Directorate of Training and Employment has published Supply Of Raw Material & Tools. Submission Date for this Tender is 29-03-2021. Coats and Jackets Tenders in SARILA Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Supply of Raw Material & Tools | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units(per kg,m,ft,sq ft,lt) | |
| 1 | 1 | Supply item Raw Material | |||
| 2 | 1.01 | Facial Band | item1 | 1 | Nos |
| 3 | 1.02 | Towel (Large & Medium) | item2 | 1 | Nos |
| 4 | 1.03 | Hair Accessories | item3 | 1 | Nos |
| 5 | 1.04 | Pack & Bleach Brush | item4 | 1 | Nos |
| 6 | 1.05 | Hair cutting Scissors/Barber Scissors | item5 | 1 | Nos |
| 7 | 1.06 | Juda Pins | item6 | 1 | Nos |
| 8 | 1.07 | Manicure Set | item7 | 1 | Nos |
| 9 | 1.08 | Cutting Sheet 01 each | item8 | 1 | Nos |
| 10 | 1.09 | Barber Scissors | item9 | 1 | Nos |
| 11 | 1.1 | Thinning Scissors | item10 | 1 | Nos |
| 12 | 1.11 | Velcro Rollers Large, medium, & small | item11 | 1 | Nos |
| 13 | 1.12 | Perm rollers (Star Perm, Ladder Perm, spiral rods, Chop sticks,\nWooden rollers) different sizes Small, medium, large | item12 | 1 | Nos |
| 14 | 1.13 | Dye Brush | item13 | 1 | Nos |
| 15 | 1.14 | Dye Bowl | item14 | 1 | Nos |
| 16 | 1.15 | Professional Hairbrushes set | item15 | 1 | Nos |
| 17 | 1.16 | Scalp steamer | item16 | 1 | Nos |
| 18 | 1.17 | Dummy head on stand with slip on | item17 | 1 | Nos |
| 19 | 1.18 | Dryer | item18 | 1 | Nos |
| 20 | 1.19 | Hair Trolley | item19 | 1 | Nos |
| 21 | 1.2 | Ceramic Straightening Iron | item20 | 1 | Nos |
| 22 | 1.21 | Curling Rods with attachments | item21 | 1 | Nos |
| 23 | 1.22 | Rebonding Boards | item22 | 1 | Nos |
| 24 | 1.23 | Benders | item23 | 1 | Nos |
| 25 | 1.24 | Magnifying lamp | item24 | 1 | Nos |
| 26 | 1.25 | Beauty Studio (Ultrasonic/Galvanic/High Frequency, Brushing unit,\nVacuum & Spray) | item25 | 1 | Nos |
| 27 | 1.26 | High frequency | item26 | 1 | Nos |
| 28 | 1.27 | EMS Machine | item27 | 1 | Nos |
| 29 | 1.28 | Infra red Lamp | item28 | 1 | Nos |
| 30 | 1.29 | Beauty Trolleys | item29 | 1 | Nos |
| 31 | 1.3 | Facial Bed | item30 | 1 | Nos |
| 32 | 1.31 | Pedi spa tub | item31 | 1 | Nos |
| 33 | 1.32 | Manicure table | item32 | 1 | Nos |
| 34 | 1.33 | Pedi stool | item33 | 1 | Nos |
| 35 | 1.34 | Manicure Trolley | item34 | 1 | Nos |
| 36 | 1.35 | Dry Sterilizer (Ultra Violet) | item35 | 1 | Nos |
| 37 | 1.36 | Curtain/Blinds for Lab | item36 | 1 | Nos |
| 38 | 1.37 | Laptop 4th Gen Ci5 or higher Processor, 4GB RAM, 1TB Hard Disk, Win8/latest Preloaded Licensed OS, 2GB Graphics Card, DVD Writer, Standard Ports And Connectors. | item37 | 1 | Nos |
| 39 | 1.38 | Switch 24 Port | item38 | 1 | Nos |
| 40 | 1.39 | Structured cabling in Lab to enable working with Wired Networks for\nPractical | item39 | 1 | Nos |
| 41 | 1.4 | Internet Connectivity Broadband connection with min. 2 mbps\nspeed | item40 | 1 | Nos |
| 42 | 1.41 | Registered Domain at least 100 MB Web Space | item41 | 1 | Nos |
| 43 | 1.42 | Laser Printer Colour A4 Size | item42 | 1 | Nos |
| 44 | 1.43 | Digital Web Cam High Resolution(3.1 mp or higher) | item43 | 1 | Nos |
| 45 | 1.44 | DVD or Blu-Ray Writer 24X or higher external (usb) | item44 | 1 | Nos |
| 46 | 1.45 | Crimping Tool RJ-45 | item45 | 1 | Nos |
| 47 | 1.46 | Mini Dongle for Bluetooth devices Connection USB | item46 | 1 | Nos |
| 48 | 1.47 | Headphone &mic. Set Wired | item47 | 1 | Nos |
| 49 | 1.48 | Sound System 2:1 | item48 | 1 | Nos |
| 50 | 1.49 | External Hard Disk 1 TB | item49 | 1 | Nos |
| 51 | 1.5 | Patch Panel 24 Port | item50 | 1 | Nos |
| 52 | 1.51 | LAN Tester UTP cat5 cable tester (RJ 45) | item51 | 1 | Nos |
| 53 | 1.52 | Punching Tool for punching RJ 45 socket with cat 5 cable | item52 | 1 | Nos |
| 54 | 1.53 | MS Office 2010 (professional) or the latest version available at the time of procurement | item53 | 1 | Nos |
| 55 | 1.54 | Antivirus for – clients / workstations in profile validity of an year or more which should be renewed upon expiry | item54 | 1 | Nos |
| 56 | 1.55 | Open Office or equivalent Latest version | item55 | 1 | Nos |
| 57 | 1.56 | GIMP / IrfanView Image editor or equivalent Latest version | item56 | 1 | Nos |
| 58 | 1.57 | LINUX OS Latest version | item57 | 1 | Nos |
| 59 | 1.58 | Web Authoring tool WYSIWYG Web Authoring tool- Dreamweaver or Open Source tools like Kompozer, FrontPage or similar tools along with FTP tools for ex. Filezilla etc. | item58 | 1 | Nos |
| 60 | 1.59 | Tally ERP 9 or Latest | item59 | 1 | Nos |
| 61 | 1.6 | E Commerce Simulation Software Latest version | item60 | 1 | Nos |
| 62 | 1.61 | Web Server HTTP Web server / XAMPP or any other similar server | item61 | 1 | Nos |
| 63 | 1.62 | Printer table 650X500X750 mm can be varied as per local specifications | item62 | 1 | Nos |
| 64 | 1.63 | Air conditioner | item63 | 1 | Nos |
| 65 | 1.64 | Storage cabinet 60X700X450mm | item64 | 1 | Nos |
| 66 | 1.65 | White Board minimum 4X6 feet | item65 | 1 | Nos |
| 67 | 1.66 | Steel Almirah 2.5 m x 1.20 m x 0.5 m | item66 | 1 | Nos |
| 68 | 1.67 | Fire Extinguisher CO2 2 KG | item67 | 1 | Nos |
| 69 | 1.68 | Drawing boardIS: 1444 700mm x500 mm | item68 | 1 | Nos |
| 70 | 1.69 | Measuring Tape 150 cm | item69 | 1 | Nos |
| 71 | 1.7 | Seam Ripper | item70 | 1 | Nos |
| 72 | 1.71 | Thimble | item71 | 1 | Nos |
| 73 | 1.72 | Tailor's Card Scale Triangular | item72 | 1 | Nos |
| 74 | 1.73 | Tailors Square Plastic | item73 | 1 | Nos |
| 75 | 1.74 | French Curve Set of three | item74 | 1 | Nos |
| 76 | 1.75 | Thread Cutter 24" | item75 | 1 | Nos |
| 77 | 1.76 | Scale plastic | item76 | 1 | Nos |
| 78 | 1.77 | Scissors 25 cm | item77 | 1 | Nos |
| 79 | 1.78 | Leg Shaper Plastic | item78 | 1 | Nos |
| 80 | 1.79 | Garment Hangers | item79 | 1 | Nos |
| 81 | 1.8 | Pressing Table | item80 | 1 | Nos |
| 82 | 1.81 | Blanket for padding of Pressing Table | item81 | 1 | Nos |
| 83 | 1.82 | Rubber mat Size as per requirement | item82 | 1 | Nos |
| 84 | 1.83 | Sprayer | item83 | 1 | Nos |
| 85 | 1.84 | Waste Bin Big / Small | item84 | 1 | Nos |
| 86 | 1.85 | Pattern Punch | item85 | 1 | Nos |
| 87 | 1.86 | Pattern Notcher | item86 | 1 | Nos |
| 88 | 1.87 | Stand for hanging dresses | item87 | 1 | Nos |
| 89 | 1.88 | Electric Automatic steam press | item88 | 1 | Nos |
| 90 | 1.89 | Sewing Machine - | item89 | 1 | Nos |
| 91 | 1.9 | Double Needle Machine | item90 | 1 | Nos |
| 92 | 1.91 | Machine attachments Single Needle Lock stitch Industrial model | item91 | 1 | Nos |
| 93 | 1.92 | Measuring Steel Tape 5 meter | item92 | 1 | Nos |
| 94 | 1.93 | Combination Plier Insulated 200 mm | item93 | 1 | Nos |
| 95 | 1.94 | Screwdriver Insulated 4mm X 150 mm, Diamond Head | item94 | 1 | Nos |
| 96 | 1.95 | Screwdriver Insulated 6mm X 150 mm | item95 | 1 | Nos |
| 97 | 1.96 | Electrician screwdriver thin stem insulated handle 4mm X 100 mm | item96 | 1 | Nos |
| 98 | 1.97 | Heavy Duty Screwdriver insulated 5mm X 200 mm | item97 | 1 | Nos |
| 99 | 1.98 | Electrician Screwdriver thin stem insulated handle 4mm X 250 mm | item98 | 1 | Nos |
| 100 | 1.99 | Punch Centre 9mm X 150 mm | item99 | 1 | Nos |
| 101 | 2 | Knife Double Bladed Electrician 100 mm | item100 | 1 | Nos |
| 102 | 2.01 | Steel Rule Graduated both in Metric and English Unit 300 mm with precision of 1/4th mm | item101 | 1 | Nos |
| 103 | 2.02 | Hammer, cross peen with handle 250 grams | item102 | 1 | Nos |
| 104 | 2.03 | Hammer, ball peen With handle 500 grams | item103 | 1 | Nos |
| 105 | 2.04 | Chisel firmer with wooden Handle 6 mm X 200 mm | item104 | 1 | Nos |
| 106 | 2.05 | Pully Puller with 3 legs 150 mm & 300mm | item105 | 1 | Nos |
| 107 | 2.06 | Bearing Puller (inside and outside) 200 mm | item106 | 1 | Nos |
| 108 | 2.07 | Pipe vice Cast Iron with hardened jaw open type 100 mm | item107 | 1 | Nos |
| 109 | 2.08 | Scissors blade, SS 200mm | item108 | 1 | Nos |
| 110 | 2.09 | Crimping Tool 1.5 sq mm to 16 sq mm | item109 | 1 | Nos |
| 111 | 2.1 | Wire Cutter and Stripper 150 mm | item110 | 1 | Nos |
| 112 | 2.11 | Hacksaw frame Adjustable 300 mm Fixed 150 mm | item111 | 1 | Nos |
| 113 | 2.12 | Try Square 150 mm blade | item112 | 1 | Nos |
| 114 | 2.13 | Outside Calliper 150 mm spring type | item113 | 1 | Nos |
| 115 | 2.14 | Inside Calliper 150 mm spring type | item114 | 1 | Nos |
| 116 | 2.15 | Pliers long nose insulated 150 mm | item115 | 1 | Nos |
| 117 | 2.16 | Pliers flat nose insulated 200 mm | item116 | 1 | Nos |
| 118 | 2.17 | Tweezers 150 mm | item117 | 1 | Nos |
| 119 | 2.18 | Snip Straight and Bent heavy duty 250 mm | item118 | 1 | Nos |
| 120 | 2.19 | Gauge, wire imperial stainlees steel marked in SWG & mm Wire Gauge - Metric | item119 | 1 | Nos |
| 121 | 2.2 | Oil Can 250 ml | item120 | 1 | Nos |
| 122 | 2.21 | Contactor & auxiliary contacts 3 phase, 415 Volt, 25 Amp with 2 NO and 2 NC | item121 | 1 | Nos |
| 123 | 2.22 | Contactor & auxiliary contacts. 3 phase, 415 volt, 32 Amp with 2 NO and 2 NC | item122 | 1 | Nos |
| 124 | 2.23 | Limit Switch Limit Switch, Liver operated 2A 500v, 2-contacts | item123 | 1 | Nos |
| 125 | 2.24 | Rotary Switch 16 A/440v | item124 | 1 | Nos |
| 126 | 2.25 | Relay-\na. Cut out Relays 16A, 440V\nb. Reverse current 16A, 440V\nc. Over current 16A, 440V\nd. Under voltage 360V-440V | item125 | 1 | Nos |
| 127 | 2.26 | Pin Type, shackle type, egg type & suspension type insulators including hardware fitting | item126 | 1 | Nos |
| 128 | 2.27 | Hydrometer | item127 | 1 | Nos |
| 129 | 2.28 | Hand Drill Machine 0-6 mm capacity | item128 | 1 | Nos |
| 130 | 2.29 | Portable Electric Drill Machine 0-12 mm capacity 750w, 240v with chuck and key | item129 | 1 | Nos |
| 131 | 2.3 | Brake Test arrangement with two spring balance rating 0 to 25 kg | item130 | 1 | Nos |
| 132 | 2.31 | Laboratory Type Induction Coil 1000 W | item131 | 1 | Nos |
| 133 | 2.32 | Thermometer Digital 0° C - 150° C | item132 | 1 | Nos |
| 134 | 2.33 | Series Test Lamp 230V, 60W | item133 | 1 | Nos |
| 135 | 2.34 | Miniature Breaker 16 amp | item134 | 1 | Nos |
| 136 | 2.35 | Earth Plate 60cm X 60cm X 3.15mm Copper Plate 60cm X 60cm X 6mm GI Plate | item135 | 1 | Nos |
| 137 | 2.36 | Earth Electrode Primary Electrode 2100x28x3.25mm Secondary Cu Strip 20x5mm | item136 | 1 | Nos |
| 138 | 2.37 | MCCB 100Amps, Triple pole | item137 | 1 | Nos |
| 139 | 2.38 | ELCB and RCCB 25Amps, double pole and 25Amps, double pole, I?n 30 mA | item138 | 1 | Nos |
| 140 | 2.39 | Fuses HRC Glass Rewire Type | item139 | 1 | Nos |
| 141 | 2.4 | Rheostat (Sliding type) 0 - 25 Ohm, 2 Amp\n0 - 300 Ohm, 2 Amp\n0 -1 Ohm, 10Amp\n0 -10 Ohm, 5 Amp | item140 | 1 | Nos |
| 142 | 2.41 | Capacitors Electrolytic Ceramic Polyester film Variable Dual run | item141 | 1 | Nos |
| 143 | 2.42 | Various Electronic components Resistors, Diode, Transistor, UJT, FET, SCR, DIAC, TRAIC, IGBT, Small\ntransformer etc. | item142 | 1 | Nos |
| 144 | 2.43 | Various Lamps Halogen Incandescent Lamp Fluorescent tube HP mercury vapor Lamp High-pressure sodium Lamp Low-pressure sodium Lamp LED | item143 | 1 | Nos |
| 145 | 2.44 | Plug socket Piano Switch Lamp Holder 230 V, 5 A | item144 | 1 | Nos |
| 146 | 2.45 | Cables: Twisted Pair Non-Metallic Sheathed Cable Underground Feeder Cable Ribbon Cable Metallic Sheathed Cable Multi-Conductor Cable Coaxial Cable Direct-Buried Cable 1 mtr each | item145 | 1 | Nos |
| 147 | 2.46 | Bus bar with brackets 1 mtr each | item146 | 1 | Nos |
| 148 | 2.47 | Rubber mat 2’ x 4’ x 1” | item147 | 1 | Nos |
| 149 | 2.48 | Electrician Helmet Yellow Colour | item148 | 1 | Nos |
| 150 | 2.49 | RCC Pole with accessories (MS angle iron, ‘C’ clamp, stay insulator etc.) and materials 6 Mtr | item149 | 1 | Nos |
| 151 | 2.5 | Safety Belt Standard quality | item150 | 1 | Nos |
| 152 | 2.51 | Ohm Meter; Series Type & Shunt Type, portable box type 50/2000-ohm analog | item151 | 1 | Nos |
| 153 | 2.52 | Digital Multi Meter DC 200mv -1000v,0 – 10A & AC 200mv- 750v , 0-10A, resistance 0-20 MO and 3 1/2 digit | item152 | 1 | Nos |
| 154 | 2.53 | A.C. Voltmeter M.I. analog, portable box type housed in Bakelite case Multi range 75 V - 150V - 300V - 600V | item153 | 1 | Nos |
| 155 | 2.54 | Milli Voltmeter centre zero analog, portable box type housed in Bakelite case 100 – 0 – 100 mV | item154 | 1 | Nos |
| 156 | 2.55 | Ammeter MC analog, portable box type housed in Bakelite case 0 - 500 mA, 0-5 A, 0-25 A | item155 | 1 | Nos |
| 157 | 2.56 | AC Ammeter MI, analog, portable box type housed in Bakelite case 0 - 1 A, 0-5 A, 0-25 A | item156 | 1 | Nos |
| 158 | 2.57 | Kilo Wattmeter Analog 0-1.5-3KW, pressure coil rating- 240v/440v, current rating-5A/10A Analoge, portable type Housed in Bakelite case | item157 | 1 | Nos |
| 159 | 2.58 | Digital Wattmeter 230 V, 1 KW, 50 Hz | item158 | 1 | Nos |
| 160 | 2.59 | A.C. Energy Meter Single Phase, 10 A, 240 V induction type | item159 | 1 | Nos |
| 161 | 2.6 | A.C. Energy Meter Three Phase, 15 A , 440 V induction type | item160 | 1 | Nos |
| 162 | 2.61 | Power Factor Meter Digital 440 V, 20 A, Three Phase portable box type | item161 | 1 | Nos |
| 163 | 2.62 | Frequency Meter 45 to 55 Hz | item162 | 1 | Nos |
| 164 | 2.63 | Lux meter lux meter LCD read out 0.05 to 7000 lumens with battery. | item163 | 1 | Nos |
| 165 | 2.64 | Tachometer Analog Type - 10000 RPM | item164 | 1 | Nos |
| 166 | 2.65 | Tachometer Digital Photo Sensor Type - 10000 RPM | item165 | 1 | Nos |
| 167 | 2.66 | Tong Tester / Clamp Meter 0 - 100 A (Digital Type) | item166 | 1 | Nos |
| 168 | 2.67 | Megger Analog - 500 V | item167 | 1 | Nos |
| 169 | 2.68 | Wheat Stone Bridge with galvanometer and battery | item168 | 1 | Nos |
| 170 | 2.69 | Phase Sequence Indicator 3 Phase, 415 V | item169 | 1 | Nos |
| 171 | 2.7 | AC Starters: -\na. Resistance type starter\nb. Direct online Starter\nc. Star Delta Starter- Manual\nd. Star Delta Starter – Semi automatic\ne. Star Delta Starter – Fully automatic\nf. Star Delta Starter - Soft starter\ng. Auto Transformer type For A.C Motors of 2 to 5 H.P. | item170 | 1 | Nos |
| 172 | 2.71 | Oscilloscope Dual Trace 20 MHz | item171 | 1 | Nos |
| 173 | 2.72 | Temperature controlled Soldering Iron 50-Watt, 230 Volt | item172 | 1 | Nos |
| 174 | 2.73 | Domestic Appliances – A. Mixture & Grinder 750 W, 240 V B. Washing Machine Semi-Automatic 5 Kg C. Motor Pump set 1 HP, 1 Phase, 240 V | item173 | 1 | Nos |
| 175 | 2.74 | Inverter with Battery 1 KVA with 12 V Battery Input- 12 volt DC, Output- 220 volt AC | item174 | 1 | Nos |
| 176 | 2.75 | DC Power Supply 0 - 30 V, 5 A | item175 | 1 | Nos |
| 177 | 2.76 | Current Transformer 415 V, 50Hz, CT Ratio 25 / 5 A, 5VA | item176 | 1 | Nos |
| 178 | 2.77 | Potential Transformer 415 V, 50Hz, PT Ratio, 440V/110V,10VA | item177 | 1 | Nos |
| 179 | 2.78 | Solar panel with Battery 18 Watt | item178 | 1 | Nos |
| 180 | 2.79 | Ink jet/ laser printer | item179 | 1 | Nos |
| 181 | 2.8 | DC Series Motor coupled with spring balance load 2.5 KW, 220 Volts | item180 | 1 | Nos |
| 182 | 2.81 | AC Squirrel Cage Motor with star delta starter and triple pole iron clad switch fuse with Mechanical Load. 5 HP, 3-Phase, 415 V, 50 Hz | item181 | 1 | Nos |
| 183 | 2.82 | Synchronous motor with accessories like starter, excitation arrangements. 3 Phase, 3 HP, 440V, 50Hz, 4 Pole | item182 | 1 | Nos |
| 184 | 2.83 | Thyristor /IGBT controlled D.C. motor drive with tacho-generator feedback arrangement 1 HP | item183 | 1 | Nos |
| 185 | 2.84 | Single phase Transformer, core type, air cooled 1 KVA , 240/415 V, 50 Hz | item184 | 1 | Nos |
| 186 | 2.85 | Used DC Generators-series, shunt and compound type for overhauling practice | item185 | 1 | Nos |
| 187 | 2.86 | Pillar Electric Drill Machine Motorized 12-20 mm Capacity, 1HP, 440V, 3 phase, Induction Motor with DOL starter, Bench Type | item186 | 1 | Nos |
| 188 | 2.87 | Motorised Bench Grinder | item187 | 1 | Nos |
| 189 | 2.88 | A.C. Series type Motor 1 HP, 240 V, 50 Hz | item188 | 1 | Nos |
| 190 | 2.89 | Manual Motor coil Winding Machine With step arbor | item189 | 1 | Nos |
| 191 | 2.9 | Ceiling fan coil Winding Machine 250V, 50 Hz, 1-?, with speed control | item190 | 1 | Nos |
| 192 | 2.91 | Primary current injection set 220V, 50 Hz, 1-?, output current - 200 A (min) with timer | item191 | 1 | Nos |
| 193 | 2.92 | Revolving Chair with adjustable hight & back support | item192 | 1 | Nos |
| 194 | 2.93 | Faculty Table & Chair set | item193 | 1 | Nos |
| 195 | 2.94 | Adjustable Set square | item194 | 1 | Nos |
| 196 | 2.95 | Scissors 25 cm | item195 | 1 | Nos |
| 197 | 2.96 | Garment Hangers | item196 | 1 | Nos |
| 198 | 2.97 | Cart chop | item197 | 1 | Nos |
| 199 | 2.98 | Trial room with 3 side mirrors of size 150 cm X 60 cm each with arrangements of hanging Dresses | item198 | 1 | Nos |
| 200 | 2.99 | Sewing Machine - Single Needle\nLock stitch Industrial model | item199 | 1 | Nos |
| 201 | 3 | Pick Glass | item200 | 1 | Nos |
| 202 | 3.01 | Machine attachments | item201 | 1 | Nos |
| 203 | 3.02 | Instructor Table | item202 | 1 | Nos |
| 204 | 3.03 | Steel Almirah 195 x 90 x 60 cm | item203 | 1 | Nos |
| 205 | 3.04 | Locks for above pigeon hole | item204 | 1 | Nos |
| 206 | 3.05 | White Board with accessories size as per requirement | item205 | 1 | Nos |
| 207 | 3.06 | Mannequins lady | item206 | 1 | Nos |
| 208 | 3.07 | Mannequins Kids | item207 | 1 | Nos |
| 209 | 3.08 | Mannequins Gents | item208 | 1 | Nos |
| 210 | 3.09 | UPS | item209 | 1 | Nos |
| 211 | 3.1 | Server system with software Latest Configuration | item210 | 1 | Nos |
| 212 | 3.11 | LAN Connectivity & Internet\nfacility to the computers | item211 | 1 | Nos |
| 213 | 3.12 | Designing Software Coral Draw Latest Version | item212 | 1 | Nos |
| 214 | 3.13 | Laser Printer color A4 | item213 | 1 | Nos |
| 215 | 3.14 | Colored laser Printer A3 | item214 | 1 | Nos |
| 216 | 3.15 | Table for Scanner | item215 | 1 | Nos |
| 217 | 3.16 | Air Conditioner unit split type\nwith Stabilizer | item216 | 1 | Nos |
| 218 | 3.17 | Modular Workstation with\nchair | item217 | 1 | Nos |
| 219 | 3.18 | LCD Projector | item218 | 1 | Nos |
| 220 | 3.19 | Trainer's Table & Chair | item219 | 1 | Nos |
| 221 | 3.2 | White Board Marker Assorted colour | item220 | 1 | Nos |
| 222 | 3.21 | Duster Cloth 2’/2’ | item221 | 1 | Nos |
| 223 | 3.22 | Cleaning Liquid 500 ml | item222 | 1 | Nos |
| 224 | 3.23 | Photo Copy Paper A4 | item223 | 1 | Nos |
| 225 | 3.24 | Full Scape Paper White | item224 | 1 | Nos |
| 226 | 3.25 | Cartridges for printer Colour/monochrome as per model of the printer | item225 | 1 | Nos |
| 227 | 3.26 | I/O Box with socket RJ 45 | item226 | 1 | Nos |
| 228 | 3.27 | RJ 45 connector For connecting utp cat 5 cable | item227 | 1 | Nos |
| 229 | 3.28 | Optical Mouse USB/PS2 | item228 | 1 | Nos |
| 230 | 3.29 | Key Board USB/PS2 | item229 | 1 | Nos |
| 231 | 3.3 | SMPS 12V DC | item230 | 1 | Nos |
| 232 | 3.31 | CMOS Batteries 3.0 V | item231 | 1 | Nos |
| 233 | 3.32 | Power Chord 3 Pin | item232 | 1 | Nos |
| 234 | 3.33 | Cable Cat 5/5e | item233 | 1 | Nos |
| 235 | 3.34 | Stapler Small | item234 | 1 | Nos |
| 236 | 3.35 | Stapler Big | item235 | 1 | Nos |
| 237 | 3.36 | Battery for remote AAA | item236 | 1 | Nos |
| 238 | 3.37 | Battery for clock AA | item237 | 1 | Nos |
| 239 | 3.38 | Pen drive 8 GB | item238 | 1 | Nos |
| 240 | 3.39 | CDs 52x or higher | item239 | 1 | Nos |
| 241 | 3.4 | DVDs 4.7GB or higher | item240 | 1 | Nos |
| 242 | 3.41 | Battery for LAN tester 9 V | item241 | 1 | Nos |
| 243 | 3.42 | Power Adapter For Hub, Switch, Router | item242 | 1 | Nos |
| 244 | 3.43 | Heat Convector | item243 | 1 | Nos |
| 245 | 3.44 | Air conditioner split | item244 | 1 | Nos |
| 246 | 3.45 | Almirah | item245 | 1 | Nos |
| 247 | 3.46 | Wet Sterilizer | item246 | 1 | Nos |
| 248 | 3.47 | Student's chair with flap | item247 | 1 | Nos |
| 249 | 3.48 | Teacher's Table and chair set | item248 | 1 | Nos |
| 250 | 3.49 | LCD Projector | item249 | 1 | Nos |
| 251 | 3.5 | Computer set with UPS | item250 | 1 | Nos |
| 252 | 3.51 | White Magnetic Board with felt\nboard | item251 | 1 | Nos |
| 253 | 3.52 | Teacher's Chair | item252 | 1 | Nos |
| 254 | 3.53 | Curtain for Lab. | item253 | 1 | Nos |
| 255 | 3.54 | Steel Almirah | item254 | 1 | Nos |
| 256 | 3.55 | Desktop Computer, for running CAD software, preloaded with windows. CPU: 32/64 Bit i3/i5/i7 or latest processor, Speed: 3 GHz or Higher. RAM:-4 GB DDR-III or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, with USB Mouse, USB Keyboard and Monitor (Min. 17 Inch. Licensed Operating System and Antivirus compatible with trade related software. | item255 | 1 | Nos |
| 257 | 3.56 | Sever (True dedicated sever) | item256 | 1 | Nos |
| 258 | 3.57 | Software: MS- office latest version, CAD with latest Licensed version,[Optional: Latest Version of\nSOLIDWOKS, AUTODESK INVENTOR, CATIA & PRO-E | item257 | 1 | Nos |
| 259 | 3.58 | (CREO-2)] | item258 | 1 | Nos |
| 260 | 3.59 | Plotter (Max. A0 size) | item259 | 1 | Nos |
| 261 | 3.6 | Table for server, printers | item260 | 1 | Nos |
| 262 | 3.61 | Printer Colour laser | item261 | 1 | Nos |
| 263 | 3.62 | Single desks for trainees with\narrangements of keeping Books etc. | item262 | 1 | Nos |
| 264 | 3.63 | Computer set with UPS & multimedia\nprojector | item263 | 1 | Nos |
| 265 | 3.64 | White Magnetic Board with Felt board\n& accessories | item264 | 1 | Nos |
| 266 | 3.65 | Book Shelf | item265 | 1 | Nos |
| 267 | 3.66 | A/C unit split type | item266 | 1 | Nos |
| 268 | 3.67 | Wiring Board 3-meter x1 meter with 0.5 meter projection on the top | item267 | 1 | Nos |
| 269 | 3.68 | Almirah 2.5 m x 1.20 m x 0.5 m | item268 | 1 | Nos |
| 270 | 3.69 | Black board/white board (minimum 4X6 feet) | item269 | 1 | Nos |
| 271 | 3.7 | Single desks for trainees With arrangements of keeping Books etc. | item270 | 1 | Nos |
| 272 | 3.71 | Revolving Chairs without arms | item271 | 1 | Nos |
| 273 | 3.72 | Faculty Table & Chair set | item272 | 1 | Nos |
| 274 | 3.73 | Computer set with UPS & multimedia projector | item273 | 1 | Nos |
| 275 | 3.74 | Storage Almirah | item274 | 1 | Nos |
| 276 | 3.75 | A/C unit Stabilizer | item275 | 1 | Nos |
| 277 | 3.76 | Connecting screwdriver 100 mm | item276 | 1 | Nos |
| 278 | 3.77 | Screw driver set set of 5 | item277 | 1 | Nos |
| 279 | 3.78 | Insulated side cutting pliers 150 mm | item278 | 1 | Nos |
| 280 | 3.79 | Soldering iron 25 W. 240 V | item279 | 1 | Nos |
| 281 | 3.8 | Tweezers 100mm | item280 | 1 | Nos |
| 282 | 3.81 | Soldering Iron Changeable bits 15 W | item281 | 1 | Nos |
| 283 | 3.82 | De- soldering pump | item282 | 1 | Nos |
| 284 | 3.83 | Crimping tool (pliers) | item283 | 1 | Nos |
| 285 | 3.84 | Soldering Iron 25W | item284 | 1 | Nos |
| 286 | 3.85 | Magneto spanner set | item285 | 1 | Nos |
| 287 | 3.86 | Screw driver 150mm | item286 | 1 | Nos |
| 288 | 3.87 | Soldering Iron 240W | item287 | 1 | Nos |
| 289 | 3.88 | Allen key set set of 9 | item288 | 1 | Nos |
| 290 | 3.89 | Tubular box spanner set of 6 | item289 | 1 | Nos |
| 291 | 3.9 | Continuity tester | item290 | 1 | Nos |
| 292 | 3.91 | Soldering iron 10W | item291 | 1 | Nos |
| 293 | 3.92 | Scissors 200 mm | item292 | 1 | Nos |
| 294 | 3.93 | Server Computer CPU: 32/64 Bit i3/i5/i7 or latest\nprocessor, Speed: 3 GHz or Higher.Cache Memory: - Minimum 3 MB or better. RAM:-8 GB DDR-III or Higher. Hard Disk Drive: 500GB or Higher, 7200 rpm (minimum) or Higher, Wi- Fi Enabled. Network Card: Integrated Gigabit Ethernet (10/100/1000) - Wi-Fi, USB\nMouse, USB Keyboard and Monitor (Min. 17 Inch), Standard Ports and connectors. DVD Writer, Speakers And Mic. Licensed Windows Operating System / OEM Pack (Preloaded), Antivirus / Total\nSecurity | item293 | 1 | Nos |
| 295 | 3.94 | Intel Mobile Desktop based PC with LCD monitor CPU: 32/64 Bit i3/i5/i7 or latest processor, Speed: 3 GHz or Higher. RAM:-4 GB DDR-III or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, with USB Mouse, USB Keyboard and Monitor (Min. 17 Inch. Licensed Operating System and Antivirus compatible with trade related software. | item294 | 1 | Nos |
| 296 | 3.95 | Tablet | item295 | 1 | Nos |
| 297 | 3.96 | Network Printer | item296 | 1 | Nos |
| 298 | 3.97 | Online UPS 650 v | item297 | 1 | Nos |
| 299 | 3.98 | Power Meter | item298 | 1 | Nos |
| 300 | 3.99 | Computer Toolkits | item299 | 1 | Nos |
| 301 | 4 | Motherboards (of different make) | item300 | 1 | Nos |
| 302 | 4.01 | Cabinets | item301 | 1 | Nos |
| 303 | 4.02 | Processors (of different make) | item302 | 1 | Nos |
| 304 | 4.03 | Hard Disk different types 1 TB or higher | item303 | 1 | Nos |
| 305 | 4.04 | LCD/LED/TFT Monitors | item304 | 1 | Nos |
| 306 | 4.05 | Pen Drives | item305 | 1 | Nos |
| 307 | 4.06 | External DVD Writer | item306 | 1 | Nos |
| 308 | 4.07 | Mouse | item307 | 1 | Nos |
| 309 | 4.08 | Anti static pads | item308 | 1 | Nos |
| 310 | 4.09 | SMPS | item309 | 1 | Nos |
| 311 | 4.1 | Blu-Ray drive and player | item310 | 1 | Nos |
| 312 | 4.11 | Digital Camera | item311 | 1 | Nos |
| 313 | 4.12 | Network storage | item312 | 1 | Nos |
| 314 | 4.13 | Card Reader | item313 | 1 | Nos |
| 315 | 4.14 | Game video card | item314 | 1 | Nos |
| 316 | 4.15 | Different types of memory cards | item315 | 1 | Nos |
| 317 | 4.16 | Laptop kits | item316 | 1 | Nos |
| 318 | 4.17 | Laptop spares: Cabinet with display, memory, hard disk, battery pack, keyboard membrane, chargers | item317 | 1 | Nos |
| 319 | 4.18 | Power electronics Trainer kit | item318 | 1 | Nos |
| 320 | 4.19 | Post error debugging card | item319 | 1 | Nos |
| 321 | 4.2 | PCI slot Testing tool | item320 | 1 | Nos |
| 322 | 4.21 | Windows Server Operating System | item321 | 1 | Nos |
| 323 | 4.22 | Windows Operating System | item322 | 1 | Nos |
| 324 | 4.23 | Linux Operating System | item323 | 1 | Nos |
| 325 | 4.24 | Network Management Software | item324 | 1 | Nos |
| 326 | 4.25 | Open source Pc Utility / Tweak Software | item325 | 1 | Nos |
| 327 | 4.26 | Computer Tables | item326 | 1 | Nos |
| 328 | 4.27 | Computer Chairs | item327 | 1 | Nos |
| 329 | 4.28 | Air Conditioners | item328 | 1 | Nos |
| 330 | 4.29 | Modem | item329 | 1 | Nos |
| 331 | 4.3 | Telephone Line | item330 | 1 | Nos |
| 332 | 4.31 | Broadband Internet Connection | item331 | 1 | Nos |
| 333 | 4.32 | Fire Fighting Equipments | item332 | 1 | Nos |
| 334 | 4.33 | LAN Protocol Simulation and Analyser Software | item333 | 1 | Nos |
| 335 | 4.34 | Network and Internet security trainer | item334 | 1 | Nos |
