
| 104 | 2.03 | S&F PVC (SWR) 75 mm bore bend of any radius complete all as specified and directed. \nMake:- Supreme / Prince / Kisan Mouldings Limited | 5 | Each | |
| 105 | 2.04 | All as per Sl item No. 2.03 above but 110 mm bore.\n\n | 5 | Each | |
| 106 | 2.05 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2010 Part-II Rates) complete all as specified and directed. \nMake:- Rajshri Plastiwood Ltd / Sintex / Polywood / Hindopan / Marino\n | 5 | RM | |
| 107 | 2.06 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed. \nMake:- Rajshri Plastiwood Ltd / Sintex / Polywood / Hindopan / Marino\n | 2 | Sqm | |
| 108 | 2.07 | S&F factory made 3 seater bench made out of CRC steel sheet, chromium plated having three nos perforated shell seat and back rest with side arms at both ends, overall size not less than 1775 mm (length) x 670 mm (width) x 800 mm (height) & weight not less than 30 Kg complete all as specified and directed.\n | 6 | Each | |
| 109 | 2.08 | M&L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc, complete all as specified and directed.\n | 1 | Cum | |
| 110 | 3 | BOQ Part-II (E/M Work) | |||
| 111 | 3.01 | M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good surfaces to match with adjoining surface complete all as specified and directed.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n | 66 | Point | |
| 112 | 3.02 | All as per Sl. item No. 3.01 above but for one 5 / 6 Amps socket outlet point on same board.\n | 12 | Point | |
| 113 | 3.03 | All as per Sl. item No. 3.01 above but for one 5 / 6 Amps socket outlet point on independent board.\n | 12 | Point | |
| 114 | 3.04 | All as per Sl. item No. 3.01 above but for one light point controlled by two, 2 - way switches.\n | 5 | Point | |
| 115 | 3.05 | M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for 15 / 16 Amps socket outlet on independent board and including cutting chasing (as required) and making good surfaces to match with adjoining surface complete all as specified and directed.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n | 20 | Point | |
| 116 | 3.06 | Taking down copper / aluminium concealed sub main wiring complete with all fixture and fittings including cutting chasing as required and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.\n | 65 | RM | |
| 117 | 3.07 | M & L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed.\nNOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n | 175 | RM | |
| 118 | 3.08 | All as per item No. 3.07 above but with 2 runs of 6.0 Sqmm main wire along with 1 run of 6.0 Sqmm earth wire.\n\n | 140 | RM | |
| 119 | 3.09 | S&F switch piano flush type one way, 5 / 6 Amps, 240 volt complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 90 | Each | |
| 120 | 3.1 | All as per item No. 3.09 above but two way switch.\n\n | 10 | Each | |
| 121 | 3.11 | S&F socket outlet 5 pin 5 / 6 Amps, 240 volts complete all as specified and directed. \nMake :- Havells / Anchor / Legrand\n | 20 | Each | |
| 122 | 3.12 | S&F switch socket combination 2 in 1, 6 Pin, 5 & 15 Amp, flush type universal complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 20 | Each | |
| 123 | 3.13 | S&F stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 230/240 Volts grade complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 14 | Each | |
| 124 | 3.14 | S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.\nMake:- Havells / Anchor / Legrand\n | 74 | Each | |
| 125 | 3.15 | S&F LED light fitting 1 x 20 watt batten type 230 Volts, extruded aluminium housing, with luminous efficacy 100 Lumen/watt (minimum), suitable for surface mounting, with integrated high effeciency driver etc. all electrical accessories, pre-wired upto terminal block, fixed with 02 Nos of PVC round / square blocks, screws etc. inlcuding electrically connecting complete all as specified and directed.\nMake:- Surya, Model - SLE BT 20 IL or C&S, Model - NAKSHATRA/20W or HPL, Model - HLPT51520CW r equivalent in Crompton\n | 36 | Each | |
| 126 | 3.16 | All as per item No. 3.15 above but 1 x 9 / 10 watt.\nMake:- Surya, Model - SLE BT 10 or C&S, Model - NAKSHATRA/10W or Crompton, LDL-10-CDL or equivalent in HPL\n | 8 | Each | |
| 127 | 3.17 | S&F LED street / security light fitting 1 x 20 watt, IP-65 (minimum), integrated type with high efficiency electronic driver, pressure die cast aluminium housing, internally prewired and including electrically connecting with twin core twisting flexible cord of 0.75 sqmm copper conductor cable complete all as specified & directed.\nMake:- Surya, SLE UL 20W IP66 (LXN) or HPL, HPLLEDSL2060E or C&S, INDUS-E/20W or Crompton, LST-20-CDL-M\n | 12 | Each | |
| 128 | 3.18 | S&F exhaust fan 380 mm sweep, heavy duty, metal body, 1400 RPM (minimum), AC single phase, 230 V, 50Hz with bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed.\nMake :- Crompton / Bajaj / Orient / Havells / Almonard\n | 4 | Each | |
| 129 | 3.19 | S&F ceiling fan 1200 mm (minimum) sweep, AC single phase 230 V, 340 RPM (minimum) suspended from fan hook and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to ceiling fan complete all as specified and directed. \nMake :- Bajaj / Havells / Orient / Crompton Greaves / Almonard\n | 14 | Each | |
| 130 | 3.2 | S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, 100A copper bus bar for fixing MCB, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.\nMake :- L&T / Legrand / Siemens / ABB / Schnieder / Havells / Hager\n | 4 | Each | |
| 131 | 3.21 | S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. \nMake :- L&T / Legrand / Siemens / ABB / Schnieder / Havells / Hager\n | 22 | Each | |
| 132 | 3.22 | All as per items No 3.21 above but MCB SPN 40 to 63 Amp.\n\n | 4 | Each | |
| 133 | 3.23 | M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and complete all as specified and directed.\n\nNote:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.\n | 3 | Each Set | |
| 134 | 3.24 | S&F metal plug and socket DB, double pole 240 volts and including one 20 Amp MCB SPN, C-Curve complete all as specified and directed. \nMake :- Legrand / Siemens / ABB / Schneider / Havells / Hager\n | 4 | Each | |
| 135 | 3.25 | S&F 40 mm bore galvanised steel water tubing, light grade with necessary fittings, fixed along electric pole etc, for cable protection complete all as specified and directed.\nMake - Tata / Jindal Steel / Prakash / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / BST\n | 4 | RM | |
| 136 | 3.26 | Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 35 Sqmm x 3.5 Core, laid in trenches / duct / on pole complete all as specified and directed.\nMake :- Havells / KEI / Polycab / Finolex / Gloster cables Ltd / Asian Cable / RR Kabel Ltd.\n\n | 120 | RM | |
| 137 | 3.27 | M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. \nNote:- Punned thickness shall only be measured and paid.\n | 10 | Cum | |
| 138 | 3.28 | Supply & laying sub class 'B' bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.\n | 960 | Each | |
| 139 | 3.29 | M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box & modular white cover plate with frame of required module for mounting or housing switches, socket outlets, fan regulators, etc. incuding blankng plates & all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good surfaces to match with adjoining surface & taking down complete all as specified and directed.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n | 28 | Point | |
| 140 | 3.3 | All as per Sl. item No. 3.29 above but for one 5 / 6 Amps socket outlet point on same board.\n\n | 4 | Point | |
| 141 | 3.31 | All as per Sl. item No. 3.29 above but for one 5 / 6 Amps socket outlet point on independent board.\n | 8 | Point | |
| 142 | 3.32 | M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box, modular white cover plate with frame of required module, blankng plates & all other fixing accessories for 15 / 16 Amps socket outlet on independent board and including cutting chasing (as required) and making good surfaces to match with adjoining surface including taking down complete all as specified and directed.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n | 4 | Point | |
| 143 | 3.33 | M&L point wiring with 4 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC conduit (medium grade) concealed in wall / ceiling with and including 4 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box, modular white cover plate with frame of required module, blankng plates & all other fixing accessories for 20 / 25 Amps socket outlet / power unit on independent board and including cutting chasing (as required) and making good surfaces to match with adjoining surface including taking down complete all as specified and directed.\nMake of cable:- Havells / Finolex / KEI / Polycab / RR Kabel Ltd. / HPL\nMake of PVC Conduit:- Presto Plast / Finolex / Indo American Electricals Ltd / Kalinga Gold / Richa Cables Pvt Ltd / Polycab\n | 3 | Point | |
| 144 | 3.34 | S&F modular switch 1 way 6A, 1 module, white complete all as specified and directed.\nMake:- Havells (IVY & IRENE) / Anchor (Vision & ROMA) / C&S\n | 39 | Each | |
| 145 | 3.35 | All as per Sl item No. 3.34 above but 16 Amps.\n\n | 4 | Each | |
| 146 | 3.36 | S&F modular socket outlet, 6A - 2/3 pin combined 2 module, white complete all as specified and directed.\nMake:- Havells (IVY & IRENE) / Anchor (Vision & ROMA) / C&S\n | 12 | Each | |
| 147 | 3.37 | All as per Sl item No. 3.36 above but 6 / 16 Amps.\n\n | 4 | Each | |
| 148 | 3.38 | S&F modular bell push 6A, single pole, 1 module with indicator, white complete all as specified and directed.\nMake:- Havells (IVY & IRENE) / Anchor (Vision & ROMA) / C&S\n | 1 | Each | |
| 149 | 3.39 | S&F electronic modular fan regulator, stepped type, white 120 W - 2 module complete all as specified and directed. \nMake :- Havells (IVY & IRENE) / Anchor (Vision & ROMA) / C&S\n | 4 | Each | |
| 150 | 3.4 | S&F call bell, ding dong, AC 230 V, single pole complete all as specified and directed.\nMake :- Havells / Anchor / Legrand\n | 1 | Each | |
| 151 | 3.41 | S&F geyser of capacity 25 Litres, 230V, 50Hz, vertical, wall mounted type, BEE 5 star rated, ABS outer body, inner tank with vitreous enamel coated, incoloy glass coated heating element, adjustable thermostat for temperature regulation, multifunctional safety valve with & including 3 core copper cable of 1 to 2 metre length with 3-pin plug of 16A capacity, fixing arrangement such as. bracket, nuts, bolts washers etc. complete all as specified and directed.\nMake:- V-Guard / Bajaj / Usha / Havells / Crompton Greaves / Jaquar & Company Pvt. Ltd.\n | 1 | Each | |
| 152 | 3.42 | S&F PVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for hot water supply complete all as specified and directed.\nMake:- Prayag Cat No.- 323-HK or equivalent in Polytuf\n | 2 | Each | |
| 153 | 3.43 | S&F MCB protected power unit with enclosure suitable for flush mounting including 25 amp socket, 3 pin plug and one MCB DP and starter 25 Amp, 10 kA, 240V 'C' curve inlcuding taking down complete all as specified and as directed. \nMake :- Havells, Model - DHDUCDP0253016-25 or equivqalent in L&T / Legrand / Siemens / ABB / Schnieder / Hager\n | 3 | Each | |
| 154 | 3.44 | S&F 1 x 15 watt, LED down light fitting, 6000 K, round shape, PDC aluminium housing, suitable for recess mounting, integrated type, with high efficiency opal diffuser & integrated electronic driver etc., all electrical accessories pre-wired upto terminal block including all fixing accessories, electrically connecting complete all as specified & directed.\nMake :- Crompton, LSCRM-15W-CDL or HPL, HLPLEDRDL15CW or Surya, SLE DLR 15W XX Stellar RD or equivalent in C&S\n | 12 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
