Employees State Insurance Corporation-ESIC has published Special Electrical Works In Esi Hospital At Thottada Kannur Special Electrical Works And Replacement Of Medium Voltage Power Distribution Panel Board In Esi Hospital At Thottada Kannur. Submission Date for this Tender is 30-03-2021. Electrical Maintenance Tenders in Thottada, Kannur Kerala. Bidders can get complete Tender details and download the document.
Name of Work:-Special Electrical works & Replacement of Medium Voltage Power distribution Panel Board in ESI Hospital at Thottada, Kannur | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Supply ,Installation, testing & commissioning (including minor Civil Works) of cubicle type Indoor Panel suitable for 415V, 3 phase, 4 wire 50 Hz AC supply system fabricated in compartmentalised design from CRCA Sheet steel of 2mm thick for frame work with size of 155cm x 30cm x 185 cm and covers i/c cleaning and finishing complete with powder coating in approved shade with dust and vermin proof, having 400 amps capacity TPN tinned aluminium bus bar of high conductivity, DMC/SMC bus bar supports, control wiring with 2.5 sq.mm. FRLS PVC Insulated copper conductor single core cable, cable alleys, cable gland plates in half, MV danger notice board i/c providing following switch gears complete as per the directions of engineer-in charge. | |||
2 | 1.01 | INCOMING | |||
3 | 1.02 | a) 250 Amps, 36KA 415 Volts,50Hz, 4 pole MCCB with thermal-magnetic based releases for over load & short circuit, extended rotary handle etc. – 1 No. | |||
4 | 1.03 | b) RYB Phase indicating LED lamps with 6ASP MCB protection, Digital VAF meters,CT's- 1 Set. | |||
5 | 1.04 | BUS BARS | |||
6 | 1.05 | TPN Aluminium bus bars of 400 Amps capacity with heat shrinkable coloured sleeves, DMC /SMC bus bar supports at required intervals complete for cross section, size supports and their spacing etc. as per the directions of engineer-in charge. | |||
7 | 1.06 | OUTGOINGS | |||
8 | 1.07 | a) 125 Amps, 36KA 415 Volts, 50Hz, 4 pole MCCB with thermal-magnetic based release for over load & short circuit release, extended rotary handle etc. – 1 No, | |||
9 | 1.08 | b) 100 Amps, 30KA 415 Volts, 50Hz, 4 pole MCCB with thermal-magnetic based release for over load & short circuit release, extended rotary handle etc. – 1 No. | |||
10 | 1.09 | c) 63 Amps, 30KA 415 Volts, 50Hz, 4 pole MCCB with thermal-magnetic based release for over load & short circuit release, extended rotary handle etc. – 9 Nos. | |||
11 | 1.1 | Panel complete as above | Item 001 | 1 | Each |
12 | 2 | Supplying and fixing of 4 way (4 + 12), Double door , Vertical type three pole and neutral, sheet steel, MCCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCCB/MCB/Isolator) | Item 002 | 2 | Each |
13 | 3 | Supplying and fixing of 8 way (4 + 24), Double door , Vertical type three pole and neutral, sheet steel, MCCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCCB/MCB/Isolator) | Item 003 | 1 | Each |
14 | 4 | Supplying and fixing of 63A 4 pole MCCB 16 KA Incomer complete all as specified and as per the directions of engineer-in charge. | Item 004 | 2 | Each |
15 | 5 | Supplying and fixing of 100A 4 pole MCCB 16 KA Incomer complete all as specified and as per the directions of engineer-in charge. | Item 005 | 1 | Each |
16 | 6 | Supplying and fixing of 35 sqmmx3.5 core PVC insulated and PVC sheathed XLPE power Aluminium armoured cable of 1.1 KV grade | Item 006 | 45 | Metre |
17 | 7 | Supplying and fixing of 50 sqmmx3.5 core PVC insulated and PVC sheathed XLPE power Aluminium armoured cable of 1.1 KV grade | Item 007 | 30 | Metre |
18 | 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
19 | 8.1 | Single pole | Item 008 | 15 | Each |
20 | 8.2 | Triple pole and neutral | Item 009 | 9 | Each |
21 | 9 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(Both sides of cable) | |||
22 | 9.1 | 3½ X 35 sq. mm (32mm) | Item 010 | 1 | Set |
23 | 9.2 | 3½ X 50 sq. mm (35mm) | Item 011 | 1 | Set |
24 | 10 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required | Item 012 | 4 | set |
25 | 11 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required | Item 013 | 20 | Metre |
26 | 12 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring cable as required. | Item 014 | 30 | Metre |
27 | 13 | Dismantling & removing old existing MV panel, restoring the finish and other miscellaneous work.etc | Item 015 | 1 | L.S. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail