Military Engineer Services-MES has published Addition / Alteration And Special Repair To Md Accn At Tenga ( Ph-I ) Under Ge 859 Ews. Submission Date for this Tender is 21-05-2021. Civil Work Tenders in TENGA Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Apr-2021 | Revised BOQ - 1 | BOQ | 10-05-2021 |
| 2 | 30-Apr-2021 | Amendment - 2 | Other | 14-05-2021 |
| 3 | 14-May-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-05-2021 |
| Name of Work: ADDITION / ALTERATION AND SPECIAL REPAIR TO MD ACCN AT TENGA (PH-I) UNDER GE 859 EWS | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | B/R WORKS | |||
| 2 | 1.01 | Demolition of cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar work including rubbish off the premises complete all as specified and as directed. | 273.6 | CUM | |
| 3 | 1.02 | M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in roof padding, finished the surface fair and even complete all as specified and as directed. | 75.85 | CUM | |
| 4 | 1.03 | M&L for 20 mm thick screed bed in CM (1:6) on roof surfaces, finished the surface even and smooth without using extra cement using WPC as per manufacturer's instruction (WPC shall be measured and paid separately under respective item here-in-after) complete all as specified and as directed. | 3034 | SQM | |
| 5 | 1.04 | M&L for preparation of new plastered surfaces of roof and waterproofing treatment over smooth finished roof surfaces after application of cold bituminous primer @ 0.30 kg/Sqm and applying hot bitumen 85/25 @ 1.20 Kg/Sqm providing and laying APP polymer modified non-woven polyester mat reinforced membrane 3.00mm thick , weighing not less than 3.5 Kg /Sqm with surface finish by torch application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solar reflective aluminium paint @ 100 gms/ Sqm complete all as specified and as directed. | 3034 | SQM | |
| 6 | 1.05 | M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in floor, sub base of floor complete all as specified and as directed. | 1500 | SQM | |
| 7 | 1.06 | M&L for 20 mm thick screed bed in CM (1:6) for laying floor tiles complete all as specified and as directed. | 5072 | SQM | |
| 8 | 1.07 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match with the shade complete all as specified and as directed. | 605.3 | SQM | |
| 9 | 1.08 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0 .38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and as directed. | 3780 | SQM | |
| 10 | 1.09 | M&L for 75mm thick PCC (1:3:6) type C1 using 20 mm graded stone aggregate as in plinth protection finish the surface even and smooth using with extra cement complete all as specified and as directed. | 584 | SQM | |
| 11 | 1.1 | M&L for machine cut kota stone slab flooring 18-20 mm thick over 20 mm cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. | 292 | SQM | |
| 12 | 1.11 | M&Lfor machine cut kota stone slabs flooring 18-20 mm thick as in riser of steps & trades, skirting, dado and the like, set & jointed in neat cement slurry over 20 mm thick cement mortar (1:6) including rubbing and polishing, rounding or bullnosing the exposed edges complete all as specified and as directed. | 35 | SQM | |
| 13 | 1.12 | M&L for chequered cement concrete tiles 20cmx20cmx25cm thick with mixture of grey cement and pigment, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed. | 374 | SQM | |
| 14 | 1.13 | M & L for 75 mm thick plain cement concrete (1:4:8), type D2, using 40mm graded aggregate as in sub base including form work complete all as specified and as directed. | 374 | SQM | |
| 15 | 1.14 | M&L for plain cement concrete (1:2:4), type B1 using 20 mm graded aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. | 5 | CUM | |
| 16 | 1.15 | M&L for 25mm thick plain cement concrete (1:2:4), type B-1 using 20mm graded aggregate, finish cement concrete surface even and smooth using extra cement complete all as specified and as directed. | 374 | SQM | |
| 17 | 1.16 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including rubbish off the premises complete all as specified and as directed. | 10 | CUM | |
| 18 | 1.17 | M&L plain cement concrete (1:3:6), type C1, using 20mm graded stone aggregate as in surface channels and drains complete all as specified and as directed. | 10 | CUM | |
| 19 | 1.18 | M&L for 15mm thick rendering in cement mortar (1:3) on brick or concrete surfaces of wall finshed even and smooth using extra cement complete all as specified and as directed. | 290 | SQM | |
| 20 | 1.19 | M&L for plain cement concrete (1:4:8), type D2 using 40 mm graded stone aggregate as in sunken floor,foundation filling and mass concrete complete all as specified and directed. | 24 | CUM | |
| 21 | 1.2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including rubbish off the premises complete all as specified and directed. | 26 | CUM | |
| 22 | 1.21 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed. | 2050 | KG | |
| 23 | 1.22 | M&L for mild steel TMT bars 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. | 1020 | KG | |
| 24 | 1.23 | M&L for form work to chullah hoods,chajjas,troughs and similar items including edges with fair finish flat surfaces complete all as specified and directed. | 250 | SQM | |
| 25 | 1.24 | M&L for reinforced cement concrete M-20 (1:1.5:3) (nominal mix) using 20 mm graded stone aggregate for slabs supported on walls , beams and columns, in floors,hold fast, roofs, landings and in shelves ,chhajja's and the like complete with all necessary formwork complete all as specified and directed. | 52 | CUM | |
| 26 | 1.25 | M&L for 18 to 20 mm thick granite work (table rubbed and polished) in steps and cooking platform and like in cm (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade complete all as specified and directed. | 256 | SQM | |
| 27 | 1.26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including rubbish off the premises complete all as specified and directed. | 2100 | SQM | |
| 28 | 1.27 | M&L for 10mm thick rendering in CM (1:4) for laying wall tiles complete all as specified and directed. | 2100 | SQM | |
| 29 | 1.28 | M & L for 450 x 350 x 6 to7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match with the shade complete all as specified and directed. | 2100 | SQM | |
| 30 | 1.29 | Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar including rubbish off the premises complete all as specified and directed. | 170 | CUM | |
| 31 | 1.3 | M&Lfor PCC (1:3:6) type C-1 ( using 20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc. 10 cm in width and setting in CM (1:6) etc complete all as specified and directed. | 53 | CUM | |
| 32 | 1.31 | M&L for precast cement concrete (1:3:6) type C1 (using 20 mm graded aggregate) solid building blocks or slabs n.exc 10cm thick (with plain or interlocking joints as directed ) complete set in CM (1:4) complete all as specified and directed. | 1190 | SQM | |
| 33 | 1.32 | M & L for 15 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. | 2500 | SQM | |
| 34 | 1.33 | Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. including rubbish off the premises complete all as specified and directed. | 12500 | SQM | |
| 35 | 1.34 | M & L for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. | 5800 | SQM | |
| 36 | 1.35 | M&L for 5 mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling finshed even and smooth without using extra cement complete all as specified and directed. | 2600 | SQM | |
| 37 | 1.36 | M & L for 5 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces using WPC as per manufacturer's instruction over 10 mm thick backing coat in CM (1:4) and finishing the surfaces even & smooth without using extra cement.(WPC shall be measured and paid separately under respective item) complete all as specified and directed. | 3600 | SQM | |
| 38 | 1.37 | Supply only integral water proofing compound (ISI Marked) complete all as specified and directed. | 210 | KG | |
| 39 | 1.38 | Taking down cast iron soil, rain water pipes and vent pipes of any dia any pattern including all fittings and removing from site complete all as specified and directed. | 1167 | RM | |
| 40 | 1.39 | S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed. | 607 | RM | |
| 41 | 1.4 | S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed. | 560 | RM | |
| 42 | 1.41 | S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm bore complete all as specified and directed. | 84 | EACH | |
| 43 | 1.42 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed. | 233 | EACH | |
| 44 | 1.43 | S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed. | 336 | EACH | |
| 45 | 1.44 | S&F PVC (SWR) junction single, (single T) equal or unequal with access door 75mm bore complete all as specified and directed. | 168 | EACH | |
| 46 | 1.45 | S & F 125/110 mm PVC (SWR) 'p' trap complete all as specified and directed. | 84 | EACH | |
| 47 | 1.46 | S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. | 84 | EACH | |
| 48 | 1.47 | S&F PVC (SWR) couplers 110mm bore complete all as specified and directed. | 84 | EACH | |
| 49 | 1.48 | S&F PVC (SWR) WC connector 110mm bore lip ring complete all as specified and directed. | 84 | EACH | |
| 50 | 1.49 | S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. | 168 | EACH | |
| 51 | 1.5 | Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store complete all as specified and directed. | 62 | EACH | |
| 52 | 1.51 | S & F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. | 62 | EACH | |
| 53 | 1.52 | Disconnecting existing tanks, setting aside or lowering if required for repairs, cleaning, etc and hoisting with required reconnection and re-fixing in position complete all as specified and directed. | 22 | EACH | |
| 54 | 1.53 | S & F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia complete all as specified and directed. | 84 | EACH | |
| 55 | 1.54 | Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. | 583 | RM | |
| 56 | 1.55 | S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed. | 433 | RM | |
| 57 | 1.56 | Refixing of 15 mm bore old steel water tubing and conncetions in new or old position to walls and ceiling with new fittings complete all as specified and directed. | 150 | RM | |
| 58 | 1.57 | Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. | 1143 | RM | |
| 59 | 1.58 | S&F 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed. | 303 | RM | |
| 60 | 1.59 | Refixing of 20 mm bore old steel water tubing and conncetions in new or old position to walls and ceiling with new fittings complete all as specified and directed. | 840 | RM | |
| 61 | 1.6 | S & F in repair looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | 84 | EACH | |
| 62 | 1.61 | S&F vitreous china wash hand basin, white, pedstal petern of size 550 mm x 400 mm including cutting for and pinning in ends of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed and flush pipe of polythylene of low or high density or PVC pipe complete all as specified and as directed. | 84 | EACH | |
| 63 | 1.62 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. | 336 | EACH | |
| 64 | 1.63 | S&F brass chromium plated sink mixer table mounted with 450mm long braided hoses screwed down for 15mm bore iron pipe complete all as specified and directed. | 84 | EACH | |
| 65 | 1.64 | S&F in repair vitreous China squatting pan, "Orissa" pattern size 580 X 440 mm, white, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc complete all as specified and directed. | 84 | EACH | |
| 66 | 1.65 | S & F in repairs 8 ltrs capacity PVC valveless syphonic action type dual mode flushing cistern low level white with inlet ball valve, float and all accessories complete all as specified and directed. | 84 | EACH | |
| 67 | 1.66 | S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed. | 168 | EACH | |
| 68 | 1.67 | S&F in repair 15 mm dia stop valve external threaded,cast coppper alloy ,screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe or for uninos complete all as specified and directed. | 336 | EACH | |
| 69 | 1.68 | S&F wall mixer brass chromium plated for mixing hot & cold water screwed down for PPRC pipe/steel pipe or union of 15 mm dia complete all as specified and directed. | 84 | EACH | |
| 70 | 1.69 | S&F central hole basin mixer brass CP for hot and cold water screwed down for iron pip complete all as specified and directed. | 84 | EACH | |
| 71 | 1.7 | S & F in repairs 15 mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. | 168 | EACH | |
| 72 | 1.71 | S&F mild steel hat pegs, set of 5 no's, solid body, 40 to 75 mm long in size with stainless steel plate fixed to wall with the help of 35mm long screws complete all as specified and directed. | 84 | EACH | |
| 73 | 1.72 | S & F in repair brass chromium plated shower rose 125 mm dia with swivel joints including fixing to steel pipe or union complete all as specified and directed. | 84 | EACH | |
| 74 | 1.73 | S&F in repair plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed. | 84 | EACH | |
| 75 | 1.74 | S&F sinks made of stainless steel 1.00 mm thick kitchen with plugs, washers & wastes; including bedding in cement mortor on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. | 84 | EACH | |
| 76 | 1.75 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm and removing from site complete all as specified and directed. | 840 | EACH | |
| 77 | 1.76 | All as per item No. 1.75 here-in-before but area not exc 1.50 Sqm complete all as specified and directed. | 168 | EACH | |
| 78 | 1.77 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening complete all as specified and directed. | 756 | RM | |
| 79 | 1.78 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat mouleded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rain, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supling & fixing in the frame at site complete all as specified and directed. | 223 | SQM | |
| 80 | 1.79 | S & F 2nd calss hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. | 55 | CUM | |
| 81 | 1.8 | M&L for mild steel window guard bars, window frames etc articles conforming to Fe-290 Gde E-165 complete all as specified and directed. | 2000 | KG | |
| 82 | 1.81 | S & F 25 mm thick flush sutter ,solid core construction, with block board core and plywood face panels,commercial type on both sides complete all as specified and directed. | 430 | SQM | |
| 83 | 1.82 | M & L for 12 mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces complete all as specified and directed. | 110 | SQM | |
| 84 | 1.83 | S&F 12 mm thick prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamanation, fixed with screw to timber frame work complete all as specified and directed. | 110 | SQM | |
| 85 | 1.84 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint (1st quality) over a coat of pink primer complete all as specified and directed. | 2000 | SQM | |
| 86 | 1.85 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. | 336 | EACH | |
| 87 | 1.86 | S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. | 430 | SQM | |
| 88 | 1.87 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc. but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc complete all as specified and directed. | 1150 | SQM | |
| 89 | 1.88 | S&F 100mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 complete all as specified and directed. | 504 | EACH | |
| 90 | 1.89 | S & F 100 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed. | 1500 | EACH | |
| 91 | 1.9 | S & F 75 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed. | 2900 | EACH | |
| 92 | 1.91 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. | 1000 | EACH | |
| 93 | 1.92 | S&F 75 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. | 1500 | EACH | |
| 94 | 1.93 | S&F 150 mm long aluminium handles cast type anodised complete all as specified and directed. | 1290 | EACH | |
| 95 | 1.94 | S&F 75 mm long aluminium handles cast type anodised complete all as specified and directed. | 2265 | EACH | |
| 96 | 1.95 | S & F in repair aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. | 250 | EACH | |
| 97 | 1.96 | S&F pre coated mild steel floor door stopper ,tongue anodized 140 mm length including vulcanised rubber piece complete all as specified and directed. | 500 | EACH | |
| 98 | 1.97 | S&F in repair hasp and staple 125 mm safety type, aluminium anodised fixed with screws complete all as specified and directed. | 290 | EACH | |
| 99 | 1.98 | S&F PVC coated 25 mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm complete all as specified and directed. | 700 | RM | |
| 100 | 1.99 | S & F sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads in squares n exc 0.50 Sqm in each pane complete all as specified and directed. | 233 | SQM | |
| 101 | 2 | S & F 3mm thick figured glass, pin head glazing with oil putty /wooden beads in squares n exc 0.50 Sqm in each pane complete all as specified and directed. | 35 | SQM | |
| 102 | 2.01 | S & F GI steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm etc complete all as specified and directed. | 466 | SQM | |
| 103 | 2.02 | M & L for preparation of old surface of wood and wood based materials over 10 Cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 50 | SQM | |
| 104 | 2.03 | M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed. | 350 | SQM | |
| 105 | 2.04 | M & L for applying one coat of synthetic enamel paint to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of old steel surfaces complete all as specified and directed. | 350 | SQM | |
| 106 | 2.05 | M & L for two coats of cement base paint (colour as approved by GE) on new wall surfaces including all necessary preperation by wetting and curing, complete all as specified and directed. | 4200 | SQM | |
| 107 | 2.06 | M&L for complete removal of existing treatment of wall and applying two coats of acrylic distemper/oil bound distemper on new plastered wall surfaces of any description over a coat of smooth surface wall care putty complete all as specified and directed. | 717 | SQM | |
| 108 | 2.07 | M&L for two coats of white wash on new surfaces of ceiling including all necessary preparation complete all as specified and directed. | 3500 | SQM | |
| 109 | 2.08 | M&L for two coats of acrylic distemper/oil bound distemper on old wall surfaces over a coat of smooth surface of wall care putty with wall primer complete all as specified and directed. | 4490 | SQM | |
| 110 | 2.09 | M&L for preparing old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed. | 2100 | SQM | |
| 111 | 2.1 | M&L for preparing old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. | 2200 | SQM | |
| 112 | 2.11 | M&L for complete removal of existing treatment and appling two coats of cement base paint (colour as approved by GE) on wall surfaces complete all as specified and directed. | 350 | SQM | |
| 113 | 2.12 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation/sewage line and getting out in hard/dense soil complete all as specified and directed.. | 25 | CUM | |
| 114 | 2.13 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick, in hard/dense soil complete all as specified and directed. | 15 | CUM | |
| 115 | 2.14 | M&L for providing PCC (1:3:6) type C-2 using 40mm graded aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified and directed. | 130 | RM | |
| 116 | 2.15 | S&F Salt Glazed Stone Ware drain pipe 150 mm dia, Grade A, laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed. | 130 | RM | |
| 117 | 2.16 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round and 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150mm internal dia of pipes complete all as specified and directed. | 10 | EACH PIPE | |
| 118 | 2.17 | Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. | 10 | CUM | |
| 119 | 2.18 | Form work to edges of concrete flat, tread, similar work exc 5 cm but n exc 10 cm wide for rough finish surfaces of concrete complete all as specified and directed. | 10 | RM | |
| 120 | 2.19 | S&F CP towel ring , fixed with chromium plated brass screws complete all as specified and directed. | 84 | EACH | |
| 121 | 2.2 | S&F CP soap dish, fiexd to plugs with chromium plated brass screws complete all as specified and directed. | 84 | EACH | |
| 122 | 2.21 | S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170Gms) complete all as specified and directed. | 84 | EACH | |
| 123 | 2.22 | S&F toilet mirror cabinet of size 432 x 311 mm, fitted with 4 mm thick superior quality distortion free mirror, fixed to wooden plugs with chorimium plated brass screws complete all as specified and directed. | 84 | EACH | |
| 124 | 2.23 | S&F in repair 2-3 mm thick looking mirror 300 mm x 900 mm bevelled edge mirror of selected quality glass, fixed on existing prelamanted particle board and fixed to wooden plugs with chromium plated brass screws and cup washers teak wood beading etc complete all as specified and directed. | 84 | EACH | |
| 125 | 2.24 | S&F toilet paper holder brass chromium plated fitted to wall with CP/ brass screws, complete all as specified and directed. | 84 | EACH | |
| 126 | 2.25 | S & F sheet glass corner shelf assembly 10 inches, consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. | 84 | EACH | |
| 127 | 2.26 | S&F kitchen cabinet with modular sliding racks/drawers including necessary fittings, to be fixed complete all as specified and as directed. | 206 | EACH | |
| 128 | 2.27 | Dismantling plain or corrugated steel sheeting, of any gauge, thickness as in roof covering including removing from site complete all as specified and as directed. | 455 | SQM | |
| 129 | 2.28 | S & F of prepainted galvalume aluminium zinc coating GI based corrugated colour steel sheet 0.50 mm thick and having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. | 455 | SQM | |
| 130 | 3 | E/M WORKS | |||
| 131 | 3.01 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. | 1965 | POINT | |
| 132 | 3.02 | M&L for point wiring complete with PVC insulated and unsheathed multistranded FRLS copper conductor,1100 volt grade, single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and including non-metallic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc. including providing sunk cast pressed steel terminal boxes of size 200mm X 300mm made out of 1.63mm thick GI steel sheet duly painted with aluminium inside and anticorrosive paint outside concealed in wall and providing 3 mm thick plastic/ bakelite laminated sheet top cover alongwith copper earth wire PVC insulated & unsheathed multistranded FRLS copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and earth dolly and making good the disturbed surfaces and matching with existing wall complete all as specified and as directed for the following:- \n\n Item continued as 3.03 to 3.08 | |||
| 133 | 3.03 | One light point controlled by one way switch 5/6 Amp complete all as specified and as directed . | 886 | POINT | |
| 134 | 3.04 | One light point controlled by two two-way switch 5/6 Amp complete all as specified and as directed . | 63 | POINT | |
| 135 | 3.05 | One ceiling fan/exhaust fan point controlled by one way switch 5/6 Amp complete all as specified and as directed . | 420 | POINT | |
| 136 | 3.06 | One bell/buzzer point controlled by one bell push complete all as specified and as directed . | 84 | POINT | |
| 137 | 3.07 | One 3 pin socket outlet 5/6 Amps point on the same board complete all as specified and as directed. | 256 | POINT | |
| 138 | 3.08 | One 3 pin 5/6 Amp socket out let point on independent board complete all as specified and as directed . | 256 | POINT | |
| 139 | 3.09 | M&L for point wiring complete for one socket outlet 15 Amp point on independent board with PVC insulated and unsheathed multistranded FRLS copper conductor,1100 volt grade, single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and including non-metallic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc. including providing sunk cast pressed steel terminal boxes of size 200mm X 300mm made out of 1.63mm thick GI steel sheet duly painted with aluminium inside and anticorrosive paint outside concealed in wall and providing 3 mm thick plastic/ bakelite laminated sheet top cover alongwith copper earth wire PVC insulated & unsheathed multistranded FRLS copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and earth dolly and making good the disturbed surfaces and matching with existing wall complete all as specified and as directed. | 168 | POINT | |
| 140 | 3.1 | M&L for point wiring complete for one power point for one metal plug & socket for geyser point on independent board with PVC insulated and unsheathed multistranded FRLS copper conductor,1100 volt grade, single core 4 Sqmm (nominal area) cable using approved colour code as per IS drawing in and including non-metallic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc. including providing sunk cast pressed steel terminal boxes of size 200mm X 300mm made out of 1.63mm thick GI steel sheet duly painted with aluminium inside and anticorrosive paint outside concealed in wall and providing 3 mm thick plastic/ bakelite laminated sheet top cover alongwith copper earth wire PVC insulated & unsheathed multistranded FRLS copper conductor cable of size 4 Sqmm as continous earth wire connected to common earth and earth dolly and making good the disturbed surfaces and matching with existing wall, connection of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed. | 84 | POINT | |
| 141 | 3.11 | S&F switch piano flush type (ISI marked), single pole, one way 5/6 Amp, complete all as specified & directed. | 1818 | EACH | |
| 142 | 3.12 | S&F switch piano flush type (ISI marked), single pole, one way 15/16 Amps complete all as specified & directed. | 168 | EACH | |
| 143 | 3.13 | S&F switch piano two way, 5/6 Amp, flush type (ISI marked), single pole, complete all as specified & directed. | 126 | EACH | |
| 144 | 3.14 | S&F socket outlet 2 in 1, 5 pin, 5/6 Amp flush type, 240Volt complete all as specified & directed. | 512 | EACH | |
| 145 | 3.15 | S&F socket outlet, 2 in 1, 5 pin 5/15 Amp, multipurpose, 240 Volt, flush type complete all as specified & directed. | 168 | EACH | |
| 146 | 3.16 | S&F for lamp holder insulated PVC/Polycarbonate body with back plate suitable for batten fittings complete all as specified & as directed. | 332 | EACH | |
| 147 | 3.17 | S&F ceiling rose, PVC/Polycarbonate isolated body three terminals complete all as specified & directed. | 1037 | EACH | |
| 148 | 3.18 | S&F bell/buzzer push 5/6 Amp,flush type complete all as specified & as directed. | 84 | EACH | |
| 149 | 3.19 | S&F call bell ding dong electric AC, 240 volt, 50 HZ, surface type complete all as specified & as directed. | 84 | EACH | |
| 150 | 3.2 | S&F delux fan electronic regulator, AC,50Hz, 100Watt, rotary step type complete all as specified and as directed. | 252 | EACH | |
| 151 | 3.21 | Taking down unserviceable DB/Main switchs/electric meter of any type and capacity including taking out MCB's (SP/SPN) complete all as specified and as directed. | 105 | EACH | |
| 152 | 3.22 | Taking down exhaust fan 250-300 mm sweep,sealing cable end and removing fan to store to keep it in safe custody and refixing only the exhaust fan and connecting up after plaster work complete all as specified and as directed. | 84 | EACH | |
| 153 | 3.23 | Taking down ceiling fan 1200 mm sweep,sealing cable end, dismantling blades and removing fan & blades to store to keep it in safe custody and refixing/hanging only the ceiling fan and connecting up including provision of cable from ceiling rose/connector to fan after plaster work complete all as specified and as directed. | 252 | EACH | |
| 154 | 3.24 | S&F MCB, single pole braking capacity 10 KA, 6 to 32 Amp, 240 volts, , 'C' curve complete all as specified & as directed. \n | 420 | EACH | |
| 155 | 3.25 | S&F MCB, SPN, braking capacity 10 KA ,'C' curve, 40 Amps, 240 Volt complete all as specified and directed. | 168 | EACH | |
| 156 | 3.26 | S&F LED lamp 10 watt, lumen output 95-lm, colour temperature 6500K, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) complete all as specified and directed. | 332 | EACH | |
| 157 | 3.27 | S&F metal plug and socket assembly, SPN sheet metal enclouser with a two pin and earth plug and socket complete with one SP, MCB 20Amp "C" curve fixed flush to wall/other surface complete all as specified and directed. | 84 | EACH | |
| 158 | 3.28 | Taking down carefully unserviceable aluminium submain wiring of any type upto 6 Sqmm 2 run size including conduit /casing and earth wire and making good disturbed surface of wall/ceiling with existing colour and removing complete all as specified and directed. | 744 | RM | |
| 159 | 3.29 | M & L for concealed sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC rigid conduit (medium grade) of size not less than 25mm with all fittings and accessories (ISI Marked) alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead including cutting chases for conduit & making good to wall ,floors etc.complete complete all as specified and as directed.\nNOTE: (a)Two run of 6 Sqmm cable for main and one run of 6 Sqmm cable as earth wire and one run of PVC conduit shall be measured as one unit length. Connections of cables with MCB's or bus bar shall be done through appropriate size brass/copper thimbles. | 744 | RM | |
| 160 | 3.3 | S&F water heater (Geyser) storage type 25 Ltr capacity, BEE 5 Star rated, 2KW, 230Volts, 50Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provision of pressure relief valve including PVC connections 15mm dia for hot and cold water and 3 core PVC insulated sheathed stranded copper cable with plug top 15 Amp AC, 230 V fixing on existing wall complete all as specified and as directed. Note:- Geyser will be fitted with fastners-04 Nos including bolts, washers etc and making good the disturbed surfaces. | 84 | EACH | |
| 161 | 3.31 | S&F exhaust fan of sweep 250 mm with louvers plastic rust proof body and blade, 1280 RPM, AC, single phase, 240Volts, 50 Hz, power input 45 watt, air delivery 860 CMH and connecting up complete including 3 core flexible multistranded copper conductor of size 0.75 Sqmm from ceiling rose to fan including cutting holes and making good the disturbed surfaces of wall in CM(1:4) and finishing the surface as per existing colour complete all as specified and as directed. | 84 | EACH | |
| 162 | 3.32 | Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete (1:2:4) type B-1, precast RCC cover slab (M-15) reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia ropund bar, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore fixed with cast iron funnel and wire mesh and medium grade GI wire protection pipe 15mm bore up to main board & common salt, charcoal in alternate layer complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point. Note - The units rate includes the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20mm GI pipe (Medium grade) for watering 15mm GI protection pipe (Medium grade), funnel, wire mesh, PCC chamber in PCC (1:3:6) type C-1, cast iron frame and 40mm thick RCC cover for pit etc including dismantling the existing unserviceable earthing complete all as specified and as directed. | 21 | EACH SET | |
| 163 | 3.33 | S&F, IP 20, Class I, LED light 1X18 W (or nearest next higher wattage) (4 feet), 5700K, wall / surface mounted, Integrated type with aluminium housing and decorative end caps with integrated high efficiency electronic drive and surge suppressor of 2KV or more, launinaire efficiencty >95 lumens / watt, power factor > 0.90, operating range - 140 to 270V, 50 Hz fixed with 02 Nos of PVC round / sqaure blocks, screws etc complete with all accessories internally prewired and connecting up complete all as specified and as directed. | 336 | EACH | |
| 164 | 3.34 | S&F bulk head luminaire suitable for 10 Watt LED (or nearest next higher wattage) light IP66 grade, luminiare efficiency not less than 120 lumens/ watts with and including 10 watt LED (or neares next higher wattage) lamp and connection up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting complete all as specified and as directed. | 21 | EACH | |
| 165 | 3.35 | S&F IP 20, Class I, LED mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700K, wall / surface mounted with aluninium housing 2 feet long, integrated type with high efficiency PMMA diffuser, integrated high efficiency electronic driver and surge surpressor of 2KV or more, luninaire efficiency > 95 lumens / Watt, factor > / 0.90, operating range - 140 to 270V, 50Hz fixed with 02 Nos of PVC round / square blocks, screws etc complete including 01 No 10W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible cooper conductor cable of suitable size complete all as specified and as directed. | 4 | EACH | |
| 166 | 3.36 | S&F decorative wall light fixture made up of polycarbonate suitable for 10 Watt (for nearest next higher wattage) LED light having B-22 base lamp holder with and including 10 watt LED lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terninal block of light fitting complete all as specified and as directed. | 88 | EACH | |
| 167 | 3.37 | S&F LED ceiling light surface mounted 10 Watt with white powder coated polycarbonate decorative housing and pressure die-cast heat sink having high efficiency including elctronic driver complete prewired complete all as specified and as directed. | 168 | EACH | |
| 168 | 3.38 | S&F distribution board vertical type TPN 415 Volt including one MCCB 4, Poles, 63 Amp, 16KA as incomer, double door IP 43 protection, 4 way with copper bus bars, neutral links , earth link, earthing studs, blanking plates, interconnection between incomer MCCB and bus bar duly prewired fixed flush to wall / other surface complete all as specified and as directed. \nNote: Outgoing MCBs measured and paid separately under relevant item | 21 | EACH | |
| 169 | 3.39 | S&F MCB distribution board (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 100 Amps rated copper bus bar (as per OEM), neutral link earthing studs, suitable for fixing MCBs fixded flush to wall / other surface complete including blank plate complete all as specified and as directed. | 84 | EACH |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
