}

Special Repair To Basketball Court In Mg And G Area Sig Coy , Special Repairs / Replacement Of Wiring And Mcb/Dbs In Bldg No . 104/7 And 8 At Homi Bhabha Road And Certain Revenue Works Under Ge West Colaba Mumbai, GE (West) Colaba, Mumbai-Maharashtra

Military Engineer Services-MES has published Special Repair To Basketball Court In Mg And G Area Sig Coy , Special Repairs / Replacement Of Wiring And Mcb/Dbs In Bldg No . 104/7 And 8 At Homi Bhabha Road And Certain Revenue Works Under Ge West Colaba Mumbai. Submission Date for this Tender is 19-04-2021. Electrification Work Tenders in GE (West) Colaba, Mumbai Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

27472425
Corrigendum : Special Repair To Basketball Court In Mg And G Area Sig Coy , Special Repairs / Replacement Of Wiring And Mcb/Dbs In Bldg No . 104/7 And 8 At Homi Bhabha Road And Certain Revenue Works Under Ge West Colaba Mumbai
Open Tender
Indian
Maharashtra
GE (West) Colaba, Mumbai
19-04-2021

Tender Details

Special Repair To Basketball Court In Mg And G Area Sig Coy , Special Repairs / Replacement Of Wiring And Mcb/Dbs In Bldg No . 104/7 And 8 At Homi Bhabha Road And Certain Revenue Works Under Ge West Colaba Mumbai

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 27-Mar-2021 BOQ BOQ 12-04-2021
2 12-Apr-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 19-04-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 85000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work :SPECIAL REPAIR TO BASKETBALL COURT IN MG AND G AREA SIG COY, SPECIAL REPAIRS / REPLACEMENT OF WIRING AND MCB/DBS IN BLDG NO. 104/7 & 8 AT HOMI BHABHA ROAD AND CERTAIN REVENUE WORKS UNDER GE (WEST) COLABA MUMBAI.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Demolition of cement concrete in ground floor and paving not exceeding 15cm thick (below or above ground level) and removing from site of work to out side MoD land etc complete all as specified and directed. 102 CUBIC METRE
2 2 Material and labour for Ready mix cement concrete M-30 (20 mm graded aggregate) as in floors of basket ball court, hardstanding to floors, finished even and smooth including formwork complete all as specified and directed including provision of construction joints complete all as specified and directed. 113.2 CUBIC METRE
3 3 Removing excavated material not exceeding 50 m and deposting where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. 111.3 CUBIC METRE
4 4 Supply and fixing in repair existing basket ball poles comprised of a hoop (net) attached to a flat blackboard (vertical glass board). Regulation basket ball hoops are suspended 3.05 m from from tha playing surface and have a standard rim diameter of 46 cm. The vertical blackboard surface is made of plexiglass or tempered glass to prevent shattering and is sized at 110 x 183 cm . Basket ball rims are manufactured from high tensile carbon steel to provide the ball with with the correct amount of bounce while also give for players that can dunk all including painting work complete all as specified and directed. 2 EACH
5 5 Material and labour for marking of Baselines, Endlines, side lines, free through lines, mid court lines, three point arc/line with three coats of epoxy paint all as per National Basketball Association (NBA) specification complete all as specified and directed. 1 EACH JOB
6 6 Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar complete all as specified and directed. 1 CUBIC METRE
7 7 Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. 6 CUBIC METRE
8 8 Excavating in post holes (or similar holes) in soft/loose soil ech not exceeding 0.5 cum, getting out, returning, filling in, removing surplus soil to distance not exceeding 50m and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and directed. 16 EACH
9 9 Returning, filling in, including spreading, levelling, watering & well ramming in layers not exceeding 25 cm complete all as specified and directed . 30.3 CUBIC METRE
10 10 Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius built in CM (1:6) complete all as specified and directed. 23 CUBIC METRE
11 11 Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete, base foundation of street light poles etc. complete all as specified and directed. 1.06 CUBIC METRE
12 12 Material and labour for PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in coping, bed conc, post holes and all other similar works including necessary formwork complete all as specified and directed. 0.9 CUBIC METRE
13 13 Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc and removing debries out side MoD land complete all as specified and directed. 60 SQUARE METRE
14 14 Material and labour for 15 mm thick rendering in CM (1:6) on fair faces of brick work and finished the surface even & smooth (without using extra cement) etc. complete all as specified and directed. 60 SQUARE METRE
15 15 Material and labour for Framed work such as grills, gratings, doors or gates of angle or other section etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 500 KILOGRAM
16 16 Supply and fixing Rolled Mild steel joist, channel, angle, tee sections and MS flats fixed independently, without connection plate, etc (cut to ordinary lengths ie. Within 20mm of length indicated) for purlins fixed to wooden rafters and gratings over drain all other similar works conforming to Fe 410 W (Gde - E-250) quality A complete all as specified and directed. 50 KILOGRAM
17 17 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed. 8 SQUARE METRE
18 18 Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed. 70 KILOGRAM
19 19 Material and labour for RCC (Nominal Mix) type B0 (1:2:4) (12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and similar works complete all as specified and directed. 5.3 CUBIC METRE
20 20 Material and labour for digital coloured glazed ceramic tiles of sizes 300m x 450 mm X 7 mm thick jointed in neat cement slurry, laid over and including 10 mm thick screed bed/backing layer in CM (1:4) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and directed.\n 179.5 SQUARE METRE
21 21 Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and directed.\n 77 SQUARE METRE
22 22 Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. 123 SQUARE METRE
23 23 Supply and fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes laid in trenches complete all as specified and directed. 12 RUNNING METRE
24 24 Material and labour for 15 mm thick rendering in cement mortar (1:4) inside and outside wall of manhole of brick work/ concrete surface and finishing even and smooth without using extra cement mortar as per manufactures instructions complete all as specified and directed.\nNote: (i) WPC shall be measured and paid for separately as 'Supply only'.\n(ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction. 39 SQUARE METRE
25 25 Supply only integral water proofing compound.\n 1.5 LITRE
26 26 Material and labour for PVC (SWR) multi floor trap with grating including jointing with solvent cement for diameter of 75 mm outlet complete all as specified and directed. \n\n 1 EACH
27 27 Supply and fixing vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar (1:2) (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. 3 EACH
28 28 Material and labour for 20 mm thick granite (of an type and colour) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/jambs/WHB counters and all other similar works in approved design over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed. 8.5 SQUARE METRE
29 29 Material and labour for 18-20 mm thick granite (of an type and colour) machine cut as in urinal partitions and all other similar works including grinding, polishing,cutting grooves in wall for fixing granite with cement mortar (1:2) and all other arrangments complete all as specified and directed. 2.5 SQUARE METRE
30 30 Supply and fixing urinals spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum wt 60 gms) fixed in position complete all as specified and directed. \n 3 EACH
31 31 Supply and fixing 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. \n 5 EACH
32 32 Supply and fixing PVC connection pipe 15 mm size PTMT nuts of length 450 mm complete all as specified and directed. 5 EACH
33 33 Supply and fixing 15 mm bore fancy type bib taps long body cast copper alloy with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.\n 5 EACH
34 34 Supply and fixing fancy type CP Towel Rail 61 cm long complete all as specified and directed.\n 1 EACH
35 35 Supply and fixing CP soap dish complete all as specified and directed.\n 1 EACH
36 36 Supply and fixing in vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and directed. 1 EACH
37 37 Supply and fixing in 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.\n 1 EACH
38 38 Supply and fixing in vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and directed.\n 1 EACH
39 39 Supply and fixing in 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. 2 EACH
40 40 Supply and fixing grating square 150mm size of PTMT(minimum 100 gms) complete all as specified and directed. 1 EACH
41 41 Supply and fixing 5.50 mm thick of size 1000X1200mm bevelled edge mirror of selected quality glass and fixed to walls using hidden studs complete all as specified and directed.\n 1 EACH
42 42 Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and directed. 50 SQUARE METRE
43 43 Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified and directed. 3.35 PER TEN SQUARE METRE
44 44 Material and labour for machine cut, polished kota stone work 20 to 25 mm thick (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms, skirtings and like including laying over 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. 25 SQUARE METRE
45 45 Supply and fixing of double bowl sink made of stainless steel 1 mm thick kitchen with plugs, washers and wastes coupling including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe. The item includes waste coupling, stainer, drain drop connection to the floor trap, waste pipe complete all as specified and directed. 1 EACH
46 46 Supplying and laying of CPVC pipes outer diameter of 16 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. 40 RUNNING METRE
47 47 Rounding to edges of stone/granite slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 15 RUNNING METRE
48 48 Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3mm thick (average) Birla wall care putty complete all as specified and directed. 60 SQUARE METRE
49 49 Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3mm thick (average) Birla wall care putty complete all as specified and directed. 60 SQUARE METRE
50 50 Supply and fixing of stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 900 x 750 x 300 mm including screws complete all as specified and directed. 1 EACH
51 51 Supply and fixing 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed. 8 RUNNING METRE
52 52 Supply and fixing 75mm dia PVC (SWR) bends with any radius complete all as specified and directed. 1 EACH
53 53 Supply and fixing of 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 1 EACH
54 54 Supply and fixing of 75mm dia PVC (SWR) bends with any radius with access doors complete all as specified and directed. 3 EACH
55 55 Taking down chowkhats or frames with shutters (without taking off shutters from frames) not exceeding 1.50 sqm each complete all as specified and directed. 40 EACH
56 56 Supply and fixing powder coated any colour (minimum thickness of powder coating 50 micron) anodised aluminium frame/shutters for doors, windows and ventilators with one or more rebates including joining cleat for fixing, rubber beads, handles 7 hinges etc complete all as specified and directed. 265 KILOGRAM
57 57 Material and labour for 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exceeding 0.5 sqm in each pane frosted on one side complete all as specified and directed. 30 SQUARE METRE
58 58 Supply and fixing aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed. 30 SQUARE METRE
59 59 Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. 121 SQUARE METRE
60 60 Material and labour for broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 12 CUBIC METRE
61 61 Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and directed (thickness of slab 200 mm) 10 PER TEN RUNNING METRE
62 62 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. out side MoD land complete all as specified and directed. 155.5 SQUARE METRE
63 63 Material and labour for providing precast cement concrete louvers and jallies 40 mm thick fixed over boundry walls using two Nos vertical members and one Nos member surmounted over vertical members of jali (like ropes of the same materials) including all moulding and taking down old existing jallies complete all as specified and directed. 83 SQUARE METRE
64 64 Material and labour for preparing Newly plastered surfaces of walls / ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer and use of scaffolding where required at any height of buildings for external painting complete all as specified and directed. 340 SQUARE METRE
65 65 Supply and fixing structural steel work in tubular / square tube trusses including special shaped washer, gusset/ bearing plate etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and directed. 400 KILOGRAM
66 66 Material and labour for preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed. 25 SQUARE METRE
67 67 Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. 10 SQUARE METRE
68 68 Cutting holes in brick walls in cement mortar for inserting angle or other section and making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type as required complete (depth exceeding one brick but not exceeding two bricks) all as specified and directed. 92 EACH
69 69 Supply and fixing 3 mm thick fibre glass reinforced translucent plain sheeting fixed with coach screws and washer in mild steel frame as view cutter of walls complete all as specified and directed. 120 SQUARE METRE
70 70 Supply and fixing galvanised iron pipe medium grade of 15 mm bore including all fittings and cutting/making thread fixed to walls/ceiling/floors by including cutting chases and making good as per existing finish complete all as specified and directed. 24 RUNNING METRE
71 71 Supply and fixing vitreous China squatting pan, Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.\n 1 EACH
72 72 Material and labour for GI frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed. 300 SQUARE METRE
73 73 Material and labour 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to frame work in ceiling and all other similar works complete all as specified and directed. 300 SQUARE METRE
74 74 Taking down carefully copper/aluminum submain wiring complete including all fixtures such as switches, bulk head fittings, building security light fittings, plug socket boxes etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed 390 RUNNING METRE
75 75 Supply and laying sub main wiring (concealed type), with four run of 16 sq mm PVC unseathed FRLSH wire along with one run of 16 sq mm green colour wire as earth contuinity conductor connected to common earth dolly for from Main TPN DB to sub TPN DB, including rigid non-metallic PVC heavy duty conduit (ISI mark), 25/32 mm dia suitable size including cutting chases for conduits for concealed conduit wiring with all fittings and accessories and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putty and apply two coats of paint, match with existing colour in disturbed surface area) complete all as specified and directed. Note : Mode of measurement four runs of 16 sqmm cable and one run of 16 sqmm cable with PVC conduite shall be measured as one length. 120 RUNNING METRE
76 76 All as per srl item No 75 here-in-before but with two run of 10 sq mm PVC unseathed FRLSH wire along with one run of 10 sq mm green colour wire as earth contuinity conductor connected to common earth dolly for from Sub TPN DB to SPN DB complete all as specified and directed. Note : Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduite shall be measured as one length. 270 RUNNING METRE
77 77 Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed. 494 PER POINT
78 78 Material and labour for point wiring concealed type, in and including rigid non-metallic PVC Flame proof heavy duty PVC conduite ISI mark of suitable size, cutting chases for conduits, sinking for boxes for concealed type wiring with 1.5 sqmm FRLSH PVC insulated, unsheathed, multi stranded copper conductor cable single core, 1100 volts grade with flush type metal boxes suitable for fixing switches, sockets and fan regulator etc., white or any colour cover plate with brass screws and cup washers including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete all as specified and directed for one light point controlled by one switch. 170 PER POINT
79 79 All as per item No. 78 above but One bell point controlled by one bell push. 6 PER POINT
80 80 All as per item No. 78 but One ceiling fan controlled by one switch & regulator. 48 PER POINT
81 81 All as per item No. 78 but One Exhaust fan / Wall fan controlled by one switch. 22 PER POINT
82 82 All as per item No. 78 but One 3 pin socket point 5 Amps on independent board. 70 PER POINT
83 83 All as per item No 78 but One 3 pin socket point 5 Amps on same board. 91 PER POINT
84 84 All as per srl item No 78 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified and directed. 65 PER POINT
85 85 All as per srl item No 78 here-in-before but for one socket point 15 Amp with 4 sqmm PVC unseathed FRLSH wire along with 4 sqmm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified and directed.\n 35 PER POINT
86 86 Supply and fixing in repair Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed. 394 EACH
87 87 Supply and fixing Switch piano, in repair, flush type single pole, one way 15 Amp complete all as specified and directed. 63 EACH
88 88 Supply and fixing socket in repair, 2/3 pin 5 Amp complete all as specified and directed. 161 EACH
89 89 Supply and fixing socket in repair, 6/16 A, 2/3 pin complete all as specified and directed. 63 EACH
90 90 Supply and fixing in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amp with all connected accessories complete all as specified and directed. 35 EACH
91 91 Supply and fixing stepped type electronic fan regulator in repair, 450 watt flush type on the existing phenolic laminated sheet etc. complete all as specified and directed. 48 EACH
92 92 Supply and fixing bell push 6 Amp complete all as specified and directed. 6 EACH
93 93 Supply and fixing Bell, AC, 230 Volts, single pole complete all as specified and directed. 6 EACH
94 94 Supply and fixing ceiling rose in repair, surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed. 228 EACH
95 95 Material and labour for flame proof point wiring in repair, on wall and surface wiring on ceiling / roof with necessary fixing arrangements for one light point controlled by one switch with stranded PVC-ZHLS insulated and unsheathed copper stranded conductor of size 1.5 sqmm, 1100 volts grade drawn in and including all connected accessaries like 14 gauge ERW rigid steel conduit (metallic) not less than 20 mm dia with all MS conduit accessories / fittings such as junction boxes, bends, tee, elbow etc including, PVC-ZHLS insulated and unsheathed copper stranded conductor of size 1.5 sqmm, 1100 volts grade for continuous earthing and complete all as specified and directed.\nNote:- The quoted unit rate shall be deemed to be inclusive of Junction box flame proof, bends, tee, elbow, flexible metalic conduite and ERW rigid steel conduit (metallic) included in unit quoted rate. \n 4 PER POINT
96 96 Supply and fixing flame proof rotary switch in LM6, 16 amps, single pole, 250 volts and enclosed cast aluminium body with threaded cover with switch operated by a single pole knob with double entries suitable for 20 mm dia ERW threaded steel conduit duly approved by CMRI dhanbad and as per manufacturers intructions complete all as specified and directed. 2 EACH
97 97 Supply and fixing fluorescent tube light fitting, flameproof type FLP-WP of T5 1x28 w, including integral reflector made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc., and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor with suitable size complete all as specified and directed. 4 EACH
98 98 Supply and fixing LED 36 Watt fitting in repair, minimum 110 Lumin per Watt, 6500 K, recessed mounted, full glow, slim type, of size 60 cm x 60 cm square type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/20mm and necessary fixing arrangements complete all as specified and directed. \nMake - Havells (Cat part No - ENDURASLIMPROPLUS2X2 PLR36WLED840MOD) or equivalent model of Wipro Model No LM25-361-XXX-65-G1** / Philips Model No - RC380BLED 34S-6500 L60W60PSDOD-51 / OSRAM 30 EACH
99 99 Supply and fixing LED 36 Watt in repair, hanging type fitting, rectangular type, 1x4 ft, full glow, slim type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/20mm and necessary fixing, including suspension system and hanging arrangement complete all as specified and directed. Make - Havells (Cat part No - ENDURASLIMPROPLUS4X1 PLR34WLED840MOD or equivalent model of Wipro Cat Part No CRCO13R038HP57G1 / Philips Cat Part No RC869BLED30S-6500PSEW30L120D8GR 20 EACH
100 100 Supply and fixing surface mounted 10 watts LED tube light fitting in repair, mirror light fitting with lamp and connecting up with copper 3 core flexible cord of minimum size 0.5 sqmm complete all as specified and directed. \nMake:- Wipro, Model No : Wipro Garnet 10W LED Batten 6500K or in equivalent model in Havells / Philips / OSRAM. 4 EACH
101 101 Supply and fixing Lamp holder in repair bakellite with back plate with 0.5 / 1 watt LED lamp complete all as specified and directed. \n 6 EACH
102 102 Supply and fixing 20 watt LED in repair, 4 feet long fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi stranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed \nMake:Havells cat pt no LHEXBXPNIN1W020 equivalent model in Philips / OSRAM 53 EACH
103 103 Supply and fixing LED 12 Watt recessed mounted circular downlighter fitting in repair, decorative type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/20mm and necessary fixing arrangement complete all as specified and directed. Make : Havells, Cat Part No : EDGEPRORDDLR12WLED840S or equivalent model of Wipro Model No LD90-141-XXX-65-XX* / Philips Model No -DN393B LED12S-6500 PSUWH 40 EACH
104 104 Supply and fixing LED 8 Watt recess mounted circular moveable type with 1800 degree angle downlighter fitting, in repair (3000 K, Warm White colour ), slim type, decorative type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0.20mm and necessary fixing arrangement complete all as specified and directed. 10 EACH
105 105 Supply and fixing DB vertical type 8 way VTPN in repair, double door load line powder coated complete alongwith 200 Amp rated Bus bar with 125 Amp MCCB with breaking capacity 25 KA, fixed on wall (semi concealed type) duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCCB / MCB's 2 EACH
106 106 Supply and fixing DB vertical type 8 way VTPN in repair, double door load line powder coated complete alongwith 200 Amp rated Bus bar with 200 Amp MCCB with breaking capacity 36 KA, fixed on wall (semi concealed type) duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCCB / MCB's 1 EACH
107 107 Supply and fixing DB vertical type 4 way TPN in repair, double door load line powder coated complete alongwith 200 Amp rated bus bar fixed on wall (semi concealed type) duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB 4 EACH
108 108 Supply and fixing sheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall (semi concealed type) duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. \n 5 EACH
109 109 Supply and fixing sheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall (semi concealed type) duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. \n 10 EACH
110 110 Supply and fixing MCB SP in repair, 240 volt, 6 to 32 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. 232 EACH
111 111 Supply and fixing MCB SPN in repair, 240 volt, 6 to 40 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. 15 EACH
112 112 Supply and fixing MCB TPN in repair, 35 to 60 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., complete all as specified and directed. 4 EACH
113 113 Supply and laying in repair cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core complete all as specified and directed. 70 RUNNING METRE
114 114 Supply and laying in repair cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 core complete all as specified and directed. 75 RUNNING METRE
115 115 Supply , Laying , connecting, charging, testing and commissioning LT XLPE insulated cable electric, armoured, cross-sectional area, pvc sheathed, heavy duty, electric cable 1100 volt grade with stranded aluminum conductor of size 2 core 10 sq mm conforming to IS :1554, laid in trenches/ducts all as specified and directed. 120 RUNNING METRE
116 116 Excavating in trenches not exceeding 1.5m wide and depth exceeding 1.5m but not exceeding 3m in hard/dense soil for laying of cable/ GI pipe / erection of poles and getting out complete all as specified and directed. 0.162 CUBIC METRE
117 117 Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m depth in hard/dense soil for laying of cable/ GI pipe/ erection of poles and getting out complete all as specified and directed. 31.5 CUBIC METRE
118 118 Material and labour for dry clean river sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. \nNote :- Punned thickness of sand will be measured and paid. 8.7 CUBIC METRE
119 119 Supplying and laying un-reinforced precast concrete cable cover, class LV Type I, flat, size 250 mm x 150 mm x 40 mm. laid in trenches complete all as specified and directed. 670 EACH
120 120 Supply and fix looping box made out from fiber of size 300X200X112mm, out door type weather proof with locking arrangement & comprising of connector MCB SPN 10 Amp, with suitable bus bar arrangements and fix on pole with and including suitable size MS clamps, MS flat iron, cable glands, nut bolts, washers etc complete all as specified and directed. \n 2 EACH
121 121 Supply and laying cable insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded aluminium conductor of size 1.5 Sqmm 3 core complete all as specified and directed.\n 32 RUNNING METRE
122 122 Material and labour GI tubing 50 mm dia light grade galvanized with all connecting items (like suitable size of clamps, angle, nut & bolts) for holding of pipe with pole complete all as specified and directed. \n 9 RUNNING METRE
123 123 Supply and fixing Steel tubular swaged poles type 410 SP-31 (9.0 metres long) complete with cast iron base plate, finial taper plug, bolts, nuts, screws and top cover, all as specified and including the following:-\n(a) M&L for painting external surface steel tublar poles 9 Mtr long any type complete and cross arm/bracket etc with two coats of aluminium paint over a one coat of red oxide paint and upto 1.50 mtr from bottom in alternate layer black paints and alluminium paint in alternate strip up to (each strip of 30 cm) with from bottom including preparation of surface and marking pole No complete all as specified and directed.\n(b) Material and labour for writing letter or figures (Block, Roman, italic as Indian) with thick synthetic enamel paint of approved shade not exc height in numbering of pole all as directed.\n(c) Drilling a 02 Nos of hole to LT Pole (one hole near street light bracket and another near bus bar at bottom side) for insert of cable for street light.\n(d) Bracket for flood light made out of GI angle shape including welding etc and clamps, necessary nut bolt washer 2 EACH JOB
124 124 Material and labour for Plain cement concrete PCC (1:3:6) type C-2, using 40mm graded stone aggregate for making foundation of street light poles complete all as specified and directed. 1.62 CUBIC METRE
125 125 Material and labour for Plain cement concrete (PCC) type B1 (1:2:4) using 20mm graded aggregate stone for making coping of Street light poles complete all as specified and directed. 0.18225 CUBIC METRE
126 126 Supply and fix LED flood light fitting of capacity 70 watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and UV and including suitable bracket and fixed to pole/ wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc., complete all s specified and directed Make Philips : cat pat No BVP120 LED70CW NB FG S1 PSU GR or equivalent in Wipro cat part No LF19-711-060-57-XX / Havells cat part No JETANCOFL70W LED757 LTG . 4 EACH
127 127 Material and labour for cutting existing hard standing by manual method, 0.45 m width and 0.6 m in depth for inserting galvanized tubing for cable protection, refilling the same after laying of pipe, with soil, stone aggregate etc., as obtained from excavation, making good top surface with 100mm thick PCC (1:3:6), type CI using 20mm graded stone aggregate and removal of excess material if any, complete all as specified and directed. \nNote:- Cost of taking out of old GI pipe is deemed included in the quoted rate. 5 RUNNING METRE
128 128 Supply and fixing LED building security light, in repair, 45 Watt, 100 lumens per watt, IP 65/66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, dedicated optics with precise light distribution SDMC not less than 5 uniform lighting quality and UV stabilized, output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours and including suitable bracket made out of GI pipe 25mm/40 mm bore light grade (as per fitting bas dia) of approximate length 2mtr long bent to shape and fixed to wall with two Nos. MS clamps made out of 32 x 6mm thick flat with nuts, bolts and washers etc., including connecting up with 2 core 1.5 sqmm PVC insulated PVC sheathed weather proof multi stranded aluminium conductor cable 1100 volts grade upto junction box including painting of clamps with two coats of aluminium paint over a coat of approved primer complete all as specified and directed. Make Philips : cat pat No BRP409 LED060HENRPC S1PSU GR or equivalent in Wipro cat part No LR02-501-XXX-57-XX / Havells cat part No ENDURACITYLINERNEXGENSL 45WLED757 SASYBOPC. \n 1 EACH
129 129 Supply and fixing Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed. 2 EACH
130 130 Supply and fixing Switch paino, flush type single pole, one way 15 Amp complete all as specified and directed. 2 EACH
131 131 Supply and fixing socket 6/16 Amp 2/3 pin 5 Amp complete all as specified and directed. 5 EACH
132 132 Supply and fixing ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed. 1 EACH
133 133 Supply and fix 20 watt LED, 6500 K, 4 feet long fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed \nMake:Havells cat pt no LHEXBXPNIN1W020 equivalent model in Wipro model no - Wipro Garnet 20 W LED Batten 6500K / Philips model No - BN150W LED 20S-6500 PSE ODGR / OSRAM. 0.5 EACH
134 134 Supply and fix surface mounted 10 watts, 6500K, LED tube light fitting, mirror light fitting with lamp fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed \nMake:- Wipro, Model No : Wipro Garnet 10W LED Batten 6500K or in equivalent model in Havells cat pat No LUMILINEB59W LED830SPCWH / Philips model no BN021LED10S-2ft. / OSRAM 25 EACH
135 135 Supply and fixing in repair LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minium 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers etc. complete all as directed by Engineer-in-Charge. Make Philips : cat pat No BRP409 LED060HENRPC S1PSU GR or equivalent in Wipro cat part No LR02-501-XXX-57-XX / Havells cat part No ENDURACITYLINERNEXGENSL 45WLED757 SASYBOPC. 170 EACH
136 136 Supply and fixing MCB SP, 240 volt, 6 to 32 Amps complete all as specified and directed. 185 EACH
137 137 Supply and fixing MCB SPN, 240 volt, 40 Amps complete all as specified and directed. 66 EACH
138 138 Supply and fixing sheet metal enclosures for DBs, double door when MCBs to be used 240 volts 4 way, with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. \n 28 EACH
139 139 Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to 4 mm dia GI wire as earthling lead by means blots and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber, MS funnel, wire gauge. CI cover with frame, 15 MM dia GI pipe light grade for protection of wire etc including necessary excavation in any type of strata, returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 5 of MES Sch Part I, connected to Earthing test point complete all as specified and directed on testing on completion. 33 EACH JOB
140 140 Supply and fixing Exhaust Fans, AC single phase 230/ 240 V, iron body, speed of motor 900 RPM, of size 300 mm sweep with louver, including making electrical connections with stranded copper conductor cable of size minimum 0.5 sqmm from ceiling rose to fan connector, necessary clamps, nuts bolts and washers complete all as specified and directed. 28 EACH
141 141 Supply and fixing rotational moulded tripple layer ISI Marked polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 ltrs hoisted and fixed in position including all as specified in SSR Part I and as directed. 1 EACH
142 142 Material and labour for tank Nipple suitable for HDPE water tank of size 20 mm bore including drilling hole to the existing water storage tank and connecting complete all as specified and directed. 1 EACH
143 143 Supply and fixing ball valves of size 20 mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. 1 EACH
144 144 Supply and fixing gun metal, globe or gate valves of size 25 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 1 EACH
145 145 Supply and fixing gun metal, globe or gate valves of size 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 1 EACH
146 146 Supply and fixing galvanised iron pipe medium grade of 20 mm bore including all fittings and cutting/making thread to the existing GI pipe for insertion of new tees/sockets etc fixed to walls/ceiling/floors complete all as specified and directed. 3 RUNNING METRE
147 147 Supply and fixing galvanised iron pipe medium grade of 25 mm bore including all fittings and cutting/making thread to the existing GI pipe for insertion of new tees/sockets etc complete fixed to walls/ceiling/floors all as specified and directed. 50 RUNNING METRE
148 148 Supply and fixing Gun metal push cock, chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 3 EACH
149 149 Supply and fixing in repair PVC connection pipe with stainless steel nuts heavy duty ISI marked of length 300mm complete all as specified and directed. 3 EACH
150 150 Supply and fixing Stop valves of size 15 mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 1 EACH
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail