| 1 | 1 | Tissue Paper Roll(Double Ply) | ITEM1 | 60 | Nos |
|---|
| 2 | 2 | Spatula Bakelite or Steel | ITEM2 | 10 | Nos |
|---|
| 3 | 3 | Cellulose Nitrate Filter Paper Whatman dia 47mm pore size 0.45 mm(Cat No . 7184-004) | ITEM3 | 10 | Pkt\n(1 Pkt = 100 Nos) |
|---|
| 4 | 4 | (Whatman) Filter Paper,Circular CatNo. | | | |
|---|
| 5 | 4.01 | No.41 (1441125) | ITEM4 | 6 | Pkt\n(1 Pkt = 100 Nos) |
|---|
| 6 | 4.02 | No. 01 | ITEM5 | 15 | Pkt\n(1 Pkt = 100 Nos) |
|---|
| 7 | 4.03 | No. 42 (1442125) | ITEM6 | 6 | Pkt\n(1 Pkt = 100 Nos) |
|---|
| 8 | 4.04 | No. 04 (1004125) | ITEM7 | 6 | Pkt\n(1 Pkt = 100 Nos) |
|---|
| 9 | 5 | Chloroform Bladder (National Make), 500ml | ITEM8 | 75 | Nos |
|---|
| 10 | 6 | Conductivity Cell, Systronics/Toshniwal Make Cell Constant = 0.1 | ITEM9 | 5 | Nos |
|---|
| 11 | 7 | Conductivity Cell, Systronics/Toshniwal Make, Cell Constant = 1.0 | ITEM10 | 5 | Nos |
|---|
| 12 | 8 | Portable Conductivity Meter Min. readability - 0.1µs water proof , automaticTemp.Conpansation , Auto.Power Off 2 point Calibration ,battery Indicator Built in Probe with Protective Cap. | ITEM11 | 2 | Nos |
|---|
| 13 | 9 | Portable Conductivity Meter Min. readability - 1µs water proof ,2 Point Calibration Auto.Power Off ,1 Year Warrenty Built in Probe with Protective Cap. | ITEM12 | 2 | Nos |
|---|
| 14 | 10 | Spares for Muffle furnance (Max. temp . -1200 ° c , working temp. -1150 °c , power requirenment 230 Volts @ 50 Hz ) | | | |
|---|
| 15 | 10.01 | Thermal fuse | ITEM13 | 2 | Nos |
|---|
| 16 | 10.02 | Themocouple Cr/Al for muffle furnance | ITEM14 | 2 | Nos |
|---|
| 17 | 10.03 | Heating Element for muffle furnance(1100 °c Kanthal A-1 resisative wire ) | ITEM15 | 2 | Nos |
|---|
| 18 | 10.04 | Relay for muffle furnance | ITEM16 | 2 | Nos |
|---|
| 19 | 10.05 | Temprature controller (PID controller with SCR power controller) | ITEM17 | 2 | Nos |
|---|
| 20 | 10.06 | Working chamber of muffle furnance 6x6x12 inch | ITEM18 | 1 | Nos |
|---|
| 21 | 10.07 | Working chamber of muffle furnance 5x5x12 inch | ITEM19 | 1 | Nos |
|---|
| 22 | 11 | Nichrome Wire, Heat of combustion 1400 Calori/gm, Fuse wire Nichel- chromium alloy, Dia not less than 0.2 mm | ITEM20 | 500 | Mtr |
|---|
| 23 | 12 | Circular Capsule fuse Silica ,48x15,20ml | ITEM21 | 24 | Nos |
|---|
| 24 | 13 | Sintered Gooch Crucible (G-4) 30 ml | ITEM22 | 4 | Nos |
|---|
| 25 | 14 | Vaccum tubing (3meters) | ITEM23 | 2 | Nos |
|---|
| 26 | 15 | Micro pipette | | | |
|---|
| 27 | 15.01 | 0.1 ml | ITEM24 | 2 | Nos |
|---|
| 28 | 15.02 | 0.5 ml | ITEM25 | 2 | Nos |
|---|
| 29 | 15.03 | 1 ml | ITEM26 | 2 | Nos |
|---|
| 30 | 16 | Water bath Rectangular (double wall), ambient to temp. 95°C, +/-1°C , 220/230V AC , 12 holes 75mm dia (size 425*325*100mm) | ITEM27 | 1 | Nos |
|---|
| 31 | 17 | Petri dish | | | |
|---|
| 32 | 17.01 | (size 100mm Bottom x 17mm height) | ITEM28 | 20 | Nos |
|---|
| 33 | 17.02 | (size 80mm Bottom x 17mm height) | ITEM29 | 20 | Nos |
|---|
| 34 | 18 | Laboratory Hot Plate Rectangular, heating upto 350°C , 220 V AC , (Size 150*100*150mm) 1.2Kw | ITEM30 | 1 | Nos |
|---|
| 35 | 19 | Auto digital conductivity meter , Labtronics /Systronic/Toshniwal/Hach/Labman | | | |
|---|
| 36 | 19.01 | Auto digital Conductivity Meter, Lab tronics/Systronics/Toshniwal/Hach/ Labman Make Cell Constant = 0.1 | ITEM31 | 2 | Nos |
|---|
| 37 | 19.02 | Auto digital Conductivity Meter, Lab tronics/Systronics/Toshniwal/Hach/ Labman Make Cell Constant = 1.0 | ITEM32 | 2 | Nos |
|---|
| 38 | 20 | Vacuum pump for oil sediment filtration unit, capacity- 45 LPM, vacuum- 27\" HG, Pressure- 55 PSIG, Volts- 230 | ITEM33 | 1 | Nos |
|---|
| 39 | 21 | Lab Apron Coat, Free Size | ITEM34 | 9 | Nos |
|---|
| 40 | 22 | Water Safety Jacket | ITEM35 | 2 | Nos |
|---|
| 41 | 23 | Ceramic Crucible with Cover LG GZD 5/PK for large TGA;code no.( 529-047,621-331)20CC,Leco-Make | ITEM36 | 4 | Pkt\n(1 Pkt = 10 Nos) |
|---|
| 42 | 24 | Tablets of Standard Benzoic Acid for bomb Calorimeter , Make-Parr/ leco / merck/Ika,400gm(100gmx4) | ITEM37 | 4 | 100 gm |
|---|
| 43 | 25 | Test Sieve Sets for Coal Mill Fines will be brass/steel, 200mm dia 50mm height, wire cloth from one piece without seam (Set shall be consist of three sieve lid & receiver) 50, 100 and 200 ASTM mesh | ITEM38 | 5 | set |
|---|
| 44 | 26 | Test Sieve for Coal analysis, Brass Frame S.S./Wire mesh CAT No. J-81 | | | |
|---|
| 45 | 26.01 | 2.8mm | ITEM39 | 5 | Nos |
|---|
| 46 | 26.02 | 3.35 mm | ITEM40 | 5 | Nos |
|---|
| 47 | 26.03 | 12.5 mm | ITEM41 | 5 | Nos |
|---|
| 48 | 26.04 | 50 mm | ITEM42 | 5 | Nos |
|---|
| 49 | 26.05 | 212 micron | ITEM43 | 5 | Nos |
|---|
| 50 | 27 | Chlorine gas tonner spanner | ITEM44 | 20 | Nos |
|---|
| 51 | 28 | spares for Automatic KF-7500 titrolene Coulometer | | | |
|---|
| 52 | 28.01 | Generator electrode | ITEM45 | 1 | Nos |
|---|
| 53 | 28.02 | Micro double platinum electrode | ITEM46 | 1 | Nos |
|---|
| 54 | 28.03 | Titration Vessel | ITEM47 | 1 | Nos |
|---|
| 55 | 28.04 | Moisture Trap | ITEM48 | 1 | Nos |
|---|
| 56 | 28.05 | Cable For Generator elrctrode | ITEM49 | 1 | Nos |
|---|
| 57 | 28.06 | Septum of titration vessel | ITEM50 | 8 | Pkt\n(1 Pkt = 100 Nos) |
|---|
| 58 | 29 | Round Magnetic Stirrer bar, small size | ITEM51 | 12 | Nos |
|---|
| 59 | 30 | Bottle relative Density with capillary bore interchangeable tefflon stopper, 25ml | ITEM52 | 10 | Nos |
|---|
| 60 | 31 | Wide Mouth Bottle | | | |
|---|
| 61 | 31.01 | 500ml | ITEM53 | 25 | Nos |
|---|
| 62 | 31.02 | 1000ml | ITEM54 | 35 | Nos |
|---|
| 63 | 32 | Beaker with spout double graduated | | | |
|---|
| 64 | 32.01 | 250 ml | ITEM55 | 10 | Nos |
|---|
| 65 | 32.02 | 500 ml | ITEM56 | 10 | Nos |
|---|
| 66 | 33 | Spare parts for Hammer Mill \"9\" chember | | | |
|---|
| 67 | 33.01 | Rotating Hammer arm with shaft ( Hardened steel/Tungsten carbide lined) | ITEM57 | 2 | Nos |
|---|
| 68 | 33.02 | Ratchet Teeth liner ( Hardened steel/Tungsten carbide lined) | ITEM58 | 2 | Nos |
|---|
| 69 | 33.03 | 212 micron hammer mill Sieve | ITEM59 | 10 | Nos |
|---|
| 70 | 33.04 | 250 micron hammer mill Sieve | ITEM60 | 10 | Nos |
|---|
| 71 | 34 | Spare parts for Hammer Mill \"10\" chember | | | |
|---|
| 72 | 34.01 | Rotating Hammer arm with shaft ( Hardened steel/Tungsten carbide lined) | ITEM61 | 2 | Nos |
|---|
| 73 | 34.02 | Ratchet Teeth liner ( Hardened steel/Tungsten carbide lined) | ITEM62 | 2 | Nos |
|---|
| 74 | 34.03 | 212 micron hammer mill Sieve | ITEM63 | 10 | Nos |
|---|
| 75 | 34.04 | 250 micron hammer mill Sieve | ITEM64 | 10 | Nos |
|---|
| 76 | 35 | Digital pH meter bench top (pH Range- 0 to 14, Accuracy = ±0.01 pH;±1mV, Temperature compensation range manual = -10.0 - 100.0 °C , mV range:- 0 to ±1999mV,Resolution:- 0.01pH;1mV ) | ITEM65 | 2 | Nos |
|---|