Supply Work Of Furniture In Ward Offices , Headquarters And Zone Offices Located In Various Zones Of Municipal Corporation Jaipur Heritage-1 Providing and placing executive tabel size 8 x 36 x 26 (L X W XH) Top- 50 mm membrane finish with step quarter round edges base structure- 18 mm membrane finish, CNC rounting design on modesty panel and pillar, mounting 25+25+25 mm thick with membrane finish with step quarter round edges shutter- 18 mm memmbrane finish with quarter. 2 Providing and placing executive tabel size 69 x 36 x 26 (L X W XH) Top- 50 mm membrane finish with step quarter round edges base structure- 18 mm membrane finish, CNC rounting design on modesty panel and pillar, mounting 25+25+25 mm thick with membrane finish with step quarter round edges shutter- 18 mm memmbrane finish with quarter. 3 Providing and placing executive side rack table size 36 x 16 x 30 (L X W XH) Top- 50 mm membrane finish with step quarter round edges base structure- 18 mm membrane finish, CNC rounting design on modesty panel and pillar, mounting 25+25+25 mm thick with membrane finish with step quarter round edges shutter- 18 mm memmbrane finish with quarter. 4 Supply and Fixing of High back officer Executive Leoma with Head rest. Chair Frame Material-Mild Steel, Seat Material-Leatherette Upholstered, Back Material- Leatherette Upholstered, Base Material-Fibre, Overall Height (cm) 111.76, Overall Width (cm),49.53, Overall Depth (cm) 45.72 ISI marka make brand as per direction of engineer in charge. (Rates are all inclusive taxes.) 5 Supply and Fixing of S.S. Leather Office Visitor Chair black colour with foam seat & back for office use of approved make brand quality as per direction of engineer charge. (Rates are inclusive all taxes) 6 Providing and fixing running L shape sofas upto 750 mm height x 850 mm wide and in meeting room area ,the frame to be made of good quality softwood and 40 density HD foam should be given back and 75 HD density in seat , seat foam of 4 thickness and back faom of 3 thickness, and entire sofa to be covered with approved fabric of not less than 600.00 per meter as per drg. design and specifications. 7 Providing and fixing of Center table size 3-0x3-0x1-6 made out of 19 mm thk commercial plyboard structure as under.The table top 12 mm thick glass. Under structure duly finished in 1 mm thck laminate as per design. 8 CONFERENCE TABLE:-Providing and fixing of U-Shape conference table of 750mm in width and height made out of 19 mm thk commercial board structure ,The table top is made out of 19 mm thk double layered ply booard.all finished with 1 mm thk laminate as per design & drawing .Rate are include necessary electrical conduit & switch boxes complete or as per direction of engineer in charge. 9 P/F corian top: Providing & fixing of dupont (TM) corian (R) Acrylic solid surface or equivlant (Group A/B/C/D/E/F) 6/12mm thick sheets straight fabricated & finished on a single face, pasted with industrial grade silicon on conference Table and storage. 10 Providing & fixing revolving chairs with injection moulded PP back upholstered with breathable mesh.providing 2 dimensional adjustble lumber s upport. seat made of 12 mm thick hot pressed moulded ply bonded from resin which emmits low urea formaldehyde validating green point of view. Ply riveted with star nut for increasing strength in ply & fastening of fasteners . seat provided with pu moulded foam of density 50 kg/m3 of thickness 45 mm to 50 mm.contours designed in foam to give complete seat support & thigh support. T shape height adjustable armrest,comprising of m.s 55 mm(w) x 6mm(t) plate double embossed with 35 mm oval slots drilled for smooth & adjustable fixing of armrests to the seat.the m.s plate covered with p.p cover ,enhancing its aesthetic look & providing the adjustable integrated within.providing a p.u pad on the t shape arms for handrest comfort .m.s insert with p.u intigrated arms 025mm(l)x 80mm(w) x35mm(t) . Providing synchro tilt mechanism. The sheet of the mechanism is 2 mm thick of MS CRCA Grade. The pneumatic height adjustment shall have an adjustment of 10.0 cm and the Pump should be as per Bifma 5.1 standards. Providing 660 mm dia five pronged nylon base, tested up to 1200 kg impact load to evaluate the the stability of the pedestal to withstand stress. Castors provided with the base is 100% nylon made. nSizes: Back Height from ground leve 1000mm, nSeat Height from ground leve 480mm, nSpace between handle to handle 600mm, nSeat (w) 490mm x (D) 490 nBack (w) 490mm x (D) 610mm 11 Providing and fixign Zebra blinds:- Supply of vista or equvelent dimout zebra blinds roller tube made of aodized aluminium alloy extruded upto 40mm outside diameter weight upto 220gms/running mtr. Heavy contrl unit made of high strength reinforced plastic with warp sring clutch heavy high corbon steel sring for tranmit motin from the mechanism. idler of high strength reinforced plastic, consisting of outside sleeve and centre shaft bottom rail made of high strength aluminium alloy extruded tube powder coated with valance rail and ceiling rail covered with cap including ceiling blackout designed shade of fabric provide by the manufacture. 12 Suppply and Fixing of Supreme Ornate Chair with foam black colours of size Max. Overall Height (cm) 81 cm Min. Overall Height (cm) 81 cm with plastic frame or as per direction of engineer in charge (Supreme, Cello or equivalent present brand) (Rates are all inclusive taxes.) 13 Supply and Fixing of Office Enterprise Table size shall be 1350 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller ISI marka make brand as per direction of engineer in charge. (Rates are inclusive all taxes) 14 Supply and Fixing of Office Wooden side rack size (36inchx30inchx16inch) approved make brand including all taxes as per Guidence of engineer in charge.(Rates are inclusive all taxes) 15 Supply and Fixing of 10 mm thick top Table glaas. Size 6x3 Approved make brand and best quality material as per direction of engineer in charge. (Rates are all inclusive taxes.) 16 Supply and Fixing of Big Almirah Storwel plain overall size of 916mm (W )x486mm (D )x1980 mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available ISI marka brand as per direction of engineer in charge. (Rates are inclusive all taxes) 17 Providing and placing computer Table Size 48 L x 30 W x 30 H Material To be made with 18mm pre-laminated board and edges sealed with PVC edge banding . with Sliding key board with channel( 24 x 18 or nearest),Sliding platform for printer (24 x18 or nearest std.), a drawer (12 W x 6 H x 20 D), and a place for CPU with auto hinge cover. 18 Providing and Placing office Table size 6 x 3 x 3 (L X W XH) . The worktop Will be in single piece made up of prelaminated board. The worktop shall be made of 36mm thick prelaminated ply board with 1 mm thick The top is resting on the vertical strips of board of size 750W x 75H. The second table top shall be made up of 25mm thk prelaminated ply board provided with size 500W x 900D. The modesty of the table is also made up of 18 mm thk. prelaminated ply board which is attached with the horizontal panels created under second top under main table top. There shall be an standard space for visitor chair in front of modesty panel. The side panels are also made up of 18mm thick prelaminated board with 2 mm thick hot melt PVC edge banding. 2 drawer pedestal shall be provided Size : 450mmW x 450mmD x 685mmH. and one storage place. 19 Providing and placing Executive Office Table with Multi Storage Space. (Size 5 feet. x 2.5 feet)Tables are manufacture by using Pre laminated board in the Particle Board ensuring a balanced core-to-surface chip size gradationMulti storage space with 2 drawers and 1 file shelf. best locks for all drawers and file cabinet as per direction of engineer charge. 20 Supply and installation TH-32LFE8W, 32 Full HD LED Display, 350 Cd/m2, RS232 x 1, DVI-D x 1, VGA x 1, HDMI x 2, USB Media player, Slim bezel, 20W speakers. PANASONIC make.
