Raising Widening And Strengthening Of Road Mdr-92 To Mdr-94 Via Mdr-51 ( Panjgrain , Dasunda Singh Wala , Bapla , Sandour And Jhuner )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Apr 2021
0 days left
EMD
9.94 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malerkotla → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Raising Widening And Strengthening Of Road Mdr-92 To Mdr-94 Via Mdr-51 ( Panjgrain , Dasunda Singh Wala , Bapla , Sandour And Jhuner )
BOQ
| Name of Work: Raising Widening & Strengthening of Road MDR-92 to MDR-94 via MDR-51 (Panjgrain, Dasunda Singh Wala, Bapla, Sandour and Jhuner) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantaling of brick work /tile masonary or tile lining.\n(i) Dismantaling of dry brick work | 452.79 | Per Cum | |
| 2 | 2 | Dismantling of existing road crust containing stone pitching or soiling. (50 mm to 150 mm thick). | 137.25 | Per Cum | |
| 3 | 3 | Making 50 mm x 50 mm furrows \nMaking 50 mm x 50 mm furrows 45 degree to the centre line of road and at one metre interval in the existing bituminous wearing coarse including sweeping and disposal of excavated material within 1000 meters lead complete as per technical clause 404 of MORT&H specifications. | 43310 | Per Sqm | |
| 4 | 4 | Relaying of recovered material obtained from dismantled road material obtained from road crust compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications | 137.25 | Per Cum | |
| 5 | 5 | Excavation for roadway in soil by mechanical means with dozer including cutting and pushing earth to embankment site with all lead and lifts up to 100m including trimming bottom and side slopes as per technical clause 301 of MORT&H specifications | 5218.5 | Per Cum | |
| 6 | 6 | Construction of embankment with earth obtained from roadway cutting or excavation including spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications | 5218.5 | Per Cum | |
| 7 | 7 | Brick on End Edging\nProviding and laying of brick on end edging 6.83 cm wide, 11.11cm long and 22.86 high half brick deep including excavation, refilling and disposal of surplus earth up to 50 mtr complete as per Punjab PWD specifications. | 29000 | Rmt | |
| 8 | 8 | Water Bound Macadam Grading I (without screening for low volume Roads/undersigned\nProviding, laying, spreading and compacting stone aggregates of Grading I to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications | 5536.6 | Per Cum | |
| 9 | 9 | Water Bound Macadam Grading II (without screening for low volume Roads/undersigned Roads\nProviding, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications | 5986.88 | Per Cum | |
| 10 | 10 | Surface dressing\nProviding and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications. | 79825 | Per Sqm | |
| 11 | 11 | Tack coat with Bitumen VG-10 Bulk\nProviding and applying tack coat with penetration grade bitumen VG- 10 using bitumen pressure distributor @ of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications | 79825 | Per Sqm | |
| 12 | 12 | Open - graded premix\nProviding, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications | 3349.77 | MT | |
| 13 | 13 | Seal coat\nProviding and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications\n | 806.31 | MT | |
| 14 | 14 | Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications | 551.5 | Per Cum | |
| 15 | 15 | Road Structure Work:-\n | |||
| 16 | 16 | Const. of A-Type slab type Culvert | 1 | Each | |
| 17 | 17 | Const. of 1'-6\" (450mm) Dia NP3 Hume Pipe Culvert | 1 | Each | |
| 18 | 18 | Cautionary sign board 600x600x600mm triangular as per IRC 67-2001 with retro reflective\nhigh intensity microprismatic grade sheeting fixed over 2mm thick aluminium sheet with 25x25x3mm angle iron frame supported on a mild steel angle iron post 65x65x6mm without cost of definition plate firmly fixed to ground in foundation concrete 1:2:4 of size 0.45x0.45x0.60m for vertical post complete as per technical clause 801 of MORT&H specifications (24.44 b (i)) | 2 | Each | |
| 19 | 19 | Place Identification sign board 600x600mm square as per IRC 67-2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2mm thick aluminium sheet with 25x25x3mm angle iron frame supported on two mild steel angle iron post 65x65x6mm firmly fixed to ground in foundation concrete 1:2:4 of size 0.45x0.45x0.60m for vertical post complete as per technical clause 801 of MORT&H specifications.24.46 C (i) | 5 | Each | |
| 20 | 20 | Place Identification sign board 900x900mm rectangular as per IRC 67-2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2mm thick aluminium sheet with 25x25x3mm angle iron frame supported on two mild steel angle iron post 65x65x6mm firmly fixed to ground in foundation concrete 1:2:4 of size 0.45x0.45x0.60m for vertical post complete as per technical clause 801 of MORT&H specifications( 24.48 A (i)) | 2 | Each | |
| 21 | 21 | Reinforced cement concrete M-15 grade Km kilometre stone of standard design as per IRC 8-1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications ( 24.37C) | 5 | Each | |
| 22 | 22 | Reinforced cement concrete M-15 grade 200 metre stone of standard design as per IRC 26-1967 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications (2438) | 40 | Each | |
| 23 | 23 | Reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC : 25-1967 fixing in position including painting and printing etc. complete as per technical clause 806 of MORT&H specifications.( 24.39) | 35 | Each | |
| 24 | 24 | Videography of Proposed/Execute site of work of Link Roads before & after completion of work two times (stilling & video Job Work) | 1 | Job | |
| 25 | 25 | (-) D/d Credit of old useful serviceable materials like Brick Bats & Bricks which obtained from Dismantling of existing brick edging:- | |||
| 26 | 26 | (i) Brick Bat | 226.4 | Cum | |
| 27 | 27 | (ii) Bricks | 65202 | Each | |
| 28 | 28 | Add extra cost of Cutlural Cess @ 1% on Total cost as items mentioned above | 4.92215e+07 | Percentage |
AI Tender Summary
Tender Timeline
Mar 25, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedApr 12, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 15, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender