Construction And Development Of Mahadev Tample At Ram Nagar , District- Barabanki
Tender Value
37.92 Lakhs
Estimated cost
Bid Submission
24 Mar 2021
0 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
RAM NAGAR → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction And Development Of Mahadev Tample At Ram Nagar , District- Barabanki
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Mar-2021 | Corrigendum | Other | 24-Mar-2021 |
BOQ
| Name of Work: CONSTRUCTION AND DEVELOPMENT OF MAHADEV TAMPLE AT RAM NAGAR, DISTRICT- BARABANKI | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil Work | BI01010001010000000000000515BI0100001112 | ||
| 2 | 2 | Excavation in foundation in ordinary soil (Loam,clay or sand) including lift up to 1.50 m and lead up to 30 m and including filling watering and ramming of excavated earth in to the space between the building and the side of foundation trenches. directed by the Engineer i/c with in a lead of 50m. | BI01010001010000000000000515BI0100001113 | 37.38 | CUM |
| 3 | 3 | Filling of carted earth. | BI01010001010000000000000515BI0100001114 | 1.54 | CUM |
| 4 | 4 | Local sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. | BI01010001010000000000000515BI0100001115 | 3.85 | CUM |
| 5 | 5 | Providing and laying in cement concrete 1:4:8 (1 cement :4 fine sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form-work,in foundation and floors. | BI01010001010000000000000515BI0100001116 | 9.03 | CUM |
| 6 | 6 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1)Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm | BI01010001010000000000000515BI0100001117 | 34.06 | SQM |
| 7 | 7 | R.c.c. works with cement approved coarse sand and 2 cm. (3/4\") guage approved stone ballast in the proportion 1:1.5:3 along with synthetic Triangular fibre of cut length 12 mm. Specific gravity 1.34, dosage @ 900 gms. / cum ( Recron 3s of Reliance industries ltd.) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc,required for proper completion of the works. strength of the concrete shall not be less than M-200 Design Mix. | BI01010001010000000000000515BI0100001118 | 0.445 | CUM |
| 8 | 8 | As in item 7 above but for slabs | BI01010001010000000000000515BI0100001119 | 6.31 | CUM |
| 9 | 9 | As in item 7 but for the lighter beams i.e. having spans upto 6 m. | BI01010001010000000000000515BI0100001120 | 2.18 | CUM |
| 10 | 10 | Class 150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001121 | 22.64 | CUM |
| 11 | 11 | Same as in item no. 10 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms.(230 MM WALL) | BI01010001010000000000000515BI0100001122 | 18.07 | CUM |
| 12 | 12 | Same as in item no. 10 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below. | BI01010001010000000000000515BI0100001123 | 3.06 | CUM |
| 13 | 13 | Providing and laying water proofing treatment in sunken portion of Terrace,WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | BI01010001010000000000000515BI0100001124 | 34.06 | SQM |
| 14 | 14 | Supply and fixing of flush doors commercial quality conforming to I.S. 2202 Part I (1483) including fixing of wooden cleats and stoppers and including ixing and adjustment of hinges, bolts,locks, handle, springs and other fittings but excluding their supply and including painting with two coats of Black Japan paint on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. (a) 32 mm thick | BI01010001010000000000000515BI0100001125 | 10.08 | SQM |
| 15 | 15 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing | BI01010001010000000000000515BI0100001126 | ||
| 16 | 16 | Fabrication of hold fast for door chaukhats and windows. | BI01010001010000000000000515BI0100001127 | 26.4 | KG |
| 17 | 17 | Fabrication of grill / stair case railing. | BI01010001010000000000000515BI0100001128 | 40.5 | KG |
| 18 | 18 | Fabrication of Z-section steel windows. | BI01010001010000000000000515BI0100001129 | 56.7 | KG |
| 19 | 19 | Fabrication of angle iron door chaukhat of 40x40x5 mm. | BI01010001010000000000000515BI0100001130 | 90 | KG |
| 20 | 20 | P/F of Mosquito jali for window shutters. | BI01010001010000000000000515BI0100001131 | 1.62 | SQM |
| 21 | 21 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. | BI01010001010000000000000515BI0100001132 | 7.87 | QTL. |
| 22 | 22 | 12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering up to floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive. (1)1 cement : 6 Coarse sand | BI01010001010000000000000515BI0100001133 | 90.53 | SQM |
| 23 | 23 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1)1 cement:6 Coarse sand | BI01010001010000000000000515BI0100001134 | 124.35 | SQM |
| 24 | 24 | Making grooves 10 to 12 mm widex 8mm deep in plaster of the wall or in ceiling vertically or horizontally as required. | BI01010001010000000000000515BI0100001135 | 55.48 | RM |
| 25 | 25 | Making drip course in sun shade or FACIA as per direction ofengineer -in - charge including supply of all materials labour etc.required for proper completion ofthe work. | BI01010001010000000000000515BI0100001136 | 10.24 | RM |
| 26 | 26 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement(25 mm thick floor). | BI01010001010000000000000515BI0100001137 | 22.185 | SQM |
| 27 | 27 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | BI01010001010000000000000515BI0100001138 | 5.4225 | SQM |
| 28 | 28 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey , Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001139 | 22.445 | SQM |
| 29 | 29 | Supply and fixing 6 mm (1/4\")thick China required for proper completion of the work white glazed tiles in wall or skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc.. | BI01010001010000000000000515BI0100001140 | 112.18 | SQM |
| 30 | 30 | Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001141 | 12.53 | SQM |
| 31 | 31 | Same as item 30 above but on new wood surface. | BI01010001010000000000000515BI0100001142 | 20.16 | SQM |
| 32 | 32 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001143 | 140.94 | SQM |
| 33 | 33 | Finishing walls with Primium Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | BI01010001010000000000000515BI0100001144 | 90.53 | SQM |
| 34 | 34 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. | BI01010001010000000000000515BI0100001145 | 50.41 | SQM |
| 35 | 35 | Fixing panes of glass with atul or equivalent I.S.I. marked quality putty, brads and springs complete. (a) 4 mm thick | BI01010001010000000000000515BI0100001146 | 21.6 | SQM |
| 36 | 36 | Providing Oxidised iron sliding bolts 16 mm dia with nuts and 300 mm long. (ii) Oxidised iron | BI01010001010000000000000515BI0100001147 | 6 | NOS |
| 37 | 37 | Providing Oxidised iron tower bolt with 10 mm dia and screw. (i) 250 mm long | BI01010001010000000000000515BI0100001148 | 6 | NOS |
| 38 | 38 | Providing Oxidised iron door handles with screws 100 mm long. | BI01010001010000000000000515BI0100001149 | 12 | NOS |
| 39 | 39 | SANITARY FIXTURES & ACCESSORIES : I | BI01010001010000000000000515BI0100001150 | ||
| 40 | 40 | Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. | BI01010001010000000000000515BI0100001151 | ||
| 41 | 41 | Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement. | BI01010001010000000000000515BI0100001152 | 2 | Nos. |
| 42 | 42 | Same as above but for European type W.C. pan with black plastic seat and lid. Make- Cera,Hindustan. | BI01010001010000000000000515BI0100001153 | 2 | Nos. |
| 43 | 43 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required. a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. | BI01010001010000000000000515BI0100001154 | 5 | Nos. |
| 44 | 44 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. | BI01010001010000000000000515BI0100001155 | ||
| 45 | 45 | a) 32mm dia | BI01010001010000000000000515BI0100001156 | 5 | Nos. |
| 46 | 46 | b) 40mm dia | BI01010001010000000000000515BI0100001157 | 3 | Nos. |
| 47 | 47 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. | BI01010001010000000000000515BI0100001158 | 5 | No. |
| 48 | 48 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: | BI01010001010000000000000515BI0100001159 | ||
| 49 | 49 | a) Range of one urinal basins with 5.0 litre white P.V.C. automatic flushing cistern Parryware/ Hindware Seabird/ Orient (Coral) | BI01010001010000000000000515BI0100001160 | 1 | Each |
| 50 | 50 | b) Range of two urinal basins with 5.0 litre white P.V.C. automatic flushing cistern Parryware/ Hindware Seabird/ Orient (Coral) | BI01010001010000000000000515BI0100001161 | 2 | Each |
| 51 | 51 | Providing & fixing 60x2cm. C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw. | BI01010001010000000000000515BI0100001162 | 5 | Nos. |
| 52 | 52 | Providing & fixing white vitreous china urinal division plate as required. | BI01010001010000000000000515BI0100001163 | 2 | Nos |
| 53 | 53 | SOIL WASTE & VENT PIPES AND FITTINGS - II | BI01010001010000000000000515BI0100001164 | ||
| 54 | 54 | Providing & fixing soil, waste and vent pipes. | BI01010001010000000000000515BI0100001165 | ||
| 55 | 55 | a) 100mm dia centrifugally P.V.C pipe. | BI01010001010000000000000515BI0100001166 | 35 | Rm. |
| 56 | 56 | b) 75mm dia centrifugally P.V.C. pipe. | BI01010001010000000000000515BI0100001167 | 25 | Rm. |
| 57 | 57 | Providing and fixing terminal guard. | BI01010001010000000000000515BI0100001168 | ||
| 58 | 58 | a) 100mm | BI01010001010000000000000515BI0100001169 | 2 | Nos. |
| 59 | 59 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. | BI01010001010000000000000515BI0100001170 | ||
| 60 | 60 | 100mm bend | BI01010001010000000000000515BI0100001171 | 12 | Each |
| 61 | 61 | 75mm bend | BI01010001010000000000000515BI0100001172 | 6 | Each |
| 62 | 62 | Coupler | BI01010001010000000000000515BI0100001173 | ||
| 63 | 63 | 100mm | BI01010001010000000000000515BI0100001174 | 2 | Each |
| 64 | 64 | 75mm | BI01010001010000000000000515BI0100001175 | 4 | Each |
| 65 | 65 | Single tee with door | BI01010001010000000000000515BI0100001176 | ||
| 66 | 66 | 100x100x100 mm | BI01010001010000000000000515BI0100001177 | 2 | Each |
| 67 | 67 | 75x75x75 mm | BI01010001010000000000000515BI0100001178 | 4 | Each |
| 68 | 68 | Providing and fixing clean out plug | BI01010001010000000000000515BI0100001179 | ||
| 69 | 69 | Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince) | BI01010001010000000000000515BI0100001180 | ||
| 70 | 70 | a) 100mm inlet & 75mm outlet. | BI01010001010000000000000515BI0100001181 | 12 | No. |
| 71 | 71 | Extra for providing & fixing 125mm dia C.P. grating in place of C.I. grating over floor traps. | BI01010001010000000000000515BI0100001182 | 10 | Nos |
| 72 | 72 | WATER SUPPLY PIPES AND FITTINGS - III | BI01010001010000000000000515BI0100001183 | ||
| 73 | 73 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. | BI01010001010000000000000515BI0100001184 | ||
| 74 | 74 | (internal work) | BI01010001010000000000000515BI0100001185 | ||
| 75 | 75 | Exposed on wall | BI01010001010000000000000515BI0100001186 | ||
| 76 | 76 | a) 25mm dia nominal bore (medium duty) | BI01010001010000000000000515BI0100001187 | 25 | Rm. |
| 77 | 77 | a) 32mm dia nominal bore (medium duty) | BI01010001010000000000000515BI0100001188 | 25 | Rm. |
| 78 | 78 | a) 40mm dia nominal bore (medium duty) | BI01010001010000000000000515BI0100001189 | 15 | Rm. |
| 79 | 79 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. | BI01010001010000000000000515BI0100001190 | ||
| 80 | 80 | a) 15mm dia nominal bore | BI01010001010000000000000515BI0100001191 | 20 | Rm. |
| 81 | 81 | b) 20mm dia nominal bore | BI01010001010000000000000515BI0100001192 | 25 | Rm. |
| 82 | 82 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. | BI01010001010000000000000515BI0100001193 | ||
| 83 | 83 | a) 15mm dia nominal bore. | BI01010001010000000000000515BI0100001194 | 20 | Rm. |
| 84 | 84 | b) 20mm dia nominal bore. | BI01010001010000000000000515BI0100001195 | 25 | Rm. |
| 85 | 85 | c) 25mm dia nominal bore. | BI01010001010000000000000515BI0100001196 | 15 | Rm. |
| 86 | 86 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. | BI01010001010000000000000515BI0100001197 | ||
| 87 | 87 | a) 15mm nominal bore | BI01010001010000000000000515BI0100001198 | 10 | Nos. |
| 88 | 88 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 | BI01010001010000000000000515BI0100001199 | ||
| 89 | 89 | a) 15mm nominal bore | BI01010001010000000000000515BI0100001200 | 4 | Nos. |
| 90 | 90 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. | BI01010001010000000000000515BI0100001201 | ||
| 91 | 91 | a) 15mm nominal bore | BI01010001010000000000000515BI0100001202 | 7 | Nos. |
| 92 | 92 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 | BI01010001010000000000000515BI0100001203 | ||
| 93 | 93 | a) 15mm nominal bore | BI01010001010000000000000515BI0100001204 | 5 | Nos. |
| 94 | 94 | Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats). | BI01010001010000000000000515BI0100001205 | ||
| 95 | 95 | a) 25mm. Nominal bore | BI01010001010000000000000515BI0100001206 | 1 | Nos |
| 96 | 96 | Providing and fixing gun metal gate valve with wheel of approved quality. | BI01010001010000000000000515BI0100001207 | ||
| 97 | 97 | a) 25mm dia nominal bore | BI01010001010000000000000515BI0100001208 | 2 | Each |
| 98 | 98 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Capacity 2000 litre | BI01010001010000000000000515BI0100001209 | 2000 | Ltrs. |
| 99 | 99 | SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE SYSTEM - IV | BI01010001010000000000000515BI0100001210 | ||
| 100 | 100 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. | BI01010001010000000000000515BI0100001211 | ||
| 101 | 101 | a) Pipes 80mm to 300mm diameter. | BI01010001010000000000000515BI0100001212 | 20 | RM |
| 102 | 102 | Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. | BI01010001010000000000000515BI0100001213 | ||
| 103 | 103 | a) 100mm diameter | BI01010001010000000000000515BI0100001214 | 8 | M |
| 104 | 104 | b) 150mm diameter | BI01010001010000000000000515BI0100001215 | 15 | M |
| 105 | 105 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. | BI01010001010000000000000515BI0100001216 | ||
| 106 | 106 | a) 100mm diameter S.W. Pipe | BI01010001010000000000000515BI0100001217 | 8 | M |
| 107 | 107 | b) 150mm diameter S.W. Pipe | BI01010001010000000000000515BI0100001218 | 15 | M |
| 108 | 108 | Providing and fixing square mouth S.W. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design. | BI01010001010000000000000515BI0100001219 | ||
| 109 | 109 | a) 150 x 100 mm. size P type | BI01010001010000000000000515BI0100001220 | 2 | Nos |
| 110 | 110 | PVC PIPES & FITTINGS AND RAIN WATER PIPES V | BI01010001010000000000000515BI0100001221 | ||
| 111 | 111 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm | BI01010001010000000000000515BI0100001222 | 2 | Each |
| 112 | 112 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm | BI01010001010000000000000515BI0100001223 | 6.9 | Metre |
| 113 | 113 | Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. | BI01010001010000000000000515BI0100001224 | ||
| 114 | 114 | 110 mm Bend | BI01010001010000000000000515BI0100001225 | 2 | Each |
| 115 | 115 | 110 mm Shoe | BI01010001010000000000000515BI0100001226 | 2 | Each |
| 116 | 116 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | BI01010001010000000000000515BI0100001227 | 2 | Each |
| 117 | 117 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. | BI01010001010000000000000515BI0100001228 | 2 | Each |
| 118 | 118 | ELECTRICAL WORK | BI01010001010000000000000515BI0100001229 | ||
| 119 | 119 | Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. | BI01010001010000000000000515BI0100001230 | 9 | PT |
| 120 | 120 | Same as item No. 119 but for fan and light duty exhaust fan. | BI01010001010000000000000515BI0100001231 | 2 | PT |
| 121 | 121 | Same as item No. 119 but for 5 amp plug point with piano type switch and socket etc. | BI01010001010000000000000515BI0100001232 | 3 | PT |
| 122 | 122 | Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. | BI01010001010000000000000515BI0100001233 | 150 | Rm. |
| 123 | 123 | Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. | BI01010001010000000000000515BI0100001234 | 2 | Each |
| 124 | 124 | Supply & fixing of recess mounting round 12 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. | BI01010001010000000000000515BI0100001235 | 5 | Each |
| 125 | 125 | S/F of single light wall bracket on matching M.D.F.E.G. board base etc. complete in all respects. | BI01010001010000000000000515BI0100001236 | 4 | Nos. |
| 126 | 126 | Supply & fixing of LED Tube light with batten suitable for up to 1X22 watt led tube light fitting including tube on surface complete in all respect. | BI01010001010000000000000515BI0100001237 | ||
| 127 | 127 | a) 1x22 Watt. | BI01010001010000000000000515BI0100001238 | 4 | Nos. |
| 128 | 128 | Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required a) 300mm sweep. | BI01010001010000000000000515BI0100001239 | 2 | Nos. |
| 129 | 129 | Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. a) 480x480x200 mm. size | BI01010001010000000000000515BI0100001240 | 2 | Nos |
| 130 | 130 | Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary | BI01010001010000000000000515BI0100001241 | ||
| 131 | 131 | conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001242 | ||
| 132 | 132 | a) 480x480x200 mm. size | BI01010001010000000000000515BI0100001243 | 2 | Nos |
| 133 | 133 | Supply and fixing of flush/surface mounting distribution boards complete in all respects. | BI01010001010000000000000515BI0100001244 | ||
| 134 | 134 | a) 12 Way SPN | BI01010001010000000000000515BI0100001245 | 2 | Nos. |
| 135 | 135 | Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required. | BI01010001010000000000000515BI0100001246 | ||
| 136 | 136 | a) 5 - 32 amps. | BI01010001010000000000000515BI0100001247 | 8 | Nos. |
| 137 | 137 | Supply fixing and making connection of M.C.BS complete in all respects as per direction and satisfaction of engineer-in-charge. | BI01010001010000000000000515BI0100001248 | ||
| 138 | 138 | 32 Amp. 2 Pole | BI01010001010000000000000515BI0100001249 | 1 | Nos. |
| 139 | 139 | Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. | BI01010001010000000000000515BI0100001250 | 2 | Each |
| 140 | 140 | Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. | BI01010001010000000000000515BI0100001251 | 1 | Each |
| 141 | 141 | Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects. | BI01010001010000000000000515BI0100001252 | 50 | Rm |
| 142 | 142 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. | BI01010001010000000000000515BI0100001253 | ||
| 143 | 143 | 16 sqmm 2 core | BI01010001010000000000000515BI0100001254 | 30 | Rmt. |
| 144 | 144 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire | BI01010001010000000000000515BI0100001255 | ||
| 145 | 145 | 16 sqmm 2 core | BI01010001010000000000000515BI0100001256 | 2 | Each |
| 146 | 146 | Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. | BI01010001010000000000000515BI0100001257 | ||
| 147 | 147 | 16 Sq.mm | BI01010001010000000000000515BI0100001258 | 4 | Each |
| 148 | 148 | SEPTIC TANK & SOAK PIT Size :- Length = 5.00 M. Width = 2.00 M Total Depth =3.00M | BI01010001010000000000000515BI0100001259 | ||
| 149 | 149 | Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed. | BI01010001010000000000000515BI0100001260 | ||
| 150 | 150 | In all kind of soil upto 1.5m depth | BI01010001010000000000000515BI0100001261 | 28.22 | Cum |
| 151 | 151 | In all kind of soil upto 1.5m to 3.0m. depth | BI01010001010000000000000515BI0100001262 | 25.93 | Cum |
| 152 | 152 | In all kind of soil upto 3.0m to 4.5m. depth | BI01010001010000000000000515BI0100001263 | 6.91 | Cum |
| 153 | 153 | Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 40mm nominal size) | BI01010001010000000000000515BI0100001264 | 2.77 | Cum |
| 154 | 154 | Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001265 | 2.28 | Cum |
| 155 | 155 | Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement. \n | BI01010001010000000000000515BI0100001266 | 14.27 | Cum |
| 156 | 156 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. \n | BI01010001010000000000000515BI0100001267 | 1.79 | QTL. |
| 157 | 157 | 12mm cement plaster on rough side of mix 1:3 (1 cement : 3 coarse sand) | BI01010001010000000000000515BI0100001268 | 60.96 | Sqm |
| 158 | 158 | Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. | BI01010001010000000000000515BI0100001269 | 12 | Nos. |
| 159 | 159 | Providing and fixing C.I. tee at the inlet and outlet of septic tank. | BI01010001010000000000000515BI0100001270 | 2 | Nos. |
| 160 | 160 | Providing & fixing 75mm dia vent pipes. | BI01010001010000000000000515BI0100001271 | 2 | Rm. |
| 161 | 161 | Providing & fixing of 75mm dia cast iron terminal guard. | BI01010001010000000000000515BI0100001272 | 1 | No. |
| 162 | 162 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. | BI01010001010000000000000515BI0100001273 | ||
| 163 | 163 | M.D. -10- Circular shape 500mm internal diameter | BI01010001010000000000000515BI0100001274 | 2 | No. |
| 164 | 164 | M.D. -2.5- Circular shape 450mm internal diameter | BI01010001010000000000000515BI0100001275 | 4 | No. |
| 165 | 165 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks | BI01010001010000000000000515BI0100001276 | 1 | No. |
| 166 | 166 | HIGHT MAST | BI01010001010000000000000515BI0100001277 | ||
| 167 | 167 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN complete in all respect. I/C:-125 Amp MCCB, Bus Bar-125A, O/G:-40 Amp SP-20No. | BI01010001010000000000000515BI0100001278 | 1 | Each |
| 168 | 168 | Supply and fixing of 12.5 mtr High mast Pole of approved make with rising system, hot dip Galvanized inside & outside , having pole sheet thickness 3mm, top minimum100mm, bottom dia minimum 310mm, base plate 25mm thick, suitable for wind velocity as per IS 875 part 3. & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes,0.75 HP Power tool motor, 3 point suspension system with steel wire rope 6mm dia , double drum winch Including making suitable Foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers , anchor plates etc Complete in all respect. as per direction and satisfaction to the Engineer-in-charge. | BI01010001010000000000000515BI0100001279 | 1 | Each |
| 169 | 169 | Supply and wiring of submiain with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy pvc conduit partly concealed on surface and 2no. 1.5sqmm earth continuity wiere including matching colour wash etc. complete in all respect. | BI01010001010000000000000515BI0100001280 | 50 | Metre |
| 170 | 170 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect.. CAT-AA\n\n | BI01010001010000000000000515BI0100001281 | 4 | Each |
| 171 | 171 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.as per direction of Engineer-Incharge.complete in all respect The armouring of the cable shall be properly connected with the earth conductor by clamps etc. | BI01010001010000000000000515BI0100001282 | ||
| 172 | 172 | 50 sqmm 3.5 core | BI01010001010000000000000515BI0100001283 | 10 | Rmt. |
| 173 | 173 | 150 sqmm 3.5 core | BI01010001010000000000000515BI0100001284 | 25 | Rmt. |
| 174 | 174 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. | BI01010001010000000000000515BI0100001285 | ||
| 175 | 175 | 50 sqmm 3.5 core | BI01010001010000000000000515BI0100001286 | 2 | Nos |
| 176 | 176 | 150 sqmm 3.5 core | BI01010001010000000000000515BI0100001287 | 1 | Nos |
| 177 | 177 | Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. | BI01010001010000000000000515BI0100001288 | ||
| 178 | 178 | 35 Sq.mm | BI01010001010000000000000515BI0100001289 | 8 | Nos |
| 179 | 179 | 150 Sq.mm | BI01010001010000000000000515BI0100001290 | 2 | Nos |
| 180 | 180 | SUBMERSSIBLE | BI01010001010000000000000515BI0100001291 | ||
| 181 | 181 | External W/S arrangements eith T.W.boring of 200 mm dia with 3.00 H.P.submersible pump including supply of all accessories starter,panel ets.& pipe arrangements etc. | BI01010001010000000000000515BI0100001292 | ||
| 182 | 182 | Drilling of 200 mm dia bore hole | BI01010001010000000000000515BI0100001293 | 75 | Mt. |
| 183 | 183 | Supply of 150 PVC pipe as per ISI 239 | BI01010001010000000000000515BI0100001294 | 60 | Mt. |
| 184 | 184 | Supply of 200 mm dia slotted PVC pipe | BI01010001010000000000000515BI0100001295 | 15 | Mt. |
| 185 | 185 | Supply and fixing of Nylon jali around the slotted pipes complete as required. | BI01010001010000000000000515BI0100001296 | 1 | Roll |
| 186 | 186 | Providing and packing of coarse sand/pea gravel around the pipe | BI01010001010000000000000515BI0100001297 | 1 | Job |
| 187 | 187 | Transport of boring tools other required equipment and installation at site | BI01010001010000000000000515BI0100001298 | 1 | Job |
| 188 | 188 | Supply of subemersible pump of Make KSB (cora) for 200 L/min. discharge a 50 m head with control panel support wire with etc complete. 3.00HP. | BI01010001010000000000000515BI0100001299 | 1 | Nos |
| 189 | 189 | Providing 3 core PVC insulated submersible pump cable (from pump panel to submersible pump) | BI01010001010000000000000515BI0100001300 | 90 | Rm |
| 190 | 190 | Providing and fixing of 50mm dia G.I. pipe complete with fitting and clamps including cutting and making good the walls etc. (submersible to ground LVL) | BI01010001010000000000000515BI0100001301 | 60 | Mt |
| 191 | 191 | Providing and fixing of 50 mm dia brass GATE valve with CI wheel of approved quality | BI01010001010000000000000515BI0100001302 | 1 | No |
| 192 | 192 | Lowering of 200mm dia PVC pipe in bore hole including cutting jointing etc complete. | BI01010001010000000000000515BI0100001303 | 75 | Mt |
| 193 | 193 | Supply and fixing of tube well accessories i.ee. Well clips clamp etc to complete the job. | BI01010001010000000000000515BI0100001304 | 1 | Job |
| 194 | 194 | Fixing testing and commisioning for erection and lowering of submersible pump 65mm dia GI pipe 3 core submersible copper cable upto pressure guage supporting clamps cable clips pressure guage connection line and all other accessories required for the proper completion of the work. | BI01010001010000000000000515BI0100001305 | 1 | Nos. |
| 195 | 195 | INTERLOCKING | BI01010001010000000000000515BI0100001306 | ||
| 196 | 196 | Excavation in foundation in ordinary soil (Loam,clay or sand) including lift up to 1.50 m and lead up to 30 m and including filling watering and ramming of excavated earth in to the space between the building and the side of foundation trenches. directed by the Engineer i/c with in a lead of 50m. | BI01010001010000000000000515BI0100001307 | 17.91 | SQM |
| 197 | 197 | Providing and laying in cement concrete 1:4:8 (1 cement :4 fine sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form-work,in foundation and floors. | BI01010001010000000000000515BI0100001308 | 35.83 | CUM |
| 198 | 198 | Class 150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001309 | 10.06 | CUM |
| 199 | 199 | Providing and laying of 80 mm thick Rubber Moulded Reflective Zig-Zag precast compressed Interlocking Concrete Block Pavements. | BI01010001010000000000000515BI0100001310 | 286.63 | SQM |
| 200 | 200 | SHED | BI01010001010000000000000515BI0100001311 | ||
| 201 | 201 | Excavation in foundation in ordinary soil (Loam clay or sand) including lift up to 1.5m and read up to 30m and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth and directed by Engineer in charge upto a distance of 30m from the foundation trenches including all T&P pbowereh and basket etc. complete. | BI01010001010000000000000515BI0100001312 | 38.38 | Cum. |
| 202 | 202 | Providing and laying in cement concrete1:4:8 (1 cement : 4coarse sand :8 graded Stone agregate 40 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation and floors. | BI01010001010000000000000515BI0100001313 | 25.22 | Cum. |
| 203 | 203 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. (5 miles) from the site of work and including watering, ramming, dressing etc rate to include cost of all materials, labour and T & P etc required for proper completion of the work. | BI01010001010000000000000515BI0100001314 | 28.8 | Cum. |
| 204 | 204 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Raft foundation excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item | BI01010001010000000000000515BI0100001315 | 6.1 | Cum. |
| 205 | 205 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Ground Beam excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item | BI01010001010000000000000515BI0100001316 | 6.51 | Cum. |
| 206 | 206 | Mild steel or iron in plain work such as Reinforced concrete or reinforced, brick Work (when not included in an over all Rates) wrought to required shape As necessary including bending for proper Completion of the work and including Supply of steel its wastage bend hooks And authorized over lapping shall be Measured up to floor two levels. | BI01010001010000000000000515BI0100001317 | 22.35 | Qtl. |
| 207 | 207 | First Class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortar in foundation and plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. (1:6 cement & coarse sand) | BI01010001010000000000000515BI0100001318 | 9.78 | Cum. |
| 208 | 208 | Mild steel or iron work in heavy sizes such as builtup gates record rack, roof work, gates etc. brought to required form including drilling holes revitting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc. and their fixing require for proper completion of the work. | BI01010001010000000000000515BI0100001319 | 4563.65 | Kg. |
| 209 | 209 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. | BI01010001010000000000000515BI0100001320 | 239.94 | Sqm. |
| 210 | 210 | Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete.Corrugated serrated adjustable ridges | BI01010001010000000000000515BI0100001321 | 25.8 | Rm. |
| 211 | 211 | Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins. | BI01010001010000000000000515BI0100001322 | 51.6 | Rm. |
| 212 | 212 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate | BI01010001010000000000000515BI0100001323 | 293.94 | Sqm. |
| 213 | 213 | 20mm thick plaster with 1:2 cement & coarse sand with all labour T&P complete. | BI01010001010000000000000515BI0100001324 | 21.6 | Sqm. |
| 214 | 214 | Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade, including supply of all material, labour and T&P etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001325 | 21.6 | Sqm. |
| 215 | 215 | Painting & Vernishing on iron work on small area two coat of approved superior quality ready mixed paint of clear synthetic vernish including supply of all materials labour and T&P etc. complete. | BI01010001010000000000000515BI0100001326 | 74.09 | Sqm. |
| 216 | 216 | Wiring points for light with 1.5 sqmm.FRLSH PVC insulated single core aluminium condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. | BI01010001010000000000000515BI0100001327 | 16 | Each |
| 217 | 217 | Addition when modular type switches etc are used in place of piono type switches etc. in various wiring points. | BI01010001010000000000000515BI0100001328 | ||
| 218 | 218 | Addition for light / fan points with modular type switch in place of piono type switch. | BI01010001010000000000000515BI0100001329 | 16 | Each |
| 219 | 219 | Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FRLSH PVC insulated multistranded copper conductor. | BI01010001010000000000000515BI0100001330 | ||
| 220 | 220 | cable as earth contunity wire etc. complete in all respects. | BI01010001010000000000000515BI0100001331 | 32 | Rmt |
| 221 | 221 | Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work . | BI01010001010000000000000515BI0100001332 | 24 | Rmt. |
| 222 | 222 | Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA) | BI01010001010000000000000515BI0100001333 | 16 | Each |
| 223 | 223 | SUBHEAD III-DISTIBUTION BOARD | BI01010001010000000000000515BI0100001334 | ||
| 224 | 224 | Supply and fixing of 6Amp to 32 Amp(10 KA) MCB in existing MCB, DB complete with connections as required. | BI01010001010000000000000515BI0100001335 | 2 | Each |
| 225 | 225 | Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. | BI01010001010000000000000515BI0100001336 | 2 | Each |
| 226 | 226 | Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. | BI01010001010000000000000515BI0100001337 | 2 | Each |
| 227 | 227 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects. | BI01010001010000000000000515BI0100001338 | 50 | Metre |
| 228 | 228 | Supply and fixing of one number 8 SWG G.I wire in 15mm dia. G.I pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. | BI01010001010000000000000515BI0100001339 | 2 | Metre |
| 229 | 229 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. | BI01010001010000000000000515BI0100001340 | ||
| 230 | 230 | 16 sqmm 2 core | BI01010001010000000000000515BI0100001341 | 30 | Rmt. |
| 231 | 231 | Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of E/I | BI01010001010000000000000515BI0100001342 | ||
| 232 | 232 | 16 sqmm 2core | BI01010001010000000000000515BI0100001343 | 2 | Each |
| 233 | 233 | S & F of 40 Amp TP MCB (10KA) C Curve. | BI01010001010000000000000515BI0100001344 | 2 | Each |
| 234 | 234 | SIGNAGE | BI01010001010000000000000515BI0100001345 | ||
| 235 | 235 | Retro Reflectorised Signs (Stainless Steel frame and post with one side signs) | BI01010001010000000000000515BI0100001346 | ||
| 236 | 236 | Supply and fixing of reflective sign board (single side) of size 1.50 x1.2 m retroreflective sheeting of HIP grade type -IV the board shall be fixed on 50mm SS 304 Grade pipe and reflective sheet on 4 mm thick ACP shhet of standard make as per MORTH specificaation . The Board shall be fixed using 2 man post 45x45x60 cm cement concrete foundation , The S.S. joint welding of SS pipe work shall be band and grinder property including bufting so an to give uniform shining at weded joints. the retro reflective sheeting shall be tested for 3 Year outdoor weathering test in indian condition as per IRC 67:2012 & proof of the same in form of government report shall be uploaded while quoting tender. | BI01010001010000000000000515BI0100001347 | 5 | No. |
| 237 | 237 | WALL ART | BI01010001010000000000000515BI0100001348 | ||
| 238 | 238 | Finishing Existing Temple and other walls with oil painting with smooth exterior paint. Complete in all detail and work. | BI01010001010000000000000515BI0100001349 | 180.25 | SQM |
| 239 | 239 | Finishing Existing Temple and other walls with mural painting with smooth exterior paint. Complete in all detail and work. | BI01010001010000000000000515BI0100001350 | 16.2 | SQM |
| 240 | 240 | 18watt SOLAR LED Street Light – IP-65 Supply, Installation Testing and Commissioning of 18watt SOLAR LED street Light on 7Mtr Hot dip Galvanize octagonal Pole with die cast aluminium housing with heat resistant toughened glass & IP65 protection with thermal management. High power LEDs with efficacy of more than 100lm/watt & CRI >70%. PWM Based charge controller with high efficacy & integrated high efficiency LED driver. Driver efficacy is >90%. 100wp Solar panel with High efficiency polycrystalline solar cell, solar panel with 25years of power generation capacity. 75Ah Tubular low maintenance batteries (VRLA/LMLA) for long life.\n \n | BI01010001010000000000000515BI0100001351 | 5 | Nos |
| 241 | 241 | GST will be Paid Extra. | BI01010001010000000000000515BI0100001352 |
AI Tender Summary
Tender Timeline
Mar 22, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Mar 24, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMar 24, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 24, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender