Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #27526723

Provn Of Vitrified Tiles And Interlocking Tiles In Omqs Orc And Provn Of Certain Major Revenue Works At Begumpet Under Ge Af Hakimpet

Issued by Statutory Bodies & Commissions/Committees · BEGUMPET, Telangana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Apr 2021
0 days left
EMD
82600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
BEGUMPET → Telangana
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Provn Of Vitrified Tiles And Interlocking Tiles In Omqs Orc And Provn Of Certain Major Revenue Works At Begumpet Under Ge Af Hakimpet

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 19-Apr-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 26-Apr-2021

BOQ

NAME OF WORK: PROVN OF VITRIFIED TILES & INTERLOCKING TILES IN OMQs, ORC AND PROVN OF CERTAIN MAJOR REVENUE WORKS AT BEGUMPET UNDER GE (AF) HAKIMPET
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level), complete all as specified and directed.50.7Cum
22Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to out side MD land complete all as specified and directed.137Sqm
33Taking down cement or cement lime plaster on brick or stone walls/ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.69Sqm
44M&L for 25 mm thick PCC (1:2:4) type B1, using 20mm graded stone aggregate as in sub base, floor, path, pavings etc.,surface finished fair & even, complete all as specified and directed.182Sqm
55M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes, complete all as specified and directed.932Sqm
66M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting, complete all as specified and directed.176Sqm
77M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed.83Sqm
88M&L for 15mm thick Acid resistant tiles, vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors & vertical surfaces etc, complete all as specified and directed.78Sqm
99Excavation in trenches not exceeding 1.5 m in wide and not exceeding 1.5m in depth for foundations etc and getting out in soft / loose soil complete all as specified and directed.287.08Cum
1010M&L for Plain cement concrete of Type D2, 1:4:8 (using 40 mm graded crushed granite stone aggregate) in foundations, filling etc, complete all as specified and directed.1.84Cum
1111Formwork to side of foundations, sides and soffits of foundation beams, plinth beams etc for rough finished flat surfaces of concrete, complete all as specified and directed.25.31Sqm
1212M&L for Formwork flat to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed (fair finished)7.73Sqm
1313M&L for Formwork in square, rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed (fair finished)16Sqm
1414M&L for reinforced cement concrete 1:1.5:3 nominal mix (using 20mm graded granite stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete.4.36Cum
1515M&L for RCC 1:1.5:3 grade concrete (using 20mm graded crushed granite stone aggregates) columns, pillars, piers, posts and struts, complete all as specified and directed.1.09Cum
1616M&L for RCC 1:1.5:3 grade controlled concrete (using 20mm graded crushed granite stone aggregates) roof beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.1.38Cum
1717M&L for Mild steel TMT bars 10 mm dia., and over cut to length bent to shape required including cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc, complete all as specified and directed.490Kg
1818M&L for Mild steel TMT bars 8mm dia cut to length bent to shape required including cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc, complete all as specified and directed.22.1Kg
1919Ditto- all as per item No 17 above but 5mm dia and over as in stirrups spacers and binders.274Kg
2020M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete Type C1, 1:3:6 (20mm graded aggregate) Set in cement mortar 1:6 all as specified and directed6.89Cum
2121M&L for applying two coats of cement based paint on surfaces of walls over coat of primer including preparation of surfaces, complete all as specified and directed.82.88Sqm
2222Returning, filling in and including spreading, levelling, watering, well ramming in layers not exceeding 25 cm thick, with excavated soil, complete all as specified and directed.7.35Cum
2323Removing debris and surplus soil to a distance exc 250m not exc 500m and deposited where directed.15.26Cum
2424Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in hard/dense soil, complete all as specified and directed.14Each
2525M&L for PCC 1:2:4, type B2 (using 40mm graded crushed granite stone aggregates) as in in foundations filling and mass concrete and under road cuttings inculding finising surface even and smooth without using extra cement to match with the road surface , complete all as specified and directed.1.94Cum
2626M&L for Mild steel work in tubular trusses, purlins, vertical posts, PLATES INCL NUTS AND BOLTS including special shaped washer etc complete using ERW or induction butt welded tubes conformin gto 1161-1979 grade st 240 complete all as specified and as directed.1297Kg
2727S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as per manufacturers instructions and directions.110Sqm
2828M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.67Sqm
2929Surface dressing not exceeding 15 cm deep in soft/ loose soil all as specified and directed.50Sqm
3030M&L for hard core of guage not exceeding 63 mm deposited spread, levelled in layers not exceeding 15 cm thick watered and rolled/rammed to a true surface with broken boulders or stones of 75mm thick, complete all as specified and directed.128.03Cum
3131M&L for 75 mm thick plain cement concrete type D2, 1:4:8 (using 40mm graded crushed granite stone aggregates) as in sub base, floors, pavings etc, complete all as specified and directed.50Sqm
3232M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) of 75mm thick as in sub-floors, sub-bases, floors and pavings, etc. complete all as specified and as directed.50Sqm
3333Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified and directed.107.5Sqm
3434M&L for PCC type C2, 1:3:6 (using 40mm graded crushed granite stone aggregate) laid as in flooring 75mm thick finished fair and even complete all as specified and directed.107Sqm
3535M&L for PCC type C2, 1:3:6 (using 40mm graded crushed granite stone aggregate) laid as in sub base, 100mm thick finished fair surfaces, complete all as specified and directed.696Sqm
3636M&L for 25mm thick sand cushioning below interlocking paver tile.37.49Cum
3737M&L for machine pressed precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS-15658- 2006 of 60 mm thickness M-40 grade with gray cement, complete all as specified and directed.108Sqm
3838M&L for machine pressed precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS-15658- 2006 of 80 mm thickness M-40 grade with gray cement, complete all as specified and directed.696Sqm
3939Removing excavated/ demolished material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point.280.61Cum
4040M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed.10.95Cum
4141M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring finished even and smooth without using extra cement complete all as specified.750Sqm
4242M&L for Vitrified light coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified and directed.750Sqm
4343All as per item above but at in vertical surfaces like skirting etc., all as specified and directed.75Sqm
4444M&L for preparation of surfaces of distempered and painted surfaces of walls including cornices and applying one coat of oil bound distemper, white or tinted, complete all as specified and directed.200Sqm
4545M&L for preparation of old painted wooden surfaces of any desription over 10 centimetre width or girth and applying one coat of synthetic enamel paint all as specified and as directed.100Sqm
4646Removing building materials etc to a distance exc 1 Km but n.exc 5 Km outside the MOD land including loading, unloading and stacking at the destination.65Load
4747S&F Non Skid colored ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed158Sqm
4848Resecuring or easing & adjusting without taking down shutters of any description, area exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and directed.9Each
4949M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 in internal walls finished even and smooth (without using extra cement), complete all as specified and directed.34Sqm
5050M&L Preparing and applying three coats of white wash on newly plastered surfaces of walls, complete all as specified and directed.30Sqm
5151M&L for preparation of old decorated surfaces of ceiling including cornices and applying one coat of white wash, complete all as specified and directed.22Sqm
5252M&L for Glazed ceramic coloured tiles 450 x 350 x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match.50Sqm
5353Cutting chases, plainning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, sillls, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good cutting not exceeding 10 cm girth brick wall complete all as specified and directed.25RM
5454Taking down or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store, complete all as speicified and directed.25RM
5555Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.25RM
5656Supply and fixing in repairs of 2 way bib cock with wall flange all as specified and as directed. Make : Jaquar FLR-5041N or equivalent approved by GE.2Each
5757Supply and fixing in repairs of hand shower (Health faucet) with 8mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back flow prevented) all as specified and as directed. Make :- Jaquar ALD-577 or equivalent approved by GE.2Each
5858S&F Stop valves, 15 mm bore of pipe, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed2Each
5959S & F PVC connections 15 mm dia, 450 mm long with PTMT nuts, complete all as specified and directed.2Each
6060S&F in repairs of Vitreous China wash down water closet pan (pedestal pattern), white including 10 ltrs PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern and Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed2Each
6161S&F Vitrreous china wash basins, white, flat back, size 550x400mm including brackets, waste fittings, brass, chromium plated 32mm with long screwed shanks and fly nuts, flanged one end and other end fixed, Pillar tap 15mm bore, cast copper alloy, chromium plated fancy type screwed type high pressure, with long screwed shanks and fly-nuts, PVC connections pipe of 15mm bore 45cm long, Angle Stop Valve of PTMT 15mm bore any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms) complete all as specified and directed.2Each
6262S&F in repairs vitreous china urinal, half stall type, white (Excluding flushing cistren, flush pipe and waste pipe), PVC connection pipe 15mm bore, 450 mm long with PTMT nuts, Push tap of 15mm size any colour high pressure of PTMT screwed for iron pipe and fixed (Minimum weight 15mm-47gms/20mm-75gms), Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms).5Each
6363M&L for Granite (of any type) work (table rubbed and polished) of 20mm thick in urinal partition and like over cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade.1.6Sqm
6464S&F in repair 600mm x 450mm x5.5mm thick bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.2Each
6565S & F fancy type CP tubular towel rail brass cromium plated,D type, 61cm long between flanges complete all as specified and directed2Each
6666S&F 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1, complete all as specified and directed.4Each
6767S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls / floor all as specified and as directed.10RM
6868S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls / floor all as specified and as directed.10RM
6969S&F 75mm bore PVC (SWR) bends of any radius with access door.2Each
7070S&F 75mm bore PVC (SWR) junction single (Single 'T') equal or unequal with access door.2Each
7171Removing debris to a distance of exc 1.5 km but n exc 5 km incuding loading and dumping / levelling at the destination.2Load
7272Taking down and removing to or from stores chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame)3Each
7373S&F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and complete all as specified and directed.15RM
7474S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and complete all as specified & directed.5Sqm
7575S&F 100 mm size medium weight cold rolled mild steel butt hinges, complete all as specified and directed.9Each
7676Supply and fix in repairs 150 mm size extruded aluminium door handles fabricated type, complete all as specified and directed.6Each
7777Supply and Fix in repairs 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed, complete all as specified and directed.6Each
7878Demolition of brick work or stone masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.0.5Cum
7979M&L for Brick work with sub class 'B' old size bricks straight or curved on plan exc 6M mean radius built in CM 1:6 as in manhole, septic tank, filter bed.0.5Cum
8080M&L for PCC (1:2:4) type B-1 using (20mm graded stone aggregate) for benching coping etc incl necessary form work.0.2Cum
8181M&L for Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for manhole cover, septic tank covers slabs etc including necessary form work and set in CM (1:4). Note:- Reinforcement will be measured and paid separately.0.1Cum
8282M&L for PCC 1:2:4, type B2 (using 40mm graded crushed granite stone aggregates) as in in foundations filling and mass concrete and under road cuttings inculding finising surface even and smooth without using extra cement to match with the road surface , complete all as specified and directed.2.6Cum

AI Tender Summary

OUR REF NO 27526723
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 26-04-2021
Authority
Authority Name Military Engineer Services
Work Description Provn Of Vitrified Tiles And Interlocking Tiles In Omqs Orc And Provn Of Certain Major Revenue Works At Begumpet Under Ge Af Hakimpet
Basic Detail
Tender No 8248/E8
Bidding Type Tender
Location
City BEGUMPET
State Telangana
Key Dates
Publish Date 19 Apr 2021
Submission Date 26 Apr 2021
Open Date 28 Apr 2021
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 82600
Exemption Not Available
Document List
Tendernotice_1.pdf
BOQ_484047.xls
8248PS.pdf
67CCFA56-4CE4-4CBE-88BA-16C8E4D8DF03.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 19, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Apr 26, 2021
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Apr 26, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Apr 28, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

xls

BOQ_484047.xls

pdf

8248PS.pdf

html

67CCFA56-4CE4-4CBE-88BA-16C8E4D8DF03.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders