Installation Of Speed Calming Measures And Road Safety Furnitures On Western Approaches Of Signature Bridge And Outer Ring Road From Wazirabad Flyover To Burari Flyover .
Tender Value
96.09 Lakhs
Estimated cost
Bid Submission
30 Mar 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Burari → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Speed Calming Measures And Road Safety Furnitures On Western Approaches Of Signature Bridge And Outer Ring Road From Wazirabad Flyover To Burari Flyover .
BOQ
| Name of Work:- Installation of speed calming measures and road safety furnitures on western approaches of signature bridge and Outer Ring Road from Wazirabad flyover to Burari flyover. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635kg tested in accordance with ASTM D4280.The slope of retro- reflective surface shall be 35( +/-5) degrees to base .The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 :1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. | 2220 | Each | |
| 2 | 2 | Structural Steel work in built up tubular sections in Shoulder mounted (DSM, Cautionary, Mandatory, Facility,Road Name and place identification ) signage including cutting, hoisting fixing in position , welded and bolted including special shaped washers etc. complete. | |||
| 3 | 2.1 | Hot finished welded type tubes | 2281 | Kg | |
| 4 | 3 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. | |||
| 5 | 3.1 | On steel work | 62 | Sqm | |
| 6 | 4 | Add Cost Index16.64% | 1 | Job | |
| 7 | 5 | Minus 9.50% as per Delhi Govt. order | 1 | Job | |
| 8 | 6 | Providing and applying 12 mm thick road marking strips (retro-reflective) in 6 layers of 2mm each of specified shade / colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser on top layer, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-incharge and accordance with applicable specifications. | 1163 | Sqm. | |
| 9 | 7 | Providing and applying 2.0 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicablespecifications. | 5420 | Sqm. | |
| 10 | 8 | Providing and fixing Anchor Fastner size of M-20, 200mm long bolt for fixing of Signage board with side of Bridge wall complete as per the direction of Engineer-in-charge. | 308 | Nos. | |
| 11 | 9 | Providing and installing retro-reflective Single Sided Overhead DSM, Cautionary and Cheveron signboards comprising of customised modular MS hollow section frame work, aluminum composite panel (ACP) mill finished or PVDF coated or as specified as base board, micro prismatic retro reflective sheet and electro cut coloured overlay film. The horizontal and vertical members of the MS frame shall be made of a MS hollow section of size 50x50x4.5mm . No panel size shall be more than one sqm and each panel shall be braced diagonally with same section. The aluminum composite panel (ACP) shall have a thickness of 4 mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be routed, folded up to half of the width of side edge and fixed on the MS frame with double sided VHB tape 24 mm wide and 2.3 mm thick provided through out the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300 mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front face of the ACP, Micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-07 shall be pressure fixed as background sheet (in white colour) which will be over laid with electro - cut transparent film of approved make and colour to create a desired road sign and information messsage. The rear side of the MS frame shall be covered with balancing ACP sheet of the same description as mentioned above and shall be fixed in similar manner as described above. The edges of the borad shall be covered alround with powder coated die cast extruded aluminium channel of required colour and shade of size 68X12X2 mm.The channel shall be fixed using two rows of double sided VHB tape of above description. The channel shall further be secured by pop rivets having SS mandrel of 5 mm dia at junctions and corners. | |||
| 12 | 9.1 | The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of Engineer-In-charge. Only front area of the board shall be measured for payment. (All Structural steel work, except MS hollow section frame work for the sign boards, shall be paid for separately under the relevant agreement item). | 38 | Sqm | |
| 13 | 10 | Providing and erecting ‘W’ Metal beam crash barrier comprising of 1 Nos. 3mm thick corrugated sheet metal beam rail fixed on ISMC series channel vertical post 150x75x5xmm spaced 1.50m centre to centre 1.50 high fixed in CC including making holes and fixing with nuts and bolts, all steel parts and fitments to galvanized by hot dip process, all fitting to confirm to IS-1367 and IS-1366, metal beam rail to be fixed on vertical post with a spacer of channel section 150x75x5mm, 330mm long complete as per MORTH Specification and directions of Engineer-in-charge. (CC 1:2:4 and excavating holes shall be paid separetly). | 342 | Mtr | |
| 14 | 11 | Providing and fixing solar studs as per Specifications: Construction: Aluminum-alloy shell, 100% water proof design according to Ip65, Dimension: 125 mm x 125 mm x 25mm (shank 60mm), High efficiency mono-crystalline Solar Panel 2:4 V/0.3 watt., One Ni-Mh or NI-cd rechargeable battery (1.2V/1600 MA), Six super bright LEDs with 10,000 to 18,000 mcd (Millicandela), view distance upto 1000 meters. Flash rate : 2Hz or according to customers requirements, bearable weight : 10 tons approx, color: Yellow, red, blue, green or white, working time: 3 to 45 days after fully charged battery, charging time : 5 to 6 hours from direct sun light working temp : 100 – 750c, life span: three to five years, easy installation, no maintenance, Unbreakable poly carbonate clear facing designed for maintenance free operation, automatically turns on at night and turns off at dawn, high visibility LED’s ensure easy and safe night driving. As approved by Engineer-in-Charge. | |||
| 15 | 11.1 | The studs shall be fixed to the Road surface using the adhesive conforming to IS. As per procedure recommended by the manufacturer complete and as per direction of Engineer-in-Charge. | 1110 | Each | |
| 16 | 12 | Providing and fixing spring post made (dark eye Model No. DA-954 or equivalent) of special PU (Poly Urethane) material should having the following features for durability and performance: - \n1. The body of spring post should be made of virgin special flexible material PU (Polyurethane).\n2. It can be quickly retsored to its original state without doing any damage to spring post as well as vehicles in case of high - speed collision by vehicles.\n3. Two bands of special heat transfer tape/high quality tape adhesive of minimum 70 mm must be pasted on the spring post for better and clear visiblity in the night.\n4. It should keep excellent, mechanical and chemical propertoes such as impact resisitance and tensile strength to withstand in very hot or very cold temperatures.\n5. It should have ultra violet stablizer so that it is not discoloured. \n6. It should be in three different parts: upper tubuler part should be made out of PU & two bottom parts should be made out of ABS (Astronitrilite Butadine Styrene).\n7. All three parts should be assembled together with the help of three nuts and bolts.\n8. Specialy epoxy bond is used to fix the spring post with road surface. The bond should be so strong that post will not be deviated by strong impact after installation.\n9. Dimensions : Length 710 mm, upper dia 80 mm & bottom dia is 210 mm. Weight of the upper body is 1100 gms, outer/inner part (lower part) 500 gms and weight of nuts/bolts 180 gms approx. Total weight of the spring post should not be less than 1800 gms approx.\n | 60 | Each | |
| 17 | 13 | Providing and Fixing of Flexible Median Markers which shall be made of combination of tough, high impact resistant molded thermoplastic body along with florescent yellow color retro-reflective type XI sheeting with minimum exposed reflective area 285 square mm and with rebound property. The reflective sheeting should confirm to Type XI Florescent Yellow sheeting as per IRC 67 2012 and ASTM D4956-11. The flexible median marker shall have overall height of minimum 180 mm, body thickness of minimum 2mm and shank depth of minimum 30mm. The retro-reflective sheeting shall be on both sides of the Flexible Median Marker and shall be edge protected with no exposed edges which will prevent edge lifting, vandalism, sheeting damage, etc. The edge of sheeting should not come out easily by putting nails, sharp objects etc. The logo of the manufacturer shall be embossed on either side of the body. The plastics used for the molding the flexible median marker shall have a minimum notched Izod Impact strength value of 4.11J/cm (@thickness 3.17mm) at room temperature, tested in accordance with ASTM D256. The product design has to with stand all natural impacts and should not get damaged if any pedestrian stamp on top of it intentionally or unintentionally. The product should bend up to 90 degree on both sides without breakage or damage. The product shall be povided with 3 year outdoor weathering report as per ASTM & IRC Standards & 10 year warranty confirmation as per IRC 67:2012 standards for the reflective sheeting used in product. The product shall have accredition with IRC. | 1478 | Each |
AI Tender Summary
Tender Timeline
Mar 22, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 30, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 30, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender