Procurement Of Strength And Conditioning Equipment & Boxing Ring

Sharing tender

Procurement Of Strength And Conditioning Equipment & Boxing Ring - 1 Weight Training Set ( M ) 1.01 Weightlifting Barbel Set ( Men ) 190 Kg ( As Per Iwf Approved For Training Barbell Grade A ) 2 Weight Training Set ( W ) 2.01 Weightlifting Barbel Set ( Women ) 185 Kg ( As Per Iwf Approved For Training Barbell Grade A ) 3 Competition Platform 3.01 Weightlifting Platform For Competition Indigenous Size 400Cm X 400Cm X 10Cm. Base Made Of Wooden Planks With A Total Height 3”. All The Wooden Planks Duly Tight With 4 Nos. Internal Iron Rods. Upper Portion Made Of 1” Rubber On Both Side And Centre Portion Made Of 1” Thick Ply With Grooving. 4 Training Platform 4.01 Level - Square - Measure Four Hundred ( 400 ) Cm On Each Side - Manufactured Or Constructed Of Hardwood, Either Solid Or Laminated; Using A Maximum Of Twenty ( 20 ) Tongue And Groove Hardwood Planks - Hardwood Planks Must Be Attached Together By A Minimum Of Three ( 3 ) Steel Rods - Ten ( 10 ) Cm High; ( If Positioned On A Stage, The Platform Must Exceed Ten ( 10 ) Cm Above The Stage ) - Ten ( 10 ) Cm Demarcation; ( If Surrounding Floor Is Similar Colouring, Top Edge Of The Platform Must Have A Different Colour Demarcating The Edge Of The Platform ) 5 Leg Press 5.01 Proprietary Two-Coat Powder Process Product Weight 298 Kg / 657Lbs Overall Dimansion : Length 2210Mm X 1630Mm X 1350Mm / Machine Weight 266Kg 6 Leg Extention 6.01 Tub Thickness 2.5 Mm / Dimations 140X105x150cm / Weight 214 Kg / Wight Stack 109Kg 7 Calf 7.01 Machine Dimensions: L-59’’, W-30’’, H-40’’. Machine Weight-70 Kgs. Main Frame Size : 100X50 Mm Oval Tub, 3Mm Frame And 75Mm Round Tube 4Mm Thick. Bearing - Sealed Bearing Self Lubricant. Cushions : Durable High Density Cushion Covered In Stitched Vinyl. Frame Protection : Stainless Steel Plate Holders And High Density Pvc Foot Gaurds Protected The Finish Well. Plate Storage: Integrated Stainless Plate Storage Bars. Maximum Load : 200Kg 8 Incline Press ( Chest ) 8.01 Tube Thickness : 2.5Mm / Dimansion: Lxwxh Mm 1310 X 1296 X 2020 Mm / 9 Biceps 9.01 Machine Dimensions: L-54’’, W-38’’, H-48’’. Machine Weight-114 Kgs. Main Frame Size : 100X50 Mm Oval Tub, 3Mm Frame And 75Mm Round Tube 4Mm Thick. Bearing - Sealed Bearing Self Lubricant. Cushions : Durable High Density Cushion Covered In Stitched Vinyl. Frame Protection : Stainless Steel Plate Holders And High Density Pvc Foot Gaurds Protected The Finish Well. Plate Storage: Integrated Stainless Plate Storage Bars. Maximum Load : 150Kg 10 Shoulder Press 10.01 Dimansion : 190 X 135 X 150Cm / Weight Stack : 100 Kg / Weight: 231 Kg 11 Leg Rise Dip 11.01 Dimansion : ( L-49 X W-31 X H-64 ) 12 Adustable Bench 12.01 Dimansion : 52 X 11.25 X 17.5 ( 56.25 At 85 Degree ) / Product Weight 128 Lb 13 Boxing Ring 13.01 Specification ( As Per Aiba Specification ) Dimensions ( Apx ) : Platform Size: 780 Cm X 780 Cm; Platform Height: 1 Mtr. ( 100Cm ) ; Corner Pillar Height : 240 Cm ; Play Area ( Within Ropes ) : 610Cm X 610 Cm; Adjustable Area ( With Turnbuckle Movement ) : 610 Cm X 610 Cm - 550Cm X 550 Cm 1.Metal Structure 1.1 Composition : Should Be Made Of Mild Steel , Preferably Square Pipe , 2.6Mm Thickness Or Above 1.2 Finishing: Powder Coating Is Preferred To Prevent Corrosion Or Rusting. Colour Coordinated Preferred For Easy Assembly .Pillars Colours Should Be 1 Red, 1 Blue, 2 White. 1.3 Fitting: The Outer Structure Must Be Fitted With Nuts, Bolts And Washers, The Inner Spokes To Be Drop Fitted For Quick Assembly And Dissembling. The Outer Metal Panels Must Have Small Probes To Tie Down The Rope Of The Ring Canvass. 1.4 Turnbuckles: 16 Pcs Made Of Mild Steel ( Powder Coated And Galvanised ) , 4 On Each Corner Pillar. Should Be Able To Adjust The Play Area. 1.5 Cross Tension Wire Assembly: The Platform Should Be Tied Diagonally Using This Assembly In Order To Maintain The Stability And Correct Shape Of The Platform. 2. Wood Base: Should Be Preferably Made Of Wood Planks Or Plywood At Least 25 Mm Thick 3. Soft Layer: Should Be Made Of Felt Or A Resilient Foam Which Is Latest 15Mm Up To 25Mm 4. Ring Canvass: Should Be Made Of Non Tear Vinyl Material Royal Blue Colour .Complete With Eyelets And Rope For Tying To The Metal Structure. It Should Be Seam Sealed 650 Gsm +. Dimension: 800 Cm X 800 Cm Apx. 5. Rope: Contents: 4 Ropes Secured With Proper Clamps. Placement: At The Following Height From The Platform: 40 Cm, 70 Cm, 100 Cm, And 130 Cm. Rope Should Be Made Of Polypropylene ( 25Mm Diameter ) Or Galvanized Metal Wire ( Diameter 4Mm + ) . 6. Rope Foam And Cover: In Case Of Metal Wire, The Foam Should Be Covered With A 25Mm Foam Pipe, The Top Cover Should Be Water Proof Coated Vinyl. The Turnbuckles Should Also Have A Protective Cover To Avoid Exposure Of Metal Parts. 7. Rope Spacers / Stripes: Made Of Nylon Tape Apx 50 Mm Wide. Set Of 8 Pcs. 2 Pcs On Each Side In Order O Maintain Proper Gap Between The Ropes. 8. Corner Pads: Set Of 4 Pcs. , 2 Pcs Neutral Corner ( White ) , 1 Red, And 1 Royal Blue. Made Of Coated Vinyl Material, Foam Padded In Triangular Shape. Corner Pads Should Not Touch The Floor; Corner Pads Should Cover The Entire Metal Parts In The Back. 9. Corner Chair And Spit Container: 2 Sets, 1 Red Corner And The Other In Blue Corner, Should Be Able To Move Without Obstruction Of The Rope And Corner Pad. Funnel Should Be Preferably Joined On The Chair Probe For Easy Access. The Pipe Of The Funnel Should Connect To The Disposal Bucket On The Ground. 10. Staircase: 3 Sets Movable, 1 White, 1 Red And 1 Blue. Should Be 3 Steps Only. The Stair Structure Should Be Metal ( Powder Coated ) , The Staircase Can Be Plywood Or Tough Frp Material. 11. Ring Skirt / Apron: Should Be Made Of Coated Vinyl Material ( Waterproof ) . Should Cover The Sides Of The Metal Platform Structure. It Should Have A Provision To Tie To The Corner Pillars; Alternatively There Should Be A Provision To Fix / Tape It With The Ring Canvass. 12. Assembly Instruction: 1 Time Installation To Be Provided By The Supplier, Installation Manual In English For Future Installation Should Be Provided. Actual Installation Video Or Graphic Video Would Be Preferred.