| 336 | 4.35 | LAN cable tester | item335 | 1 | Nos |
| 337 | 4.36 | Network cables – UTP | item336 | 1 | Nos |
| 338 | 4.37 | Network Cables – coaxial, flat, ribbon | item337 | 1 | Nos |
| 339 | 4.38 | LAN Cards, wi-fi LAN Card | item338 | 1 | Nos |
| 340 | 4.39 | Connectors for cables | item339 | 1 | Nos |
| 341 | 4.4 | Power Meter | item340 | 1 | Nos |
| 342 | 4.41 | Media Convertor | item341 | 1 | Nos |
| 343 | 4.42 | SC Couplers | item342 | 1 | Nos |
| 344 | 4.43 | SC Pigtails | item343 | 1 | Nos |
| 345 | 4.44 | RJ-45 connector | item344 | 1 | Nos |
| 346 | 4.45 | Fluke Meter | item345 | 1 | Nos |
| 347 | 4.46 | Switch with POE ports | item346 | 1 | Nos |
| 348 | 4.47 | POE adapters | item347 | 1 | Nos |
| 349 | 4.48 | Fibre Optics cable with LC connector | item348 | 1 | Nos |
| 350 | 4.49 | LC connector module | item349 | 1 | Nos |
| 351 | 4.5 | Neon tester 500 V. 500 V | item350 | 1 | Nos |
| 352 | 4.51 | Screwdriver set Set of 7 | item351 | 1 | Nos |
| 353 | 4.52 | Insulated combination pliers 150 mm | item352 | 1 | Nos |
| 354 | 4.53 | Insulated side cutting pliers 150 mm | item353 | 1 | Nos |
| 355 | 4.54 | Long nose pliers 150 mm | item354 | 1 | Nos |
| 356 | 4.55 | Soldering iron 25-Watt, 240 Volt | item355 | 1 | Nos |
| 357 | 4.56 | Electrician knife 100 mm | item356 | 1 | Nos |
| 358 | 4.57 | Tweezers 150 mm | item357 | 1 | Nos |
| 359 | 4.58 | Soldering Iron Changeable bits 15-Watt, 240 Volt | item358 | 1 | Nos |
| 360 | 4.59 | De- soldering pump electrical heated, manual operators 230 V, 40 W | item359 | 1 | Nos |
| 361 | 4.6 | Precision set of screw drivers T5, T6, T7 | item360 | 1 | Nos |
| 362 | 4.61 | Tweezers – Bend tip | item361 | 1 | Nos |
| 363 | 4.62 | Plier - Flat Nose 150 mm | item362 | 1 | Nos |
| 364 | 4.63 | Chisel - Cold - Flat 10 mm X 150 mm | item363 | 1 | Nos |
| 365 | 4.64 | Hand Drill Machine Electric with Hammer Action 13 mm | item364 | 1 | Nos |
| 366 | 4.65 | First aid kit | item365 | 1 | Nos |
| 367 | 4.66 | Bench Vice - 125 mm | item366 | 1 | Nos |
| 368 | 4.67 | Bench Vice - 100 mm | item367 | 1 | Nos |
| 369 | 4.68 | Bench Vice - 50 mm | item368 | 1 | Nos |
| 370 | 4.69 | DC Regulated Variable Programmable DC Power Supply 0-30V/3A | item369 | 1 | Nos |
| 371 | 4.7 | LCR meter (Digital) Handheld | item370 | 1 | Nos |
| 372 | 4.71 | Clamp meter 0 - 10 A | item371 | 1 | Nos |
| 373 | 4.72 | Function generator (DDS Technology (Sine, Square, Triangle, Ramp, Pulse, Serial Data, TTL and Modulation.) 1 mHz -10 MHz Function-Pulse – Modulation Generator with Built- in 40MHz Frequency Counter | item372 | 1 | Nos |
| 374 | 4.73 | Autotransformer 15 Amps | item373 | 1 | Nos |
| 375 | 4.74 | Analog Component Trainer Breadboard for Circuit design with necessary\nDC /AC power supply:\n? 8 pin ZIF socket\n? 16 pin ZIF socket\n? Resistor bank\n? Capacitor bank\n? Potentiometers\n? Diodes\n? Zener diodes\n? NPN Transistor\n? N-channel MOSFET\n? LED\n? Bread board\n? Ready to use Experimental Boards\nLab Manual with list of experiments to perform various experiments | item374 | 1 | Nos |
| 376 | 4.75 | Milli Ammeter (AC) 0 – 200 Ma | item375 | 1 | Nos |
| 377 | 4.76 | Milli Ammeter (DC) 0 – 500 mA | item376 | 1 | Nos |
| 378 | 4.77 | Digital and AnalogIC Tester | item377 | 1 | Nos |
| 379 | 4.78 | POWER ELECTRONICS TRAINER\nwith at least 6 nos. of application board MOSFET Characteristics SCR Characteristics\nSCR Lamp Flasher SCR Alarm Circuit Series Inverter\nSingle Phase PWM Inverter | item378 | 1 | Nos |
| 380 | 4.79 | INTERNET BROADBAND\nCONNECTION | item379 | 1 | Nos |
| 381 | 4.8 | Different types of electronic and electrical cables, connectors, sockets,\nterminations. | item380 | 1 | Nos |
| 382 | 4.81 | Different types of Analog electronic components, digital ICs, power electronic components, general purpose\nPCBs, bread board, MCB, ELCB | item381 | 1 | Nos |
| 383 | 4.82 | SMD Soldering & De-soldering Station with necessary accessories SMD Rework Station\nSoldering station:\nOutput Voltage: 26V – 40V AC Temp Range: 50 to 4800 C Desoldering Station:\nOutput Voltage: 24V – 40V AC Vacuum Generator:\nVacuum pump: double cylinder type Vacuum Pressure: 80 k Pa\nSuction flow: 15 L/min. Hot air station:\nAir flow: 1-9 L/min Temp:50 o 500 °C\nHand piece of Hot air accessories | item382 | 1 | Nos |
| 384 | 4.83 | Application kits for Microcontrollers 6 different applications 1. Input Interface: 4x4 Matrix Keypad, ASCII Key PAD, Four Input Switch\n2. Display Module 16X2 LCD, Seven Segment, LED Bar Graph\n3. ADC/DAC Module with most popular DC/DAC0808\n4. PC Interface: RS232 & USB\n5. Motor Drive: DC, Servo, Stepper\n6. DAQ: Data Acquisition to sense\ndifferent sensors signals | item383 | 1 | Nos |
| 385 | 4.84 | Various analog and digital ICs useful for doing project works mentioned in the digital and\nanalog IC applications modules | item384 | 1 | Nos |
| 386 | 4.85 | Seven segment DPM trainer | item385 | 1 | Nos |
| 387 | 4.86 | UPS trainer PWM switching technology, Test points to measures the voltages of different sections Overall functioning of UPS Trainer, AVR transformer, UPS with load condition | item386 | 1 | Nos |
| 388 | 4.87 | CCTV set up DVR- Cameras with amplifier set up | item387 | 1 | Nos |
| 389 | 4.88 | Washing machine Auto and semi-automatic | item388 | 1 | Nos |
| 390 | 4.89 | Vacuum cleaner Portable and industry model | item389 | 1 | Nos |
| 391 | 4.9 | LCD TV (Trainer kit) 21-inch full HD LCD Color Television should support PAL/ NTSC video formats Complete block diagram of a LCD TV system, Study board indicating various sections of LCD TV along with the test points and switch faults | item390 | 1 | Nos |
| 392 | 4.91 | Printers DMP, laser,deskjet | item391 | 1 | Nos |
| 393 | 4.92 | L ED/LCD Projector | item392 | 1 | Nos |
| 394 | 4.93 | SAT meter | item393 | 1 | Nos |
| 395 | 4.94 | Co- Axial cable cutter | item394 | 1 | Nos |
| 396 | 4.95 | LCD TV 21” screen smart TV, with different inputs (HDMI, VGA, component video etc.) | item395 | 1 | Nos |
| 397 | 4.96 | Centre conductor cleaner | item396 | 1 | Nos |
| 398 | 4.97 | Universal drop trimmer for RG 6/11 cables | item397 | 1 | Nos |
| 399 | 4.98 | F - connector tool for RG 6/11\ncables | item398 | 1 | Nos |
| 400 | 4.99 | F – connector compression tool for RG 6/11 cables | item399 | 1 | Nos |
| 401 | 5 | LED TV 21” screen smart TV, with different inputs (HDMI, VGA, component video) | item400 | 1 | Nos |
| 402 | 5.01 | Solar Training Kit/ Simulator With built in meters for DCV, DCA, AC multifunction Meter (for ACI, ACV, Power,Frequency), Protection Circuits, BS-10 terminals for making the connection, Single/ Dual axis tracking system Charge Controller: PWM based MPPT, Charging Stage: Bulk, Absorptions and Float | item401 | 1 | Nos |
| 403 | 5.02 | Instructor’s table | item402 | 1 | Nos |
| 404 | 5.03 | Black board/white board 12’ x 4’ | item403 | 1 | Nos |
| 405 | 5.04 | Classroom furniture (dual\ndesk) | item404 | 1 | Nos |
| 406 | 5.05 | Lab tables (work bench) | item405 | 1 | Nos |
| 407 | 5.06 | Stools for lab | item406 | 1 | Nos |
| 408 | 5.07 | Rule steel 24" (600 mm.) | item407 | 1 | Nos |
| 409 | 5.08 | Drawing Board Imperial size | item408 | 1 | Nos |
| 410 | 5.09 | Rule wooden (Consumable) 24" (600 mm.) | item409 | 1 | Nos |
| 411 | 5.1 | Brush Round Short Hair- (Consumable) 0 to 12 No. | item410 | 1 | Nos |
| 412 | 5.11 | Brush Flat Short Hair - (Consumable) 0 to 12 No. | item411 | 1 | Nos |
| 413 | 5.12 | Varnish Brush soft hair- (Consumable) 25mm, 50mm, 75mm, 100mm | item412 | 1 | Nos |
| 414 | 5.13 | Colour Pallet for water colour (Consumable) Big size | item413 | 1 | Nos |
| 415 | 5.14 | Stencil/ Paper Cutter (Consumable) medium size | item414 | 1 | Nos |
| 416 | 5.15 | T' Square Imperial size | item415 | 1 | Nos |
| 417 | 5.16 | Easel 'a' Type stand | item416 | 1 | Nos |
| 418 | 5.17 | Square Blade 150 mm | item417 | 1 | Nos |
| 419 | 5.18 | Hammer (Crass Pin) | item418 | 1 | Nos |
| 420 | 5.19 | Hammer (Claw) | item419 | 1 | Nos |
| 421 | 5.2 | Drill Bits (Consumable) 3 mm, 5mm, 8mm, 10mm, 12mm | item420 | 1 | Nos |
| 422 | 5.21 | Chisel Knife- 5mm, 8mm, 10mm, 20mm, 30mm | item421 | 1 | Nos |
| 423 | 5.22 | Paint Tin Opener | item422 | 1 | Nos |
| 424 | 5.23 | Shave Huck Knife | item423 | 1 | Nos |
| 425 | 5.24 | Glider Knife | item424 | 1 | Nos |
| 426 | 5.25 | Paint Burner (Acetylene Gas) | item425 | 1 | Nos |
| 427 | 5.26 | Scaffolding (Movable) H 2000mm x W 1400mm x L 2000mm. | item426 | 1 | Nos |
| 428 | 5.27 | working Bench 240 cm X 120 cm X 75 cm | item427 | 1 | Nos |
| 429 | 5.28 | Mild Steel Panels 300 mm X 200 mm (18 X 22 SWG) | item428 | 1 | Nos |
| 430 | 5.29 | Sink (Stainless steel) H 250mm x W 450mm x L 600mm. | item429 | 1 | Nos |
| 431 | 5.3 | Suction feed spray gun with accessories. 1 Ltr. Capacity of cup | item430 | 1 | Nos |
| 432 | 5.31 | Infra red lamp | item431 | 1 | Nos |
| 433 | 5.32 | Digital DFT meter | item432 | 1 | Nos |
| 434 | 5.33 | Pneumatic Polishing Machine with Pads | item433 | 1 | Nos |
| 435 | 5.34 | Face Mask & Respirator (Consumable) | item434 | 1 | Nos |
| 436 | 5.35 | Hacksaw | item435 | 1 | Nos |
| 437 | 5.36 | Pipe wrench 10''& 16'' | item436 | 1 | Nos |
| 438 | 5.37 | flat file- smooth finish 12" | item437 | 1 | Nos |
| 439 | 5.38 | Circular cut file 12" | item438 | 1 | Nos |
| 440 | 5.39 | Raft cut 12" | item439 | 1 | Nos |
| 441 | 5.4 | Pipe die set metric & Inches Fine pitch | item440 | 1 | Nos |
| 442 | 5.41 | Gun Spray with Gravity Feed Cup with Complete accessories with Complete accessories (Capacity- ¼ ltr. ,1/2 ltr. , 1/3ltr. , 1 ltr. ) | item441 | 1 | Nos |
| 443 | 5.42 | Conventional Spray Gun For Pressure Feed with complete accessories | item442 | 1 | Nos |
| 444 | 5.43 | Electric spray gun with complete accessories | item443 | 1 | Nos |
| 445 | 5.44 | Comb Gauge | item444 | 1 | Nos |
| 446 | 5.45 | Pencil Hardness Tester | item445 | 1 | Nos |
| 447 | 5.46 | Digital Weight Machine Capacity 5 kg. weighing scale | item446 | 1 | Nos |
| 448 | 5.47 | Pressure Feed Container with Conventional 20 ltr. Capacity with Complete accessories | item447 | 1 | Nos |
| 449 | 5.48 | Electrostatic spray Gun unit with complete accessories | item448 | 1 | Nos |
| 450 | 5.49 | Airless Spray Gun unit with complete accessories | item449 | 1 | Nos |
| 451 | 5.5 | Sealer Drum Press Pump with Sealer Gun Assembly with complete accessories | item450 | 1 | Nos |
| 452 | 5.51 | Side Draught Dry Paint Booth- Overall Dimensions (mm): 1580(W) x 2250(D) x 3200(H); Working Dimensions (mm): 1500(W) x 1320(D) x 2040(H) | item451 | 1 | Nos |
| 453 | 5.52 | Power Coating set up with Gun booth & Oven | item452 | 1 | Nos |
| 454 | 5.53 | Stool | item453 | 1 | Nos |
| 455 | 5.54 | Desk with Locker | item454 | 1 | Nos |
| 456 | 5.55 | Metal Shelving Rack Open Type 1800 x 900 x 500 mm with 4 Adjustable Shelves | item455 | 1 | Nos |
| 457 | 5.56 | Green Glass Board 6'X4' | item456 | 1 | Nos |
| 458 | 5.57 | Instructor table and | item457 | 1 | Nos |
| 459 | 5.58 | Computers with Accessories CPU: 32/64 Bit i3/i5/i7 or latest processor, Speed: 3 GHz or Higher. RAM:-4 GB DDR-III or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, with USB Mouse, USB Keyboard and Monitor (Min. 17 Inch) Licensed Operating System and Antivirus compatible with trade\nrelated software. | item458 | 1 | Nos |
| 460 | 5.59 | Students Chair | item459 | 1 | Nos |
| 461 | 5.6 | Anti Virus (Latest Version) | item460 | 1 | Nos |
| 462 | 5.61 | Scanner High Resolution | item461 | 1 | Nos |
| 463 | 5.62 | Printer Lager/colour | item462 | 1 | Nos |
| 464 | 5.63 | Software Card Draw / Page Make/ Photo Shop / Shree Lippi / ISM / Acee - Dcee Viewer (Latest Version) | item463 | 1 | Nos |
| 465 | 5.64 | Camera Digital Higher megapixel with Tri - Pod | item464 | 1 | Nos |
| 466 | 5.65 | Radium Plotter and cutter with stand complete accessories 48" | item465 | 1 | Nos |
| 467 | 5.66 | Rule Steel 300 mm both in inch and mm | item466 | 1 | Nos |
| 468 | 5.67 | Rule Wooden 4 fold 600 mm | item467 | 1 | Nos |
| 469 | 5.68 | Hacksaw Frame adjustable 250 to 300 mm | item468 | 1 | Nos |
| 470 | 5.69 | Scriber 200 mm | item469 | 1 | Nos |
| 471 | 5.7 | Centre punch 100 mm | item470 | 1 | Nos |
| 472 | 5.71 | Chisel Cold, flat 20 mm | item471 | 1 | Nos |
| 473 | 5.72 | Hammer ball peen 800 grams | item472 | 1 | Nos |
| 474 | 5.73 | Hammer ball peen 50 grams | item473 | 1 | Nos |
| 475 | 5.74 | File flat rough 300 mm | item474 | 1 | Nos |
| 476 | 5.75 | Level spirit wooden 300 mm | item475 | 1 | Nos |
| 477 | 5.76 | Plumb bob 50 grams | item476 | 1 | Nos |
| 478 | 5.77 | Trowel C-125-I S: 6013 | item477 | 1 | Nos |
| 479 | 5.78 | Stillson wrench 200 & 350 mm | item478 | 1 | Nos |
| 480 | 5.79 | Screw Driver 250 mm | item479 | 1 | Nos |
| 481 | 5.8 | Wooden Mallet small I S: 2022 | item480 | 1 | Nos |
| 482 | 5.81 | Cutting pliers 200mm I S : 3650 | item481 | 1 | Nos |
| 483 | 5.82 | Steel tape 5m | item482 | 1 | Nos |
| 484 | 5.83 | File Half Round, Rough 300 mm | item483 | 1 | Nos |
| 485 | 5.84 | Stove melting solder | item484 | 1 | Nos |
| 486 | 5.85 | Brush Steel Wire 150X 50 mm | item485 | 1 | Nos |
| 487 | 5.86 | Soil pot with brush | item486 | 1 | Nos |
| 488 | 5.87 | Bending Spring | item487 | 1 | Nos |
| 489 | 5.88 | Plumbers' metal melting pot 10 kg | item488 | 1 | Nos |
| 490 | 5.89 | Pipe stock and dies complete with stocks, bushing, bushing holders, Taps and wrenches sizes covered, to suit pipes bore dia 6,8,10,20,25,32,40, & 50 mm | item489 | 1 | Nos |
| 491 | 5.9 | with over head cistern | item490 | 1 | Nos |
| 492 | 5.91 | Sight rail and bonning rod | item491 | 1 | Nos |
| 493 | 5.92 | Ring guage 15 mm,20mm,25mm,32mm | item492 | 1 | Nos |
| 494 | 5.93 | M.S FLAT | item493 | 1 | Nos |
| 495 | 5.94 | M.S ROD | item494 | 1 | Nos |
| 496 | 5.95 | GI pipe "B" grade ½"Ø, ¾"Ø, 1"Ø | item495 | 1 | Nos |
| 497 | 5.96 | GI pipe fittings Socket\nTee Bend Union\nHex Nipple ½"Ø, ¾"Ø, 1"Ø | item496 | 1 | Nos |
| 498 | 5.97 | Wooden plank 50mm x 25 mm x 1 m 100mm x 25mm x 1 m | item497 | 1 | Nos |
| 499 | 5.98 | MS gas welding filler rod | item498 | 1 | Nos |
| 500 | 5.99 | Wire cut clay bricks | item499 | 1 | Nos |
| 501 | 6 | River sand AFS no.100 ~ 40 | item500 | 1 | Nos |
| 502 | 6.01 | Stone aggregate | item501 | 1 | Nos |
| 503 | 6.02 | Cement portland | item502 | 1 | Nos |
| 504 | 6.03 | Copper tubes 6 mm Ø, 25 mm Ø | item503 | 1 | Nos |
| 505 | 6.04 | Copper brazing filler rod | item504 | 1 | Nos |
| 506 | 6.05 | PVC pipes heavy duty (suitable to use dies and tap) ½"Ø, ¾"Ø, 1"Ø, 1½"Ø, 2"Ø , 4"Ø, 6" Ø | item505 | 1 | Nos |
| 507 | 6.06 | PVC pipe light duty ½"Ø, ¾"Ø, 1"Ø, 1½"Ø, 2"Ø | item506 | 1 | Nos |
| 508 | 6.07 | PVC fittings - reducer FTA Reducer, Plain coupling, TEE, Bend, Elbow, MTA, FTA , socket ½"Ø, ¾"Ø, 1"Ø, 1½"Ø, 2"Ø , 4"Ø, 6" Ø | item507 | 1 | Nos |
| 509 | 6.08 | C.PVC pipe 20 mm Ø | item508 | 1 | Nos |
| 510 | 6.09 | PPR pipe 20mm Ø | item509 | 1 | Nos |
| 511 | 6.1 | AC pressure pipe coupling 100 mm Ø | item510 | 1 | Nos |
| 512 | 6.11 | CI water supply pile bell and spigot end | item511 | 1 | Nos |
| 513 | 6.12 | CI water supply pipe flanged end | item512 | 1 | Nos |
| 514 | 6.13 | Wheel valve | item513 | 1 | Nos |
| 515 | 6.14 | Globe valve | item514 | 1 | Nos |
| 516 | 6.15 | PVC ball valve | item515 | 1 | Nos |
| 517 | 6.16 | Water tap/ PVC, S.S, Brass size ½", ¾", 1" | item516 | 1 | Nos |
| 518 | 6.17 | Non- return valve, Air valve | item517 | 1 | Nos |
| 519 | 6.18 | M.S flange | item518 | 1 | Nos |
| 520 | 6.19 | C.I.D joint 100mm | item519 | 1 | Nos |
| 521 | 6.2 | Lubricating oil | item520 | 1 | Nos |
| 522 | 6.21 | Lead | item521 | 1 | Nos |
| 523 | 6.22 | Spum yarn | item522 | 1 | Nos |
| 524 | 6.23 | Oxygen gas | item523 | 1 | Nos |
| 525 | 6.24 | Acetylene gas | item524 | 1 | Nos |
| 526 | 6.25 | Water meter | item525 | 1 | Nos |
| 527 | 6.26 | PVC bend 100 mm | item526 | 1 | Nos |
| 528 | 6.27 | PVC Y branch 100 mm | item527 | 1 | Nos |
| 529 | 6.28 | PVC Dod bend 100 mm | item528 | 1 | Nos |
| 530 | 6.29 | PVC pipe sloe | item529 | 1 | Nos |
| 531 | 6.3 | C.P piller tap 15 mm | item530 | 1 | Nos |
| 532 | 6.31 | C.P waste coupling 35 mm | item531 | 1 | Nos |
| 533 | 6.32 | PVC waste pipe 32 mm | item532 | 1 | Nos |
| 534 | 6.33 | Rock bolt | item533 | 1 | Nos |
| 535 | 6.34 | PVC connection flexible tube | item534 | 1 | Nos |
| 536 | 6.35 | Hot and cold water mixer tap | item535 | 1 | Nos |
| 537 | 6.36 | PPR pipe fittings PPR - TEE 20 mm PPR - Elbow 20 mm | item536 | 1 | Nos |
| 538 | 6.37 | PVC floor trap | item537 | 1 | Nos |
| 539 | 6.38 | PVC gully trap | item538 | 1 | Nos |
| 540 | 6.39 | PVC multi trap | item539 | 1 | Nos |
| 541 | 6.4 | PVC multi floor trap | item540 | 1 | Nos |
| 542 | 6.41 | White cement | item541 | 1 | Nos |
| 543 | 6.42 | P O P (Plaster of Paris) | item542 | 1 | Nos |
| 544 | 6.43 | Gasket's etc | item543 | 1 | Nos |
| 545 | 6.44 | Push lock | item544 | 1 | Nos |
| 546 | 6.45 | File flat rough double cut 200 mm | item545 | 1 | Nos |
| 547 | 6.46 | File, half round, fine double cut, length 150mm | item546 | 1 | Nos |
| 548 | 6.47 | File, round, fine double cut length 150mm | item547 | 1 | Nos |
| 549 | 6.48 | File flat, fine double cut, length 150mm | item548 | 1 | Nos |
| 550 | 6.49 | File square, fine double cut, length 150mm | item549 | 1 | Nos |
| 551 | 6.5 | File triangular fine double cut length 150mm | item550 | 1 | Nos |
| 552 | 6.51 | Scriber 150mm length | item551 | 1 | Nos |
| 553 | 6.52 | Try square 150 mm | item552 | 1 | Nos |
| 554 | 6.53 | Divider spring joint length 150mm | item553 | 1 | Nos |
| 555 | 6.54 | Caliper spring joint in side length 150mm | item554 | 1 | Nos |
| 556 | 6.55 | Caliper, odd leg, spring joint length 150mm | item555 | 1 | Nos |
| 557 | 6.56 | Hammer ball pane 220 gms | item556 | 1 | Nos |
| 558 | 6.57 | Cold Chisel flat and cross cut length 150mm | item557 | 1 | Nos |
| 559 | 6.58 | Engineers rule 300mm long | item558 | 1 | Nos |
| 560 | 6.59 | Tape measuring 10m graduation in mm | item559 | 1 | Nos |
| 561 | 6.6 | Pliers combination insulated length 200mm | item560 | 1 | Nos |
| 562 | 6.61 | Pliers long nose 200 mm | item561 | 1 | Nos |
| 563 | 6.62 | Pliers flat nose 150 mm | item562 | 1 | Nos |
| 564 | 6.63 | Line tester 500 v heavy duty | item563 | 1 | Nos |
| 565 | 6.64 | Tweezers 10 cm | item564 | 1 | Nos |
| 566 | 6.65 | Bench vice 150 to 300mm jaw | item565 | 1 | Nos |
| 567 | 6.66 | Hack saw tubular metal frame adjustable 300 mm | item566 | 1 | Nos |
| 568 | 6.67 | Snip sheet metal straight nose 200 mm | item567 | 1 | Nos |
| 569 | 6.68 | Snip sheet metal curved nose 200 mm | item568 | 1 | Nos |
| 570 | 6.69 | Soldering iron exchangeable copper tip 65 watts | item569 | 1 | Nos |
| 571 | 6.7 | Knife folded stainless steel - 150 mm | item570 | 1 | Nos |
| 572 | 6.71 | Fire extinguisher ABC dry powder type 2 kg capacity | item571 | 1 | Nos |
| 573 | 6.72 | Fire buckets 10 Litre | item572 | 1 | Nos |
| 574 | 6.73 | Quick couples, process tube adopter ¼” & 3/8” | item573 | 1 | Nos |
| 575 | 6.74 | Tong Close mouth and pick | item574 | 1 | Nos |
| 576 | 6.75 | Ring spanner off set 4.7mm to 16mm | item575 | 1 | Nos |
| 577 | 6.76 | (Hollo) Punch hole for cutting gasket 4.7-16mm die | item576 | 1 | Nos |
| 578 | 6.77 | Refrigerant cylinder 2.5 Kg | item577 | 1 | Nos |
| 579 | 6.78 | Torque Wrench 300mm-12.7mm | item578 | 1 | Nos |
| 580 | 6.79 | Piercing Valve ¼ Inch | item579 | 1 | Nos |
| 581 | 6.8 | Feeler gauge 0.05mm to 1mm | item580 | 1 | Nos |
| 582 | 6.81 | Four way reversible valve | item581 | 1 | Nos |
| 583 | 6.82 | Vernier hight gauge 300mm ,LC 0.02 | item582 | 1 | Nos |
| 584 | 6.83 | C.R.O Dual trace/ Double beam 60 MHZ | item583 | 1 | Nos |
| 585 | 6.84 | Service man thermometer in metal case - 300C to +1100 C | item584 | 1 | Nos |
| 586 | 6.85 | Electronic leak detector | item585 | 1 | Nos |
| 587 | 6.86 | Sling psychro meter mounted on aluminum back, scale -100 C to +1100 C | item586 | 1 | Nos |
| 588 | 6.87 | Micron vacuum gauge capable of reading up to 20 microns | item587 | 1 | Nos |
| 589 | 6.88 | Sensor thermometer (digital) -50 degree Celsius to150 degree Celsius | item588 | 1 | Nos |
| 590 | 6.89 | Digital weighing machine 100 kg | item589 | 1 | Nos |
| 591 | 6.9 | Split phase induction motor 1hp, 230 V | item590 | 1 | Nos |
| 592 | 6.91 | Capacitor start induction motor 1 Hp, 230 V | item591 | 1 | Nos |
| 593 | 6.92 | Single door direct cool refrigerator, carrying with HFC and HC 185 L | item592 | 1 | Nos |
| 594 | 6.93 | Three/four door refrigerator ( Inverter type) 300L carrying with HC R-600a | item593 | 1 | Nos |
| 595 | 6.94 | Core drill machine. | item594 | 1 | Nos |
| 596 | 6.95 | Evacuating and refrigerant charging station, consist of\na) Rotary two stage vacuum pump and motor (with gas ballast and anti such back)\nb) manifold with gauges and\nvalves and capable of pulling vacuum up to 50 microns of Hg and with provision of connecting to a microns level vacuum gauge b)Graduated charging cylinder with provision for temperature correction and all necessary\nisolating valves (CAP. 2 kg. In lieu of (b) above and with accuracy\nof + / - g for charging hydrocarbons) | item595 | 1 | Nos |
| 597 | 6.96 | Evacuating and charging station as above but fitted with weighing scale | item596 | 1 | Nos |
| 598 | 6.97 | Window A.C 1 Ton with R-22 Blend reciprocating compressor | item597 | 1 | Nos |
| 599 | 6.98 | Split A.C 1.5 Ton with R134a or R-22 reciprocating compressor | item598 | 1 | Nos |
| 600 | 6.99 | Recovery unit with cylinders CFC, HFC & HCFC | item599 | 1 | Nos |
| 601 | 7 | Decibel meter 30-100 db | item600 | 1 | Nos |
| 602 | 7.01 | Cassette Air conditioner 4500 kcal/hr | item601 | 1 | Nos |
| 603 | 7.02 | De scaling pump set with stainless steel impeller and housing complete with motor 1/2 hp and accessories | item602 | 1 | Nos |
| 604 | 7.03 | Fan coil unit with water valves (2 & 3 way) | item603 | 1 | Nos |
| 605 | 7.04 | Shell and tube, DX chillers (small) 5 Ton with Cu tubing only | item604 | 1 | Nos |
| 606 | 7.05 | Refrigerant Cylinder 10 kg capacity | item605 | 1 | Nos |
| 607 | 7.06 | Water dispenser bubble type (Hot and Cold) 2.5 to 3ltr. Delivery capacity per hour | item606 | 1 | Nos |
| 608 | 7.07 | Storage type water cooler( hot and cold) | item607 | 1 | Nos |
| 609 | 7.08 | Visi cooler 185 L | item608 | 1 | Nos |
| 610 | 7.09 | Split A/C ( inverter technology) 1.5 TR | item609 | 1 | Nos |
| 611 | 7.1 | Absorption system Small size | item610 | 1 | Nos |
| 612 | 7.11 | Class room table One table for each trainee size of 2.5 provisions with open rack. Frame square conduit of1".top sun mica ply board | item611 | 1 | Nos |
| 613 | 7.12 | Work bench 2000 x1000 x 700 mm with 2" pipe frame. Top with teak slab and fixing with3/4" good quality rubber sheet. | item612 | 1 | Nos |
| 614 | 7.13 | Almirah 195 x90 x 48 cm outer sheet 20 SWG inner partition with four selves of 22Swg | item613 | 1 | Nos |
| 615 | 7.14 | Lockers 195 x 90 x 48 set six locker in one structure | item614 | 1 | Nos |
| 616 | 7.15 | Glass board portable 2.5'X4' with stand | item615 | 1 | Nos |
| 617 | 7.16 | Instructor chair Standard revolving with wheel | item616 | 1 | Nos |
| 618 | 7.17 | Computer table Standard with drawers & self to accommodate UPS & CPU | item617 | 1 | Nos |
| 619 | 7.18 | Computer chair Revolving type metal based & metal wheel standard one | item618 | 1 | Nos |
| 620 | 7.19 | White board 4'X3' ferrous base sheet to hold magnetic duster with white finish surface. | item619 | 1 | Nos |
| 621 | 7.2 | Chart stand 6'X3' providing with hanging clip top & bottom plate | item620 | 1 | Nos |
| 622 | 7.21 | Computer with printer and scanner Latest configuration | item621 | 1 | Nos |
| 623 | 7.22 | Copier machine. | item622 | 1 | Nos |
| 624 | 7.23 | Interactive Board Latest version | item623 | 1 | Nos |
| 625 | 7.24 | Stool 2’ x 1.5’ | item624 | 1 | Nos |
| 626 | 7.25 | Book Self with glass panel 6’ x 3’ | item625 | 1 | Nos |
| 627 | 7.26 | Storage rack 6’ x 3’ | item626 | 1 | Nos |
| 628 | 7.27 | Storage shelf 6’ x 3’ | item627 | 1 | Nos |
| 629 | 7.28 | Welding helmet fiber | item628 | 1 | Nos |
| 630 | 7.29 | Welding hand shield fiber | item629 | 1 | Nos |
| 631 | 7.3 | Chipping hammer with metal handle 250 Grams | item630 | 1 | Nos |
| 632 | 7.31 | Chisel cold flat 19 mm x 150 mm | item631 | 1 | Nos |
| 633 | 7.32 | Centre punch 9 mm x 127 mm | item632 | 1 | Nos |
| 634 | 7.33 | Dividers 200 mm | item633 | 1 | Nos |
| 635 | 7.34 | Stainless steel rule 300mm | item634 | 1 | Nos |
| 636 | 7.35 | Scriber 150 mm double point | item635 | 1 | Nos |
| 637 | 7.36 | Flat Tongs 350mm long | item636 | 1 | Nos |
| 638 | 7.37 | Hack saw frame fixed 300 mm | item637 | 1 | Nos |
| 639 | 7.38 | File half round bastard 300 mm | item638 | 1 | Nos |
| 640 | 7.39 | File flat 350 mm bastard | item639 | 1 | Nos |
| 641 | 7.4 | Hammer ball pane 1 kg with handle | item640 | 1 | Nos |
| 642 | 7.41 | Tip Cleaner | item641 | 1 | Nos |
| 643 | 7.42 | Try square 6” | item642 | 1 | Nos |
| 644 | 7.43 | GMAW welding machine 400A capacity with air cooled torch, Regulator, Gas pre-heater, Gas hose and Standard accessories | item643 | 1 | Nos |
| 645 | 7.44 | Air compressor suitable for above air\nplasma cutting system. | item644 | 1 | Nos |
| 646 | 7.45 | and medium grain size grinding\nwheels | item645 | 1 | Nos |
| 647 | 7.46 | Suitable Arc welding table with positioner | item646 | 1 | Nos |
| 648 | 7.47 | Oxy Acetylene Gas cutting blow pipe | item647 | 1 | Nos |
| 649 | 7.48 | Welding Simulators for\nSMAW/GTAW/GMAW | item648 | 1 | Nos |
| 650 | 7.49 | Leather Hand Gloves 14” | item649 | 1 | Nos |
| 651 | 7.5 | Cotton hand Gloves 8” | item650 | 1 | Nos |
| 652 | 7.51 | Leather Apron leather | item651 | 1 | Nos |
| 653 | 7.52 | S.S Wire brush 5 rows and 3 rows | item652 | 1 | Nos |
| 654 | 7.53 | Safety boots for welders | item653 | 1 | Nos |
| 655 | 7.54 | Leg guards leather | item654 | 1 | Nos |
| 656 | 7.55 | Arc welding cables multi cored copper 400/ 600 amp as per BIS | item655 | 1 | Nos |
| 657 | 7.56 | Students chairs with writing pads | item656 | 1 | Nos |
| 658 | 7.57 | Instructor’s laptop with latest configuration pre-loaded with operating system and MS Office package. | item657 | 1 | Nos |
| 659 | 7.58 | Welding Process, Inspection & codes\nDVD/ CDs. | item658 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
