| 1 | 1 | 1. Interior works civil | BI01010001010000000000000515BI0100001113 | | |
|---|
| 2 | 1.01 | 15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001114 | 1 | each |
|---|
| 3 | 1.02 | 15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | BI01010001010000000000000515BI0100001115 | 11.098 | cum |
|---|
| 4 | 1.03 | 14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | BI01010001010000000000000515BI0100001116 | 12 | sqm |
|---|
| 5 | 1.04 | 13.8.1 : 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1:3 ( 1 Cement : 3 fine sand) | BI01010001010000000000000515BI0100001117 | 1.93 | sqm |
|---|
| 6 | 1.05 | 25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face ofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places. | BI01010001010000000000000515BI0100001118 | 79.126 | sqm |
|---|
| 7 | 1.06 | 25.1 : Providing and supplying aluminium extruded tubular and other aluminium sectionsas per the architectural drawings and approved shop drawings , the aluminiumquality as per grade 6063 T5 or T6 as per BS 1474,including super durable powdercoating of 60-80 microns conforming to AAMA 2604 of required colour and shadeas approved by the Engineer-in-Charge. ( The item includes cost of material suchas cleats, sleeves, screws etc. necessary for fabrication of extruded aluminiumframe work. Nothing extra shall be paid on this account). | BI01010001010000000000000515BI0100001119 | 33.217 | kg |
|---|
| 8 | 1.07 | 12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 | BI01010001010000000000000515BI0100001120 | 200.151 | sqm |
|---|
| 9 | 1.08 | 9.105.2 : Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS : 2095 : part I | BI01010001010000000000000515BI0100001121 | 2.61 | sqm |
|---|
| 10 | 1.09 | 14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001122 | 1295.63 | sqm |
|---|
| 11 | 1.1 | 13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001123 | 457.297 | sqm |
|---|
| 12 | 1.11 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001124 | 200.151 | sqm |
|---|
| 13 | 1.12 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001125 | 198.474 | sqm |
|---|
| 14 | 1.13 | 13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm | BI01010001010000000000000515BI0100001126 | 1296.53 | sqm |
|---|
| 15 | 1.14 | 14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | BI01010001010000000000000515BI0100001127 | 45.856 | sqm |
|---|
| 16 | 1.15 | od332622/2020_2021 : SPORTS VINYL FLOORING: Providing and fixing multipurpose sports vinyl flooring with a thickness of 5 mm suitable for gym flooring, and roll width not less than 2000mm.The sub surface for installation must be free from undulation and cleaned well to remove dust and loose particles. The adhesives (arobond/Fevicol or equivalent) must be evenly spread throughout the surface before laying and joints of floor must be welded using suitable welding chord as per manufacture standard etc including cost and conveyance of all materials labour charges etc complete as per direction of Engineer- in- charge . | BI01010001010000000000000515BI0100001128 | 236.408 | sqm |
|---|
| 17 | 1.16 | 10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | BI01010001010000000000000515BI0100001129 | 333.697 | kg |
|---|
| 18 | 1.17 | od332623/2020_2021 : :Providing and fixing 8mm beveled edge mirror of superior glass (of approved quality)<br>complete fixed with bottom railing and suitable round Mirror holder brackets at all level complete as per the<br>direction of Engineer in charge | BI01010001010000000000000515BI0100001130 | 69.721 | sqm |
|---|
| 19 | 1.18 | 9.117.2 : Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 42x50 mm | BI01010001010000000000000515BI0100001131 | 6 | metre |
|---|
| 20 | 1.19 | 9.118.1 : Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter). | BI01010001010000000000000515BI0100001132 | 1.891 | sqm |
|---|
| 21 | 1.2 | 21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately) | BI01010001010000000000000515BI0100001133 | 2.52 | sqm |
|---|
| 22 | 1.21 | 21.4.1 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness | BI01010001010000000000000515BI0100001134 | 1 | each |
|---|
| 23 | 1.22 | 9.83 : Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | BI01010001010000000000000515BI0100001135 | 1 | no |
|---|
| 24 | 1.23 | 14.72 : Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done . | BI01010001010000000000000515BI0100001136 | 607.11 | sqm |
|---|
| 25 | 1.24 | od332624/2020_2021 : Engaging labour for cleaning the existing existing bath room floor including skirting and wall tile from all residues as directed by the engineer in charge. | BI01010001010000000000000515BI0100001137 | 10 | Day |
|---|
| 26 | 2 | ELECTRICAL WORKS | BI01010001010000000000000515BI0100001144 | | |
|---|
| 27 | 2.01 | 1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B | BI01010001010000000000000515BI0100001145 | 79 | point |
|---|
| 28 | 2.02 | 1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C | BI01010001010000000000000515BI0100001146 | 23 | point |
|---|
| 29 | 2.03 | 1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire | BI01010001010000000000000515BI0100001147 | 195 | metre |
|---|
| 30 | 2.04 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | BI01010001010000000000000515BI0100001148 | 285 | metre |
|---|
| 31 | 2.05 | 1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire | BI01010001010000000000000515BI0100001149 | 155 | metre |
|---|
| 32 | 2.06 | 1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm | BI01010001010000000000000515BI0100001150 | 180 | metre |
|---|
| 33 | 2.07 | 1.18.2 : Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair | BI01010001010000000000000515BI0100001151 | 50 | metre |
|---|
| 34 | 2.08 | 1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm | BI01010001010000000000000515BI0100001152 | 180 | metre |
|---|
| 35 | 2.09 | 1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm | BI01010001010000000000000515BI0100001153 | 180 | metre |
|---|
| 36 | 2.1 | 1.53.2 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required2 run of Cable | BI01010001010000000000000515BI0100001154 | 60 | metre |
|---|
| 37 | 2.11 | 1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch | BI01010001010000000000000515BI0100001155 | 23 | each |
|---|
| 38 | 2.12 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch | BI01010001010000000000000515BI0100001156 | 33 | each |
|---|
| 39 | 2.13 | 1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet | BI01010001010000000000000515BI0100001157 | 23 | each |
|---|
| 40 | 2.14 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet | BI01010001010000000000000515BI0100001158 | 33 | each |
|---|
| 41 | 2.15 | 1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet | BI01010001010000000000000515BI0100001159 | 2 | each |
|---|
| 42 | 2.16 | 1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) | BI01010001010000000000000515BI0100001160 | 8 | each |
|---|
| 43 | 2.17 | 1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) | BI01010001010000000000000515BI0100001161 | 23 | each |
|---|
| 44 | 2.18 | 1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm) | BI01010001010000000000000515BI0100001162 | 33 | each |
|---|
| 45 | 2.19 | 1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) | BI01010001010000000000000515BI0100001163 | 20 | each |
|---|
| 46 | 2.2 | od332617/2020_2021 : Supply of 450 mm sweep, 1400 rpm Heavy Duty Exhaust fan working on 230 V A/C with all accessories complete as required | BI01010001010000000000000515BI0100001164 | 3 | each |
|---|
| 47 | 2.21 | 1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep | BI01010001010000000000000515BI0100001165 | 3 | each |
|---|
| 48 | 2.22 | 1.58 : Supplying and fixing PVC batten/ angle holder including connection etc. as required. | BI01010001010000000000000515BI0100001166 | 8 | each |
|---|
| 49 | 2.23 | od332618/2020_2021 : Supply and fixing of 9W LED Bulb in the existing holder as required | BI01010001010000000000000515BI0100001167 | 8 | each |
|---|
| 50 | 2.24 | od332619/2020_2021 : Supply,Installation, testing and commissioning of pre-wired, 3W recess mounting round LED down warm light fittings complete with all accessories directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | BI01010001010000000000000515BI0100001168 | 60 | each |
|---|
| 51 | 2.25 | od332620/2020_2021 : Supply and installation of pre-wired 20W LED batten fitting complete with all accessories and tube etc directly on ceiling/wall, including connection with 1.5sqmm FRLS PVC insulated,copper conductor single core cable and earthing etc as required | BI01010001010000000000000515BI0100001169 | 10 | each |
|---|
| 52 | 2.26 | od332621/2020_2021 : Supply,Installation, testing and commissioning of pre-wired, 9W recess mounting round LED down light fitting complete with all accessories directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | BI01010001010000000000000515BI0100001170 | 102 | each |
