Employees State Insurance Corporation-ESIC has published Special Repairs To Flooring, Fencing, Repairs To Service Lines, Painting, Providing Ramp, Approach Path Etc. To Esi Dispensary At Anchal Attached To Esic Hospital, Ezhukone, Kollam. Submission Date for this Tender is 12-04-2021. Road Work Tenders in ESI Dispensary Anchal, Ezhukone, Kollam Kerala. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Apr-2021 | Extension of Date | Date | 12-04-2021 |
| Name of Work: Special Repairs to flooring, fencing, repairs to service lines, painting, providing ramp, approach path etc. to ESI Dispensary at Anchal attached to ESIC Hospital, Ezhukone, Kollam. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | Item 001 | ||
| 2 | 1.1 | All kinds of soil. | Item 002 | 1 | cum |
| 3 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Item 003 | 0.5 | cum |
| 4 | 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Item 004 | 2400 | sqm |
| 5 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | Item 005 | ||
| 6 | 4.1 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). | Item 006 | 0.5 | cum |
| 7 | 4.2 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources). | Item 007 | 5 | cum |
| 8 | 5 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | Item 008 | 0.65 | cum |
| 9 | 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. | Item 009 | ||
| 10 | 6.1 | Cold twisted bars | Item 010 | 50 | kg |
| 11 | 7 | Providing and fixing sheet covering over expansion joints with iron screws as per design. | Item 011 | ||
| 12 | 7.1 | Aluminium fluted strips 3.15 mm thick.: 150 mm wide | Item 013 | 7 | metre |
| 13 | 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: | Item 014 | ||
| 14 | 8.1 | Cement mortar 1:4 (1 cement : 4 coarse sand) | Item 015 | 0.5 | cum |
| 15 | 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | Item 016 | ||
| 16 | 9.1 | Cement mortar 1:6 (1 cement : 6 coarse sand) | Item 017 | 1 | cum |
| 17 | 10 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | Item 018 | ||
| 18 | 10.1 | Marble work | Item 019 | 56 | metre |
| 19 | 11 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Item 020 | 40 | kg |
| 20 | 12 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). | Item 021 | ||
| 21 | 12.1 | Dark shade pigment using ordinary cement | Item 022 | 4 | sqm |
| 22 | 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | Item 023 | ||
| 23 | 13.1 | Size of Tile 600x600 mm | Item 024 | 195 | sqm |
| 24 | 14 | 12 mm cement plaster of mix : | Item 025 | ||
| 25 | 14.1 | 1:4 (1 cement: 4 coarse sand) | Item 026 | 23 | sqm |
| 26 | 15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : | Item 027 | ||
| 27 | 15.1 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Item 028 | 1100 | sqm |
| 28 | 16 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives including cleaning/scraping the old surface with jet washing etc. complete as per direction of engineer in charge. | Item 029 | ||
| 29 | 16.1 | Old work (Two or more coats applied @ 1.10 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.70 litre/10 sqm | Item 030 | 2100 | sqm |
| 30 | 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : | Item 031 | ||
| 31 | 17.1 | One or more coats on old work | Item 032 | 325 | sqm |
| 32 | 18 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. | Item 033 | ||
| 33 | 18.1 | With cement mortar 1:4 (1cement: 4 coarse sand) | Item 034 | 20 | sqm |
| 34 | 19 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: | Item 035 | ||
| 35 | 19.1 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | Item 036 | 2 | sqm |
| 36 | 20 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. | Item 037 | 5 | each |
| 37 | 21 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. | Item 038 | 3 | each |
| 38 | 22 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | Item 039 | ||
| 39 | 22.1 | In cement mortar | Item 040 | 1 | cum |
| 40 | 23 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. | Item 041 | 30 | kg |
| 41 | 24 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Item 042 | 12 | sqm |
| 42 | 25 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | Item 043 | 2 | cum |
| 43 | 26 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. | Item 044 | ||
| 44 | 26.1 | With G.I. barbed wire | Item 045 | 825 | metre |
| 45 | 27 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Item 046 | 60 | sqm |
| 46 | 28 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : | Item 047 | ||
| 47 | 28.1 | W.C. pan with ISI marked white solid plastic seat and lid | Item 048 | 1 | each |
| 48 | 29 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. | Item 049 | ||
| 49 | 29.1 | 10 litre capacity - White | Item 050 | 1 | each |
| 50 | 30 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. | Item 051 | ||
| 51 | 30.1 | Flexible pipe : 32 mm dia | Item 052 | 2 | each |
| 52 | 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. | Item 053 | ||
| 53 | 31.1 | 20 mm nominal dia Pipes | Item 054 | 20 | metre |
| 54 | 31.2 | 25 mm nominal dia Pipes | Item 055 | 10 | metre |
| 55 | 32 | Providing and fixing uplasticised PVC connection pipe with brass unions : | Item 056 | ||
| 56 | 32.1 | 45 cm length :15 mm nominal bore | Item 057 | 2 | each |
| 57 | 33 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : | Item 058 | ||
| 58 | 33.1 | 15 mm nominal bore | Item 059 | 3 | each |
| 59 | 34 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 | Item 060 | ||
| 60 | 34.1 | 15mm nominal bore | Item 061 | 2 | each |
| 61 | 35 | Providing and fixing PTMT pillar cock of approved quality and colour. | Item 062 | ||
| 62 | 35.1 | 15 mm nominal bore, 107 mm long, weighing not less than 110 gms | Item 063 | 1 | each |
| 63 | 36 | Providing and fixing PTMT grating of approved quality and colour. | Item 064 | ||
| 64 | 36.1 | Circular type : 100 mm nominal dia | Item 065 | 3 | each |
| 65 | 37 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of P.V.C. pipes including bed concrete as per standard design : | Item 066 | ||
| 66 | 37.1 | 100 mm diameter P.V.C. pipe | Item 067 | 7.2 | metre |
| 67 | 38 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : | Item 068 | ||
| 68 | 38.1 | 100 mm diameter | Item 069 | 8 | metre |
| 69 | 39 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. | Item 070 | ||
| 70 | 39.1 | 12 mm average thickness. | Item 071 | 18 | sqm |
| 71 | 40 | Providing and fixing in position 12mm thick bitumen impregnated per cm fiber board conforming to IS: 1838, including cost of primer, sealing depth per compound Grade-A in expansion joints. | Item 072 | 1.61 | Per cm depth per 100 m |
| 72 | 41 | Cleaning of chocked sewer line by opening manhole cover and cleaning with rod or machine for 100 mm dia and above. | Item 073 | 20 | Rm |
| 73 | 42 | Cleaning and polishing the existing terrazo floors with grinding machine fitted with fine dressing stone/ gunny bags and finally cleaning the floor with oxalic acid etc. complete as directed by the engineer in charge. | Item 074 | 200 | Sq.m |
| 74 | 43 | Cleaning/ grinding/ polishing with fine dressing stone terrazo dado manually and claening with oxalic acid etc completee as dircted by the Engineer in charge. | Item 075 | 5 | Sq.m |
| 75 | 44 | Providing, laying and jointing 110 mm dia 6kg/cm2 (Highcount or equivalent PVC) sewer/ drainage line with cement solvent including tesing the joint etc complete as per eng-in charge | Item 076 | 8 | Rm |
| 76 | 45 | Cleaning and removing the particles with blower, from cracks already developed on roof surfaces/terraces, by cutting and grooving mannually to V shape, throughly. After cleaning the V groves thoroughly using wire brush and filling with NITOSEAL PU 40 or equivalent in the groves formed. Applying Nitobond SBR latex or equivalent 1 Litre/3 Kg grey cement after allowing the treated surface to dry for four hours. Mixing of the chemical with cement shall be as per the manufacturer's specifications etc. complete all as per the directions of the Engr in Charge. | Item 077 | 25 | Metre |
| 77 | 46 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. | Item 078 | ||
| 78 | 46.1 | Bars upto 12 mm diameter | Item 079 | 20 | Metre |
| 79 | 47 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge | Item 080 | ||
| 80 | 47.1 | 25 mm average thickness | Item 081 | 100 | Sqm |
| 81 | 48 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. | Item 082 | ||
| 82 | 48.1 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer | Item 083 | 450 | Sqm |
| 83 | 49 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. \nNote: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). | Item 084 | ||
| 84 | 49.1 | 12 mm average thickness. | Item 085 | 450 | Sqm |
| 85 | 50 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. | Item 086 | ||
| 86 | 50.1 | For vertical surface two coats @ 0.70 kg per sqm | Item 087 | 30 | Sqm |
| 87 | 50.2 | For horizontal surface one coat @1.10 kg per sqm. | Item 088 | 450 | Sqm |
| 88 | 51 | Neat cement flushing coat over the plastered surfaces using integral water proofing compound as per the manufacturers descriptions. | Item 089 | 450 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
