Annual Rate For Various Work Including Materials And Labour Charges Of Vapi Nagar Palika (Annual Rate 2021-2022)=1 Applying two coats of Birla (White Cement based) or Asian acrylic lappy (putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand Papered smooth. 2 Distempering (Three Coat) with oil bound washable distemper of approved brand and manufacture and of required shade on wall surfaces to give and even shade over and including a primer coat with alkali resistance primer of approved brand after thoroughly brushing the surface free from other foreign matter and also including preparing the surface even and sand papered smooth. 3 Distempering (Three Coat) with oil bound washable distemper of approved brand and manufacture and of required shade on Ceiling & Sloping Roof surfaces to give and even shade over and including a primer coat with alkali resistance primer of approved brand after thoroughly brushing the surface to give and free from other foreign matter and also including preparing the surface even and sand papered smooth. 4 Finishing wall with Weather Proof Acrylic Exterior Emulsion Paint on wall surface (two coats) to give and required shape even shade and of approved brand and manufacturer after thoroughly brushing the surface to remove all dirts, and remains of loose powdered materials etc. complete. 5 Applying priming coat over new steel and other metal surface after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. 6 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter. 7 Providing and Laying 25mm thick Polished Kota stone slab flooring over 20mm (average) thick base of cement mortar 1:6 (1 Cement : 6 Coarse Sand) and jointed with grey cement slurry including rubbing and polishing etc. complete. -2- 8 Providing and laying 24x24 Vetrified 8 mm thick tiles flooring over 20 mm avrage base of cement mortar 1:6 (1 Cement : 6 Coarse Sand) on new surface or fixing on existing flooring by adhesive material including dismantling of existing flooring and jointed with colour cement slurry including finished with flush pointing and cleaning the surface etc. complete. 9 Providing and laying white glazed tiles 6mm thick in sakirting riser of steps and dedo on 10 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white cement slurry 10 Providing and Laying 25mm thick marble stone slab flooring ober 20mm (avg.) base of cement mortar 1:6(1-cement : 6 coarse sand) jointed with grey cement slurry including rubbing and polishing complete. 11 Providing and laying Marbo Grenite tiles 8 to 10 mm thick , in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry (upto 10 ton) 12 PProviding and Laying 25mm thick Polished granite stone 20mm to25mm thick Colour base of cement mortar 1:6(1- cement : 6 coarse sand) jointed with grey cement slurry including rubbing and polishing complete. 13 Providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar crème out upto surface using white cement including rounding off junctions and extending them upto 15cm along the wall, clearing with water and oxalic acid. etc. as directed. 14 Providing & fixing water proofing treatment on terrace including (a) applying neat cement slurry 2.75 kgqsq.mt of cement admixed with water proofing compound after cleaning after cleaning the surface (b) laying cement concrete using brick bats 25 to 100mm size with 50% cum 1:5(1cement :5 coarse sand ) admixed with water proofing compousd over 20mm thick layer of CM 1:5 to required sloped including rounding of junction of wallsand slab @ aftertwo days of proper curing applying a second coat of cement slurry (d) finishing the surface with 20mm thick CM 1:4 china mosaic tilling and finally finishing the surface with trowel with white cement slurry (e) after finishing the whole terrace shall be flooded with water for a period of two week. 15 Providing and fixing 35mm thick Indian teak wood shutters for doors, windows and clearstory windows including sal wood frames of finished size 10 cm x 7 cm include .medium quality anodized aluminium fixtures and fastenings include primer coat of approved quality and two coats of oil painting etc. Fully panelled. Windows 16 Providing and fixing window having extruded alluminium color anodized section frame main outer size 95mm x 24mm x 1.17mm (of jindal Section no: 2459 @ wt. 0.738 Kg/Rmt.), horizontal three track member size 92mm x 31.75mm x 1.30mm (of jindal Section no: 8688, @ Wt. 1.07Kg./Mt.), vertical member of size 92mm x 31.75mm x 1.50mm (of jindal section no: 8933@ Wt. 1.06 Kg/mt.) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal section no: 8947@ Wt. of 0.456 Kg./Mt) vertical member of size 40mm x 18mm x 1.29mm (of jindal Section No : 8949, @ Wt. 0.456 Kg/mt with 5mm thick transparent bronze colour tinted float glass with powder coated alluminium fittings & fixtures and transperent silicon sealent glass fixing to frame as per details etc. complete for window. 17 Providing and Fixing FRP Frame size 125 mm x 65 mm and 35 mm thick FRP Shutter with wood grain raised panelled design finish shutter having extra reinforcement on sides and & frame and in Gel Coat finish. The core of the shutter is to be filled up with injected polyurethane foam done in situ along with embedded wooden pieces for stiffening & also taking hinges and fixtures. The whole FRP frame and shutter is to be water proof, weather proof, termite proof and resistance to mild acid/Alkali. Rates are to be inclusive of S.S. hinges with fastener sleev and alluminium fixture and fastening.Product should have 3 years perfomance gurantee and company have ISO 9001-2000 Certificate 18 Providing and Fixing 12mm thick tuffen Glass Door with SS patch fitting ,handles locks and all SS fixture Etc Complete as directed by Engineer in charge. 19 False Ceilling work Providing and fixing 2x2 india gypsum sheet with G.I. angles of approved make with butt jointing and wood screws including the cost of materials and labour charges as directed by Engineer in charge. 20 Providing and fixing 8x4 Cement sheet with G.I. angles of approved make with butt jointing and wood screws including the cost of materials and labour charges as directed by Engineer in charge. 21 Wall POP work Super fine 12-18 mm thick wall POP with approved make as per Level including wall hacking including the cost of materials and labour charges as per directed by Engineer in charge. 22 Providing and fixing M. S. Plain Grills and Railing of requried pattern of window etc. with M. S. flats at requried spacings and frame alround square or round bars with round headed bolts and nuts or by screws. 23 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, 24 Providing corrugated A.C sheet of class-3 roofing fixed with J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses. As per directed by Engineer-in-charge. 25 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (D) In trussses and trussed purlins, upto 25 M. span and 15 M. ovarall height. (upto 10 ton) 26 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. Laths inter-locked together through their entire length and jointed toggether at the ends by and locks mounted on specially designed pipe shaft with bracket plates guide channels and arrangements for inside and out side locking with push pull operation complete including the cost of hood cover and spring. (A) Shutter having width below 3.5 M. 27 Providing and fixing M. S.Plate thick Havy Chamber Cover . with M. S. I channels welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. and fixing with cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- Graded stone aggregate 20mm normal size) Including cost of Excavation, Brick masonary Wall, sand faced ,cement plaster and curing etc complete as directed by Engineer-in-charge. 16.00 mm Thick 18.00 mm Thick 20.00 mm Thick 22.00 mm Thick 25.00 mm Thick 28 providing and fixing Rebaring in All R C C concrete work as per directed by Engineer-in-charge. 8mm 10mm 12mm 16mm 29 Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. Work 30 Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. Plumbing Work 31 Providing and fixing wash down water closet European type W.C. Pan with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 Cement : 1 Fine Sand) (Seat and Cover to be measured and paid for saperately) (A) Vitreous China - (i) In White Colour. 32 Providing and fixing wash down water closet Indian type W.C. Pan with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 Cement : 1 Fine Sand) (Seat and Cover to be measured and paid for saperately) (A) Vitreous China - (i) In White Colour 33 Providing and fixing G.I. Inlet Connection for flush pipe with W.C. Pan. 34 Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers. (B) Black plastic seat and cover. 35 Providing and fixing 430mm x 260mm x 350mm size white earthen ware flat back lip type urinal of approved quality including providing and fixing waste pipe trap and outer fixtures etc. and jointing the same with urinal etc. complete as directed by Engineer-in-charge. 36 Providing and fixing 15mm. Dia C. P. Brass screw down bib cock of approved quality including fixing the same in pipeline and testing etc. complete as directed by Engineer-in-charge. 37 Providing and fixing 15mm. Dia C. P. Brass stop cock of approved quality including fixing the same in pipeline and testing etc. complete as directed by Engineer-in-charge. 38 Providing and fixing C.P. brass shower rose with 15 mm or 20 mm inlet (A) 100 mm Dia. 39 Providing and fixing gun metal chek or non return fullway wheel valve. (A) 15 mm Dia. 40 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden pluges with C.P. brass screws (B) 600 mm x 20 mm size. 41 Providing and fixing toilet paper holder (A) C.P. brass. 42 Providing and fixing 100 mm dia sand cast iron grating for gully, floor or nanhi trap. 43 Providing and fixing 150mm x 100mm size P or S type square mount stone ware gully trap with C. I. Grating brick masonry chamber and water tight C. I. Cover with frame of inside 300mm x 300mm size with cutting and making good the walls floors etc. complete as directed by Engineer-in-charge. 44 Providing, laying and constructing brick masonry chamber for underground C. I. Inspection Chamber with Inside Dimension 455mm x 610mm x 450mm dedo for single pipe line with bends having crushing strength not less than 35Kg./Cm2 on C. M. (1:5) (1 cement, 5 Sand) C. I. Cover with frame (light duty) of 455mm x 610mm internal dimension total weight of cover with frame to be not less than 38.00 Kgs. (Wt. of Cover 23 Kgs. and wt. of Frame 15 Kgs.) with R.C.C. top slab with 1:2:4 ( cement, 2 Coarse sand, 4 graded stone (Kapachi) ) foundation concrete 1:5:10 (1 cement, 5 Coarse sand, 10 brick bats of 40mm nominal size) inside plaster 15mm. thick with C. M. 1: (1 cement, 3 Coarse sand) finished smooth with a floating coat of neat cement slurry on walls and bed concrete including curing etc. complete as directed by Engineer-in-charge. 45 Providing, laying and constructing brick masonry chamber for underground C. I. Inspection Chamber with Inside Dimension 600mm x 850mm x 450mm dedo for single pipe line with bends having crushing strength not less than 35Kg./Cm2 on C. M. (1:5) (1 cement, Sand) C. I. Cover with frame (light duty) of 455mm x 610mm internal dimension total weight of cover with frame to be not less than 38.00 Kgs. (Wt. of Cover 23 Kgs. and wt. of Frame 15 Kgs.) with R.C.C. top slab with 1:2:4 (1 cement, 2 Coarse sand, 4 graded stone (Kapachi) foundation concrete 1:5:10 (1 cement, 5 Coarse sand, 10 brick bats of 40mm nominal size) inside plaster 15mm. thick with C. M. 1:3 ( cement, 3 Coarse sand) finished smooth with a floating coat of neat cement slurry on walls and bed concrete including curing etc. complete as directed by Engineer-in-charge. 46 Supplying And fixing PVC water tank of ISI make including delivery at site, supply and fixing inlet, outlet, overflow, ballcock, drainage sleeves of specific size, with necessary neoprene gasket/packing/washer, G.I.washer, and checknut etc. compt as directed on terrace,loft,bathroom etc in any height.The rate shall be include for fixing additional accessories supplied by supplyer accessories. 47 Providing and fixing washbasin with single hole for pillar tape with C.I. or M.S. brackets painted white including cutting holes and making good thesame but excluding fittings. (A) vitreous china : (ii) Flat back washbasin 550 mm x 400 mm size (i) In white colour. 48 Providing and laying (To level or slopes) and jointing with stiff mixture of cement mortar in proportion 1:1 salt glazed stone ware pipes including testing of pipes and joint complete. (B) 150 mm Dia 49 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C Sheets or plywood sheet and fixing to wooden pluge with c.p brass screws and wasers. 50 Providing, laying and jointing in true line and level 50 mm dia U.P.V.C. Pipe (SCH-40) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 51 Providing, laying and jointing in true line and level 40 mm dia U.P.V.C. Pipe (SCH-40) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 52 Providing, laying and jointing in true line and level 32 mm dia U.P.V.C. Pipe (SCH-40) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 53 Providing, laying and jointing in true line and level 25 mm dia U.P.V.C. Pipe (SCH-40) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 54 Providing, laying and jointing in true line and level 15 mm dia U.P.V.C. Pipe (SDR 13.5) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 55 Providing, laying and jointing in true line and level 50 mm dia C.P.V.C. Pipe (SDR 13.5) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 56 Providing, laying and jointing in true line and level 40 mm dia C.P.V.C. Pipe (SDR 13.5) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 57 C.P.V.C. Pipe (SDR 13.5) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 58 Providing, laying and jointing in true line and level 25 mm dia C.P.V.C. Pipe (SDR 13.5) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 59 Providing, laying and jointing in true line and level 20 mm dia C.P.V.C. Pipe (SDR 13.5) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 60 Providing, laying and jointing in true line and level 15 mm dia C.P.V.C. Pipe (SDR 13.5) including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 61 Providing, laying and jointing in true line and level 160 mm dia P.V.C. Pipe 6 kgf / Sq.mt including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 62 Providing, laying and jointing in true line and level 110 mm dia P.V.C. Pipe 6 kgf / Sq.mt including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 63 Providing, laying and jointing in true line and level 90 mm dia P.V.C. Pipe 6 kgf / Sq.mt including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 64 Providing, laying and jointing in true line and level 75 mm dia P.V.C. Pipe 6 kgf / Sq.mt including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two meter c/c. or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. -9- 65 Providing sock pit of 5.0 Cu.Mt volume including excavating and filling brick bats with dry masonary work at top for 45 cm. height including covering the top with stone including providing vatas in cm 1:3 with finishing curing etc. complete as directed. 66 Providing and fixing RCC havy duty (35 ton Capacity ) cost of various size ant various place of vapi nagarpalika area incuding cost of cover frame and any type of excavation, brick masonary wall, sand faced ,cement plaster curing and etc complete as directed by Engineer-in-charge. inside dimensions 450.00 mm X 450.00 mm inside dimensions 750.00 mm X 750.00 mm inside dimensions 900.00 mm X 900.00 mm inside dimensions 1050.00 mm X 1050.00 mm 67 Supply of Electric Breaker machine with Operator, etc with all taxes complete. 68 Providing fabricated collapsible barricades size for 4 x 10 dersign approvel by engg in charge. 69 Providing, Supplying and fixing of Pre- stressed pre-cast Compound Wall including R.C.C. Planks of size 2.15mx0.30m (thickness 45-50 mm) including loading, unloading, all taxes and excavation of necessary pit for footing of post with all necessary materials and labours as directed by EIC and Authority. Wall Hight 0.60 Mt Wall Hight 1.25 Mt Wall Hight 1.50 Mt Wall Hight 2.00 Mt Wall Hight 2.15 Mt 70 Providing and fixing 2.00 Meter high fencing with 2.0 Meter long R C C Pole 40mm x 40 mm x6 mm and 3 coats white wash fixed at 2.5 Mt, C/c. with six Horizontal lines and two diagonals of galvanised steel barbed wire weighting 11.26 Kg. per 100 Meter, strained and fixed to posts with G.I, staples including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 as per direct by Engineer in charge. 71 Providing and Laying of Chequered Tiles over 20mm (average) thick base of cement mortar 1:6 (1 Cement : 6 Coarse Sand) and jointed with grey cement etc. complete.
