Procurement Of Furniture For Judicial Court At Bilaspur In Yamuna Nagar Distt . , bilaspur-Haryana

Procurement Of Furniture For Judicial Court At Bilaspur In Yamuna Nagar Distt . .- 1.01 4 Door Book Case Shall Have The Configuration Of 914Mm ( W ) X320mm ( D ) X1742mm ( H ) . The Unique Design Provides The Right Rigidity To The Top Hinged Doors , Which Shall Facilitate Easy Use. The Book Case Shall Be Made From Prime Quality Crca Steel With Anti Rusting Treatment. It Shall Have A Rigid Knock Down Construction. The Top Pannel, Back Pannel And Side Pannel Are Made From 0.7Mm High Yield Crca And Other Components From 0.8Mm Crca. Each Door Shall Have A 6 Lever Cam Lock With Common Key. 3Mm Thick Glass Should Be Used In Each Door For Clear Inside Vision Whih Shall Be Secured In A Metal Frame Through A Rubber Gasket. Scissor Mechanism Should Be Provided In Each Door For Receding Inside The Top Of Every Compartment And It Shall Ensure Parallel And Smooth Movement. Each Door Should Be Provided With Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Shall Have A Storage Shelf With A Udl Capacity Of Max 80 Kg. The 2 Door Book Case Shall Have 18Mm Plb Top Straight Edge With Pvc Lipping. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 12 / Each 3 1.02 The Cushioned Seat And Back Assembly Consists Of Seat Base Moulded In Glass Filled Poly-Amide, Moulded Polyurethane Foam And Upholstered With High Stretch Knitted Polyester Fabric. The Back Size Shall Be 45.5Cm W X 53.0Cm H. The Hr Polyurethane Foam Used In Seat And Back Cushion Is Moulded In Density 45Kg Per M3. The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjusments. The Cantilevered Seat Offers Impact Cushioning While Seating And Synchronises With The Back Movement During Posture Changes. The ‘S: Shaped Spines Moulded In High Strength Glass Filled Polyamide And The Spine Connector Moulded In Glass Filled Polyamide Form The Back Spine Structure Involved In Multi Dimensional Recline Motion. The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limiter Feature Which Is Inbuilt In Saet Base And The Tension Is User Weight Dependent. The Adjustable Armrests Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glass Filled Polyamide. The Pneumatic Height Adjustment Shall Have A Stroke Of 9.2Cm.The Pedestal Is Injection Moulded In Glass Filled Polyamide And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66Cm Pitch Centre Diameter And 76Cm With Castors. The Overall Dimensions Of The Chair Shall Be 76Cmx 76Cm X ( 99.5-108.8Cm ) . The Seat Height Shall Be ( 44.5-53.8Cm ) . The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 53 / Each 4 1.03 The Seat And Back Shall Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Seat Shall Be Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. The Dimensions Of Back Shall Be 47.5 Cm ( W ) X 58.0 Cm ( H ) And Of Seat Shall Be 47.0 Cm ( W ) X 48.0 Cm ( D ) . The Hr Polyurethane Foam Shall Be Moulded With Density= 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf As. Per Is:7888 For 25% Compression. The One-Piece Armrests Shall Be Injection Moulded From Black Co.Polymer Polypropylene. Overall Dimensions Of Chair Shall Be Seat Height - 46.5Cm, Height - 89.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-61.4 Cm And Depth-64.5 Cm. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 87 / Each 5 1.04 Supplying And Placing In Position Conference Table Of The Following Specifications. Conference Table With Wire Manager Size Shall Be Single Seater 760 Width Mm X 600 Depth Mm , Two Seater 1360 Width Mm X 600 Depth Mm , Half Round ( 2 Seater ) R 713 + Quarter Round ( 1 Seater ) R 713 . The Top Shall Be 30.8 Mm Thick ( 18 Mm + 12 Mm + Osr Mdf + Membrane On Top ) . Edge Profile Shall Be Waterfall Edge 10 Mm Radius On Top Edge And 5 Mm At Bottom . In Understructure The Legs Shall Be Made From 25 Mm Ppb Having A Straight Profile With Half Round Edges And Clad With 0.6 Mm Thick Post Forming Laminate . Overall Thickness Of Leg Shall Be 26.2 Mm The Modesty Panel In Understructure Shall Be Mae From Plt ( Pre Laminated Twin ) Boards Of 18 Mm Thick . There Shall Be Wire Management Wire Carrier Shall Be Made From 0.6 Mm Thick Crca Painted And Carrier Cover Shall Be Made Of 12 Mm Thick Mdf Painted All Over. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 1 / Each 6 1.05 The Seat Shell Shall Be A Welded Assembly Of Seat, Back And Side Frame. The Seat And Back Shall Be Made Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Shall Be Welded To Sideframe Of Size 32 Mm X 5 Mm Thk Hr Steel. The Welded Assembly Shall Be Powder Coated ( Dft 40-60 Microns ) . The Seat Shall Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Shall Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Shall Aids In Easy Maintenance. The Dimensions Of Seat Shall Be 47.8 Cm ( W ) X 44.6 Cm ( D ) And Of Back Shall Be 41.6 Cm ( W ) X 23. Cm ( H ) . Understructure Assembly Shall Consists Of Connecting Beam And Leg Assembly Made Of M.S.E.R.W. Oblong Tube Of Size 75 Mm X 50 Mm X 2 Mm Thk.The Welded Structure Assembly Shall Be Powder Coated ( Dft 40-60 Microns ) .The Leg Assembly Shall Be Fitted With Shoes And Levellers In Nylon. The Leg Structure Shall Be Designed With Minimal Area Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fiited To Leg Assembly Shall Help In Aligning The Structure For Back To Back Arrangements. Levelers Should Take Care Of Uneven Flooring .Connecting Beam Shall Be Fitted With Snap Locking End Cap.It Also Aids In Side-By-Side Understructure Alignment. Armrest Assembly Shall Consists Of Armrest Frame And Armrest Pad. The Armrest Frame Shall Be Made Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Shall Be Powder Coated ( Dft 40-60 Microns ) . Armrest Pad Shall Be Injection Molded In Nylon And Shall Be Fitted Onto The Armrest Frame. Overall Dimensions Shall Be Seat Height - 44.1 Cm, Height - 78.5 Cm, Width & Depth Of Chair As Measured From Pedestal - Width-169.5Cm And Depth-63.8 Cm. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 98 / Each 7 1.06 Glass Shall Be 10+ / -0.3Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. It Shall Be A Welded Assembly Made In Ss202 Grade Having Dia. 12+ / -0.04 As Per Is:1762. Overall Dimensions Of Table Shall Be Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=35.1 Cm. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 8 / Each 8 1.07 Supplying And Placing In Place Of 3 Seater Sofa. The Overall Dimensions Of The Sofa Shall Be 2060W X 905D X 855H. The Seat Should Be Made Of Pu Foam With Density 28 ± 2 Kg / Cu.Mtr Having An Additional Top Layer Of Supersoft Pu Foam With Density 32 ± 2 Kg / Cu. Seat Should Be Upholstered With Fabric Or Leatherette. 2 ) Back Foam: The Back Should Be Made Of Pu Foam With Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg / Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure Should Be Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood ( Which Also Shall Be Resistance And Termite Proof As Per Is:303. ) And Pinewood Of Cross Section Deviod Of Major Knots And Surface Defects 6 Nos. Per Seat And 3.8Mm Dia. Zigzag Spring Assembly Is Mounted Over Understrucrure For Cushioning Effect. It Should Be A Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate With Plastic Endcap. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 6 / Each 9 1.08 Supplying And Placing In Place Of 5 Seater Sofa. The Overall Dimensions Of The Sofa Shall Be 2060W X 905D X 855H. The Seat Should Be Made Of Pu Foam With Density 28 ± 2 Kg / Cu.Mtr Having An Additional Top Layer Of Supersoft Pu Foam With Density 32 ± 2 Kg / Cu. Seat Should Be Upholstered With Fabric Or Leatherette. 2 ) Back Foam: The Back Should Be Made Of Pu Foam With Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg / Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructure Should Be Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood ( Which Also Shall Be Resistance And Termite Proof As Per Is:303. ) And Pinewood Of Cross Section Deviod Of Major Knots And Surface Defects 6 Nos. Per Seat And 3.8Mm Dia. Zigzag Spring Assembly Is Mounted Over Understrucrure For Cushioning Effect. It Should Be A Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate With Plastic Endcap. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 10 / Each 10 1.09 Overall Size Of 2 - Door Plu + Lkr ( Base ) Shall Be 380Mm ( W ) X450mm ( D ) X 1830 Mm ( H ) . Dmx Drg.- Pl 13-A4-33797, R1 - 4 Sheets ( Cam Lock ) Dmx Drg.- Pl-13-A4-36467, R1-4 Sheets ( Hasp. ) Stackability Shall Have Add - On Units That Can Be Stacked Width Wise To Form Bank Of Lockers Having Common Side Panel. Locking Shall Have 10 Lever Cam Lock With Lock Lever Plus Option Of Hasp Arrangement . Material Shall Be Crca 0.6 Mm Thickness . Construction Shall Be Rigid Knockdown Construction , Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum . Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns . Handle / Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle . Ventilation Shall Be Attractive Punched Pattern For Ventilation . 1 Hanging Rod In Both Compartment . The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 1 / Each 11 1.1 Providing And Placing In Position Visitors. The Cushioned Seats Shall Be Made Of Injection Moulded Plastic Outer And Inner. Plastic Inner Shall Be Upholstered With Pure Leather And Moulded High Resiliance Polyurethane Foamof Density = 45±2 Kg / M³, And Hardness Load 16±2 Kgf As Per Is:7888 For 25% Of Compression. Seat Size Shall Be 47.6 Cm W X 49.2 Cm D. The Back Shall Be Cushioned And Shall Be Made Up Of Pu Foam With Insitu Moulded Ms Erw Round Tube Of Size 1.9±0.03 Cm X 0.16±0.0128 Cm, Upholstered With Pure Leather. Back Size Shall Be 47.5 Cm W X 77 Cm D. The Tubular Frame Shall Be Cantilever Type And Made Of Ø2.54±0.03 Cm X 0.2±0.016 Cm Thick Ss 202 Tube. The Back Shall Be Connected To The Frame Through Chrome Plated High Pressure Die Cast Connector Piece. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 24 / Each 12 1.11 Providing And Placing Main Table. Overall Size Of Table 2100 W X 2250 D X 750 H. The Table Shall Be Made Of 25 Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Eru Top Shall Be Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Modesty Panel Shall Be Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Shall Be Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. The Pedestal Shall Be Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Shall Be Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Shall Have A Soft Closing & Anti Slam Mechanism. Handles Shall Be Provided For Ease Of Opening. Pedestals Shall Be Provided With Lock For Security. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 6 / Each 13 1.12 Foot Rest Dimensions- 445W X 295D Having Aiota Certificate. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 6 / Each 14 1.13 Providing And Placing In Position Visitors. The Cushioned Seats Shall Be Made Of Injection Moulded Plastic Outer And Inner. Plastic Inner Shall Be Upholstered With Pure Leather And Moulded High Resiliance Polyurethane Foamof Density = 45±2 Kg / M³, And Hardness Load 16±2 Kgf As Per Is:7888 For 25% Of Compression. Seat Size Shall Be 47.6 Cm W X 49.2 Cm D. The Back Shall Be Cushioned And Shall Be Made Up Of Pu Foam With Insitu Moulded Ms Erw Round Tube Of Size 1.9±0.03 Cm X 0.16±0.0128 Cm, Upholstered With Pure Leather. Back Size Shall Be 47.5 Cm W X 77 Cm D. The Tubular Frame Shall Be Cantilever Type And Made Of Ø2.54±0.03 Cm X 0.2±0.016 Cm Thick Ss 202 Tube. The Back Shall Be Connected To The Frame Through Chrome Plated High Pressure Die Cast Connector Piece. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 12 / Each 15 1.14 Storwel M3 Shall Have An Overall Size Of 916Mm ( W ) X486mm ( D ) X1980mm ( H ) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm ( High Yield Strength ) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . Plenty Of Colour Options And Shelving Options Shall Be Available. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 6 / Each 16 1.15 Storwel Plain Shall Have An Overall Size Of 916Mm ( W ) X486mm ( D ) X1980mm ( H ) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm ( High Yield Strength ) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . Plenty Of Colour Options And Shelving Options Shall Be Available. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 2 / Each 17 1.16 The Cushioned Seat Assembly Shall Consists Of Seat Outer ( Material-30% Glass Fiber Nylon ) And Upholstered Seat Inner ( Material-Polypropylene ) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) And Back Inner ( Material-Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be ( W ) -46.5Cm, ( H ) -60.0Cm & Size Of Seat Shall Be ( W ) -51.0Cm X ( D ) -49.0 Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height ( 6+ / -0.5Cm ) And Depth ( 6+ / -0.5Cm ) . Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanism Shall Be Active Biosynchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat / Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Product Should Be Bifma Certified. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 + / - 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 + / - 0.5 Cm Pitch-Centre-Dia ( 75.0 + / - 1.0 Cm With Castors ) . The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine ( Material-Glass Fiber Filled Nylon ) Which Is Fixed To Aluminium Back Spine. The Neckrest Assembly Consists Of Upholstered Neckrest Inner ( Material-Poly Propylene ) With Moulded Polyurethane Foam And Polyster Fabric. Upholstered Inner Shall Be Fixed To Neck Rest Cover. Neckrest Shall Be Fixed To Back Assembly Through Neckrest Spline. Overall Dimensions Of Chair Shall Be, Width Of Chair - 75.0Cm, Depth Of Chair - 75.0 Cm As Measured From Pedestal Below. Height From Ground - Min 109.3 To Max 124.4 Cm. Seat Height - Min 45.5Cm To Max 55.5Cm. Dimensions Tolerance / Variations Shall Be Within + / - 1 Cm. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 3 / Each 18 1.17 The Cushioned Seat Assembly Shall Consists Of Seat Outer ( Material-30% Glass Fiber Nylon ) And Upholstered Seat Inner ( Material-Polypropylene ) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) And Back Inner ( Material-Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be ( W ) -46.5Cm, ( H ) -60.0Cm & Size Of Seat Shall Be ( W ) -51.0Cm X ( D ) -49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armrest Is Having Two Adjustment, Height ( 6+ / -0.5Cm ) And Depth ( 6+ / -0.5Cm ) . Height Adjustment Shall Be Provided In Aluminium Structure Of Armrest Which Is Connected To Aluminium Back Spine And Is Operated With Button. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Mechanim Shall Be Active Bio Synchro Mechanism. The Mechanism Of Chair Shall Have Following Features:360 Degree Revolving Type, Seat / Back Tilt Ratio Of 1:2, Active Bio-Synchro Mechanism, 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Front-Pivot For Tilt With Feet Resting On Ground And Continious Lumber Support Should Ensure More Comfort. The Mechanism Housing Should Made Up Of Hpdc Aluminium And Black Powder Coated. The Chair Shall Be Provided With Pneumatic Height Adjustment Which Shall Have Stroke Of 10.0 + / - 0.3 Cm. The Pedestal Shall Be Made Of Die-Cast Polished Aluminium. It Shall Be Fitted With 5 Nos Twin Wheel Castor. The Size Of The Pedestal Shall Be 65.0 + / - 0.5 Cm Pitch-Centre-Dia ( 75.0 + / - 1.0 Cm With Castors ) . The Twin Wheel Castors Shall Be Injection Moulded In Black Polypropylene. The Lumbar Support Assembly Should Consists Of Lumber Spine ( Materialglass Fiber Filled Nylon ) Which Is Fixed To Aluminium Back Spine. Overall Dimensions Of Chair Shall Be, Width Of Chair - 70.5Cm, Depth Of Chair - 70.5 Cm As Measured From Pedestal Below. Height From Ground - 99 Cm. Seat Height - 49 Cm. Dimensions Tolerance / Variations Shall Be Within + / - 1 Cm. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 27 / Each 19 1.18 The Cushioned Seat Assembly Shall Consists Of Seat Outer ( Material-30% Glass Fiber Nylon ) And Upholstered Seat Inner ( Material-Polypropylene ) With Moulded Polyurethane Foam And Polyster Fabric. The Net Back Should Made Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) And Back Inner ( Material-Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Size Of Back Shall Be ( W ) -46.5Cm, ( H ) -60.0Cm & Size Of Seat Shall Be ( W ) -51.0Cm X ( D ) -49.0Cm. The Supprot Spine Should Made Up Of High Pressure Die Cast Polished Aluminium. Armtop Is Made Up Of Pu Molded Over Plastic Inner. The Lumbar Support Assembly Should Consists Of Lumber Spine ( Material-Glass Fiber Filled Nylon ) Which Is Fixed To Aluminium Back Spine. Overall Dimensions Of Chair Shall Be, Width Of Chair - 70.5Cm, Depth Of Chair - 70.5 Cm As Measured From Pedestal Below. Height From Ground - 99.0Cm. Seat Height -49.0Cm. Dimensions Tolerance / Variations Shall Be Within + / - 1 Cm. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 25 / Each 20 1.19 Section 1 Nit Consists Of Storage Units 457 Mm Deep– Fixed Or Movable – Bolted To Undercarriage Which Rolls Onto The Channels, Which, Are Firmly Fixed To The Ground. Each Of Above Configurations Can Have Following Type Of Blocks – 1. Single Static ( Ss ) 2. Single Last ( Sl ) 3. Twin Mobile ( Tm ) – 2 Body Back To Back. Construction Shall Be Made Out Of 0.8 Thk. Crca Steel Conforming To Is: 513 Gr.D. Each Body Block ( Ss / Sl / Tm ) Building Consists Of 1 Main Unit & Then Add-On Units ( 0, 1, 2, 3, 4 - Depending On No. Of Bays 1, 2, 3, 4 & 5 ) . Each Unit Has 5 Loading Levels Formed By 4 Nos. Adjustable Shelves. Body Units Are Bolted To Undercarriage. Optimizer Height From Ground Is 2080 Mm ( 1980 Body + 65 Under-Structure + 35 Channel System ) . Width Shall Be 915Mm. The Bodies Including Shelves Are Given Anti-Rust Surface Treatment & Are Powder Coated With Epoxy Polyester Powder. Final Finishing Is Done By A Dry Film Thickness Of Minimum 45 ( + - 5 ) Microns. Shelves Are Having 10 Bends & Its Max Load Bearing Capacity Is 80 Kg Uniformly Distributed Per Shelf. The Undercarriage Is A Welded Frame Made Of Hr Sheet 2 & 3.15 Mm Thk Conforming To Is:1079 Suitably Fabricated To Take The Loads Based On Configuration. The Movement Of Units Is Achieved Mechanically Through A Pu Drive Wheel And Sprocket-Chain-Tensioner Arrangement Mounted Rigidly Onto Body Side. The Torque From Hand Wheel Is Transfer To Drive Shaft Via Sprocket Chain Arrangement. , Each Movable Undercarriage Is Provided With 3 Rollers On The Shaft For Driving, 3 Anti-Friction Ball Bearings For Rolling And 4 Anti-Friction Ball Bearings For Guiding Between Rails. A Centralized Locking Arrangement Is Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. The Nuts & Bolts Are Galvanized / Blackodized / Zn Plated. It Consists Of J Section 2 Mm Thk Hr Sheet & 25 Mm Square Bright Bar - Both Connected By Screws.Section 2 N8. Movements Of The System: 8.1. Push-Pull Configuration ( Type-P1 / Type-P2 ) : Movement Of Units Achieved By Pushing Or Pulling Chrome Plated C Handle Fitted Onto 1.6 Mm Thk Plate ( Mounted On Each Double & Single Movable Units ) & Rigidly Fixed At Suitable Height On Body Side. Each Movable Undercarriage Has 4 Nos. Of Anti-Friction Ball Bearings For Rolling Onto Channels & 4 Nos. Of Anti-Friction Ball Bearings For Guiding Between Channels & J Section. N8.2. Drive Type Configuration ( Type D2 / Type D3 / Type D4 / Type D5 ) : The Movement Of Units Is Achieved Mechanically Through A Pu Drive Wheel And Sprocket-Chain-Tensioner Arrangement Mounted Rigidly Onto Body Side. The Torque From Hand Wheel Is Transfer To Drive Shaft Via Sprocket Chain Arrangement. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. N 1 / Each 21 1.2 Over All Outer Dimension Should Be ( L ) 2025 X ( W ) 774 X ( H ) 550Mm. Head Board And Foot Board Should Have Curved Profile At The Top Made Of Ms Erw Round Tubes Of Thickness 1.6Mm & Dia 31.75 Mm. Head Board And Leg Board Is Further Strengthned By 3 Vertical Pipes Each Of Thickness 1.2 Mm And Dia Of 19Mm & 1 Each Horizontal Pipe Of Thickness 1.2Mm And Dia Of 25.4Mm Of Equal Height. Lying Surface Should Be Made Of 8 Bend Panel Of Crca Sheet Of Thickness Of 1 Mm. This 8 Bend Panel Should Be Further Strengthned On The Longetudienly Edges By Welding Full Length With The Help Of C Shaped Metal Channel Section. Middle Of 8 Bend Panel Should Be Strengthned By 5 L Shapped Stiffners. It Should Be Strengthned By Trapizodal Contour ( Rounded Corner ) 10 Nos, Embossed Cut Out. All Metal Components Should Be Pre Treated With Zinc Phosphating And Then Powder Coated With Epoxy Polyster Powder Coating. Goods Should Be Supplied In Knocked Down Construction To Reduce Carbon Emission. To Ensure Qood Quality Welding Co2 Argon Process Should Be Adhered To. Neoprene Rubber With Reinforced Metalwasher Should Be Used For Leg Shoes. Head Board And Leg Board Are Connected To Mattress Platform Thru L Bracket At 4 Corners To Ensure Rigidity, With The Help Of Zinc Plated Screws. All Metal Components Should Be Pre Treated With Zinc Phosphating In 9 Tank Porcess And Then Powder Coated With Anti Microbial Epoxy Polyster Powder Coating. The Manufacturer Should Compilant With Iso 9001, 14001, Ohsas 1800 And Ce Certification. Maximum Safe Working Load Must Be 135 Kg. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 1 / Each 22 1.21 ( L ) 1980* ( W ) 700* ( H ) 100 The Bed Should Be Provided With 40 Density 100 Mm Thick Single Section Pu Foam Mattress Which Should Be Covered By Heavy Helium Material Which Is Water Proof, Flame Retardant, Vapour & X-Ray Permeable. The Zip & Stiches For The Mattress Cover Should Be Concealed. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 1 / Each 23 1.22 Overall Size:Width - 2050.0 Mm Depth - 973.0 Mm Height - 720.0 Mm Material:Headboard Panels Are Made Of 18 Mm Thick Prelaminated Particle Board. All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding.Bed Leg Frame Structure Consist Of Metal Frames Made Of M.S. 50 X 25 Mm Box Section In 1.2 Thickness Internal Pipes Made Of 19 X 19 Mm Box Section In 0.9 Mm Thickness. Headboard Pipes Are Made Of 25 X 25 Mm Box Section In 0.9 Mm Thickness. Mattress Holding Bkt Is Made Of 0.6 Mm Crca Sheet Mattress Frame Sheetmetal Top Is Made Of 1 Mm Crca Sheet. Hardware:The High Quality Hardware Used. Construction:Knock Down Construction.Packets: 1 Packet. Finish:18 Mm Thick Prelaminated Particle Board Is In 4501, Make — Godrej ( Shirval ) .Bed Leg Frame Structure Are Powder Coated In Shade : Matt Taupe White. Ref No. 9001904 To Thickness Of 50 Microns ( +-10 ) . Mattress Frame Structure Are Powder Coated In Shade : Epp Fr Tex. Milky White 20K, Ref No. 9003456 To Thickness Of 50 Microns ( +-10 ) . Rest All Metals Are Powder Coated In Shade : S / G Charbrown. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 2 / Each 24 1.23 Chair Seat- Back Seat Back Is Made Of Blow Molded High-Density Polyethylene Andis Fixed On The Understructure Assembly With The Help Of Stainless Steel Pop Rivets.Seat: Seat Is Made Of Blow Molded Highdensity Polyethylene And Is Fixed On The Understructure Assembly. Understructure All Side Metal Frames And Cross Connectors Are Made From Mild Steel Erw Tubes , 40 X 20 X 2Mm Thk ( Approx. 14 Swg ) As Per 1S:7138 Which Are Welded Togetherthe Welded Structures And Cross Connectors Are Coated With Min 45 Micron Thickness Of Epoxy Polyester Coating. Bag Storage Tray Made Of 04 Mild Steel Rod ( As Per 15:432 ) Forms A Cage At The Bottom And Is Welded To The Main Understructure. The Product Must Have Greenguard Gold Certificate By Bifma Certified Agency. Seat Support Channel Made Of 1Mm Thk Mild Steel Sheet ( As Per Is:513 ) Is Welded To The Understructure For Fixing Seat. Plastic Caps Plastic Caps Made Of Polypropylene Are Provided On The Foot Rest Side Tubes And Back Leg Tubes Adding More Aestheic Value To The Product. Desk-Top Panel -Wooden Top Panel Is Made From 18Mm Thk Pre-Laminated Twin Board With Polypropylene Injection Molded Edges.The Panels Have Corners Rounded For Safety Usage. The Design Of Desk-Top Is Such That There Is Provision For Pen / Pencil Storage Also Modestry Panel Tray Assembly Modesty Panel Tray Assembly Is Made Of 1 Mm Thk Mild Steel Sheet ( As Per Is: 513 ) Welded Structure . The Assembly Is Powder Coadted With Min 45 Micron Thickness Of Epoxy Polyster Coating Modesty Panel : Mondesty Panel Is Made Of Blow Molded Hing - Density Polyethylene And Is Fixed On The Mondesty Panel Tray Assembly Plastic Storage Tray -The Plastic Storage Tray Is Made Of Polypropylene And Is Fixed Beneath The Desktop On The Metal Understructure. Plastic Hinge The Plastic Hinges Made Of Polypropylene Are Fixed Beneath The Desktop On Front Side For Lifting The Top To Access The Storage Below. All Side Metal Frames And Cross Connectors Are Made From Mild Steel Erw Tubes , 40 X 20 X 2Mm Thk ( Approx. 14 Swg ) As Per 15:7138 Which Are Welded Together.The Welded Structures And Cross Connectors Are Coated With Min 45 Micron Thickness Of Epoxy Polyester Coating.Shelf Tray And Desktop Mounting Brackets Made Of 2Mm Thk Mild Steel Sheet ( As Per 15:513 ) Are Welded To The Understructure For Fixing Shelf Tray And Desktop Respectively. Hooks Are Provided Ori The Vertical Side Frames On Both Sides Of The Desk For Hanging Bags / Bottles. They Are Made From 09 Mild Steelrod ( As Per 15:432 ) And Are Welded To The Main Understructure. The Item Should Be Of Make Godrej, Wipro, Methodex, Geekan, Space Wood Only. 10 / Each

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	13-Apr-2021	Date extend	Date	26-04-2021
2	24-Apr-2021	Date extended	Date	29-04-2021

INR 5000 /-

INR 161076.0 /-

INR 80.54 Lakhs /-

Name of Work: Procurement of furniture for Judicial Court at Bilaspur in Yamuna Nagar.
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Works Details	BI01010001010000000000000515BI0100001112
2	1.01	4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		12	/ Each
3	1.02	The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm). The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		53	/ Each
4	1.03	The seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 47.5 cm(W) x 58.0 cm(H) and of seat shall be 47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. Overall Dimensions of Chair shall be Seat Height - 46.5cm, Height - 89.5cm, Width & Depth of Chair as measured from pedestal - Width-61.4 cm and Depth-64.5 cm. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		87	/ Each
5	1.04	Supplying and placing in position Conference table of the following specifications. Conference Table With Wire Manager size shall be Single seater 760 Width mm x 600 Depth mm , Two seater 1360 Width mm x 600 Depth mm , Half Round (2 Seater ) R 713 + Quarter Round ( 1 Seater ) R 713 . The top shall be 30.8 mm thick (18 mm + 12 mm + osr mdf + MEMBRANE ON TOP ). Edge Profile shall be waterfall edge 10 mm radius on top edge and 5 mm at bottom . In Understructure the Legs shall be made from 25 mm PPB having a straight profile with half round edges and clad with 0.6 mm thick post Forming laminate . Overall thickness of leg shall be 26.2 mm The modesty panel in understructure shall be mae from PLT ( Pre laminated twin) boards of 18 mm thick . There shall be Wire Management wire carrier shall be made from 0.6 mm thick CRCA painted and carrier cover shall be made of 12 mm thick MDF painted all over. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		1	/ Each
6	1.05	The seat shell shall be a welded assembly of seat,back and side frame. The seat and back shall be made of 0.12±0.013cm thk CR steel sheet with oblong perforations.They shall be welded to sideframe of size 32 Mm x 5 mm thk HR steel. The welded assembly shall be powder coated ( DFT 40-60 microns). The seat shall has a front water fall edge to provide popliteal clearance for comfortable seating. It also shall has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back shall aids in easy maintenance. The dimensions of seat shall be 47.8 cm (W) x 44.6 cm (D) and of back shall be 41.6 cm (W) x 23. cm (H). Understructure assembly shall consists of connecting beam and leg assembly made of M.S.E.R.W. oblong tube of size 75 mm x 50 mm x 2 mm thk.The welded structure assembly shall be powder coated (DFT 40-60 microns ).The leg assembly shall be fitted with shoes and levellers in Nylon. The leg structure shall be designed with minimal area of contact close to ground providing easy access for cleaning purposes. The shoes fiited to leg assembly shall help in aligning the structure for back to back arrangements. Levelers should take care of uneven flooring .Connecting beam shall be fitted with snap locking end cap.It also aids in side-by-side understructure alignment. Armrest assembly shall consists of armrest frame and armrest pad. The armrest frame shall be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it shall be powder coated (DFT 40-60 microns). Armrest pad shall be injection molded in Nylon and shall be fitted onto the armrest frame. Overall Dimensions shall be Seat Height - 44.1 cm, Height - 78.5 cm, Width & Depth of Chair as measured from pedestal - Width-169.5cm and Depth-63.8 cm. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		98	/ Each
7	1.06	Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		8	/ Each
8	1.07	Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		6	/ Each
9	1.08	Supplying and Placing in place of 5 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		10	/ Each
10	1.09	Overall size of 2 - Door PLU + Lkr (Base) shall be 380mm (W)x450mm (D) x 1830 mm (H). DMX Drg.- PL 13-A4-33797,R1 - 4 Sheets(Cam Lock) DMX Drg.- PL-13-A4-36467,R1-4 Sheets(Hasp.) Stackability shall have add - on units that can be stacked width wise to form bank of lockers having common side panel. Locking shall have 10 Lever cam lock with lock lever plus option of hasp arrangement . Material shall be CRCA 0.6 mm thickness . Construction shall be Rigid Knockdown construction , shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Handle/Label holder shall be Aesthetically appealing Snap fit ABS plastic handle . Ventilation shall be attractive punched pattern for ventilation . 1 Hanging rod in both compartment . The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		1	/ Each
11	1.1	Providing and Placing in position Visitors. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The tubular frame shall be cantilever type and made of Ø2.54±0.03 cm x 0.2±0.016 cm thick SS 202 tube. The back shall be connected to the frame through chrome plated high pressure die cast connector piece. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		24	/ Each
12	1.11	Providing and Placing Main table. Overall size of table 2100 W x 2250 D x 750 H. The table shall be made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure shall be made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. The pedestal shall be made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. Drawer fronts shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers shall have a soft closing & anti slam mechanism. Handles shall be provided for ease of opening. Pedestals shall be provided with lock for security. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		6	/ Each
13	1.12	Foot Rest Dimensions- 445W X 295D Having AIOTA Certificate. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		6	/ Each
14	1.13	Providing and Placing in position Visitors. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The tubular frame shall be cantilever type and made of Ø2.54±0.03 cm x 0.2±0.016 cm thick SS 202 tube. The back shall be connected to the frame through chrome plated high pressure die cast connector piece. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		12	/ Each
15	1.14	Storwel M3 shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		6	/ Each
16	1.15	Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		2	/ Each
17	1.16	The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0 cm. The supprot spine should made up of high pressure die cast polished aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is operated with button. Armtop is made up of PU molded over plastic inner. The mechanism shall be Active BioSynchro Mechanism. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Active Bio-Synchro mechanism, 5 position tilt limiter giving option of variable tilt angle to the chair. Product should be BIFMA Certified. Front-Pivot for tilt with feet resting on ground and continious lumber support should ensure more comfort. The mechanism housing should made up of HPDC Aluminium and black powder coated. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. The neckrest assembly consists of upholstered neckrest inner (material-poly propylene) with moulded polyurethane foam and polyster fabric. upholstered inner shall be fixed to neck rest cover. neckrest shall be fixed to back assembly through neckrest spline. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below. Height from ground - min 109.3 to max 124.4 cm. Seat height - min 45.5cm to max 55.5cm. Dimensions tolerance / variations shall be within +/- 1 cm. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		3	/ Each
18	1.17	The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is operated with button. Armtop is made up of PU molded over plastic inner. The mechanim shall be Active Bio Synchro Mechanism. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Active Bio-Synchro mechanism, 5 position tilt limiter giving option of variable tilt angle to the chair. Front-Pivot for tilt with feet resting on ground and continious lumber support should ensure more comfort. The mechanism housing should made up of HPDC Aluminium and black powder coated. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The lumbar support assembly should consists of lumber spine(materialglass fiber filled nylon) which is fixed to Aluminium back spine. Overall dimensions of Chair shall be, Width of Chair - 70.5cm, Depth of Chair - 70.5 cm as measured from pedestal below. Height from ground - 99 cm. Seat height - 49 cm. Dimensions tolerance / variations shall be within +/- 1 cm. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		27	/ Each
19	1.18	The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armtop is made up of PU molded over plastic inner. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. Overall dimensions of Chair shall be, Width of Chair - 70.5cm, Depth of Chair - 70.5 cm as measured from pedestal below. Height from ground - 99.0cm. Seat height -49.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		25	/ Each
20	1.19	Section 1\nIt consists of storage units 457 mm deep– fixed or movable – bolted to Undercarriage which rolls onto the channels, which, are firmly fixed to the ground. Each of above configurations can have following type of blocks – 1. Single Static (SS) 2. Single Last (SL) 3. Twin Mobile(TM) – 2 body back to back. Construction shall be made out of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block (SS/SL/TM) building consists of 1 Main unit & then Add-on units (0, 1, 2, 3, 4 - depending on no. of bays 1, 2, 3, 4 & 5). Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body units are bolted to undercarriage. Optimizer Height from ground is 2080 mm (1980 body + 65 under-structure + 35 channel system). Width shall be 915mm. The bodies including shelves are given anti-rust surface treatment & are powder coated with epoxy polyester powder. Final finishing is done by a Dry Film Thickness of minimum 45 (+\- 5) microns. Shelves are having 10 bends & its max load bearing capacity is 80 Kg uniformly distributed per shelf. The Undercarriage is a welded frame made of HR sheet 2 & 3.15 mm thk conforming to IS:1079 suitably fabricated to take the loads based on configuration. The movement of units is achieved mechanically through a PU Drive wheel and 'Sprocket-Chain-Tensioner' arrangement mounted rigidly onto body side. The torque from hand wheel is transfer to drive shaft via sprocket chain arrangement. , each movable undercarriage is provided with 3 rollers on the shaft for driving, 3 anti-friction ball bearings for rolling and 4 anti-friction ball bearings for guiding between rails. A Centralized locking arrangement is provided through Locking Stiffener mounted onto back of Single Last unit so that it gets locked on channels when all the units are brought together. The nuts & bolts are galvanized / blackodized / Zn Plated. It consists of 'J' section 2 mm thk HR sheet & 25 mm Square bright bar - both connected by screws.Section 2 \n8. Movements of the System: 8.1. Push-Pull Configuration (TYPE-P1/TYPE-P2): Movement of units achieved by pushing or pulling Chrome plated 'C' handle fitted onto 1.6 mm thk plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side. Each movable undercarriage has 4 nos. of anti-friction ball bearings for rolling onto channels & 4 nos. of anti-friction ball bearings for guiding between channels & 'J' section. \n8.2. Drive Type Configuration (Type D2 / Type D3 / Type D4 / Type D5): The movement of units is achieved mechanically through a PU Drive wheel and 'Sprocket-Chain-Tensioner' arrangement mounted rigidly onto body side. The torque from hand wheel is transfer to drive shaft via sprocket chain arrangement. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.\n		1	/ Each
21	1.2	Over all outer dimension should be (L) 2025 x (W)774 x (H) 550mm. Head board and foot board should have curved profile at the top made of MS ERW round tubes of thickness 1.6mm & dia 31.75 mm. Head board and leg board is further strengthned by 3 vertical pipes each of thickness 1.2 mm and dia of 19mm & 1 each Horizontal pipe of thickness 1.2mm and dia of 25.4mm of equal height. Lying surface should be made of 8 bend panel of CRCA sheet of thickness of 1 mm. This 8 bend panel should be further strengthned on the longetudienly edges by welding full length with the help of C shaped metal channel section. Middle of 8 bend panel should be strengthned by 5 L shapped stiffners. It should be strengthned by trapizodal contour (rounded corner) 10 nos, embossed cut out. All metal components should be pre treated with zinc phosphating and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction to reduce carbon emission. To ensure qood quality welding " Co2 Argon" process should be adhered to. Neoprene rubber with reinforced metalwasher should be used for leg shoes. Head board and leg board are connected to mattress platform thru L bracket at 4 corners to ensure rigidity, with the help of zinc plated screws. All metal components should be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbial epoxy polyster powder coating. The manufacturer should compilant with ISO 9001, 14001, OHSAS 1800 and CE certification. Maximum safe working load must be 135 kg. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		1	/ Each
22	1.21	(L)1980*(W)700*(H)100 The bed should be provided with 40 density 100 mm thick Single section PU foam mattress which should be covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stiches for the mattress cover should be concealed. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		1	/ Each
23	1.22	Overall Size:Width - 2050.0 mm Depth - 973.0 mm Height - 720.0 mm Material:Headboard panels are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding.Bed leg frame structure consist of metal frames made of M.S. 50 x 25 mm box section in 1.2 thickness Internal Pipes made of 19 x 19 mm box section in 0.9 mm thickness. Headboard pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress holding bkt is made of 0.6 mm CRCA SHEET Mattress frame sheetmetal top is made of 1 mm CRCA SHEET. Hardware:The high quality hardware used. Construction:Knock Down construction.Packets: 1 packet. Finish:18 mm thick Prelaminated Particle Board is in 4501, make — GODREJ (SHIRVAL).Bed leg frame structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904 to thickness of 50 microns (+-10). Mattress frame structure are powder coated in shade : EPP FR TEX. MILKY WHITE 20K, REF NO. 9003456 to thickness of 50 microns (+-10). Rest all metals are powder coated in shade : S/G CHARBROWN. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		2	/ Each
24	1.23	Chair Seat- Back Seat back is made of blow molded High-density polyethylene andis fixed on the understructure assembly with the help of Stainless steel pop rivets.Seat: Seat is made of blow molded Highdensity polyethylene and is fixed on the understructure assembly. Understructure All side metal frames and cross connectors are made from Mild steel ERW tubes ,40 x 20 x 2mm thk(approx. 14 SWG) as per 1S:7138 which are welded togetherThe Welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. Bag storage tray made of 04 Mild steel rod (as per 15:432) forms a cage at the bottom and is welded to the main understructure. The product must have GreenGuard Gold certificate by BIFMA certified agency. Seat support channel made of 1mm thk Mild steel sheet (as per IS:513) is welded to the understructure for fixing seat. Plastic Caps Plastic Caps made of Polypropylene are provided on the foot rest side tubes and back leg tubes adding more aestheic value to the product. Desk-Top Panel -Wooden top panel is made from 18mm thk Pre-laminated twin board with polypropylene injection molded edges.The panels have corners rounded for safety usage. The design of desk-top is such that there is provision for pen/pencil storage also Modestry Panel Tray Assembly Modesty panel tray assembly is made of 1 mm thk mild steel sheet (as per IS: 513) welded structure . The assembly is powder coadted with min 45 micron thickness of epoxy polyster coating Modesty Panel : Mondesty Panel is made of blow molded hing - density polyethylene and is fixed on the mondesty panel tray assembly Plastic Storage Tray -The plastic storage tray is made of Polypropylene and is fixed beneath the desktop on the metal understructure. Plastic Hinge The plastic hinges made of Polypropylene are fixed beneath the desktop on front side for lifting the top to access the storage below. All side metal frames and cross connectors are made from Mild steel ERW tubes ,40 x 20 x 2mm thk(approx. 14 SWG) as per 15:7138 which are welded together.The Welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating.Shelf tray and desktop mounting brackets made of 2mm thk Mild steel sheet(as per 15:513) are welded to the understructure for fixing shelf tray and desktop respectively. Hooks are provided ori the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 09 Mild steelrod (As per 15:432) and are welded to the main understructure. The item should be of make Godrej, Wipro, Methodex, Geekan, Space wood only.		10	/ Each