|---|
| 53 | 2.27 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole | BI01010001010000000000000515BI0100001171 | 36 | each |
|---|
| 54 | 2.28 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole | BI01010001010000000000000515BI0100001172 | 6 | each |
|---|
| 55 | 2.29 | 2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps | BI01010001010000000000000515BI0100001173 | 2 | each |
|---|
| 56 | 2.3 | 2.13.3 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps | BI01010001010000000000000515BI0100001174 | 1 | each |
|---|
| 57 | 2.31 | 2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps | BI01010001010000000000000515BI0100001175 | 2 | each |
|---|
| 58 | 2.32 | 5.1 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. | BI01010001010000000000000515BI0100001176 | 3 | set |
|---|
| 59 | 2.33 | 90.11.1.11 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required. 6 way(8+18)- three phase double cover(IP42/43) | BI01010001010000000000000515BI0100001177 | 2 | each |
|---|
| 60 | 2.34 | 90.11.1.15 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required. 6 way(8+18)- double cover TPN vertical DB with provision for fixing 4P MCB/osilator/RCCB/RCBO as incomer and SP/TP MCB as outgoing(IP 42/43) | BI01010001010000000000000515BI0100001178 | 1 | each |
|---|
| 61 | 2.35 | 90.12.7.29 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50sq.mm with factory made clamp | BI01010001010000000000000515BI0100001179 | 25 | metre |
|---|
| 62 | 2.36 | 90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq.mm with factory made clamp | BI01010001010000000000000515BI0100001180 | 90 | metre |
|---|
| 63 | 2.37 | 9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm) | BI01010001010000000000000515BI0100001181 | 2 | set |
|---|
| 64 | 2.38 | 9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) | BI01010001010000000000000515BI0100001182 | 4 | set |
|---|
| 65 | 2.39 | 90.16.1.2 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 2.65mm copper conductor (12SWG) | BI01010001010000000000000515BI0100001183 | 180 | metre |
|---|
| 66 | 2.4 | 90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15mm copper conductor (10SWG) | BI01010001010000000000000515BI0100001184 | 110 | metre |
|---|
| 67 | 2.41 | od332625/2020_2021 : Engaging Electrician as per the direction of Engineer in charge as required | BI01010001010000000000000515BI0100001185 | 15 | job |
|---|
| 68 | 2.42 | od332626/2020_2021 : Dismantling of Ceiling fan including the connections and hand over to the Engineer in Charge | BI01010001010000000000000515BI0100001186 | 28 | each |
|---|
| 69 | 2.43 | od332627/2020_2021 : Dismantling of Light fittings including all connections and hand over to the Engineer in Charge | BI01010001010000000000000515BI0100001187 | 24 | each |
|---|
| 70 | 2.44 | od332628/2020_2021 : Design,Supply, installation, testing and commissioning of outdoor duty (IP 54) wall mounted type weatherproof ,double door type KSEB metering panel , suitable for accomodating KSEB energy meter ( supply of energy meter is under KSEB scope) with locable door having glass window, sealing facility for KSEB, top cover and necessary overhang, undergone seven tank process ,powder coated finish and all mounting accessories as required complete .The panel shall be with all accessories as per specification. | BI01010001010000000000000515BI0100001188 | 1 | each |
|---|
| 71 | 3 | HVAC WORKS | BI01010001010000000000000515BI0100001189 | | |
|---|
| 72 | 3.01 | od332598/2020_2021 : Supply, Installation, testing & commissioning of Ductable Air conditioners complete with indoor with cordless remote if required. Make: Daikin, Blue Star, Panasonic or equivalent ;11TR Ductable unit | BI01010001010000000000000515BI0100001190 | 2 | each |
|---|
| 73 | 3.02 | od332599/2020_2021 : Supply installation testing and commissioning of G.S.S ducting with all accessories as per design such as tee, bends, turning vanes,splitter damper inspection door suspension and supporting arrangements for air inlet & outlets, ducts etc ;24 gauge GSS ducting | BI01010001010000000000000515BI0100001191 | 120 | sqm |
|---|
| 74 | 3.03 | od332602/2020_2021 : Supply installation testing and commissioning of G.S.S ducting with all accessories as per design such as tee,bends,turning vanes,splitter damper inspection door suspension and supporting arrangements for air inlet & outlets, ducts etc ;22 gauge GSS ducting | BI01010001010000000000000515BI0100001192 | 102 | sqm |
|---|
| 75 | 3.04 | od332605/2020_2021 : Duct Acoustic Insulation (Nitrile Rubber) ;Supply & installation of class O type Nitrile rubber 10mm closed cell elastomeric insulation for Thermal Insulation of ducts;10 mm thick Nitrile Rubber;Make: Aflex/Kflex/Equivalent | BI01010001010000000000000515BI0100001193 | 120 | sqm |
|---|
| 76 | 3.05 | od332610/2020_2021 : Supply & installation of Hard drawn copper refrigerant piping of various dia with nitrile rubber insulation with all joints sealed with black adhesive tape for 11 TR Ductable Split Air conditioners Make:Mandev,Totaline,Canipro or equivalent;22mm | BI01010001010000000000000515BI0100001194 | 30 | metre |
|---|
| 77 | 3.06 | od332611/2020_2021 : Supply & installation of Hard drawn copper refrigerant piping of various dia with nitrile rubber insulation with all joints sealed with black adhesive tape for 11 TR Ductable Split Air conditioners Make:Mandev,Totaline,Canipro or equivalent;12.7 mm | BI01010001010000000000000515BI0100001195 | 30 | sqm |
|---|
| 78 | 3.07 | od332614/2020_2021 : Supplying & fixing powder-coated extruded aluminum Return Air Grills without aluminum volume control dampers as per specifications. | BI01010001010000000000000515BI0100001196 | 30 | sqm |
|---|
| 79 | 3.08 | od332616/2020_2021 : Supplying &fixing of powder-coated extruded aluminum Supply Air Grills with aluminum volume control dampers as per specifications. | BI01010001010000000000000515BI0100001197 | 30 | sqm |
|---|
| 80 | 3.09 | 90.6.4.64 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 16.00 sqmm 6 Run | BI01010001010000000000000515BI0100001198 | 90 | metre |
|---|
| 81 | 3.1 | 90.12.24.5 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.16 sq.mm | BI01010001010000000000000515BI0100001199 | 24 | each |
|---|
| 82 | 3.11 | 90.6.5.12 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 3 core 2.5 sq.mm | BI01010001010000000000000515BI0100001200 | 100 | metre |
|---|
| 83 | 3.12 | 90.6.5.4 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.2 core 1.5sq mm | BI01010001010000000000000515BI0100001201 | 150 | metre |
|---|
| 84 | 4 | PA SYSTEM & CCTV | BI01010001010000000000000515BI0100001202 | | |
|---|
| 85 | 4.01 | od332596/2020_2021 : Supply and installation of IP camera dome type with 3.6mm lens with the IR range of 20meters with all accessories | BI01010001010000000000000515BI0100001203 | 2 | each |
|---|
| 86 | 4.02 | od332601/2020_2021 : Supply and installation of NVR 4 channel with the POE switch port for the accessing and connectors with all accessories | BI01010001010000000000000515BI0100001204 | 1 | each |
|---|
| 87 | 4.03 | od332604/2020_2021 : Supply and installation of 4U rack with all accessories for the cable managements with all accessories | BI01010001010000000000000515BI0100001205 | 1 | each |
|---|
| 88 | 4.04 | od332607/2020_2021 : Supply , installation, testing, and commissioning of single door access control with the support of Fingerprint, Card, and PIN,Single door RFID based access Control operating voltage DC 12V +/- 10%;Operating current100mA;Dimension 128x64 matrix display operating temperature 10 to 60 deg.;with the storage capacity of 25000 users and emergency push button along with all accessories | BI01010001010000000000000515BI0100001206 | 1 | each |
|---|
| 89 | 4.05 | od332608/2020_2021 : Supply of RFID card for accessing the access control door | BI01010001010000000000000515BI0100001207 | 200 | each |
|---|
| 90 | 4.06 | od332612/2020_2021 : Supply and drawing of 2C x 1.5sq.mm multi stand annealed bare copper conductor PVC insulated speaker wires through the existing conduit as required | BI01010001010000000000000515BI0100001208 | 300 | metre |
|---|
| 91 | 4.07 | od332613/2020_2021 : Supply installation, Testing and commissioning of 120 watts amplifier with LCD display, remote control, for USB, SD/MMC cards. Preamplifier and Line Output for connecting to a Booster Amplifier .Resettable circuit breaker for protection against overload and short circuit | BI01010001010000000000000515BI0100001209 | 1 | each |
|---|
| 92 | 4.08 | od332615/2020_2021 : Supply and installation of 10 watts ceiling speaker with High fidelity and excellent frequency response and line operation with easy power tap selection through a terminal block | BI01010001010000000000000515BI0100001210 | 20 | metre |
|---|
