Uttarakhand Jal Vidyut Nigam Limited-UJVN has published Special Repair Of Gates , Boundary Wall And Fencing With Concertina Coil Of Switchyard And Other Allied Works Of Chibro Power House. Submission Date for this Tender is 12-04-2021. Switch Yard Tenders in Chibro Uttarakhand. Bidders can get complete Tender details and download the document.
| Name of Work: Special Repair of Gates, boundary wall and fencing with concertina coil of switchyard and other allied works of Chibro Power House. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. CP | BI01010001010000000000000515BI0100001101 | 450 | Sqm. |
| 2 | 2 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 meters lead. | BI01010001010000000000000515BI0100001102 | 37.6 | Kg |
| 3 | 3 | Demolishing stone rubble masonry In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge | BI01010001010000000000000515BI0100001103 | 5 | Cum |
| 4 | 4 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. | BI01010001010000000000000515BI0100001104 | 50 | Kg |
| 5 | 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer in charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). | BI01010001010000000000000515BI0100001105 | 1 | Cum |
| 6 | 6 | Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. (In cement mortar) | BI01010001010000000000000515BI0100001106 | 1.73 | Cum |
| 7 | 7 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge.All kinds of soil. | BI01010001010000000000000515BI0100001107 | 2.78 | Cum |
| 8 | 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) . | BI01010001010000000000000515BI0100001108 | 1.25 | Cum |
| 9 | 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:1.5:3 (1 Cement:1.5 Coarse Sand (zone-III) : 3 Graded Stone Aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001109 | 2.53 | Cum |
| 10 | 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001110 | 1.8 | Cum |
| 11 | 11 | Providing and laying 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work above plinth level | BI01010001010000000000000515BI0100001111 | 1.8 | Cum. |
| 12 | 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level..Work using Mild Steel and Medium/Tensile Steel Bars | BI01010001010000000000000515BI0100001112 | 229.16 | Kg. |
| 13 | 13 | Centering and shuttering Foundations, footings, bases of columns, etc. for mass concrete including strutting, propping etc. and removal of form for all heights | BI01010001010000000000000515BI0100001113 | 26.6 | Sqm |
| 14 | 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand). | BI01010001010000000000000515BI0100001114 | 2.89 | Cum. |
| 15 | 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand). | BI01010001010000000000000515BI0100001115 | 5.12 | Cum. |
| 16 | 16 | Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement :4 coarse sand). | BI01010001010000000000000515BI0100001116 | 2.5 | Sqm |
| 17 | 17 | Fencing With G.I. barbed wire with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 meters (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per meter cost of total length of barbed wire used. | BI01010001010000000000000515BI0100001117 | 20 | metre |
| 18 | 18 | Fencing With G.I. barbed wire with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per meter cost of total length of barbed wire used. | BI01010001010000000000000515BI0100001118 | 270 | metre |
| 19 | 19 | Supplying at site R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3(1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in charge (cost of earth works in excavation, concrete works in foundation to be paid separately). | BI01010001010000000000000515BI0100001119 | 0.34 | cum |
| 20 | 20 | 12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand) . | BI01010001010000000000000515BI0100001120 | 10 | Sqm. |
| 21 | 21 | Supply and fixing welded mesh Jali of 50x50 mm and 10 gauge including cost of all material, labour and T&P etc. complete required for proper completion of the work. (NSI) | BI01010001010000000000000515BI0100001121 | 90 | Sqm |
| 22 | 22 | Attending minor type of repair etc. for full day by engaging and supplying one suitable beldar / mazdoor for carrying simple type of repairing of all work including all T&P etc. complate but excluding cost of material. | BI01010001010000000000000515BI0100001122 | 5 | Job |
| 23 | 23 | Removalof debris /waste material/ any other material / rubbish by full load tractor trolley as desired by the Engineer-in- charge & safe disposal of the same out side the nigam area including cost of all labour, T&P etc required for proper loading/unloading and disposal of waste or any other material required for the proper completion of the work. (NSI) | BI01010001010000000000000515BI0100001123 | 20 | Per trip |
| 24 | 24 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. | BI01010001010000000000000515BI0100001124 | 100 | Sqm. |
| 25 | 25 | Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. | BI01010001010000000000000515BI0100001125 | 15 | Sqm. |
| 26 | 26 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. | BI01010001010000000000000515BI0100001126 | 310 | Sqm. |
| 27 | 27 | Hire charges of welding machine with single phase with welder, helper and electrodes etc. for repair and welding of gates, door, window etc. for 8 hrs. in a day complete with all material labour, T&P etc. required for proper completion of work. | BI01010001010000000000000515BI0100001127 | 10 | Job |
| 28 | 28 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | BI01010001010000000000000515BI0100001128 | 10148.8 | Kg |
| 29 | 29 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001129 | 513 | Sqm |
| 30 | 30 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 | BI01010001010000000000000515BI0100001130 | 15 | Cum |
| 31 | 31 | Providing and fixing on wall face unplasticised Rigid 110 mm diameter PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (I) Single socketed pipes. | BI01010001010000000000000515BI0100001131 | 20 | Meter |
| 32 | 32 | Providing and Laying of Mechanically Woven Double Twisted Hexagonal shaped Gabions of galvanized steel, of size 3mX1mX1m with two diaphragms at 1m interval, having mesh opening 100mmx120 mm, mesh wire diameter 3 mm for gabions, edge/selvedge wire diameter 3.9 mm and lacing wire diameter 2.2 mm. (The work includes filling boulders in the gabions). | BI01010001010000000000000515BI0100001132 | 20 | No. |
| 33 | 33 | Pointing Raised and cut pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : CPWD DSR 2018 13.33.2 | BI01010001010000000000000515BI0100001133 | 6.75 | No. |
| 34 | 34 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) | BI01010001010000000000000515BI0100001134 | 100 | sqm |
| 35 | 35 | Providing and fixing concertina coil fencing with punched tapeconcertina coil 600 mm dia 10 meter open able length ( total length90 m), having 50 nos rounds per 6 meter length, up to 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apartand with 9 horizontal R.B.T. reinforced barbed wire, stud tied withG.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ meter (cost of M.S. angle, C.C. blocks shall be paid separately) | BI01010001010000000000000515BI0100001135 | 905 | RM |
| 36 | 36 | Attending minor type of repair etc. for full day by engaging and supplying one suitable Mistry/Mason for carrying simple type of repairing of all work including all T&P etc. complete required for proper completion of the work as per direction of Engineer in-Charge but excluding cost of material.(NSI) | BI01010001010000000000000515BI0100001136 | 40 | Job. |
| 37 | 37 | Attending minor type of repair etc. for full day by engaging and supplying one suitable Plumber/Painter 1st class/ mason 2nd class for carrying simple type of repairing of all work including all T&P etc. complete required for proper completion of the work as per direction of Engineer in-Charge but excluding cost of material.(NSI) | BI01010001010000000000000515BI0100001137 | 50 | Job. |
| 38 | 38 | Engaging and operation of one no. Hydraulic Excavator cum loader machien(preferably JCB) with one operator /driver, helper including cost of the fuel,lubricants and repair maintence etc. for removal of slip/landslide/ excavated earth/ excavation in dry and wet condition etc . complete in all respect as per direction of Engineer-in-charge(NSI) | BI01010001010000000000000515BI0100001138 | 30 | Hrs |
| 39 | 39 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).(CPWD 2018 5.2.2) | BI01010001010000000000000515BI0100001139 | 7 | Cum. |
| 40 | 40 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by engineering-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purloins, rafters and trusses and including cutting to size and shape wherever required. (CPWD DSR 2018 Code No.-12.50) | BI01010001010000000000000515BI0100001140 | 50 | Hrs |
| 41 | 41 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer | BI01010001010000000000000515BI0100001141 | 53.94 | Sqm |
| 42 | 42 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001142 | 53.94 | Sqm. |
| 43 | 43 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). | BI01010001010000000000000515BI0100001143 | 150 | Sqm. |
| 44 | 44 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. | BI01010001010000000000000515BI0100001144 | 60 | Sqm. |
| 45 | 45 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories Bend 87.5° 110 mm bend | BI01010001010000000000000515BI0100001145 | 30 | Nos |
| 46 | 46 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories 110 mm Shoe (Plain) | BI01010001010000000000000515BI0100001146 | 30 | Nos |
| 47 | 47 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Concealed pipe with anti corrosive bitumastic paint, cutting chases and making good the wall | BI01010001010000000000000515BI0100001147 | ||
| 48 | 47.01 | 15 mm dia. nominal bore | BI01010001010000000000000515BI0100001148 | 40 | RM |
| 49 | 47.02 | 20 mm dia. nominal bore | BI01010001010000000000000515BI0100001149 | 30 | RM |
| 50 | 48 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) | BI01010001010000000000000515BI0100001150 | ||
| 51 | 48.01 | 25 mm dia. nominal bore | BI01010001010000000000000515BI0100001151 | 50 | RM |
| 52 | 49 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore | BI01010001010000000000000515BI0100001152 | 10 | Nos. |
| 53 | 50 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore | BI01010001010000000000000515BI0100001153 | 10 | Nos. |
| 54 | 51 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore | BI01010001010000000000000515BI0100001154 | 10 | Nos. |
| 55 | 52 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. Flexible pipe 32mm dia | BI01010001010000000000000515BI0100001155 | 5 | Nos. |
| 56 | 53 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore | BI01010001010000000000000515BI0100001156 | 5 | Nos. |
| 57 | 54 | Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats 20 mm nominal bore | BI01010001010000000000000515BI0100001157 | 2 | Nos. |
| 58 | 55 | Providing and fixing brass stop cock of approved quality 20 mm nominal bore | BI01010001010000000000000515BI0100001158 | 5 | Nos. |
| 59 | 56 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) | BI01010001010000000000000515BI0100001159 | ||
| 60 | 56.01 | 25 mm dia. nominal bore | BI01010001010000000000000515BI0100001160 | 4 | Nos. |
| 61 | 57 | Providing and fixing white vitreous china pedestal type water = closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001161 | 1 | Nos. |
| 62 | 58 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass each pillar tap | BI01010001010000000000000515BI0100001162 | 1 | Nos. |
| 63 | 59 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | BI01010001010000000000000515BI0100001163 | 1 | Nos. |
| 64 | 60 | Providing and fixing PVC plain bend of required degree. ( 75 mm dia) | BI01010001010000000000000515BI0100001164 | 2 | Nos. |
| 65 | 61 | Providing and fixing PVC Single tee with door required degree access door 75x75x75x110mm | BI01010001010000000000000515BI0100001165 | 2 | Nos. |
| 66 | 62 | Providing and fixing PVC Single tee with door required degree access door 110x110x100x110mm | BI01010001010000000000000515BI0100001166 | 5 | Nos. |
| 67 | 63 | Providing and fixing on wall face unplasticised Rigid PVC pipes (75 mm dia) | BI01010001010000000000000515BI0100001167 | 5 | Nos. |
| 68 | 64 | Providing and fixing on wall face unplasticised Rigid PVC pipes (110mm dia) | BI01010001010000000000000515BI0100001168 | 5 | Nos. |
| 69 | 65 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001169 | 20 | Sqm. |
| 70 | 66 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to sq.m IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001170 | 10 | Sqm. |
| 71 | 67 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001171 | 30 | Sqm. |
| 72 | 68 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | BI01010001010000000000000515BI0100001172 | 10 | Sqm. |
| 73 | 69 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm | BI01010001010000000000000515BI0100001173 | 45 | Sqm. |
| 74 | 70 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | BI01010001010000000000000515BI0100001174 | ||
| 75 | 70.01 | Marble work | BI01010001010000000000000515BI0100001175 | 5 | RM |
| 76 | 70.02 | Granite Work | BI01010001010000000000000515BI0100001176 | 10 | RM |
| 77 | 71 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge: Fixing with adjustable lugs with split end tail to each jamb. | BI01010001010000000000000515BI0100001177 | ||
| 78 | 71.01 | Profile B | BI01010001010000000000000515BI0100001178 | 50 | RM |
| 79 | 72 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001179 | ||
| 80 | 72.01 | Door Fittings (Aluminum) | BI01010001010000000000000515BI0100001180 | 10 | Sqm. |
| 81 | 73 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (125mm) | BI01010001010000000000000515BI0100001181 | 5 | Nos. |
| 82 | 73.01 | Same as above but 75mm | BI01010001010000000000000515BI0100001182 | 5 | Nos. |
| 83 | 74 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete (200X10mm) | BI01010001010000000000000515BI0100001183 | 5 | Nos. |
| 84 | 74.01 | Same as above but (150X10mm) | BI01010001010000000000000515BI0100001184 | 5 | Nos. |
| 85 | 74.02 | Same as above but (100X10mm) | BI01010001010000000000000515BI0100001185 | 5 | Nos. |
| 86 | 75 | Providing and fixing aluminum sliding door bolts, ISI marked anodized anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required color or shade, with nuts and screws etc. complete : 300x16 mm | BI01010001010000000000000515BI0100001186 | 5 | Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
