Supply Of Tools Equipments And Machinery, KAIRANA-Uttar Pradesh

Supply Of Tools Equipments And Machinery - 2 Onnecting Screwdriver 100Mm 3 Neon Tester 500 V 4 Screw Driver Set Set Of 5 5 Insulated Combination Pliers 150 Mm 6 Insulated Side Cutting Pliers 150 Mm 7 Long Nose Pliers 150 Mm 8 Soldering Iron 25 W. 240 V N 9 Electrician Knife 10 Tweezers 100Mm N 11 Digital Multimeter 12 Soldering Iron Changeable Bits 15 W 13 De- Soldering Pump 14 Server Computer Cpu: 32 / 64 Bit I3 / I5 / I7 Or Latest Processor, Speed: 3 Ghz Or Higher Nserver Computer 15 Laptop, Notebook 16 Intel Mobile Desktop Based Pc With Lcd Nmonitor Cpu: 32 / 64 Bit I3 / I5 / I7 Or Latest Processor, Speed: 3 Ghz Or Higher. Ram:-4 Gb Ddr-Iii Or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( Min. 17 Ninch. Licensed Operating System And Antivirus Compatible With Trade Related Software. 17 Tablet 18 Power Meter 19 Anti Static Wrist Wraps 20 Digital Multimeters 21 Card Reader 22 Laptop Kits 23 Laptop Spares: Cabinet With Display, Memory, Hard Disk, Battery Pack, Keyboard Membrane, Chargers 24 Smps Trainer Kit 25 Ups Trainer Kit 26 Laptop Kits 27 Windows Server Operating System 28 Windows Operating System 29 Linux Operating System 30 Network Management Software 31 Ms Office 32 Anti-Virus Software 33 Data Recovery Software 34 Linux Server Operating System ( Samba N / Su-Se ) N 35 Fire Fighting Equipments 36 Hardware And Network Trainer Kit N 37 Managed Layer 2 Ethernet Switch N8 Port 38 Managed Layer 2 Ethernet Switch N16 Port 39 Managed Layer 2 Ethernet Switch N24 Port 40 Managed Layer 3 Ethernet Switch 8 Port 41 Managed Layer 3 Ethernet Switch 16 Port 42 Managed Layer 3 Ethernet Switch 24 Port 43 Network Training System 44 Lan Protocol Simulation And Analyser Nsoftware 45 Network Cables – Utp 46 Network Cables – Coaxial, Flat, Ribbon 47 Crimping Tools 48 Network Camera ( Outdoor ) 49 Network Camera ( Indoor ) 50 Trade-Mechanic Consumer Electronic Appliances 51 Connecting Screwdriver 100Mm 52 Neon Tester 500 V 53 Screw Driver Set Set Of 7 54 Insulated Combination Pliers 150 Mm 55 Insulated Side Cutting Pliers 150 Mm 56 Long Nose Pliers 150 Mm 57 Soldering Iron 25 W. 240 V N 58 Electrician Knife 100 Mm 59 Laptops Latest Configuration 60 Digital Multimeter ( 3 3 / 4 Digit ) 4000 Counts 61 Soldering Iron Changeable Bits 15 W 240 V 62 De- Soldering Pump Electrical Heated, Manual Operators 230 V, 40 W 63 Laser Jet Printer 64 Electronic Circuit Simulation Software With 6 User Licenses Ncircuit Design And Simulation Software With Pcb Design With Gerber And G Code Generation, N3d View Of Pcb, Breadboard View, Fault Creation And Simulation. 65 Different Types Of Electronic And Electrical Cables, Connectors, Sockets, Terminations. 66 Different Types Of Analog Electronic Components, Digital Ics, Power Electronic Components, General Purpose Pcbs, Bread Board, Mcb, Elcb 67 Smd Soldering & De-Soldering Station With Necessary Accessories 68 Microcontroller Kits ( 8051 ) Along With Programming Software ( Assembly Level Programming ) Ncore 8051, Ready To Run Programmer For At89c51 / 52 & 55, Programming Modes Keypad And Pc Circuits. Ndetailed Learning Content Through Simulation Software. 69 Application Kits For Microcontrollers 6 Different Applications N1. Input Interface: 4X4 Matrix Keypad, Ascii Key Pad, Four Input Switch N2. Display Module 16X2 Lcd, Seven Nsegment, Led Bar Graph N3. Adc / Dac Module With Most Popular Dc / Dac0808 N4. Pc Interface: Rs232 & Usb N5. Motor Drive: Dc, Servo, Stepper N6. Daq: Data Acquisition To Sense Different Sensors Signals 70 Sensor Trainer Kit Containing Nfollowing Sensors N1. Thermocouple N2. Rtd N3. Load Cell / Strain Gauge N4. Lvdt N5. Smoke Detector Sensors N6. Speed Sensor N7. Limit Switch N8. Photo Sensors N9. Opto-Coupler N10. Proximity Sensor Ngraphical Touch Lcd With Inbuilt Processor For Viewing The Output Waveforms, In Built Daq, And Standard Processing Circuits Like Inverting, Non – Inverting, Power, Current, Instrumentation Differential Amplifier, F / V, V / F, V / I, I / V Converter, Sensors:Rtd, Ntc Thermistor, Lm35 Nthermocouple, Gas ( Smoke ) Sensor, Load Cell, Lvdt Sensor, Speed Sensor N 71 Ups 72 Mobile Phone Trainer 2G / 3G / 4G Dual Sim Gsm Handset Frequency Measurement And Band Verfication Real Time Mobile Operation 73 Smart Phone Of Different Make ( Android ) Realme / Readme 74 Solar Training Kit / Simulator With Built In Meters For Dcv, Dca, Ac Multifunction Meter ( For Aci, Acv, Power, Frequency ) , Protection Circuits, Bs-10 Terminals For Making The Connection, Nsingle / Dual Axis Tracking System Ncharge Controller: Pwm Based Mppt, Charging Stage: Bulk, Absorptions And Floatsolar Training Kit / Simulator N 75 Fire Buckets 76 Miilli Ammeter ( Ac ) 0-200Ma 77 Milli Ammeter ( Dc ) 0-500 Ma 78 Trade-Computer Operator And Programming Assistant 79 Wi–Fi Router Nwith Wireless Connectivity N 80 Structured Cabling In Lab Nto Enable Working With Wired Networks For Npractical N 81 Internet Connectivity Nbroadband Connection With Min. 2 Mbps Speed 82 Digital Web Cam Nhigh Resolution ( 3.1 Mp Or Higher ) 83 Dvd Or Blu-Ray Writer N24x Or Higher External ( Usb ) 84 Rj-45 Ncrimping Tool 85 4U For 24 Port Nnetwork Rack 86 3.5 Digit Handheld Type. Ndigital Multimeters 87 Standard Nscrew Driver Set 88 Mini Dongle For Bluetooth Devices Connection Nusb N 89 Headphone &Mic. Set Nwired 90 Sound System N2:1 91 1 Tb Nexternal Hard Disk 92 Patch Panel N24 Port 93 Lan Tester Nutp Cat5 Cable Tester ( Rj 45 ) 94 Punching Tool Nfor Punching Rj 45 Socket With Cat 5 Cable N. 95 Ms Office N2010 ( Professional ) Or The Latest Version Navailable At The Time Of Procurement 96 Dual Desk Or Chair And Ntables For Traineesstandard N N 97 White Board Nminimum 4X6 Feet 98 Fire Extinguisher Co2 N2 Kg 99 Fire Buckets Nstandard Size 100 Tally Erp 9 Or Latest 101 Trade-Welder 102 File Half Round Bastard 300 Mm 103 Screw Driver 300 Mm Blade N. 104 Letter Punch 6 Mm 105 Bench Grinder Fitted With Fine Grain Size Silicon Carbide Green Griding Wheel 106 Suitable Gas Welding Table With Fire Bricks 107 Portable Abrasive Cut Off Machine 108 Welding Simulators For Smaw 109 Welding Simulators For Staw 110 Welding Simulators For Smaw 111 Rubber Hose Clips 112 Trade-Dress Making 113 Measuring Tool 150 Mm 114 Machine Attachment 115 Dislay Board Covered With Glass Or Acrying Sheet 120 * 90 Cm 116 Printer Colour Laser 117 Work Station With Chair 118 Revolving Chai Without Arms 119 Storage Almirah 120 Trade - Machinist 121 Surface Plate N400 Mm X 400Mm Grade 122 Marking Off Table N1200 X 1200 X 600 Mm High With Nstand 123 Scribing Block Universal 300 Mm 124 V- Block N100 / 7 – 80 – A 125 300 Mm Ntry Square 126 Outside Spring Caliper N200 Mm 127 Divider Spring N200 Mm 128 Inside Spring Caliper N200 Mm 129 Straight Edge Steel N1 Meter 130 Straight Edge Steel 500 Mm 131 Steel Tape N2 Meter In Case 132 Steel Rule 60 Cm Graduated Both In English & Nmetric Units 133 Sprit Level N2v 250, 05 Meter 134 Hammer B.P. 800 Gms With Handle 135 Screw Driver, Heavy Duty N300 Mm With Handle 136 Hammer Lead N1 Kg. 137 Spindle Blade Screw Driver N100 Mm 138 Allen Hexagonal Keys N2.5 To 12 139 Spanner D.E. Nseries 2 ( Set Of 7 Pieces ) 140 Adjustable Spanner N300 Mm 141 Reduction Sleeve Morse 1-1 142 Reduction Sleeve Morse 3-1 143 Reduction Sleeve Morse 4-1 144 Reduction Sleeve Morse 4-2 145 Reduction Sleeve Morse 5-1 146 Reduction Sleeve Morse 5-2 147 Reduction Sleeve Morse 6-1 148 Angle Plate Size N200 X 100 X 200 Mm 149 Angle Plate Adjustable N250 X 150 X 175 Mm 150 Solid Parallels In Pairs ( Different Sizes ) In Nmetric 151 Oil Can Pressure Feed N500 Mg 152 Oil Stone N150 X 50 X 25 Mm 153 Number Drills H.S.S. ( Parallel Shank ) N 154 Punch Letter Set. N3 Mm 155 Punch Number Set N3 Mm 156 Twist Drills N3 Mm To 13 Mm In Step Of 0.5 Mm N ( Parallel Shank ) 157 Drill Chuck N0-13 Mm With Taper Shank 158 Centre Drill Na 1 To 5 159 Grinding Wheel Dresser ( Diamond 160 Grinding Wheel Dresser Huntington Type 161 Clamps C N100 Mm 162 Clamps C N200 Mm 163 Tap And Die Set In Box Metric Pitch N ( 6 Mm To 12 Mm ) 164 Drill H.S.S. Taper Shank N ( 6 Mm To 12 Mm In Step Of 0.5 Mm 165 File Half Round N2nd Cut 250 Mm 166 File Triangular Smooth N200 Mm 167 Needle File Set 168 File Square N2nd Cut 250 Mm 169 Reamer N6 Mm To 25 Mm By 1 Mm 170 Reamer Adjustable N10 Mm To 15 Mm Length 75 Mm 171 Tool Bits Nh.S.S. 6 Mm Square 172 Tool Bits Nh.S.S. 10 Mm Square 173 Tool Bits Holder ( Armstrong ) L.H 174 Tool Bits Holder ( Armstrong ) R.H. 175 Assorted Tools And Bit Holders For Lathe, Nshaper, Slotter& Planner In Different Shapes And Sizes 176 Hacksaw Frame Adjustable 250-300 Mm With Blades 177 Table Chuck N75 Mm Jaw Swivel Base 178 Bench Vice N100 Mm Jaw 179 Machine Vice N200 Mm Swivel Base 180 Machine Vice Nswivel Base -150 Mm 181 Hand Vice N50 Mm Jaw 182 Radius Turning Attachment 183 Angle Turning Attachment 184 Compound Angle Vice ( Standard Sine ) 185 Universal Machine Vice N100 Mm 186 Universal Table Angle Plate N150 X 150 X 150 Mm 187 Shaper Tool Holder Turret Type To Suit The Machine 188 Base Chuck For Slotter To Suit The Nmachine 189 Shaper Indexing Center To Suit The Nmachine 190 Knurling Tools N ( Set Of 3 ) Straight And Diamond 191 Plier Cutting N200 Mm N 192 Carbide Tipped Tools Of Different Sizes Nand Shapes ( Throw Away Tips ) 193 Hand Hammer 1 Kg With Handle 194 Digital Multimeter N0 To 500 V 195 Variable Resistance Box Nresistors With 220? 196 Variable Resistance Box Nresistors With 150? 197 Variable Resistance Box Nresistors With 1K? 198 Variable Resistance Box Nresistors With 33? 199 Variable Resistance Box Nresistors With 100? 200 Variable Resistance Box Nresistors With 1.2? 201 Dc Battery With Cap N9v 202 Dual Power Supply N ( 230V, 50Hz, Fuse-800Ma ) 203 Solder Iron N ( 350V ) , Solder Lead, Pcb Board N ( Groove Board ) , Solder Wick 204 Inductor N ( 400 Turns, , I-Core , E-Core, U- Ncore, Laminated Core 205 Inductor N ( 200 Turns, , I-Core , E-Core, U- Ncore, Laminated Core 206 Inductor N ( 600 Turns, , I-Core , E-Core, U- Ncore, Laminated Core 207 Inductor N ( 1200 Turns, , I-Core , E-Core, U- Ncore, Laminated Core 208 Relay N ( 5V ) , Led ( 5V ) 209 Function Generator N ( 230V, 50Hz, Watts-12Va, Fuse- N150ma ) 210 Bread Board 211 Synchronous Motor N240v, 60Rpm ) , Capacitor For Nsynchronous Motor ( 0.8Mf ± 5% 450 Nvac ) 212 Power Chord Nconnecting Probes, Single Strand & Nmulti Strand Wires 213 Power Supply N ( 0-30V Dc, 3A ) 214 Sensor Kit I. Mounting Plate 215 Ii. Power Distribution Box ( 24V Dc, 4A ) 216 Iii. Counter Box N ( 10-30V Dc / 0.05A ) 217 Iv. Indication Box N ( 24V Dc ) 218 V. Material Box 219 Vi. Inductive Sensor N ( 10-30 V Dc, Pnp, No, 5Mm ( Range ) ) 220 Vii. Capacitive Sensor N ( 10-30 V Dc, Pnp, No, 2- N8mm ( Range ) 221 Viii. Magnetic Sensor N ( 10-60 V Dc , Pnp, No, 60Mm N ( Range ) ) 222 Ix. Ultrasonic Sensor N ( 20-30 V Dc, Pnp, No, 80- N300mm ( Range ) ) 223 X. Connecting Wires 224 Xi. Motor With Control Unit N ( 24V Dc, 1A ) 225 Milling Cutter - Cylindrical Cutter Nø 63 Mm, 90 Mm Length And 27 Mm Nbore Diameter 226 Milling Cutter - Cylindrical Cutter Nø 80 Mm, 90 Mm Length And 27 Mm Nbore Diameter 227 Milling Cutter Nside And Face Cutter Dia 100 X 10 X N27 Mm 228 Milling Cutter Nside And Face Cutter Dia 100 X 12 X N27 Mm 229 Milling Cutter Nside And Face Cutter Dia 160 X 10 X N27 Mm 230 Milling Cutter Nside And Face Cutter Dia 160 X 16 X N27 Mm 231 Milling Cutter - Side And Face Cutter Ndia 200 X 20 X 27 Mm 232 Milling Cutter - Side And Face Cutter Ndia 80 X 8 X 27 Mm 233 Milling Cutter - Equal Angle Cutter N45° / 100 Mm X 27 Mm Bore Dia 234 Milling Cutter - Equal Angle Cutter N60° / 100 Mm X 27 Mm Bore Dia 235 Milling Cutter - Equal Angle Cutter N90° / 100 Mm 27 Mm Bore Dia 236 Milling Cutter - Double Angle Unequal Ncutter 50 X 12 X 27 Mm Bore Dia55° N 237 Milling Cutter - Double Angle Unequal Ncutter 50 X 12 X 27 Mm Bore Dia 60 238 Milling Cutter - Double Angle Unequal Ncutter 63 X 18 X 27 Mm Bore Dia 70 239 Milling Cutter - Double Angle Unequal Ncutter 63 X 18 X 27 Mm Bore Dia 75° 240 Milling Cutter - Single Angle Cutter 63 X 18 X 45° Rh 27 Mm Bore Ndia 241 Milling Cutter - Single Angle Cutter Cutter 63 X 18 X 45°Lh 27 Mm Bore Ndia 242 Milling Cutter - Single Angle Ncutter 63 X 18 X 60° Lh 27 Mm Bore Ndia 243 Milling Cutter - Single Angle Ncutter 63 X 18 X 60°Rh 27 Mm Bore Ndia 244 Milling Cutter - Slitting Saw Cutter Nø 75 X 3 X Ø 27 Mm 245 Milling Cutter - Slitting Saw Cutter Nø 100 X 6 X Ø 27 Mm 246 Milling Cutter - Shell End Mill Nø 50 X 36 X 27 Mm, Preferably Ninserted Tip Type 247 Milling Cutter - Shell End Mill Nø 75 Mm X 50 X 27 Mm, Preferably Ninserted Tip Type 248 Ø 6, Ø 10 And Ø 16 Are ( Double Nfluted ) , Ø 20 Mm & Ø 25Mm ( Four Fluted ) Milling Cutter - Parallel Shank End Mills N 249 Ø 17.5 X 8 Mm Width X Diameter Of Shank 8 Mm Nmilling Cutter - T Slot Cutter With Nparallel Shank 250 Milling Cutter - Concave Nø 63 X 6 Radius X 27 Mm Bore Ndiameter 251 Ø 63 X 6 Radius X 27 Mm Bore Ndiametermilling Cutter - Convex 252 Milling Cutter - Disc Type Form ( Involutes Form - 2 Module, 20° Npressure Angle ) 253 Direct Reading Vernier Caliper N0- 300 ( Direct Reading With Dial 254 Digital Vernier Caliper N0- 300 Mm 255 Vernier Height Gauge Q N250 Mm N 256 Vernier Gear Tooth Caliper 257 Vernier Bevel Protractor Nwith 150 M Blade 258 Combination Set Nwith 300 Mm Rule N 259 Bevel Gauge N200 Mm 260 Telescopic Gauge N8 Mm To 150 Mm 261 Sine Bar N200 Mm 262 Universal Dial Test Indicator Nplunger Type - Range 0 - 10 Mm, Ngraduation 0.01 Mm Complete With Clamping Devices And Magnetic Stand 263 Centre Gauge Com. N60°, N 264 Centre Gauge Com. N55° N 265 Centre Gauge Com. N 29° N 266 Gauge Slip Box Nmetric - 87 Pieces Set 267 Gauge Screw Pitch Nmetric -0.25 To 6 Mm 268 Gauge - Radius Set N1 Mm To 25 Mm By 0.5 Mm 269 Limit Plug Gauges N5 Mm To 25 Mm By 2.5 Mm 270 Ring Gauges N5 Mm To 25 M By 2.5 Mm ( Go & No Ngo ) 271 Taper Gauge M.T. No. 1, 2, 3, 4 & 5 N 272 Gauge Feeler / Thickness N0.05 Mm To 0.3 Mm By 0.05 And 0.4 Nmm To 1 Mm By 0.1 Mm - 13 Leaves 273 Safety Glass 274 Planer Gauge Standard Size 275 Magnifying Glass N75 Mm 276 Trade-Diesel Machanic 277 Electrician Screw Driver N250mm 278 Screw Driver Blade N30 Cm. X 9 Mm. N N 279 Blow Lamp N1 Litre 280 Chain Pulley Block Capacity With Tripod Nstand3 Ton 281 Chisel Flat N10 Cm 282 Chisels Cross Cut N200 Mm X 6Mm 283 Circlip Pliers Expanding And Contracting 15Cm And 20Cm 284 Dividers With Spring N15 Cm 285 Drift Punch Copper N15 Cm 286 Drill Point Angle Gauge 287 Drill Twist ( Various Sizes ) N1.5 Mm To 15 Mm By N0.5Mm 288 Engineers Stethoscope 289 Files Assorted Sizes And Types Including Safe Nedge File ( 20 Nos ) 290 Gloves For Welding Nleather And Asbestos N N 291 Glow Plug Tester 292 Growler 293 Hammer Chipping N0.25 Kg 294 Hammer Copper With Handle N1 Kg 295 Hand Reamers Adjustable N10.5 To 11.25 Mm, 296 Hand Reamers Adjustable 11.25 To N12.75 Mm, 297 Hand Reamers Adjustable N12.75 To 14.25 Mm N 298 Hand Reamers Adjustable N14.25 To 15.75 Mm 299 Hand Shear Universal N250mm 300 Insulated Screw Driver N30 Cm X 9Mm Blade 301 Left Cut Snips N250mm 302 Magnifying Glass N75mm 303 Marking Out Table N90 X 60 X 90 Cm. 304 Oil Stone N15 Cm X 5 Cm X 2.5 Cm 305 Prick Punch N15 Cm N 306 Punch Letter 4Mm ( Number ) N 307 Right Cut Snips N250mm N 308 Rivet Sets Snap And Dolly Combined N3mm N 309 Rivet Sets Snap And Dolly Combined N4mm N 310 Rivet Sets Snap And Dolly Combined N6mm N 311 Scraper Flat N25 Cm 312 Scraper Half Round N25 Cm 313 Scraper Triangular N25 Cm 314 Scriber N15 Cm 315 Tinnman’S Shear N450 Mm X 600Mm 316 Soldering Copper Nhatchet Type 500Gms 317 Solid Parallels In Pairs ( Different Size ) In Nmetric 318 Spanner Clyburn N15 Cm N 319 Spanner D.E. Set Of 12 Pieces N6mm To 32Mm 320 Spanner T. Flocks For Screwing Up And Up- Screwing Inaccessible N 321 Spanners Socket With Speed Handle, T-Bar, Nratchet And Universal 322 Spark Lighter 323 Straight Edge Gauge 4 Ft. 324 Stud Extractor Set Of 3 325 Taps And Dies Complete Sets ( 5 Types ) 326 Taps And Wrenches - Metric 327 Telescope Gauge N 328 Temperature Gauge With Sensor N0-100 0C 329 Trammel N30 Cm 330 V’ Block 75 X 38 Mm Pair With Clamps 331 Air Conditioned Crdi Vehicle In Running Ncondition -Lmv 332 Gas Welding Table N1220mm X760mm 333 Heavy Commercial Vehicle Type ( Without Nbody On Frame ) 334 Liquid Penetrate Inspection Kit 335 Tin Smiths Bench Folder N600 X 1.6Mm N N 336 Welding Transformer N150-300 Amps 337 Arbor Press Hand Operated 2 Ton Capacity 338 Automotive Exhaust 5 Gas Analyser N ( Petrol & Diesel ) Or Diesel Smokemeter N 339 Bench Lever Shears 340 Multi Scan Tool With Oscilloscope 341 Pipe Bending Machine ( Hydraulic Type N12mm To 30Mm 342 Pneumatic Rivet Gun With Standard Naccessories 343 Tin Smiths Bench Folder N600 X 1.6Mm N 344 Welding Plant Oxy-Acetylene Complete ( Nhigh Pressure ) N N 345 Welding Transformer N150-300 Amps 346 Trade- Refrigeration And Air Conditioning Technician 347 Quick Couples, Process Tube Nadopter¼” 348 Quick Couples, Process Tube Nadopter3 / 8” N N 349 Tong Close Mouth And Pick 350 Bending Spring External Type, Nfor Copper Tube3mm To 16Mm Dia 351 Capillary Plug Gauge 352 ( Hollo ) Punch Hole For Cutting Ngasket4.7-16Mm Die 353 T-Allen Key Set Nsize 5 / 32 To 1 / 8 354 Tap Set With Matching Drills N3 Mm To 16Mm 355 Plumbing Hammer Weight N200 Gm N 356 Torque Wrench N300mm-12.7Mm 357 Piercing Valve N¼ Inch 358 Four Way Reversible Valve 359 Service Oscillator 360 C.R.O Single Beam N5 Mhz N 361 C.R.O Dual Trace / Double Beam N60 Mhz 362 A.F.O Oscillators 363 Electronic Leak Detector 364 Sling Psychrometer Mounted On Aluminum Back, Nscale -100 C To +1100 C 365 Oxy-Acetylene Welding Set Ncompletecylinders, Regulators Welding Ntorches With Difference Nozzles 366 Single Door Direct Cool Nrefrigerator, Carrying With Hfc Nand Hc185 L N 367 Frost Free Refrigerator N200l Carrying With Hc Blend N N 368 Three / Four Door Refrigerator ( Ninverter Type ) 300L Carrying With Hc R-600A 369 Core Drill Machine 370 Bench Drilling Machine N20 Mm Capacity, 200-2500Rpm 371 Grinding Machine N200mm, 3000Rpm, Double Ended1 / 2 Nhp 372 Evacuating And Refrigerant Charging Station, Consist Of Na ) Rotary Two Stage Vacuum Pump And Motor ( With Gas Ballast And Anti-Such Back ) Nb ) Manifold With Gauges And Nvalves And Capable Of Pulling Nvacuum Up To 50 Microns Of Hg Nand With Provision Of Connecting Nto A Microns Level Vacuum Gauge Nb ) Graduated Charging Cylinder Nwith Provision For Temperature Ncorrection And All Necessary Nisolating Valves ( Cap. 2 Kg. In Lieu Of ( B ) Above And Nwith Accuracyof + / - G For Charging Hydrocarbons 373 Evacuating And Charging Station Nas Above But Fitted With Weighing Scale 374 Two Stage Rotary Vacuum Pump, 3Or 4 Cfm Ncapacity Approx. 60 - 10Rmp Capable Of Evacuating To 50 Microns Of Hg And Fitted With Gas Ballast Anti-Such Back Valve And Single- Nphase Motor N N 375 Dry N2 Cylinder N2 Stage Regulator Or Commercial N2 In Cylinder With Drier Unit And 2 Stage Regulator & Meter Cube N N 376 Window A.C N1 Ton With R-22 Blend Reciprocating Compressor N 377 Split A.C N1.5 Ton With R134a Or R-22 Reciprocating Compressor N N 378 Duct Able Split A.C 1.5 Ton N1.5 Ton With R134a Or R-22 Reciprocating Compressor N N 379 Recovery Unit With Cylinders Ncfc, Hfc&Hcfc N 380 Decibel Meter N30-100 Db N 381 Cassette Air Conditioner N4500 Kcal / Hr 382 De Scaling Pump Set Nwith Stainless Steel Impeller And Housing Complete With Motor 1 / 2 Hp And Accessories 383 Fan Coil Unit Nwith Water Valves ( 2 & 3 Way ) 384 Shell And Tube, Dx Chillers N ( Small ) 5 Ton With Cu Tubing Only N 385 Circulating Water Pump ( Small N0.5 H.P With Stainless Steel Tank Capacity 20 Liters Within Let / Outlet Provision. 386 Refrigerant Cylinder N10 Kg Capacity 387 Gauge Manifold With Gauges Ndifferent Size Of Hoses For R N134a, R22 And R 410. 388 Shell And Tube Type Condenser N5 Ton 389 Rotary Hermetic Compressor N2 Ton 390 Bottle Cooler Visible N200 L Carrying With Hfc-134A& Nreciprocating Compressor 391 Deep Freezer N200 L Carrying With Hfc-134A& Nreciprocating Compressor 392 Display Cabinet N2 Ton Capacity 393 Water Cooler Storage Type N200 L Carrying With Hfc-134A& Nreciprocating Compressor 394 Water Dispenser Bubble Type N ( Hot And Cold2.5 To 3Ltr. Delivery Capacity Per Hour N 395 Ice Candy Plant N2 Ton With Capacity To Make 32 Ice Candy At A Time With Forma Tray, Stainless Steel Tank On Trolley N 396 Air-Conditioning, Direct System Ncomplete With All Controls Including Humidity Control N 397 Air-Conditioning, Indirect System. ( Water Cooled ) Ncomplete With All Controls Including Humidity Control N 398 Package A / C N5-Ton Capacity, Air Cooled Type With Open Type Compressor Reciprocating Type N 399 Car A.C Components ( Full Kit ) Na ) Wobble Plate Compressor With Mounting Brackets. Nb ) Serpentine Evaporator C ) Parallel Flow Condenser Nd ) Hoses, Tubes, Receiver, Ex.Valve. Ne ) Electrical Components & Nwiring Harness 400 Car Ac Tutorial Model 401 Bus Ac Tutorial Model 402 Automatic Ice Cube M / C N50 Kg / Hour 403 Storage Type Water Cooler ( Hot And Cold ) 404 Visi Cooler N185 L 405 Vrf / Vrv Unit With Two Indoor Units 2.5Tr Each And 5Tr Capacity Out Door Unit Complete With Air Cooled Condenser, Accessories And Controls. N N 406 Split A / C ( Inverter Technology ) N1.5 Tr N 407 Walk In Cooler Puf Insulated For Cold Room 6X4.5X8 Cft. Ntemperature 00-50 C N N 408 Absorption System Nsmall Size N N

INR 700 /-

INR 200000.0 /-

Refer document

Name of Work:SUPPLY OF TOOLS EQUIPMENTS AND MACHINARY
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	TRADE(INFORMATION AND COMMUNICATION TECHNOLOGY SYSTEM MAINTENANCE	BI01010001010000000000000515BI0100001112
2	1.01	Connecting screwdriver 100MM	BI01010001010000000000000515BI0100001113	1	Nos
3	1.02	Neon tester 500 V	BI01010001010000000000000515BI0100001114	1	Nos
4	1.03	Screw driver set SET OF 5	BI01010001010000000000000515BI0100001115	1	Nos
5	1.04	Insulated combination pliers 150 mm	BI01010001010000000000000515BI0100001116	1	Nos
6	1.05	Insulated side cutting pliers 150 mm	BI01010001010000000000000515BI0100001117	1	Nos
7	1.06	Long nose pliers 150 mm	BI01010001010000000000000515BI0100001118	1	Nos
8	1.07	Soldering iron 25 W. 240 V\n	BI01010001010000000000000515BI0100001119	1	Nos
9	1.08	Electrician knife	BI01010001010000000000000515BI0100001120	1	Nos
10	1.09	Tweezers 100mm\n	BI01010001010000000000000515BI0100001121	1	Nos
11	1.1	Digital Multimeter	BI01010001010000000000000515BI0100001122	1	Nos
12	1.11	Soldering Iron Changeable bits 15 W	BI01010001010000000000000515BI0100001123	1	Nos
13	1.12	De- soldering pump	BI01010001010000000000000515BI0100001124	1	Nos
14	1.13	Server Computer CPU: 32/64 Bit i3/i5/i7 or latest processor, Speed: 3 GHz or Higher\nServer Computer	BI01010001010000000000000515BI0100001125	1	Nos
15	1.14	Laptop, Notebook	BI01010001010000000000000515BI0100001126	1	Nos
16	1.15	Intel Mobile Desktop based PC with LCD\nmonitor CPU: 32/64 Bit i3/i5/i7 or latest processor, Speed: 3 GHz or Higher. RAM:-4 GB DDR-III or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, with USB Mouse, USB Keyboard and Monitor (Min. 17\nInch. Licensed Operating System and Antivirus compatible with trade related software.	BI01010001010000000000000515BI0100001127	1	Nos
17	1.16	Tablet	BI01010001010000000000000515BI0100001128	1	Nos
18	1.17	Power Meter	BI01010001010000000000000515BI0100001129	1	Nos
19	1.18	Anti static wrist wraps	BI01010001010000000000000515BI0100001130	1	Nos
20	1.19	Digital Multimeters	BI01010001010000000000000515BI0100001131	1	Nos
21	1.2	Card Reader	BI01010001010000000000000515BI0100001132	1	Nos
22	1.21	Laptop kits	BI01010001010000000000000515BI0100001133	1	Nos
23	1.22	Laptop spares: Cabinet with display, memory, hard disk, battery pack, keyboard membrane, chargers	BI01010001010000000000000515BI0100001134	1	Nos
24	1.23	SMPS Trainer kit	BI01010001010000000000000515BI0100001135	1	Nos
25	1.24	UPS Trainer kit	BI01010001010000000000000515BI0100001136	1	Nos
26	1.25	Laptop kits	BI01010001010000000000000515BI0100001137	1	Nos
27	1.26	Windows Server Operating System	BI01010001010000000000000515BI0100001138	1	Nos
28	1.27	Windows Operating System	BI01010001010000000000000515BI0100001139	1	Nos
29	1.28	Linux Operating System	BI01010001010000000000000515BI0100001140	1	Nos
30	1.29	Network Management Software	BI01010001010000000000000515BI0100001141	1	Nos
31	1.3	MS Office	BI01010001010000000000000515BI0100001142	1	Nos
32	1.31	Anti-virus software	BI01010001010000000000000515BI0100001143	1	Nos
33	1.32	Data recovery software	BI01010001010000000000000515BI0100001144	1	Nos
34	1.33	LINUX Server Operating System (Samba\n/ Su-se)\n	BI01010001010000000000000515BI0100001145	1	Nos
35	1.34	Fire Fighting Equipments	BI01010001010000000000000515BI0100001146	1	Nos
36	1.35	Hardware and Network Trainer Kit \n	BI01010001010000000000000515BI0100001147	1	Nos
37	1.36	Managed Layer 2 Ethernet Switch\n8 port	BI01010001010000000000000515BI0100001148	1	Nos
38	1.37	Managed Layer 2 Ethernet Switch\n16 port	BI01010001010000000000000515BI0100001149	1	Nos
39	1.38	Managed Layer 2 Ethernet Switch\n24 port	BI01010001010000000000000515BI0100001150	1	Nos
40	1.39	Managed Layer 3 Ethernet Switch 8 port	BI01010001010000000000000515BI0100001151	1	Nos
41	1.4	Managed Layer 3 Ethernet Switch 16 port	BI01010001010000000000000515BI0100001152	1	Nos
42	1.41	Managed Layer 3 Ethernet Switch 24 port	BI01010001010000000000000515BI0100001153	1	Nos
43	1.42	Network Training System	BI01010001010000000000000515BI0100001154	1	Nos
44	1.43	LAN Protocol Simulation and Analyser\nSoftware	BI01010001010000000000000515BI0100001155	1	Nos
45	1.44	Network cables – UTP	BI01010001010000000000000515BI0100001156	1	Nos
46	1.45	Network Cables – coaxial, flat, ribbon	BI01010001010000000000000515BI0100001157	1	Nos
47	1.46	Crimping Tools	BI01010001010000000000000515BI0100001158	1	Nos
48	1.47	Network Camera (Outdoor)	BI01010001010000000000000515BI0100001159	1	Nos
49	1.48	Network Camera (Indoor)	BI01010001010000000000000515BI0100001160	1	Nos
50	2	TRADE-MECHANIC CONSUMER ELECTRONIC APPLIANCES	BI01010001010000000000000515BI0100001161
51	2.01	Connecting screwdriver 100MM	BI01010001010000000000000515BI0100001162	1	Nos
52	2.02	Neon tester 500 V	BI01010001010000000000000515BI0100001163	1	Nos
53	2.03	Screw driver set SET OF 7	BI01010001010000000000000515BI0100001164	1	Nos
54	2.04	Insulated combination pliers 150 mm	BI01010001010000000000000515BI0100001165	1	Nos
55	2.05	Insulated side cutting pliers 150 mm	BI01010001010000000000000515BI0100001166	1	Nos
56	2.06	Long nose pliers 150 mm	BI01010001010000000000000515BI0100001167	1	Nos
57	2.07	Soldering iron 25 W. 240 V\n	BI01010001010000000000000515BI0100001168	1	Nos
58	2.08	Electrician knife 100 mm	BI01010001010000000000000515BI0100001169	1	Nos
59	2.09	Laptops latest configuration	BI01010001010000000000000515BI0100001170	1	Nos
60	2.1	Digital Multimeter (3 3/4 digit) 4000 counts	BI01010001010000000000000515BI0100001171	1	Nos
61	2.11	Soldering Iron Changeable bits 15 W 240 v	BI01010001010000000000000515BI0100001172	1	Nos
62	2.12	De- soldering pump electrical heated, manual operators 230 V, 40 W	BI01010001010000000000000515BI0100001173	1	Nos
63	2.13	Laser jet Printer	BI01010001010000000000000515BI0100001174	1	Nos
64	2.14	Electronic circuit simulation software with 6 user licenses\nCircuit Design and Simulation Software with PCB Design with Gerber and G Code Generation,\n3D View of PCB, Breadboard View, Fault Creation and Simulation.	BI01010001010000000000000515BI0100001175	1	Nos
65	2.15	Different types of electronic and electrical cables, connectors, sockets, terminations.	BI01010001010000000000000515BI0100001176	1	Nos
66	2.16	Different types of Analog electronic components, digital ICs, power electronic components, general purpose PCBs, bread board, MCB, ELCB	BI01010001010000000000000515BI0100001177	1	Nos
67	2.17	SMD Soldering & De-soldering Station with necessary accessories	BI01010001010000000000000515BI0100001178	1	Nos
68	2.18	Microcontroller kits (8051) along with programming software (Assembly level Programming)\nCore 8051, ready to run programmer for AT89C51/52 & 55, programming modes Keypad and PC circuits.\nDetailed learning content through simulation software.	BI01010001010000000000000515BI0100001179	1	Nos
69	2.19	Application kits for Microcontrollers 6 different applications\n1. Input Interface: 4x4 Matrix Keypad, ASCII Key PAD, Four Input Switch\n2. Display Module 16X2 LCD, Seven\nSegment, LED Bar Graph\n3. ADC/DAC Module with most popular DC/DAC0808\n4. PC Interface: RS232 & USB\n5. Motor Drive: DC, Servo, Stepper\n6. DAQ: Data Acquisition to sense different sensors signals	BI01010001010000000000000515BI0100001180	1	Nos
70	2.2	Sensor Trainer Kit Containing\nFollowing Sensors\n1. Thermocouple\n2. RTD\n3. Load Cell/ Strain Gauge\n4. LVDT\n5. Smoke Detector Sensors\n6. Speed Sensor\n7. Limit Switch\n8. Photo sensors\n9. Opto-coupler\n10. Proximity Sensor\nGraphical touch LCD with inbuilt processor for viewing the output waveforms, In built DAQ, and standard processing circuits like Inverting, Non – Inverting, Power, Current, Instrumentation Differential Amplifier, F/V,V/F,V/I,I/V Converter, Sensors:RTD,NTC Thermistor,LM35\nThermocouple, Gas(Smoke) Sensor, Load cell, LVDT Sensor, Speed Sensor\n	BI01010001010000000000000515BI0100001181	1	Nos
71	2.21	UPS	BI01010001010000000000000515BI0100001182	1	Nos
72	2.22	Mobile phone trainer 2G/3G/4G dual sim GSM handset Frequency measurement and band verfication real time mobile operation	BI01010001010000000000000515BI0100001183	1	Nos
73	2.23	Smart phone of different make (android) REALME/README	BI01010001010000000000000515BI0100001184	1	Nos
74	2.24	Solar Training Kit/ Simulator With built in meters for DCV, DCA, AC multifunction Meter (for ACI, ACV, Power,Frequency), Protection Circuits, BS-10 terminals for making the connection,\nSingle/ Dual axis tracking system\nCharge Controller: PWM based MPPT, Charging Stage: Bulk, Absorptions and FloatSolar Training Kit/ Simulator\n	BI01010001010000000000000515BI0100001185	1	Nos
75	2.25	Fire Buckets	BI01010001010000000000000515BI0100001186	1	Nos
76	2.26	Miilli Ammeter (AC) 0-200mA	BI01010001010000000000000515BI0100001187	1	Nos
77	2.27	Milli Ammeter (DC) 0-500 mA	BI01010001010000000000000515BI0100001188	1	Nos
78	3	TRADE-COMPUTER OPERATOR AND PROGRAMMING ASSISTANT	BI01010001010000000000000515BI0100001189
79	3.01	Wi–Fi Router\nWith Wireless Connectivity\n	BI01010001010000000000000515BI0100001190	1	Nos
80	3.02	Structured cabling in Lab\nto enable working with Wired Networks for\nPractical\n	BI01010001010000000000000515BI0100001191	1	Nos
81	3.03	Internet Connectivity\nBroadband connection with min. 2 mbps speed	BI01010001010000000000000515BI0100001192	1	Nos
82	3.04	Digital Web Cam\nHigh Resolution(3.1 mp or higher)	BI01010001010000000000000515BI0100001193	1	Nos
83	3.05	DVD or Blu-Ray Writer\n24X or higher external (usb)	BI01010001010000000000000515BI0100001194	1	Nos
84	3.06	RJ-45\nCrimping Tool	BI01010001010000000000000515BI0100001195	1	Nos
85	3.07	4U for 24 port\nNetwork Rack	BI01010001010000000000000515BI0100001196	1	Nos
86	3.08	3.5 digit handheld type.\nDigital Multimeters	BI01010001010000000000000515BI0100001197	1	Nos
87	3.09	Standard\nScrew Driver Set	BI01010001010000000000000515BI0100001198	1	Nos
88	3.1	Mini Dongle for Bluetooth devices Connection\nUSB\n	BI01010001010000000000000515BI0100001199	1	Nos
89	3.11	Headphone &mic. set\nWired	BI01010001010000000000000515BI0100001200	1	Nos
90	3.12	Sound System\n2:1	BI01010001010000000000000515BI0100001201	1	Nos
91	3.13	1 TB\nExternal Hard Disk	BI01010001010000000000000515BI0100001202	1	Nos
92	3.14	Patch Panel\n24 Port	BI01010001010000000000000515BI0100001203	1	Nos
93	3.15	LAN Tester\nUTP cat5 cable tester (RJ 45)	BI01010001010000000000000515BI0100001204	1	Nos
94	3.16	Punching Tool\nfor punching RJ 45 socket with cat 5 cable\n.	BI01010001010000000000000515BI0100001205	1	Nos
95	3.17	MS Office\n2010 (professional) or the latest version\navailable at the time of procurement	BI01010001010000000000000515BI0100001206	1	Nos
96	3.18	Dual Desk or Chair and\nTables for TraineesStandard\n\n	BI01010001010000000000000515BI0100001207	1	Nos
97	3.19	White Board\nminimum 4X6 feet	BI01010001010000000000000515BI0100001208	1	Nos
98	3.2	Fire Extinguisher CO2\n2 KG	BI01010001010000000000000515BI0100001209	1	Nos
99	3.21	Fire Buckets\nStandard size	BI01010001010000000000000515BI0100001210	1	Nos
100	3.22	Tally ERP 9 or Latest	BI01010001010000000000000515BI0100001211	1	Nos
101	4	TRADE-WELDER	BI01010001010000000000000515BI0100001212
102	4.01	File half round bastard 300 mm	BI01010001010000000000000515BI0100001213	1	Nos
103	4.02	Screw Driver 300 mm blade\n.	BI01010001010000000000000515BI0100001214	1	Nos
104	4.03	Letter punch 6 mm	BI01010001010000000000000515BI0100001215	1	Nos
105	4.04	Bench grinder fitted with fine grain size silicon carbide green griding wheel	BI01010001010000000000000515BI0100001216	1	Nos
106	4.05	Suitable gas welding table with fire bricks	BI01010001010000000000000515BI0100001217	1	Nos
107	4.06	portable abrasive cut off machine	BI01010001010000000000000515BI0100001218	1	Nos
108	4.07	Welding simulators for SMAW	BI01010001010000000000000515BI0100001219	1	Nos
109	4.08	Welding simulators for STAW	BI01010001010000000000000515BI0100001220	1	Nos
110	4.09	Welding simulators for SMAW	BI01010001010000000000000515BI0100001221	1	Nos
111	4.1	Rubber hose clips	BI01010001010000000000000515BI0100001222	1	Nos
112	5	TRADE-DRESS MAKING	BI01010001010000000000000515BI0100001223
113	5.01	Measuring tool 150 mm	BI01010001010000000000000515BI0100001224	1	Nos
114	5.02	Machine attachment	BI01010001010000000000000515BI0100001225	1	Nos
115	5.03	Dislay Board covered with glass or acrying sheet 120 * 90 cm	BI01010001010000000000000515BI0100001226	1	Nos
116	5.04	Printer colour laser	BI01010001010000000000000515BI0100001227	1	Nos
117	5.05	Work station with chair	BI01010001010000000000000515BI0100001228	1	Nos
118	5.06	Revolving chai without arms	BI01010001010000000000000515BI0100001229	1	Nos
119	5.07	Storage almirah	BI01010001010000000000000515BI0100001230	1	Nos
120	6	TRADE - MACHINIST	BI01010001010000000000000515BI0100001231
121	6.01	Surface plate\n400 mm x 400mm grade	BI01010001010000000000000515BI0100001232	1	Nos
122	6.02	Marking off table\n1200 x 1200 x 600 mm high with\nstand	BI01010001010000000000000515BI0100001233	1	Nos
123	6.03	Scribing block universal 300 MM	BI01010001010000000000000515BI0100001234	1	Nos
124	6.04	V- Block\n100/7 – 80 – A	BI01010001010000000000000515BI0100001235	1	Nos
125	6.05	300 mm\nTry square	BI01010001010000000000000515BI0100001236	1	Nos
126	6.06	Outside spring caliper\n200 mm	BI01010001010000000000000515BI0100001237	1	Nos
127	6.07	Divider spring\n200 mm	BI01010001010000000000000515BI0100001238	1	Nos
128	6.08	Inside spring caliper\n200 mm	BI01010001010000000000000515BI0100001239	1	Nos
129	6.09	Straight edge steel\n1 meter	BI01010001010000000000000515BI0100001240	1	Nos
130	6.1	Straight edge steel 500 MM	BI01010001010000000000000515BI0100001241	1	Nos
131	6.11	Steel tape\n2 meter in case	BI01010001010000000000000515BI0100001242	1	Nos
132	6.12	Steel rule 60 cm graduated both in English &\nMetric units	BI01010001010000000000000515BI0100001243	1	Nos
133	6.13	Sprit level\n2V 250, 05 meter	BI01010001010000000000000515BI0100001244	1	Nos
134	6.14	Hammer B.P. 800 gms with handle	BI01010001010000000000000515BI0100001245	1	Nos
135	6.15	Screw driver, heavy duty\n300 mm with handle	BI01010001010000000000000515BI0100001246	1	Nos
136	6.16	Hammer lead\n1 kg.	BI01010001010000000000000515BI0100001247	1	Nos
137	6.17	Spindle blade screw driver\n100 mm	BI01010001010000000000000515BI0100001248	1	Nos
138	6.18	Allen Hexagonal keys\n2.5 to 12	BI01010001010000000000000515BI0100001249	1	Nos
139	6.19	Spanner D.E.\nseries 2 (set of 7 pieces)	BI01010001010000000000000515BI0100001250	1	Nos
140	6.2	Adjustable spanner\n300 mm	BI01010001010000000000000515BI0100001251	1	Nos
141	6.21	Reduction sleeve Morse 1-1	BI01010001010000000000000515BI0100001252	1	Nos
142	6.22	Reduction sleeve Morse 3-1	BI01010001010000000000000515BI0100001253	1	Nos
143	6.23	Reduction sleeve Morse 4-1	BI01010001010000000000000515BI0100001254	1	Nos
144	6.24	Reduction sleeve Morse 4-2	BI01010001010000000000000515BI0100001255	1	Nos
145	6.25	Reduction sleeve Morse 5-1	BI01010001010000000000000515BI0100001256	1	Nos
146	6.26	Reduction sleeve Morse 5-2	BI01010001010000000000000515BI0100001257	1	Nos
147	6.27	Reduction sleeve Morse 6-1	BI01010001010000000000000515BI0100001258	1	Nos
148	6.28	Angle plate size\n200 x 100 x 200 mm	BI01010001010000000000000515BI0100001259	1	Nos
149	6.29	Angle plate adjustable\n250 x 150 x 175 mm	BI01010001010000000000000515BI0100001260	1	Nos
150	6.3	Solid parallels in pairs (different sizes) in\nMetric	BI01010001010000000000000515BI0100001261	1	Nos
151	6.31	Oil Can pressure feed\n500 mg	BI01010001010000000000000515BI0100001262	1	Nos
152	6.32	Oil stone\n150 x 50 x 25 mm	BI01010001010000000000000515BI0100001263	1	Nos
153	6.33	Number drills H.S.S. (parallel shank)\n	BI01010001010000000000000515BI0100001264	1	Nos
154	6.34	Punch letter set.\n3 mm	BI01010001010000000000000515BI0100001265	1	Nos
155	6.35	Punch number set\n3 mm	BI01010001010000000000000515BI0100001266	1	Nos
156	6.36	Twist drills\n3 mm to 13 mm in step of 0.5 mm\n(parallel shank)	BI01010001010000000000000515BI0100001267	1	Nos
157	6.37	Drill Chuck\n0-13 mm with taper shank	BI01010001010000000000000515BI0100001268	1	Nos
158	6.38	Centre drill\nA 1 to 5	BI01010001010000000000000515BI0100001269	1	Nos
159	6.39	Grinding wheel dresser (diamond	BI01010001010000000000000515BI0100001270	1	Nos
160	6.4	Grinding wheel dresser Huntington type	BI01010001010000000000000515BI0100001271	1	Nos
161	6.41	Clamps C\n100 mm	BI01010001010000000000000515BI0100001272	1	Nos
162	6.42	Clamps C\n200 mm	BI01010001010000000000000515BI0100001273	1	Nos
163	6.43	Tap and Die set in box metric pitch\n(6 mm to 12 mm)	BI01010001010000000000000515BI0100001274	1	Nos
164	6.44	Drill H.S.S. taper shank\n(6 mm to 12 mm in step of 0.5 mm	BI01010001010000000000000515BI0100001275	1	Nos
165	6.45	File Half round\n2nd cut 250 mm	BI01010001010000000000000515BI0100001276	1	Nos
166	6.46	File triangular smooth\n200 mm	BI01010001010000000000000515BI0100001277	1	Nos
167	6.47	Needle file set	BI01010001010000000000000515BI0100001278	1	Nos
168	6.48	File square\n2nd cut 250 mm	BI01010001010000000000000515BI0100001279	1	Nos
169	6.49	Reamer\n6 mm to 25 mm by 1 mm	BI01010001010000000000000515BI0100001280	1	Nos
170	6.5	Reamer adjustable\n10 mm to 15 mm length 75 mm	BI01010001010000000000000515BI0100001281	1	Nos
171	6.51	Tool bits\nH.S.S. 6 mm square	BI01010001010000000000000515BI0100001282	1	Nos
172	6.52	Tool bits\nH.S.S. 10 mm square	BI01010001010000000000000515BI0100001283	1	Nos
173	6.53	Tool bits holder (Armstrong) L.H	BI01010001010000000000000515BI0100001284	1	Nos
174	6.54	Tool bits holder (Armstrong) R.H.	BI01010001010000000000000515BI0100001285	1	Nos
175	6.55	Assorted tools and bit holders for lathe,\nshaper, slotter& planner in different shapes and sizes	BI01010001010000000000000515BI0100001286	1	Nos
176	6.56	Hacksaw frame adjustable 250-300 mm with blades	BI01010001010000000000000515BI0100001287	1	Nos
177	6.57	Table chuck\n75 mm jaw swivel base	BI01010001010000000000000515BI0100001288	1	Nos
178	6.58	Bench vice\n100 mm jaw	BI01010001010000000000000515BI0100001289	1	Nos
179	6.59	Machine vice\n200 mm swivel base	BI01010001010000000000000515BI0100001290	1	Nos
180	6.6	Machine Vice\nSwivel Base -150 mm	BI01010001010000000000000515BI0100001291	1	Nos
181	6.61	Hand vice\n50 mm jaw	BI01010001010000000000000515BI0100001292	1	Nos
182	6.62	Radius turning attachment	BI01010001010000000000000515BI0100001293	1	Nos
183	6.63	Angle turning attachment	BI01010001010000000000000515BI0100001294	1	Nos
184	6.64	Compound angle vice (standard sine)	BI01010001010000000000000515BI0100001295	1	Nos
185	6.65	Universal Machine Vice\n100 mm	BI01010001010000000000000515BI0100001296	1	Nos
186	6.66	Universal Table Angle Plate\n150 X 150 X 150 mm	BI01010001010000000000000515BI0100001297	1	Nos
187	6.67	Shaper tool holder turret type to suit the machine	BI01010001010000000000000515BI0100001298	1	Nos
188	6.68	Base chuck for slotter to suit the\nmachine	BI01010001010000000000000515BI0100001299	1	Nos
189	6.69	Shaper indexing center to suit the\nmachine	BI01010001010000000000000515BI0100001300	1	Nos
190	6.7	Knurling tools\n(set of 3) straight and diamond	BI01010001010000000000000515BI0100001301	1	Nos
191	6.71	Plier cutting\n200 mm\n	BI01010001010000000000000515BI0100001302	1	Nos
192	6.72	Carbide tipped tools of different sizes\nand shapes (throw away tips)	BI01010001010000000000000515BI0100001303	1	Nos
193	6.73	Hand hammer 1 kg With handle	BI01010001010000000000000515BI0100001304	1	Nos
194	6.74	Digital Multimeter\n0 to 500 V	BI01010001010000000000000515BI0100001305	1	Nos
195	6.75	Variable Resistance Box\nResistors With 220?	BI01010001010000000000000515BI0100001306	1	Nos
196	6.76	Variable Resistance Box\nResistors With 150?	BI01010001010000000000000515BI0100001307	1	Nos
197	6.77	Variable Resistance Box\nResistors With 1k?	BI01010001010000000000000515BI0100001308	1	Nos
198	6.78	Variable Resistance Box\nResistors With 33?	BI01010001010000000000000515BI0100001309	1	Nos
199	6.79	Variable Resistance Box\nResistors With 100?	BI01010001010000000000000515BI0100001310	1	Nos
200	6.8	Variable Resistance Box\nResistors With 1.2?	BI01010001010000000000000515BI0100001311	1	Nos
201	6.81	DC Battery With Cap\n9V	BI01010001010000000000000515BI0100001312	1	Nos
202	6.82	Dual Power Supply\n(230V, 50Hz, Fuse-800mA)	BI01010001010000000000000515BI0100001313	1	Nos
203	6.83	Solder Iron\n(350V), Solder Lead, PCB Board\n(Groove Board), Solder Wick	BI01010001010000000000000515BI0100001314	1	Nos
204	6.84	Inductor\n(400 Turns, , I-Core , E-Core, U-\nCore, Laminated Core	BI01010001010000000000000515BI0100001315	1	Nos
205	6.85	Inductor\n(200 Turns, , I-Core , E-Core, U-\nCore, Laminated Core	BI01010001010000000000000515BI0100001316	1	Nos
206	6.86	Inductor\n(600 Turns, , I-Core , E-Core, U-\nCore, Laminated Core	BI01010001010000000000000515BI0100001317	1	Nos
207	6.87	Inductor\n(1200 Turns, , I-Core , E-Core, U-\nCore, Laminated Core	BI01010001010000000000000515BI0100001318	1	Nos
208	6.88	Relay\n(5V) , LED (5V)	BI01010001010000000000000515BI0100001319	1	Nos
209	6.89	Function Generator\n(230V, 50Hz, Watts-12VA, Fuse-\n150mA)	BI01010001010000000000000515BI0100001320	1	Nos
210	6.9	Bread Board	BI01010001010000000000000515BI0100001321	1	Nos
211	6.91	Synchronous Motor\n240V, 60rpm), Capacitor For\nSynchronous Motor (0.8mf ± 5% 450\nVAC)	BI01010001010000000000000515BI0100001322	1	Nos
212	6.92	Power Chord\nConnecting Probes, Single Strand &\nMulti strand Wires	BI01010001010000000000000515BI0100001323	1	Nos
213	6.93	Power Supply\n(0-30V DC, 3A)	BI01010001010000000000000515BI0100001324	1	Nos
214	6.94	SENSOR KIT I. Mounting Plate	BI01010001010000000000000515BI0100001325	1	Nos
215	6.95	II. Power Distribution Box (24V DC, 4A)	BI01010001010000000000000515BI0100001326	1	Nos
216	6.96	III. Counter Box\n(10-30V DC/0.05A)	BI01010001010000000000000515BI0100001327	1	Nos
217	6.97	IV. Indication Box\n(24V Dc)	BI01010001010000000000000515BI0100001328	1	Nos
218	6.98	V. Material Box	BI01010001010000000000000515BI0100001329	1	Nos
219	6.99	VI. Inductive Sensor\n(10-30 V DC, PNP, NO, 5mm (Range))	BI01010001010000000000000515BI0100001330	1	Nos
220	7	VII. Capacitive Sensor\n(10-30 V Dc, PNP, NO, 2-\n8mm(Range)	BI01010001010000000000000515BI0100001331	1	Nos
221	7.01	VIII. Magnetic Sensor\n(10-60 V DC , PNP, NO, 60mm\n(Range))	BI01010001010000000000000515BI0100001332	1	Nos
222	7.02	IX. Ultrasonic Sensor\n(20-30 V DC, PNP, NO, 80-\n300mm(Range))	BI01010001010000000000000515BI0100001333	1	Nos
223	7.03	X. Connecting Wires	BI01010001010000000000000515BI0100001334	1	Nos
224	7.04	XI. Motor With Control Unit\n(24V DC,1A)	BI01010001010000000000000515BI0100001335	1	Nos
225	7.05	Milling Cutter - Cylindrical Cutter\nØ 63 mm, 90 mm Length and 27 mm\nBore Diameter	BI01010001010000000000000515BI0100001336	1	Nos
226	7.06	Milling Cutter - Cylindrical Cutter\nØ 80 mm, 90 mm Length and 27 mm\nBore Diameter	BI01010001010000000000000515BI0100001337	1	Nos
227	7.07	Milling Cutter\nSide and face cutter dia 100 X 10 X\n27 mm	BI01010001010000000000000515BI0100001338	1	Nos
228	7.08	Milling Cutter\nSide and face cutter dia 100 X 12 X\n27 mm	BI01010001010000000000000515BI0100001339	1	Nos
229	7.09	Milling Cutter\nSide and face cutter dia 160 X 10 X\n27 mm	BI01010001010000000000000515BI0100001340	1	Nos
230	7.1	Milling Cutter\nSide and face cutter dia 160 X 16 X\n27 mm	BI01010001010000000000000515BI0100001341	1	Nos
231	7.11	Milling Cutter - Side and face cutter\ndia 200 X 20 X 27 mm	BI01010001010000000000000515BI0100001342	1	Nos
232	7.12	Milling Cutter - Side and face cutter\ndia 80 X 8 X 27 mm	BI01010001010000000000000515BI0100001343	1	Nos
233	7.13	Milling Cutter - Equal Angle Cutter\n45°/100 mm x 27 mm bore dia	BI01010001010000000000000515BI0100001344	1	Nos
234	7.14	Milling Cutter - Equal Angle Cutter\n60°/100 mm x 27 mm bore dia	BI01010001010000000000000515BI0100001345	1	Nos
235	7.15	Milling Cutter - Equal Angle Cutter\n90°/100 mm 27 mm bore dia	BI01010001010000000000000515BI0100001346	1	Nos
236	7.16	Milling Cutter - Double Angle Unequal\nCutter 50 X 12 X 27 mm bore dia55°\n	BI01010001010000000000000515BI0100001347	1	Nos
237	7.17	Milling Cutter - Double Angle Unequal\nCutter 50 X 12 X 27 mm bore dia 60	BI01010001010000000000000515BI0100001348	1	Nos
238	7.18	Milling Cutter - Double Angle Unequal\nCutter 63 X 18 X 27 mm bore dia 70	BI01010001010000000000000515BI0100001349	1	Nos
239	7.19	Milling Cutter - Double Angle Unequal\nCutter 63 X 18 X 27 mm bore dia 75°	BI01010001010000000000000515BI0100001350	1	Nos
240	7.2	Milling Cutter - Single Angle Cutter 63 x 18 x 45° RH 27 mm bore\ndia	BI01010001010000000000000515BI0100001351	1	Nos
241	7.21	Milling Cutter - Single Angle Cutter Cutter 63 x 18 x 45°LH 27 mm bore\ndia	BI01010001010000000000000515BI0100001352	1	Nos
242	7.22	Milling Cutter - Single Angle\nCutter 63 x 18 x 60° LH 27 mm bore\ndia	BI01010001010000000000000515BI0100001353	1	Nos
243	7.23	Milling Cutter - Single Angle\nCutter 63 x 18 x 60°RH 27 mm bore\ndia	BI01010001010000000000000515BI0100001354	1	Nos
244	7.24	Milling Cutter - Slitting Saw Cutter\nØ 75 x 3 X Ø 27 mm	BI01010001010000000000000515BI0100001355	1	Nos
245	7.25	Milling Cutter - Slitting Saw Cutter\nØ 100 x 6 X Ø 27 mm	BI01010001010000000000000515BI0100001356	1	Nos
246	7.26	Milling Cutter - Shell End Mill\nØ 50 x 36 x 27 mm, Preferably\nInserted Tip Type	BI01010001010000000000000515BI0100001357	1	Nos
247	7.27	Milling Cutter - Shell End Mill\nØ 75 mm x 50 x 27 mm, Preferably\nInserted Tip Type	BI01010001010000000000000515BI0100001358	1	Nos
248	7.28	Ø 6, Ø 10 and Ø 16 are (double\nfluted), Ø 20 mm & Ø 25mm (four fluted)Milling Cutter - Parallel Shank end mills\n	BI01010001010000000000000515BI0100001359	1	Nos
249	7.29	Ø 17.5 x 8 mm Width x Diameter of shank 8 mm\nMilling Cutter - T Slot Cutter with\nParallel Shank	BI01010001010000000000000515BI0100001360	1	Nos
250	7.3	Milling Cutter - Concave\nØ 63 x 6 radius x 27 mm Bore\nDiameter	BI01010001010000000000000515BI0100001361	1	Nos
251	7.31	Ø 63 x 6 radius x 27 mm Bore\nDiameterMilling Cutter - Convex	BI01010001010000000000000515BI0100001362	1	Nos
252	7.32	Milling Cutter - Disc type form (involutes form - 2 module, 20°\npressure angle)	BI01010001010000000000000515BI0100001363	1	Nos
253	7.33	Direct reading vernier caliper\n0- 300 (direct reading with dial	BI01010001010000000000000515BI0100001364	1	Nos
254	7.34	Digital vernier caliper\n0- 300 mm	BI01010001010000000000000515BI0100001365	1	Nos
255	7.35	Vernier height gauge q\n250 mm\n	BI01010001010000000000000515BI0100001366	1	Nos
256	7.36	Vernier gear tooth caliper	BI01010001010000000000000515BI0100001367	1	Nos
257	7.37	Vernier bevel protractor\nwith 150 m blade	BI01010001010000000000000515BI0100001368	1	Nos
258	7.38	Combination set\nwith 300 mm rule\n	BI01010001010000000000000515BI0100001369	1	Nos
259	7.39	Bevel gauge\n200 mm	BI01010001010000000000000515BI0100001370	1	Nos
260	7.4	Telescopic Gauge\n8 mm to 150 mm	BI01010001010000000000000515BI0100001371	1	Nos
261	7.41	Sine Bar\n200 mm	BI01010001010000000000000515BI0100001372	1	Nos
262	7.42	Universal Dial Test Indicator\nPlunger Type - Range 0 - 10 mm,\nGraduation 0.01 mm complete with Clamping Devices and Magnetic Stand	BI01010001010000000000000515BI0100001373	1	Nos
263	7.43	Centre Gauge com.\n60°,\n	BI01010001010000000000000515BI0100001374	1	Nos
264	7.44	Centre Gauge com.\n55°\n	BI01010001010000000000000515BI0100001375	1	Nos
265	7.45	Centre Gauge com.\n 29°\n	BI01010001010000000000000515BI0100001376	1	Nos
266	7.46	Gauge Slip Box\nMetric - 87 Pieces Set	BI01010001010000000000000515BI0100001377	1	Nos
267	7.47	Gauge Screw Pitch\nMetric -0.25 to 6 mm	BI01010001010000000000000515BI0100001378	1	Nos
268	7.48	Gauge - Radius Set\n1 mm to 25 mm by 0.5 mm	BI01010001010000000000000515BI0100001379	1	Nos
269	7.49	Limit plug gauges\n5 mm to 25 mm by 2.5 mm	BI01010001010000000000000515BI0100001380	1	Nos
270	7.5	Ring gauges\n5 mm to 25 m by 2.5 mm (GO & NO\nGO)	BI01010001010000000000000515BI0100001381	1	Nos
271	7.51	Taper gauge M.T. No. 1, 2, 3, 4 & 5\n	BI01010001010000000000000515BI0100001382	1	Nos
272	7.52	Gauge Feeler / Thickness\n0.05 mm to 0.3 mm by 0.05 and 0.4\nmm to 1 mm by 0.1 mm - 13 leaves	BI01010001010000000000000515BI0100001383	1	Nos
273	7.53	Safety Glass	BI01010001010000000000000515BI0100001384	1	Nos
274	7.54	Planer gauge standard size	BI01010001010000000000000515BI0100001385	1	Nos
275	7.55	Magnifying glass\n75 mm	BI01010001010000000000000515BI0100001386	1	Nos
276	8	TRADE-DIESEL MACHANIC	BI01010001010000000000000515BI0100001387
277	8.01	Electrician Screw Driver\n250mm	BI01010001010000000000000515BI0100001388	1	Nos
278	8.02	Screw driver Blade\n30 cm. x 9 mm.\n\n	BI01010001010000000000000515BI0100001389	1	Nos
279	8.03	Blow Lamp\n1 litre	BI01010001010000000000000515BI0100001390	1	Nos
280	8.04	Chain Pulley Block capacity with tripod\nstand3 ton	BI01010001010000000000000515BI0100001391	1	Nos
281	8.05	Chisel flat\n10 cm	BI01010001010000000000000515BI0100001392	1	Nos
282	8.06	Chisels cross cut\n200 mm x 6mm	BI01010001010000000000000515BI0100001393	1	Nos
283	8.07	Circlip pliers Expanding and contracting 15cm and 20cm	BI01010001010000000000000515BI0100001394	1	Nos
284	8.08	Dividers with Spring\n15 cm	BI01010001010000000000000515BI0100001395	1	Nos
285	8.09	Drift Punch Copper\n15 Cm	BI01010001010000000000000515BI0100001396	1	Nos
286	8.1	Drill point angle gauge	BI01010001010000000000000515BI0100001397	1	Nos
287	8.11	Drill twist (various sizes)\n1.5 mm to 15 mm by\n0.5mm	BI01010001010000000000000515BI0100001398	1	Nos
288	8.12	Engineers stethoscope	BI01010001010000000000000515BI0100001399	1	Nos
289	8.13	Files assorted sizes and types including safe\nedge file (20 Nos)	BI01010001010000000000000515BI0100001400	1	Nos
290	8.14	Gloves for Welding\nLeather and Asbestos\n\n	BI01010001010000000000000515BI0100001401	1	Nos
291	8.15	Glow plug tester	BI01010001010000000000000515BI0100001402	1	Nos
292	8.16	Growler	BI01010001010000000000000515BI0100001403	1	Nos
293	8.17	Hammer Chipping\n0.25 Kg	BI01010001010000000000000515BI0100001404	1	Nos
294	8.18	Hammer copper with handle\n1 Kg	BI01010001010000000000000515BI0100001405	1	Nos
295	8.19	Hand reamers adjustable\n10.5 to 11.25 mm,	BI01010001010000000000000515BI0100001406	1	Nos
296	8.2	Hand reamers adjustable 11.25 to\n12.75 mm,	BI01010001010000000000000515BI0100001407	1	Nos
297	8.21	Hand reamers adjustable\n12.75 to 14.25 mm \n	BI01010001010000000000000515BI0100001408	1	Nos
298	8.22	Hand reamers adjustable\n14.25 to 15.75 mm	BI01010001010000000000000515BI0100001409	1	Nos
299	8.23	Hand Shear Universal\n250mm	BI01010001010000000000000515BI0100001410	1	Nos
300	8.24	Insulated Screw driver\n30 cm x 9mm blade	BI01010001010000000000000515BI0100001411	1	Nos
301	8.25	Left cut snips\n250mm	BI01010001010000000000000515BI0100001412	1	Nos
302	8.26	Magnifying glass\n75mm	BI01010001010000000000000515BI0100001413	1	Nos
303	8.27	Marking out table\n90 x 60 x 90 cm.	BI01010001010000000000000515BI0100001414	1	Nos
304	8.28	Oil Stone\n15 cm x 5 cm x 2.5 cm	BI01010001010000000000000515BI0100001415	1	Nos
305	8.29	Prick Punch\n15 cm\n	BI01010001010000000000000515BI0100001416	1	Nos
306	8.3	Punch Letter 4mm (Number)\n	BI01010001010000000000000515BI0100001417	1	Nos
307	8.31	Right cut snips\n250mm\n	BI01010001010000000000000515BI0100001418	1	Nos
308	8.32	Rivet sets snap and Dolly combined\n3mm\n	BI01010001010000000000000515BI0100001419	1	Nos
309	8.33	Rivet sets snap and Dolly combined\n4mm\n	BI01010001010000000000000515BI0100001420	1	Nos
310	8.34	Rivet sets snap and Dolly combined\n6mm\n	BI01010001010000000000000515BI0100001421	1	Nos
311	8.35	Scraper flat\n25 cm	BI01010001010000000000000515BI0100001422	1	Nos
312	8.36	Scraper half round\n25 cm	BI01010001010000000000000515BI0100001423	1	Nos
313	8.37	Scraper Triangular\n25 cm	BI01010001010000000000000515BI0100001424	1	Nos
314	8.38	Scriber\n15 cm	BI01010001010000000000000515BI0100001425	1	Nos
315	8.39	Tinnman’s Shear\n450 mm x 600mm	BI01010001010000000000000515BI0100001426	1	Nos
316	8.4	Soldering Copper\nHatchet type 500gms	BI01010001010000000000000515BI0100001427	1	Nos
317	8.41	Solid Parallels in pairs (Different size) in\nMetric	BI01010001010000000000000515BI0100001428	1	Nos
318	8.42	Spanner Clyburn\n15 cm\n	BI01010001010000000000000515BI0100001429	1	Nos
319	8.43	Spanner D.E. set of 12 pieces\n6mm to 32mm	BI01010001010000000000000515BI0100001430	1	Nos
320	8.44	Spanner T. flocks for screwing up and up- screwing inaccessible\n	BI01010001010000000000000515BI0100001431	1	Nos
321	8.45	Spanners socket with speed handle, T-bar,\nratchet and universal	BI01010001010000000000000515BI0100001432	1	Nos
322	8.46	Spark lighter	BI01010001010000000000000515BI0100001433	1	Nos
323	8.47	Straight edge gauge 4 ft.	BI01010001010000000000000515BI0100001434	1	Nos
324	8.48	Stud extractor set of 3	BI01010001010000000000000515BI0100001435	1	Nos
325	8.49	Taps and Dies complete sets (5 types)	BI01010001010000000000000515BI0100001436	1	Nos
326	8.5	Taps and wrenches - Metric	BI01010001010000000000000515BI0100001437	1	Nos
327	8.51	Telescope gauge\n	BI01010001010000000000000515BI0100001438	1	Nos
328	8.52	Temperature gauge with sensor\n0-100 0C	BI01010001010000000000000515BI0100001439	1	Nos
329	8.53	Trammel\n30 cm	BI01010001010000000000000515BI0100001440	1	Nos
330	8.54	V’ Block 75 x 38 mm pair with Clamps	BI01010001010000000000000515BI0100001441	1	Nos
331	8.55	Air conditioned CRDI Vehicle in running\ncondition -LMV	BI01010001010000000000000515BI0100001442	1	Nos
332	8.56	Gas Welding Table\n1220mm x760mm	BI01010001010000000000000515BI0100001443	1	Nos
333	8.57	Heavy Commercial vehicle type (without\nbody on frame)	BI01010001010000000000000515BI0100001444	1	Nos
334	8.58	Liquid penetrate Inspection kit	BI01010001010000000000000515BI0100001445	1	Nos
335	8.59	Tin smiths bench folder\n600 x 1.6mm\n\n	BI01010001010000000000000515BI0100001446	1	Nos
336	8.6	Welding Transformer\n150-300 Amps	BI01010001010000000000000515BI0100001447	1	Nos
337	8.61	Arbor press hand operated 2 ton capacity	BI01010001010000000000000515BI0100001448	1	Nos
338	8.62	Automotive exhaust 5 gas analyser\n(petrol & Diesel) or Diesel Smokemeter\n	BI01010001010000000000000515BI0100001449	1	Nos
339	8.63	Bench lever shears	BI01010001010000000000000515BI0100001450	1	Nos
340	8.64	Multi Scan Tool with oscilloscope	BI01010001010000000000000515BI0100001451	1	Nos
341	8.65	Pipe Bending Machine (Hydraulic type\n12mm to 30mm	BI01010001010000000000000515BI0100001452	1	Nos
342	8.66	Pneumatic rivet gun with standard\naccessories	BI01010001010000000000000515BI0100001453	1	Nos
343	8.67	Tin smiths bench folder\n600 x 1.6mm\n	BI01010001010000000000000515BI0100001454	1	Nos
344	8.68	Welding plant Oxy-Acetylene complete (\nhigh pressure)\n\n	BI01010001010000000000000515BI0100001455	1	Nos
345	8.69	Welding Transformer\n150-300 Amps	BI01010001010000000000000515BI0100001456	1	Nos
346	9	TRADE- REFRIGERATION AND AIR CONDITIONING TECHNICIAN	BI01010001010000000000000515BI0100001457
347	9.01	Quick couples, process tube\nadopter¼”	BI01010001010000000000000515BI0100001458	1	Nos
348	9.02	Quick couples, process tube\nadopter3/8”\n\n	BI01010001010000000000000515BI0100001459	1	Nos
349	9.03	Tong Close mouth and pick	BI01010001010000000000000515BI0100001460	1	Nos
350	9.04	Bending spring external type,\nfor copper tube3mm to 16mm DIA	BI01010001010000000000000515BI0100001461	1	Nos
351	9.05	Capillary plug gauge	BI01010001010000000000000515BI0100001462	1	Nos
352	9.06	(Hollo) Punch hole for cutting\ngasket4.7-16mm die	BI01010001010000000000000515BI0100001463	1	Nos
353	9.07	T-Allen key set\nsize 5/32" to 1/8"	BI01010001010000000000000515BI0100001464	1	Nos
354	9.08	Tap set with matching drills\n3 mm to 16mm	BI01010001010000000000000515BI0100001465	1	Nos
355	9.09	Plumbing hammer weight\n200 gm\n	BI01010001010000000000000515BI0100001466	1	Nos
356	9.1	Torque Wrench\n300mm-12.7mm	BI01010001010000000000000515BI0100001467	1	Nos
357	9.11	Piercing Valve\n¼ Inch	BI01010001010000000000000515BI0100001468	1	Nos
358	9.12	Four way reversible valve	BI01010001010000000000000515BI0100001469	1	Nos
359	9.13	Service Oscillator	BI01010001010000000000000515BI0100001470	1	Nos
360	9.14	C.R.O Single beam\n5 MHZ\n	BI01010001010000000000000515BI0100001471	1	Nos
361	9.15	C.R.O Dual trace/ Double beam\n60 MHZ	BI01010001010000000000000515BI0100001472	1	Nos
362	9.16	A.F.O Oscillators	BI01010001010000000000000515BI0100001473	1	Nos
363	9.17	Electronic leak detector	BI01010001010000000000000515BI0100001474	1	Nos
364	9.18	Sling psychrometer mounted on aluminum back,\nscale -100 C to +1100 C	BI01010001010000000000000515BI0100001475	1	Nos
365	9.19	Oxy-acetylene welding set\ncompletecylinders, regulators welding\ntorches with difference nozzles	BI01010001010000000000000515BI0100001476	1	Nos
366	9.2	Single door direct cool\nrefrigerator, carrying with HFC\nand HC185 L\n	BI01010001010000000000000515BI0100001477	1	Nos
367	9.21	Frost free refrigerator\n200L carrying with HC blend\n\n	BI01010001010000000000000515BI0100001478	1	Nos
368	9.22	Three/four door refrigerator (\nInverter type)300L carrying with HC R-600a	BI01010001010000000000000515BI0100001479	1	Nos
369	9.23	Core drill machine	BI01010001010000000000000515BI0100001480	1	Nos
370	9.24	Bench Drilling machine\n20 mm capacity,200-2500rpm	BI01010001010000000000000515BI0100001481	1	Nos
371	9.25	Grinding Machine\n200mm,3000rpm,Double ended1/2\nhp	BI01010001010000000000000515BI0100001482	1	Nos
372	9.26	Evacuating and refrigerant charging station, consist of\na) Rotary two stage vacuum pump and motor (with gas ballast and anti-such back)\nb) manifold with gauges and\nvalves and capable of pulling\nvacuum up to 50 microns of Hg\nand with provision of connecting\nto a microns level vacuum gauge\nb) Graduated charging cylinder\nwith provision for temperature\ncorrection and all necessary\nisolating valves(CAP. 2 kg. In lieu of (b)above and\nwith accuracyof + / - g for charging hydrocarbons	BI01010001010000000000000515BI0100001483	1	Nos
373	9.27	Evacuating and charging station\nas above but fitted with weighing scale	BI01010001010000000000000515BI0100001484	1	Nos
374	9.28	Two stage rotary vacuum pump,3or 4 CFM\ncapacity approx. 60 - 10rmp capable of evacuating to 50 microns of Hg and fitted with gas ballast anti-such back valve and single-\nphase motor\n\n	BI01010001010000000000000515BI0100001485	1	Nos
375	9.29	Dry N2 cylinder\n2 stage regulator or commercial N2 in cylinder with drier unit and 2 stage regulator & meter cube\n\n	BI01010001010000000000000515BI0100001486	1	Nos
376	9.3	Window A.C\n1 Ton with R-22 Blend reciprocating compressor\n	BI01010001010000000000000515BI0100001487	1	Nos
377	9.31	Split A.C\n1.5 Ton with R134a or R-22 reciprocating compressor\n\n	BI01010001010000000000000515BI0100001488	1	Nos
378	9.32	Duct able split A.C 1.5 ton\n1.5 Ton with R134a or R-22 reciprocating compressor\n\n	BI01010001010000000000000515BI0100001489	1	Nos
379	9.33	Recovery unit with cylinders\nCFC, HFC&HCFC\n	BI01010001010000000000000515BI0100001490	1	Nos
380	9.34	Decibel meter\n30-100 db\n	BI01010001010000000000000515BI0100001491	1	Nos
381	9.35	Cassette Air conditioner\n4500 kcal/hr	BI01010001010000000000000515BI0100001492	1	Nos
382	9.36	De scaling pump set\nwith stainless steel impeller and housing complete with motor 1/2 hp and accessories	BI01010001010000000000000515BI0100001493	1	Nos
383	9.37	Fan coil unit\nwith water valves (2 & 3 way)	BI01010001010000000000000515BI0100001494	1	Nos
384	9.38	Shell and tube, DX chillers\n(small)5 Ton with Cu tubing only\n	BI01010001010000000000000515BI0100001495	1	Nos
385	9.39	Circulating water pump (small\n0.5 H.P with stainless steel tank capacity 20 liters within let/ outlet provision.	BI01010001010000000000000515BI0100001496	1	Nos
386	9.4	Refrigerant Cylinder\n10 kg capacity	BI01010001010000000000000515BI0100001497	1	Nos
387	9.41	Gauge manifold with gauges\nDifferent size of hoses for R\n134a,R22 and R 410.	BI01010001010000000000000515BI0100001498	1	Nos
388	9.42	Shell and tube type condenser\n5 Ton	BI01010001010000000000000515BI0100001499	1	Nos
389	9.43	Rotary hermetic compressor\n2 Ton	BI01010001010000000000000515BI0100001500	1	Nos
390	9.44	Bottle cooler visible\n200 L carrying with HFC-134a&\nreciprocating compressor	BI01010001010000000000000515BI0100001501	1	Nos
391	9.45	Deep freezer\n200 L carrying with HFC-134a&\nreciprocating compressor	BI01010001010000000000000515BI0100001502	1	Nos
392	9.46	Display Cabinet\n2 ton capacity	BI01010001010000000000000515BI0100001503	1	Nos
393	9.47	Water cooler storage type\n200 L carrying with HFC-134a&\nreciprocating compressor	BI01010001010000000000000515BI0100001504	1	Nos
394	9.48	Water dispenser bubble type\n(Hot and Cold2.5 to 3ltr. Delivery capacity per hour\n	BI01010001010000000000000515BI0100001505	1	Nos
395	9.49	Ice candy plant\n2 ton with capacity to make 32 ice candy at a time with Forma tray, stainless steel tank on trolley\n	BI01010001010000000000000515BI0100001506	1	Nos
396	9.5	Air-conditioning, direct system\nComplete with all controls including humidity control\n	BI01010001010000000000000515BI0100001507	1	Nos
397	9.51	Air-conditioning, indirect system. (water cooled )\nComplete with all controls including humidity control\n	BI01010001010000000000000515BI0100001508	1	Nos
398	9.52	Package A/C\n5-ton capacity, Air cooled type with open type compressor reciprocating type\n	BI01010001010000000000000515BI0100001509	1	Nos
399	9.53	Car A.C components (full kit)\na) Wobble plate compressor with mounting brackets.\nb) Serpentine Evaporator c) Parallel Flow Condenser\nd) Hoses, tubes, Receiver, Ex.valve.\ne) Electrical components &\nwiring Harness	BI01010001010000000000000515BI0100001510	1	Nos
400	9.54	CAR AC tutorial model	BI01010001010000000000000515BI0100001511	1	Nos
401	9.55	Bus AC tutorial model	BI01010001010000000000000515BI0100001512	1	Nos
402	9.56	Automatic ice cube m/c\n50 kg/hour	BI01010001010000000000000515BI0100001513	1	Nos
403	9.57	Storage type water cooler (hot and cold)	BI01010001010000000000000515BI0100001514	1	Nos
404	9.58	Visi cooler\n185 L	BI01010001010000000000000515BI0100001515	1	Nos
405	9.59	VRF/VRV unit with two indoor units 2.5TR each and 5TR capacity out door unit complete with air cooled condenser, accessories and controls.\n\n	BI01010001010000000000000515BI0100001516	1	Nos
406	9.6	Split A/C (inverter technology)\n1.5 TR\n	BI01010001010000000000000515BI0100001517	1	Nos
407	9.61	Walk in cooler PUF insulated for cold room 6X4.5X8 cft.\ntemperature 00-50 c\n\n	BI01010001010000000000000515BI0100001518	1	Nos
408	9.62	Absorption system\nSmall size\n\n	BI01010001010000000000000515BI0100001519	1	Nos