Rehabilitation Of Executive Hostel Near Hrd Dishergarh Under Tad , Ecl Hq
Tender Value
88.04 Lakhs
Estimated cost
Bid Submission
15 Apr 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
DISHERGARH → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Rehabilitation Of Executive Hostel Near Hrd Dishergarh Under Tad , Ecl Hq
BOQ
| Name of Work: Rehabilitation of Executive Hostel near HRD Dishergarh under TAD, ECL HQ . NIT NO.- ECL/HQ/GM(C)/e-Tender/20-21/72 dated 25.03.2021 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Part-\"A\" Based on CPWD Analysis | |||
| 2 | 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. | 500 | % Sqm | |
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 12 | Cum | |
| 4 | 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | 2 | Cum | |
| 5 | 5 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform | 25 | Sqm | |
| 6 | 6 | Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) | 20 | Sqm | |
| 7 | 7 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). | 3 | Cum | |
| 8 | 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars | 150 | Kg | |
| 9 | 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars | 250 | Kg | |
| 10 | 10 | Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand) | 3 | Cum | |
| 11 | 11 | Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) of class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand) | 20 | Sqm | |
| 12 | 12 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm | 25 | Sqm | |
| 13 | 13 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm | 6 | Sqm | |
| 14 | 14 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work | 50 | Mtr | |
| 15 | 15 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 40 | Sqm | |
| 16 | 16 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws | 32 | Sqm | |
| 17 | 17 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 20 mm dia (heavy type) | 100 | Mtr | |
| 18 | 18 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | 1000 | Kg | |
| 19 | 19 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 100x58x1.90 mm | 60 | Each | |
| 20 | 20 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm | 20 | Each | |
| 21 | 21 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm | 40 | Each | |
| 22 | 22 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm | 40 | Each | |
| 23 | 23 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 75x50x2.50 mm | 60 | Each | |
| 24 | 24 | Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 150 mm | 20 | Each | |
| 25 | 25 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm | 40 | Each | |
| 26 | 26 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | 20 | Each | |
| 27 | 27 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge. | 100 | Mtr | |
| 28 | 28 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters | 34 | Sqm | |
| 29 | 29 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 12mm thick commercial ply conforming to IS : 1328 BWR type | 25 | Sqm | |
| 30 | 30 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 200 | Kg | |
| 31 | 31 | Welding by gas or electric plant including transportation of plant at site etc. complete. | 2000 | CM | |
| 32 | 32 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | 10 | Sqm | |
| 33 | 33 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Raj Nagar plain | 3.75 | Sqm | |
| 34 | 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 379.69 | Sqm | |
| 35 | 35 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | 64.12 | Sqm | |
| 36 | 36 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints with white cement and matching pigment. Size of Tile 600x600 mm | 113.86 | Sqm | |
| 37 | 37 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints with white cement and matching pigment. Size of Tile 600x600 mm | 455.439 | Sqm | |
| 38 | 38 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter | 25 | Mtr | |
| 39 | 39 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter | 120 | Mtr | |
| 40 | 40 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm | 5 | Each | |
| 41 | 41 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm | 25 | Each | |
| 42 | 42 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm | 5 | Each | |
| 43 | 43 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm | 10 | Each | |
| 44 | 44 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend | 5 | Each | |
| 45 | 45 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend | 25 | Each | |
| 46 | 46 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 75 mm Shoe | 5 | Each | |
| 47 | 47 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 11o mm Shoe | 25 | Each | |
| 48 | 48 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm | 20 | Each | |
| 49 | 49 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm | 60 | Each | |
| 50 | 50 | Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : With residual type petroleum bitumen of grade VG - 10 | 700 | Sqm | |
| 51 | 51 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 50 | Sqm | |
| 52 | 52 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) | 100 | Sqm | |
| 53 | 53 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) | 500 | Sqm | |
| 54 | 54 | Neat Cement Punning | 100 | Sqm | |
| 55 | 55 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer | 2421.72 | Sqm | |
| 56 | 56 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 2421.72 | Sqm | |
| 57 | 57 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | 2159.31 | Sqm | |
| 58 | 58 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 180.915 | Sqm | |
| 59 | 59 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 4581.03 | Sqm | |
| 60 | 60 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 2000 | Sqm | |
| 61 | 61 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 2200 | Sqm | |
| 62 | 62 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work | 50 | Sqm | |
| 63 | 63 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 3 | Cum | |
| 64 | 64 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer - in -charge. | 25 | Sqm | |
| 65 | 65 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar | 2 | Cum | |
| 66 | 66 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below | 110 | Each | |
| 67 | 67 | Taking out doors, windows and clerestory window shutters (steel orwood) including stacking within 50 metres lead :\n Of area 3 sq. metres and below | 20 | Each | |
| 68 | 68 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. | 150 | Kg | |
| 69 | 69 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm | 375.9 | Sqm | |
| 70 | 70 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe | 35 | Mtr | |
| 71 | 71 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe | 140 | Mtr | |
| 72 | 72 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore | 105 | Mtr | |
| 73 | 73 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 500 | Sqm | |
| 74 | 74 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | 20 | Each | |
| 75 | 75 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 200 mm | 1 | Each | |
| 76 | 76 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 630x450 mm | 20 | Each | |
| 77 | 77 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 550x400 mm | 2 | Each | |
| 78 | 78 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia | 23 | Each | |
| 79 | 79 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia | 2 | Each | |
| 80 | 80 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 22 | Each | |
| 81 | 81 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | 22 | Each | |
| 82 | 82 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes | 160 | Mtr | |
| 83 | 83 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore | 2 | Each | |
| 84 | 84 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore | 102 | Each | |
| 85 | 85 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 3000 | Per Litre | |
| 86 | 86 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440 gms | 3 | Each | |
| 87 | 87 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) | 850 | Kg | |
| 88 | 88 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) | 1100 | Kg | |
| 89 | 89 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness | 180 | Sqm | |
| 90 | 90 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). | 6.71 | Sqm | |
| 91 | 91 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4\ngraded stone aggregate 20 mm nominal size) | 35 | Cum | |
| 92 | 92 | Supplying, Fitting and Fixing C.P. brass waste 32 mm | 20 | Each | |
| 93 | 93 | Supplying, Fitting and Fixing C.P. brass waste 40 mm | 3 | Each | |
| 94 | 94 | Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. | 10 | Kg | |
| 95 | 95 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | 22 | Each | |
| 96 | 96 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading | 79.12 | Sqm | |
| 97 | 97 | Part-\"B\" Based on PWD/17 SOR | |||
| 98 | 98 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia) 20mm | 50 | Mtr | |
| 99 | 99 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia) 25 mm | 50 | Mtr | |
| 100 | 100 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia) 40 mm | 18 | Mtr | |
| 101 | 101 | Supply and fixing of wheel valve 15 mm | 20 | Each | |
| 102 | 102 | Supply and fixing of wheel valve 20 mm | 5 | Each | |
| 103 | 103 | Cleaning silt of inspection pit. | 10 | Each | |
| 104 | 104 | Removing sludge from septic tank by methor labour including disposal of the same outside the compound as directed. (a) Upto 20 users:- (i) Within a lead of 150 metre | 2 | Each | |
| 105 | 105 | Removing chokage of H.C.I. or S.W. pipe with split bamboo. (a) Underground | 60 | Mtr | |
| 106 | 106 | Supplying, fitting and fixing shower of approved brand and make.Chromium plated round shower with revolving joint (ESSCO) | 20 | Each | |
| 107 | 107 | Supplying, fitting and fixing shower of approved brand and make. Chromium plated shower arm 240 mm long (Equivalent to Code No 536(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). | 20 | Each | |
| 108 | 108 | Supplying, fitting and fixing Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand) | 100 | Each | |
| 109 | 109 | Supplying, fitting and fixing C.P. Extension Pipe | 60 | Each | |
| 110 | 110 | CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand). | 20 | Each | |
| 111 | 111 | CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No. 5167(B) & Model - FLORENTINE of JAQUAR or similar brand). | 20 | Each | |
| 112 | 112 | Supplying, fitting and fixing pillar cock of approved make. CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent).\n\n | 2 | Each | |
| 113 | 113 | Supplying, fitting and fixing shower of approved brand and make. Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar).). | 20 | Each | |
| 114 | 114 | Supplying, fitting and fixing shower of approved brand and make. Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). | 20 | Each | |
| 115 | 115 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 Plain Floor Trap with Top tile & Strainer 75 mm | 20 | Each | |
| 116 | 116 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 Round Jali 75 mm | 20 | Each | |
| 117 | 117 | Supplying, fitting and fixing towel rail with two brackets C.P. over brass 25 mm dia. and 600 mm long | 20 | Each | |
| 118 | 118 | Supplying Zinc powered coated star lock\n(Natural White) | 150 | Each | |
| 119 | 119 | Dismantling artificial stone flooring upto 50 mm.\nthick by carefully chiselling without damaging the\nbase and removing rubbish as directed within a\nlead of 75 m. a) In ground floor including roof | 80 | Sqm | |
| 120 | 120 | Dismantling Indian W.C. including taking out base concrete as necessary | 20 | Each | |
| 121 | 121 | Supplying and laying chequered tiles of any shade & of\napproved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] Red Variety 30 mm. thick | 600 | Sqm | |
| 122 | 122 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 Tank connecting nipple (Dia) 20mm | 3 | Each | |
| 123 | 123 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 Tank connecting nipple (Dia) 25mm | 6 | Each | |
| 124 | 124 | Taking out old damaged tarfelt from the roof, parapet etc. preparing the roof surfaces by removing all spoils, blisters, moss etc. from the working site and disposal of the same\nbeyond the compound and cleaning the site in all respect as per direction of Engineer-in-Charge. All floor | 700 | Sqm | |
| 125 | 125 | Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete | 20 | Each | |
| 126 | 126 | Part-\"C\" Based on Market Analysis | |||
| 127 | 127 | Supplying, fitting and fixing Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) PRODUCT CODE: FLR-CHR-5281N PRODUCT RANGE: FLORENTINE of JAQUAR | 20 | Each | |
| 128 | 128 | Supplying, fitting and fixing Tumbler Holder PRODUCT CODE: ACN-CHR-1141N PRODUCT RANGE: CONTINENTAL | 20 | Each | |
| 129 | 129 | Supplying, fitting and fixing Grab Bar (Stainless Steel) 300mm Long PRODUCT CODE: AHS-CHR-1501 PRODUCT RANGE: HOTELIER | 20 | Each | |
| 130 | 130 | Supplying, fitting and fixing Glass to Wall Lock Round type PRODUCT CODE: 7779 PRODUCT RANGE: Godrej | 1 | Each | |
| 131 | 131 | Supplying, fitting and fixing Glass to Glass Lock Round type PRODUCT CODE: 7780 PRODUCT RANGE: Godrej | 1 | Each | |
| 132 | 132 | Supplying, fitting and fixing Top Patch PRODUCT CODE: 7757 PRODUCT RANGE: Godrej | 3 | Each | |
| 133 | 133 | Supplying, fitting and fixing Bottom Patch PRODUCT CODE: 7758 PRODUCT RANGE: Godrej | 3 | Each | |
| 134 | 134 | Supplying, fitting and fixing SS Pull handle - D- Type (25mm dia. X 450 mm) PRODUCT CODE: 7265 PRODUCT RANGE: Godrej | 2 | Each | |
| 135 | 135 | Supplying, fitting and fixing SS Pull handle - H- Type (25mm dia. X 600 mm) PRODUCT CODE: 7270 PRODUCT RANGE: Godrej | 4 | Each | |
| 136 | 136 | Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) | 3 | Cum | |
| 137 | 137 | Half brick masonry with non modular fly ash lime gypsum bricks (FALG Bricks) conforming to class designation 10, confirming to IS : 12894, in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) | 10 | Sqm | |
| 138 | 138 | Part- D Electrical Items | |||
| 139 | 139 | Distribution wiring in 1.1 KV grade 2x22/0.3(1.5sqmm) single core stranded FR PVC insulated & unsheathed copper wire (approved make) in suitable size PVC casing capping (Precision make) with 1x22/0.3(1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC incl. necy. clip, fitting etc. to light/fan/call bell point with piano key type switch (Ancher make) fixed on sheet steel fabricated/wooden switch board with perspex/bacalite top cover 3mm. thick on wall incl.necy. connection and making earthing attachment mending good damages to building works. (PVC casing capping and switch board both on surface) a) Average run 5 mtr. PWD SOR, 17 Pg.-E-11. it. 2 (a). | 225 | each | |
| 140 | 140 | Distribution wiring in 1.1 KV grade 2x22/0.3(1.5sqmm) single core stranded FR PVC insulated & unsheathed copper wire (approved make) in suitable size PVC casing capping (Precision make) with 1x22/0.3(1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC incl. necy. clip, fitting etc. to 5 A. 3Pin flush type plug socket with piano key type switch (Ancher make) fixed on sheet steel fabricated CRC MS/wooden switch board with perspex/bacalite top cover of 3mm thick on wall incl.necy. connection and making earthing attachment mending good damages to building works. (PVC casing capping and switch board both on surface) a) On board. PWD SOR, 17 Pg.-E-12. it. 6 (a) | 180 | each | |
| 141 | 141 | S&F flash type 240 volt 20 amps plug socket with separate 20 amps piano key type switch (Brand approved by EIC) on sheet metal switch board embeded in wall incl. supplying & fixing 150 x 100 x 65 mm MS awitch board (16 SWG) switch board and bakelite/perspex top cover of 3 mm thick by brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connection as required. | 50 | each | |
| 142 | 142 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment STANDARD/Havells/L&T. 4 Way. | 2 | each | |
| 143 | 143 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment STANDARD/Havells/L&T. 6 Way. | 2 | each | |
| 144 | 144 | Supplying & fixing of 240/415 Volt MCB Isolator on din rail of existing DBs and necessories connection L&T/ABB/Seimens make FP 100 Amps. | 4 | each | |
| 145 | 145 | Supplying & fixing of 240/415 Volt MCB of breaking capacity 10 KA & C characteristics on din rail of existing DBs and necessories connection L&T/ABB/Seimens make SP 10 Amps. | 48 | each | |
| 146 | 146 | Supplying & fixing of 240/415 Volt MCB of breaking capacity 10 KA & C characteristics on din rail of existing DBs and necessories connection L&T/ABB/Seimens make SP 32 Amps. | 60 | each | |
| 147 | 147 | Wiring in 1.1 KV. Grade single core stranded 'FR' PVC insulated & unsheated copper wire (Brand Approved by EIC / V-Guard/Flexon/polycab) of following size in 25 mm PVC casing capping (Precision make) incl.nece.PVC clip, fittings etc. | |||
| 148 | 148 | 2x36/0.3 (2.5 sq mm.) + 1x22/0.3 (1.5 sqmm.) | 1200 | RM | |
| 149 | 149 | 2x56/0.3 (4 sqmm.)+ 1x22/0.3 (1.5 sqmm.) | 1150 | RM | |
| 150 | 150 | S&F pendent light fitting complete with holder/angular holder incl. S&F 24/0.24 twin tuisted tinned copper conductor Flexible chord & suspended below ceiling/beam upto 45 cm | 80 | each | |
| 151 | 151 | Supplying & fixing of socket type fan regulator (Step type) (Ancher make) on existing sheet metal switch board with bakelite / perspex top cover by screw after making housing for regulator knob by cutting bakelite / perspex top cover incl. making necessary connection. | 30 | each | |
| 152 | 152 | Supplying of Single phase 300 mm. four blade exhaust fan. ( make Crompton Greaves, usha, havells,).Price list. | 22 | each | |
| 153 | 153 | Fixing exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. Length of twine core copper conductor 1.5 sq.mm. PVC insulated wire and making connection for exhaust fan of dia. 30 cm. (12\"). | 22 | each | |
| 154 | 154 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light point with 2 no. 2 way piano key type switch fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casingcapping and Switch board both on surface] (a). Average run 9 Mtr. | 2 | Each | |
| 155 | 155 | 25 A Power Unit Sapphire (4 module plate, 25 A starter, 25 A socket, 25 A plug). | 20 | Each | |
| 156 | 156 | Supplying of Complete LED Tube light Set 18 / 20 watt. ( ( Make Bajaj, Philips, Havells, Crompton, ). With Co. guaranty / warranty | 65 | Each | |
| 157 | 157 | Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc. \n | 65 | Each | |
| 158 | 158 | Providing new LED street light made of pressure die cast 50 watt. ( Make - Philips, Bajaj, Crompton, Havells, Havlock) With Co. guaranty / warranty | 32 | each | |
| 159 | 159 | Fixing only Floodlight fittings on top of the pole/ masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/ bend pipe 43 mm dia./or by other means as required. | 32 | each | |
| 160 | 160 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below by TAT-medium GI Pipe. | 1 | each | |
| 161 | 161 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. | 1 | each | |
| 162 | 162 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. PWD SOR, 17 Pg.-G-2, . it. 3 (b). | 1 | each | |
| 163 | 163 | Supply of 1.1 KV grade Copper conductor PVC/XLPE insulated 35 sq mm. 4 core Unarmoured cable ISI mark. | 50 | RM | |
| 164 | 164 | Supply of 1.1 KV grade Aluminium conductor PVC/XLPE insulated 95 sq mm. 4 core armoured cable ISI mark. | 35 | RM | |
| 165 | 165 | Supply of 1.1 KV grade Aluminium conductor PVC/XLPE insulated 120 sq mm. 4 core armoured cable ISI mark. | 35 | RM | |
| 166 | 166 | Supply & laying of 1.1 KV grade Stranded Aluminium Conductor PVC insulated 6.00 sq mm. flat 2 core cable. ( Length 90 Mtr.). | 2 | coil | |
| 167 | 167 | Laying of cable above 3/3½ core 35 sqmm upto 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. \n | 50 | RM | |
| 168 | 168 | Laying of one No. cable above 35 sq.mm. and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed. | 20 | RM | |
| 169 | 169 | Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting | 50 | RM | |
| 170 | 170 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 95 Sq.mm. 3.5 core. | 4 | each | |
| 171 | 171 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 120 sq. mm. 3.5 core. | 4 | each | |
| 172 | 172 | Providing new decorative wall mounting, chrome finish fixture with textured glass suitable for 40 watt mini GLS lamp complete set with lamp. Havells Price list. | 20 | each | |
| 173 | 173 | Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc. \n | 20 | Each | |
| 174 | 174 | Supplying & fixing of 230 volt AC Buzzer (Ancho) call bell on HW board incl. S&F HW board. . | 20 | each | |
| 175 | 175 | Providing & fixing of new geyser Havells 10 ltr. Storage Water Geyser ( white Monza EC). Havells Price list. | 22 | each | |
| 176 | 176 | Total impact of GST for the purpose of CTC | BI01010001010000000000000515BI0100001143 | 1 | Nos |
AI Tender Summary
Tender Timeline
Mar 30, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedApr 15, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 17, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender