Nanded Waghala City Municipal Corporation has published Annual Maintenance And Repairs Of All Pumping Machineries In Area Of Nwcmc Nanded ( Amrc ) , Repairscentrifugal Couple Pump Set ( 3 H.P. To 250 H.P ) & Air Blower At All W.T.P. Pumping Machinary Within Corporation Limit In Nwcmc, Nanded ( Centrifuga. Submission Date for this Tender is 23-03-2021. Coats and Jackets Tenders in Nanded Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded (Centrifugal pump (3 H.P.)) |
| 2 | Complete dismantling of pump set |
| 3 | Providing & fixing shaft sleeve chuck nut. |
| 4 | Providing & fixing shaft sleve of G.M. |
| 5 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 6 | Providing & fixing pump shaft of S.S. 410 metel |
| 7 | impeller repair job including section site fixing back ring collar fitting. |
| 8 | Providing & fixing Neck ring of C.I. |
| 9 | Providing & fixing couple bolts withrubber bush as per sample. |
| 10 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 11 | Providing & fixing gland fixing bolt. |
| 12 | Providing & fixing water seperator of G.M. |
| 13 | Providing & fixing bearing housing with cover C.I. |
| 14 | Providing & fixing packing rubber sheet. |
| 15 | Providing & fixing gland rope. |
| 16 | Providing & fixingpump key EN-9 metel |
| 17 | Providing & fixingcouple set as per sample of C.I. |
| 18 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 19 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 20 | Providing & fixing ball bearing No. SKF 6413 |
| 21 | Repairs to shaft welding turning etc. |
| 22 | Pump fixing nut bolt. |
| 23 | Providing & fixing brass type bearing bush. |
| 24 | Providing & fixing oil ring for G.M. |
| 25 | Repairs to housing chamber. |
| 26 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 27 | Providing & fixing new G.M. metal impeller. |
| 28 | Providing & fixing Gate valve new size 1`` |
| 29 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 30 | Repair pump complete painting |
| 31 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (5 H.P.) |
| 32 | Complete dismantling of pump set |
| 33 | Providing & fixing shaft sleeve chuck nut. |
| 34 | Providing & fixing shaft sleve of G.M. |
| 35 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 36 | Providing & fixing pump shaft of S.S. 410 metel |
| 37 | impeller repair job including section site fixing back ring collar fitting. |
| 38 | Providing & fixing Neck ring of C.I. |
| 39 | Providing & fixing couple bolts withrubber bush as per sample. |
| 40 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 41 | Providing & fixing gland fixing bolt. |
| 42 | Providing & fixing water seperator of G.M. |
| 43 | Providing & fixing bearing housing with cover C.I. |
| 44 | Providing & fixing packing rubber sheet. |
| 45 | Providing & fixing gland rope. |
| 46 | Providing & fixingpump key EN-9 metel |
| 47 | Providing & fixingcouple set as per sample of C.I. |
| 48 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 49 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 50 | Providing & fixing ball bearing No. SKF 6413 |
| 51 | Repairs to shaft welding turning etc. |
| 52 | Pump fixing nut bolt. |
| 53 | Providing & fixing brass type bearing bush. |
| 54 | Providing & fixing oil ring for G.M. |
| 55 | Repairs to housing chamber. |
| 56 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 57 | Providing & fixing new G.M. metal impeller. |
| 58 | Providing & fixing Gate valve new size 1`` |
| 59 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 60 | Repair pump complete painting |
| 61 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (15 H.P.) |
| 62 | Complete dismantling of pump set |
| 63 | Providing & fixing shaft sleeve chuck nut. |
| 64 | Providing & fixing shaft sleve of G.M. |
| 65 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 66 | Providing & fixing pump shaft of S.S. 410 metel |
| 67 | impeller repair job including section site fixing back ring collar fitting. |
| 68 | Providing & fixing Neck ring of C.I. |
| 69 | Providing & fixing couple bolts withrubber bush as per sample. |
| 70 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 71 | Providing & fixing gland fixing bolt. |
| 72 | Providing & fixing water seperator of G.M. |
| 73 | Providing & fixing bearing housing with cover C.I. |
| 74 | Providing & fixing packing rubber sheet. |
| 75 | Providing & fixing gland rope. |
| 76 | Providing & fixingpump key EN-9 metel |
| 77 | Providing & fixingcouple set as per sample of C.I. |
| 78 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 79 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 80 | Providing & fixing ball bearing No. SKF 6413 |
| 81 | Repairs to shaft welding turning etc. |
| 82 | Pump fixing nut bolt. |
| 83 | Providing & fixing brass type bearing bush. |
| 84 | Providing & fixing oil ring for G.M. |
| 85 | Repairs to housing chamber. |
| 86 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 87 | Providing & fixing new G.M. metal impeller. |
| 88 | Providing & fixing Gate valve new size 1`` |
| 89 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 90 | Repair pump complete painting |
| 91 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (20 H.P.) |
| 92 | Complete dismantling of pump set |
| 93 | Providing & fixing shaft sleeve chuck nut. |
| 94 | Providing & fixing shaft sleve of G.M. |
| 95 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 96 | Providing & fixing pump shaft of S.S. 410 metel |
| 97 | impeller repair job including section site fixing back ring collar fitting. |
| 98 | Providing & fixing Neck ring of C.I. |
| 99 | Providing & fixing couple bolts withrubber bush as per sample. |
| 100 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 101 | Providing & fixing gland fixing bolt. |
| 102 | Providing & fixing water seperator of G.M. |
| 103 | Providing & fixing bearing housing with cover C.I. |
| 104 | Providing & fixing packing rubber sheet. |
| 105 | Providing & fixing gland rope. |
| 106 | Providing & fixingpump key EN-9 metel |
| 107 | Providing & fixingcouple set as per sample of C.I. |
| 108 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 109 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 110 | Providing & fixing ball bearing No. SKF 6413 |
| 111 | Repairs to shaft welding turning etc. |
| 112 | Pump fixing nut bolt. |
| 113 | Providing & fixing brass type bearing bush. |
| 114 | Providing & fixing oil ring for G.M. |
| 115 | Repairs to housing chamber. |
| 116 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 117 | Providing & fixing new G.M. metal impeller. |
| 118 | Providing & fixing Gate valve new size 1`` |
| 119 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 120 | Repair pump complete painting |
| 121 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (30 H.P.) |
| 122 | Complete dismantling of pump set |
| 123 | Providing & fixing shaft sleeve chuck nut. |
| 124 | Providing & fixing shaft sleve of G.M. |
| 125 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 126 | Providing & fixing pump shaft of S.S. 410 metel |
| 127 | impeller repair job including section site fixing back ring collar fitting. |
| 128 | Providing & fixing Neck ring of C.I. |
| 129 | Providing & fixing couple bolts withrubber bush as per sample. |
| 130 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 131 | Providing & fixing gland fixing bolt. |
| 132 | Providing & fixing water seperator of G.M. |
| 133 | Providing & fixing bearing housing with cover C.I. |
| 134 | Providing & fixing packing rubber sheet. |
| 135 | Providing & fixing gland rope. |
| 136 | Providing & fixingpump key EN-9 metel |
| 137 | Providing & fixingcouple set as per sample of C.I. |
| 138 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 139 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 140 | Providing & fixing ball bearing No. SKF 6413 |
| 141 | Repairs to shaft welding turning etc. |
| 142 | Pump fixing nut bolt. |
| 143 | Providing & fixing brass type bearing bush. |
| 144 | Providing & fixing oil ring for G.M. |
| 145 | Repairs to housing chamber. |
| 146 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 147 | Providing & fixing new G.M. metal impeller. |
| 148 | Providing & fixing Gate valve new size 1`` |
| 149 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 150 | Repair pump complete painting |
| 151 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (40 H.P.) |
| 152 | Complete dismantling of pump set |
| 153 | Providing & fixing shaft sleeve chuck nut. |
| 154 | Providing & fixing shaft sleve of G.M. |
| 155 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 156 | Providing & fixing pump shaft of S.S. 410 metel |
| 157 | impeller repair job including section site fixing back ring collar fitting. |
| 158 | Providing & fixing Neck ring of C.I. |
| 159 | Providing & fixing couple bolts withrubber bush as per sample. |
| 160 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 161 | Providing & fixing gland fixing bolt. |
| 162 | Providing & fixing water seperator of G.M. |
| 163 | Providing & fixing bearing housing with cover C.I. |
| 164 | Providing & fixing packing rubber sheet. |
| 165 | Providing & fixing gland rope. |
| 166 | Providing & fixingpump key EN-9 metel |
| 167 | Providing & fixingcouple set as per sample of C.I. |
| 168 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 169 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 170 | Providing & fixing ball bearing No. SKF 6413 |
| 171 | Repairs to shaft welding turning etc. |
| 172 | Pump fixing nut bolt. |
| 173 | Providing & fixing brass type bearing bush. |
| 174 | Providing & fixing oil ring for G.M. |
| 175 | Repairs to housing chamber. |
| 176 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 177 | Providing & fixing new G.M. metal impeller. |
| 178 | Providing & fixing Gate valve new size 1`` |
| 179 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 180 | Repair pump complete painting |
| 181 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (60 H.P.) |
| 182 | Complete dismantling of pump set |
| 183 | Providing & fixing shaft sleeve chuck nut. |
| 184 | Providing & fixing shaft sleve of G.M. |
| 185 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 186 | Providing & fixing pump shaft of S.S. 410 metel |
| 187 | impeller repair job including section site fixing back ring collar fitting. |
| 188 | Providing & fixing Neck ring of C.I. |
| 189 | Providing & fixing couple bolts withrubber bush as per sample. |
| 190 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 191 | Providing & fixing gland fixing bolt. |
| 192 | Providing & fixing water seperator of G.M. |
| 193 | Providing & fixing bearing housing with cover C.I. |
| 194 | Providing & fixing packing rubber sheet. |
| 195 | Providing & fixing gland rope. |
| 196 | Providing & fixingpump key EN-9 metel |
| 197 | Providing & fixingcouple set as per sample of C.I. |
| 198 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 199 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 200 | Providing & fixing ball bearing No. SKF 6413 |
| 201 | Repairs to shaft welding turning etc. |
| 202 | Pump fixing nut bolt. |
| 203 | Providing & fixing brass type bearing bush. |
| 204 | Providing & fixing oil ring for G.M. |
| 205 | Repairs to housing chamber. |
| 206 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 207 | Providing & fixing new G.M. metal impeller. |
| 208 | Providing & fixing Gate valve new size 1`` |
| 209 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 210 | Repair pump complete painting |
| 211 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (90 H.P.) |
| 212 | Complete dismantling of pump set |
| 213 | Providing & fixing shaft sleeve chuck nut. |
| 214 | Providing & fixing shaft sleve of G.M. |
| 215 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 216 | Providing & fixing pump shaft of S.S. 410 metel |
| 217 | impeller repair job including section site fixing back ring collar fitting. |
| 218 | Providing & fixing Neck ring of C.I. |
| 219 | Providing & fixing couple bolts withrubber bush as per sample. |
| 220 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 221 | Providing & fixing gland fixing bolt. |
| 222 | Providing & fixing water seperator of G.M. |
| 223 | Providing & fixing bearing housing with cover C.I. |
| 224 | Providing & fixing packing rubber sheet. |
| 225 | Providing & fixing gland rope. |
| 226 | Providing & fixingpump key EN-9 metel |
| 227 | Providing & fixingcouple set as per sample of C.I. |
| 228 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 229 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 230 | Providing & fixing ball bearing No. SKF 6413 |
| 231 | Repairs to shaft welding turning etc. |
| 232 | Pump fixing nut bolt. |
| 233 | Providing & fixing brass type bearing bush. |
| 234 | Providing & fixing oil ring for G.M. |
| 235 | Repairs to housing chamber. |
| 236 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 237 | Providing & fixing new G.M. metal impeller. |
| 238 | Providing & fixing Gate valve new size 1`` |
| 239 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 240 | Repair pump complete painting |
| 241 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (120 H.P.) |
| 242 | Complete dismantling of pump set |
| 243 | Providing & fixing shaft sleeve chuck nut. |
| 244 | Providing & fixing shaft sleve of G.M. |
| 245 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 246 | Providing & fixing pump shaft of S.S. 410 metel |
| 247 | impeller repair job including section site fixing back ring collar fitting. |
| 248 | Providing & fixing Neck ring of C.I. |
| 249 | Providing & fixing couple bolts withrubber bush as per sample. |
| 250 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 251 | Providing & fixing gland fixing bolt. |
| 252 | Providing & fixing water seperator of G.M. |
| 253 | Providing & fixing bearing housing with cover C.I. |
| 254 | Providing & fixing packing rubber sheet. |
| 255 | Providing & fixing gland rope. |
| 256 | Providing & fixingpump key EN-9 metel |
| 257 | Providing & fixingcouple set as per sample of C.I. |
| 258 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 259 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 260 | Providing & fixing ball bearing No. SKF 6413 |
| 261 | Repairs to shaft welding turning etc. |
| 262 | Pump fixing nut bolt. |
| 263 | Providing & fixing brass type bearing bush. |
| 264 | Providing & fixing oil ring for G.M. |
| 265 | Repairs to housing chamber. |
| 266 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 267 | Providing & fixing new G.M. metal impeller. |
| 268 | Providing & fixing Gate valve new size 1`` |
| 269 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 270 | Repair pump complete painting |
| 271 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (150 H.P.) |
| 272 | Complete dismantling of pump set |
| 273 | Providing & fixing shaft sleeve chuck nut. |
| 274 | Providing & fixing shaft sleve of G.M. |
| 275 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 276 | Providing & fixing pump shaft of S.S. 410 metel |
| 277 | impeller repair job including section site fixing back ring collar fitting. |
| 278 | Providing & fixing Neck ring of C.I. |
| 279 | Providing & fixing couple bolts withrubber bush as per sample. |
| 280 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 281 | Providing & fixing gland fixing bolt. |
| 282 | Providing & fixing water seperator of G.M. |
| 283 | Providing & fixing bearing housing with cover C.I. |
| 284 | Providing & fixing packing rubber sheet. |
| 285 | Providing & fixing gland rope. |
| 286 | Providing & fixingpump key EN-9 metel |
| 287 | Providing & fixingcouple set as per sample of C.I. |
| 288 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 289 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 290 | Providing & fixing ball bearing No. SKF 6413 |
| 291 | Repairs to shaft welding turning etc. |
| 292 | Pump fixing nut bolt. |
| 293 | Providing & fixing brass type bearing bush. |
| 294 | Providing & fixing oil ring for G.M. |
| 295 | Repairs to housing chamber. |
| 296 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 297 | Providing & fixing new G.M. metal impeller. |
| 298 | Providing & fixing Gate valve new size 1`` |
| 299 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 300 | Repair pump complete painting |
| 301 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (170 H.P.) |
| 302 | Complete dismantling of pump set |
| 303 | Providing & fixing shaft sleeve chuck nut. |
| 304 | Providing & fixing shaft sleve of G.M. |
| 305 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 306 | Providing & fixing pump shaft of S.S. 410 metel |
| 307 | impeller repair job including section site fixing back ring collar fitting. |
| 308 | Providing & fixing Neck ring of C.I. |
| 309 | Providing & fixing couple bolts withrubber bush as per sample. |
| 310 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 311 | Providing & fixing gland fixing bolt. |
| 312 | Providing & fixing water seperator of G.M. |
| 313 | Providing & fixing bearing housing with cover C.I. |
| 314 | Providing & fixing packing rubber sheet. |
| 315 | Providing & fixing gland rope. |
| 316 | Providing & fixingpump key EN-9 metel |
| 317 | Providing & fixingcouple set as per sample of C.I. |
| 318 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 319 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 320 | Providing & fixing ball bearing No. SKF 6413 |
| 321 | Repairs to shaft welding turning etc. |
| 322 | Pump fixing nut bolt. |
| 323 | Providing & fixing brass type bearing bush. |
| 324 | Providing & fixing oil ring for G.M. |
| 325 | Repairs to housing chamber. |
| 326 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 327 | Providing & fixing new G.M. metal impeller. |
| 328 | Providing & fixing Gate valve new size 1`` |
| 329 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 330 | Repair pump complete painting |
| 331 | RepairsCentrifugal couple pump set (3 H.P. to 250 H.P) & Air Blower at all W.T.P. Pumping machinary within Corporation Limit in NWCMC,Nanded Centrifugal pump (250 H.P.) |
| 332 | Complete dismantling of pump set |
| 333 | Providing & fixing shaft sleeve chuck nut. |
| 334 | Providing & fixing shaft sleve of G.M. |
| 335 | Providing & fixing ball bearing 6302, 6309 SKF NCB 345 |
| 336 | Providing & fixing pump shaft of S.S. 410 metel |
| 337 | impeller repair job including section site fixing back ring collar fitting. |
| 338 | Providing & fixing Neck ring of C.I. |
| 339 | Providing & fixing couple bolts withrubber bush as per sample. |
| 340 | Providing & fixing complete gland C.I. (1`` of 2nd Nos.) |
| 341 | Providing & fixing gland fixing bolt. |
| 342 | Providing & fixing water seperator of G.M. |
| 343 | Providing & fixing bearing housing with cover C.I. |
| 344 | Providing & fixing packing rubber sheet. |
| 345 | Providing & fixing gland rope. |
| 346 | Providing & fixingpump key EN-9 metel |
| 347 | Providing & fixingcouple set as per sample of C.I. |
| 348 | Complete reinstallations of repaired pump set with test & trial on full load. |
| 349 | Transportations charges including loading / unloading from site to workshop and back to site. |
| 350 | Providing & fixing ball bearing No. SKF 6413 |
| 351 | Repairs to shaft welding turning etc. |
| 352 | Pump fixing nut bolt. |
| 353 | Providing & fixing brass type bearing bush. |
| 354 | Providing & fixing oil ring for G.M. |
| 355 | Repairs to housing chamber. |
| 356 | Repairs to impellar housing Necking ablong seat welding & turning etc. |
| 357 | Providing & fixing new G.M. metal impeller. |
| 358 | Providing & fixing Gate valve new size 1`` |
| 359 | Providing & fixing nut bolt with washer 3/4`` x 4`` |
| 360 | Repair pump complete painting |
| 361 | RepairsAir Blower at W.T.P. in Corporation limit, NWCMC, Nanded Air Blower(20 HP) |
| 362 | Complete dismantling of air blower at W.T.P. |
| 363 | Providing & Repairing Air blower shaft two side welding turning bearing seat as per size. |
| 364 | Providing & fixing pinion small gear new turning teeth making complete as per size. |
| 365 | Providing & fixing main drive gear new turning making complete as per size. |
| 366 | Providing & fixing new ball bering 6309 |
| 367 | Providing & fixing new ball bering 6311 |
| 368 | Air Blower fiber blade new fittingas per size. |
| 369 | Air Blower side cover new bearing seat & oil seat complete repairing as per size. |
| 370 | Highlet packing sheet for air bloweras per size. |
| 371 | Air Blower V belt as per sample. |
| 372 | Air Blower transporting charges. |
| 373 | Complete air blower fitting with test & trial. |
| 374 | RepairsAir Blower at W.T.P. in Corporation limit, NWCMC, Nanded Air Blower(30 HP) |
| 375 | Complete dismantling of air blower at W.T.P. |
| 376 | Providing & Repairing Air blower shaft two side welding turning bearing seat as per size. |
| 377 | Providing & fixing pinion small gear new turning teeth making complete as per size. |
| 378 | Providing & fixing main drive gear new turning making complete as per size. |
| 379 | Providing & fixing new ball bering 6309 |
| 380 | Providing & fixing new ball bering 6311 |
| 381 | Air Blower fiber blade new fittingas per size. |
| 382 | Air Blower side cover new bearing seat & oil seat complete repairing as per size. |
| 383 | Highlet packing sheet for air bloweras per size. |
| 384 | Air Blower V belt as per sample. |
| 385 | Air Blower transporting charges. |
| 386 | Complete air blower fitting with test & trial. |
| 387 | Repairs V.T. Pump (120 H.P.to 375 H.P.) (Water Lubricant) Raw Water & W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded V.T. Pump (375 H.P.) |
| 388 | Removing of Motor__________ H.P. V.T. pump |
| 389 | Dismentling column pipes & discharge head of Water lub V.T. pump |
| 390 | Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed. |
| 391 | Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed. |
| 392 | Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed. |
| 393 | Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed. |
| 394 | Providing & fixing colum line S.S. metel nut boltssize 1` x 6``with washers. |
| 395 | Providing & fixing colum line S.S. metel nut boltssize 3/4` x 4``with washers. |
| 396 | Providing & fixing col. Pipe jointing rubber `O` Ring. |
| 397 | Line shaft SS. Sleve turning, grinding & polishing & thoughing as per size. |
| 398 | Top shaft S.S. sleeve turning, grinding & polishing & thoughing as per size. |
| 399 | Providing & fixing pump gland for C.I. |
| 400 | Repair impaller Neck Ring for G.M. as per size. |
| 401 | Repair to bowlsNeck Ring for G.M. as per size. |
| 402 | Bowl assembly & column Pipe cleaning. |
| 403 | Bowl assembly dismentling & full cleaning as directed. |
| 404 | Bowl assembly ressembled complete as directed. |
| 405 | Re-erecting repaired pump with giving test & trial of V.T. pump water lub. Including bowl assembly & deschargehead etc. complete as directed. |
| 406 | Re-installation of ____________ H.P.V.T. motor. |
| 407 | Transportation charges including loading & unloading from site to workshop & back to site. |
| 408 | Providing & fixing S.S.410 glandbush now size comp. as per size.. |
| 409 | Providing & fixing M.S. coupling as per size |
| 410 | Providing & fixing new S.S.Impeller as per old sample. |
| 411 | Providing & fixing bowl assembly bottem bowl G.M.bush. |
| 412 | Providing & fixing bowl assembly top bowl G.M. bush. |
| 413 | Providing & fixing new bowl assembly shaft S.S. 410 metel as per size. |
| 414 | Providing & moulding C.I. spider (bearning retainer) heavyduty as per size. |
| 415 | Providing & moulding new gun metel gland bush as per size. |
| 416 | Thurust bearing new 29418 for bearing assembly. |
| 417 | Ball bearing new 6020 for bearing assembly. |
| 418 | Providing new bearing assembly chamber M.S. bush for Oil level. |
| 419 | Providing new bearing adapter for bearing assembly as per size. . |
| 420 | Providing & moulding C.I. link assembly with rubber bushes as per sample. |
| 421 | Providing & fixing high tension bolt size3/4 x 90 mm with nut & water. |
| 422 | Repairing link assembly pully drilling & taping as per size. |
| 423 | Link assembly Nut Bolt size 16X60mm |
| 424 | Oil lubricantfor V.T. pump oil chamber. |
| 425 | Rubber packing for oil chamber |
| 426 | Providing & fixing Gate valve |
| 427 | AP - 3 bearing grease. |
| 428 | Providing, fixing M.S. link assembly couple as per sample . |
| 429 | Providing, fixing M.S. Column pipe with flange as per sample . |
| 430 | Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample |
| 431 | Providing, fixing top shaft in materialSS410 as per sample . |
| 432 | Providing, fixing line shaft in material SS410 as per sample . |
| 433 | Repairs V.T. Pump (120 H.P.to 375 H.P.) (Water Lubricant) Raw Water & W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded V.T. Pump (250 H.P.) |
| 434 | Removing of Motor__________ H.P. V.T. pump |
| 435 | Dismentling column pipes & discharge head of Water lub V.T. pump |
| 436 | Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed. |
| 437 | Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed. |
| 438 | Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed. |
| 439 | Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed. |
| 440 | Providing & fixing colum line S.S. metel nut boltssize 1` x 6``with washers. |
| 441 | Providing & fixing colum line S.S. metel nut boltssize 3/4` x 4``with washers. |
| 442 | Providing & fixing col. Pipe jointing rubber `O` Ring. |
| 443 | Line shaft SS. Sleve turning, grinding & polishing & thoughing as per size. |
| 444 | Top shaft S.S. sleeve turning, grinding & polishing & thoughing as per size. |
| 445 | Providing & fixing pump gland for C.I. |
| 446 | Repair impaller Neck Ring for G.M. as per size. |
| 447 | Repair to bowlsNeck Ring for G.M. as per size. |
| 448 | Bowl assembly & column Pipe cleaning. |
| 449 | Bowl assembly dismentling & full cleaning as directed. |
| 450 | Bowl assembly ressembled complete as directed. |
| 451 | Re-erecting repaired pump with giving test & trial of V.T. pump water lub. Including bowl assembly & deschargehead etc. complete as directed. |
| 452 | Re-installation of ____________ H.P.V.T. motor. |
| 453 | Transportation charges including loading & unloading from site to workshop & back to site. |
| 454 | Providing & fixing S.S.410 glandbush now size comp. as per size.. |
| 455 | Providing & fixing M.S. coupling as per size |
| 456 | Providing & fixing new S.S.Impeller as per old sample. |
| 457 | Providing & fixing bowl assembly bottem bowl G.M.bush. |
| 458 | Providing & fixing bowl assembly top bowl G.M. bush. |
| 459 | Providing & fixing new bowl assembly shaft S.S. 410 metel as per size. |
| 460 | Providing & moulding C.I. spider (bearning retainer) heavyduty as per size. |
| 461 | Providing & moulding new gun metel gland bush as per size. |
| 462 | Thurust bearing new 29418 for bearing assembly. |
| 463 | Ball bearing new 6020 for bearing assembly. |
| 464 | Providing new bearing assembly chamber M.S. bush for Oil level. |
| 465 | Providing new bearing adapter for bearing assembly as per size. . |
| 466 | Providing & moulding C.I. link assembly with rubber bushes as per sample. |
| 467 | Providing & fixing high tension bolt size3/4 x 90 mm with nut & water. |
| 468 | Repairing link assembly pully drilling & taping as per size. |
| 469 | Link assembly Nut Bolt size 16X60mm |
| 470 | Oil lubricantfor V.T. pump oil chamber. |
| 471 | Rubber packing for oil chamber |
| 472 | Providing & fixing Gate valve |
| 473 | AP - 3 bearing grease. |
| 474 | Providing, fixing M.S. link assembly couple as per sample . |
| 475 | Providing, fixing M.S. Column pipe with flange as per sample . |
| 476 | Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample |
| 477 | Providing, fixing top shaft in materialSS410 as per sample . |
| 478 | Providing, fixing line shaft in material SS410 as per sample . |
| 479 | Repairs V.T. Pump (120 H.P.to 375 H.P.) (Water Lubricant) Raw Water & W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded V.T. Pump (220 H.P.) |
| 480 | Removing of Motor__________ H.P. V.T. pump |
| 481 | Dismentling column pipes & discharge head of Water lub V.T. pump |
| 482 | Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed. |
| 483 | Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed. |
| 484 | Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed. |
| 485 | Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed. |
| 486 | Providing & fixing colum line S.S. metel nut boltssize 1` x 6``with washers. |
| 487 | Providing & fixing colum line S.S. metel nut boltssize 3/4` x 4``with washers. |
| 488 | Providing & fixing col. Pipe jointing rubber `O` Ring. |
| 489 | Line shaft SS. Sleve turning, grinding & polishing & thoughing as per size. |
| 490 | Top shaft S.S. sleeve turning, grinding & polishing & thoughing as per size. |
| 491 | Providing & fixing pump gland for C.I. |
| 492 | Repair impaller Neck Ring for G.M. as per size. |
| 493 | Repair to bowlsNeck Ring for G.M. as per size. |
| 494 | Bowl assembly & column Pipe cleaning. |
| 495 | Bowl assembly dismentling & full cleaning as directed. |
| 496 | Bowl assembly ressembled complete as directed. |
| 497 | Re-erecting repaired pump with giving test & trial of V.T. pump water lub. Including bowl assembly & deschargehead etc. complete as directed. |
| 498 | Re-installation of ____________ H.P.V.T. motor. |
| 499 | Transportation charges including loading & unloading from site to workshop & back to site. |
| 500 | Providing & fixing S.S.410 glandbush now size comp. as per size.. |
| 501 | Providing & fixing M.S. coupling as per size |
| 502 | Providing & fixing new S.S.Impeller as per old sample. |
| 503 | Providing & fixing bowl assembly bottem bowl G.M.bush. |
| 504 | Providing & fixing bowl assembly top bowl G.M. bush. |
| 505 | Providing & fixing new bowl assembly shaft S.S. 410 metel as per size. |
| 506 | Providing & moulding C.I. spider (bearning retainer) heavyduty as per size. |
| 507 | Providing & moulding new gun metel gland bush as per size. |
| 508 | Thurust bearing new 29418 for bearing assembly. |
| 509 | Ball bearing new 6020 for bearing assembly. |
| 510 | Providing new bearing assembly chamber M.S. bush for Oil level. |
| 511 | Providing new bearing adapter for bearing assembly as per size. . |
| 512 | Providing & moulding C.I. link assembly with rubber bushes as per sample. |
| 513 | Providing & fixing high tension bolt size3/4 x 90 mm with nut & water. |
| 514 | Repairing link assembly pully drilling & taping as per size. |
| 515 | Link assembly Nut Bolt size 16X60mm |
| 516 | Oil lubricantfor V.T. pump oil chamber. |
| 517 | Rubber packing for oil chamber |
| 518 | Providing & fixing Gate valve |
| 519 | AP - 3 bearing grease. |
| 520 | Providing, fixing M.S. link assembly couple as per sample . |
| 521 | Providing, fixing M.S. Column pipe with flange as per sample . |
| 522 | Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample |
| 523 | Providing, fixing top shaft in materialSS410 as per sample . |
| 524 | Providing, fixing line shaft in material SS410 as per sample . |
| 525 | Repairs V.T. Pump (120 H.P.to 375 H.P.) (Water Lubricant) Raw Water & W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded V.T. Pump (177 H.P.) |
| 526 | Removing of Motor__________ H.P. V.T. pump |
| 527 | Dismentling column pipes & discharge head of Water lub V.T. pump |
| 528 | Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed. |
| 529 | Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed. |
| 530 | Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed. |
| 531 | Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed. |
| 532 | Providing & fixing colum line S.S. metel nut boltssize 1` x 6``with washers. |
| 533 | Providing & fixing colum line S.S. metel nut boltssize 3/4` x 4``with washers. |
| 534 | Providing & fixing col. Pipe jointing rubber `O` Ring. |
| 535 | Line shaft SS. Sleve turning, grinding & polishing & thoughing as per size. |
| 536 | Top shaft S.S. sleeve turning, grinding & polishing & thoughing as per size. |
| 537 | Providing & fixing pump gland for C.I. |
| 538 | Repair impaller Neck Ring for G.M. as per size. |
| 539 | Repair to bowlsNeck Ring for G.M. as per size. |
| 540 | Bowl assembly & column Pipe cleaning. |
| 541 | Bowl assembly dismentling & full cleaning as directed. |
| 542 | Bowl assembly ressembled complete as directed. |
| 543 | Re-erecting repaired pump with giving test & trial of V.T. pump water lub. Including bowl assembly & deschargehead etc. complete as directed. |
| 544 | Re-installation of ____________ H.P.V.T. motor. |
| 545 | Transportation charges including loading & unloading from site to workshop & back to site. |
| 546 | Providing & fixing S.S.410 glandbush now size comp. as per size.. |
| 547 | Providing & fixing M.S. coupling as per size |
| 548 | Providing & fixing new S.S.Impeller as per old sample. |
| 549 | Providing & fixing bowl assembly bottem bowl G.M.bush. |
| 550 | Providing & fixing bowl assembly top bowl G.M. bush. |
| 551 | Providing & fixing new bowl assembly shaft S.S. 410 metel as per size. |
| 552 | Providing & moulding C.I. spider (bearning retainer) heavyduty as per size. |
| 553 | Providing & moulding new gun metel gland bush as per size. |
| 554 | Thurust bearing new 29418 for bearing assembly. |
| 555 | Ball bearing new 6020 for bearing assembly. |
| 556 | Providing new bearing assembly chamber M.S. bush for Oil level. |
| 557 | Providing new bearing adapter for bearing assembly as per size. . |
| 558 | Providing & moulding C.I. link assembly with rubber bushes as per sample. |
| 559 | Providing & fixing high tension bolt size3/4 x 90 mm with nut & water. |
| 560 | Repairing link assembly pully drilling & taping as per size. |
| 561 | Link assembly Nut Bolt size 16X60mm |
| 562 | Oil lubricantfor V.T. pump oil chamber. |
| 563 | Rubber packing for oil chamber |
| 564 | Providing & fixing Gate valve |
| 565 | AP - 3 bearing grease. |
| 566 | Providing, fixing M.S. link assembly couple as per sample . |
| 567 | Providing, fixing M.S. Column pipe with flange as per sample . |
| 568 | Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample |
| 569 | Providing, fixing top shaft in materialSS410 as per sample . |
| 570 | Providing, fixing line shaft in material SS410 as per sample . |
| 571 | Repairs V.T. Pump (120 H.P.to 375 H.P.) (Water Lubricant) Raw Water & W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded V.T. Pump (150 H.P.) |
| 572 | Removing of Motor__________ H.P. V.T. pump |
| 573 | Dismentling column pipes & discharge head of Water lub V.T. pump |
| 574 | Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed. |
| 575 | Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed. |
| 576 | Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed. |
| 577 | Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed. |
| 578 | Providing & fixing colum line S.S. metel nut boltssize 1` x 6``with washers. |
| 579 | Providing & fixing colum line S.S. metel nut boltssize 3/4` x 4``with washers. |
| 580 | Providing & fixing col. Pipe jointing rubber `O` Ring. |
| 581 | Line shaft SS. Sleve turning, grinding & polishing & thoughing as per size. |
| 582 | Top shaft S.S. sleeve turning, grinding & polishing & thoughing as per size. |
| 583 | Providing & fixing pump gland for C.I. |
| 584 | Repair impaller Neck Ring for G.M. as per size. |
| 585 | Repair to bowlsNeck Ring for G.M. as per size. |
| 586 | Bowl assembly & column Pipe cleaning. |
| 587 | Bowl assembly dismentling & full cleaning as directed. |
| 588 | Bowl assembly ressembled complete as directed. |
| 589 | Re-erecting repaired pump with giving test & trial of V.T. pump water lub. Including bowl assembly & deschargehead etc. complete as directed. |
| 590 | Re-installation of ____________ H.P.V.T. motor. |
| 591 | Transportation charges including loading & unloading from site to workshop & back to site. |
| 592 | Providing & fixing S.S.410 glandbush now size comp. as per size.. |
| 593 | Providing & fixing M.S. coupling as per size |
| 594 | Providing & fixing new S.S.Impeller as per old sample. |
| 595 | Providing & fixing bowl assembly bottem bowl G.M.bush. |
| 596 | Providing & fixing bowl assembly top bowl G.M. bush. |
| 597 | Providing & fixing new bowl assembly shaft S.S. 410 metel as per size. |
| 598 | Providing & moulding C.I. spider (bearning retainer) heavyduty as per size. |
| 599 | Providing & moulding new gun metel gland bush as per size. |
| 600 | Thurust bearing new 29418 for bearing assembly. |
| 601 | Ball bearing new 6020 for bearing assembly. |
| 602 | Providing new bearing assembly chamber M.S. bush for Oil level. |
| 603 | Providing new bearing adapter for bearing assembly as per size. . |
| 604 | Providing & moulding C.I. link assembly with rubber bushes as per sample. |
| 605 | Providing & fixing high tension bolt size3/4 x 90 mm with nut & water. |
| 606 | Repairing link assembly pully drilling & taping as per size. |
| 607 | Link assembly Nut Bolt size 16X60mm |
| 608 | Oil lubricantfor V.T. pump oil chamber. |
| 609 | Rubber packing for oil chamber |
| 610 | Providing & fixing Gate valve |
| 611 | AP - 3 bearing grease. |
| 612 | Providing, fixing M.S. link assembly couple as per sample . |
| 613 | Providing, fixing M.S. Column pipe with flange as per sample . |
| 614 | Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample |
| 615 | Providing, fixing top shaft in materialSS410 as per sample . |
| 616 | Providing, fixing line shaft in material SS410 as per sample . |
| 617 | Repairs V.T. Pump (120 H.P.to 375 H.P.) (Water Lubricant) Raw Water & W.T.Plant Pumping Station within Corporation Limit in NWCMC,Nanded V.T. Pump (120 H.P.) |
| 618 | Removing of Motor__________ H.P. V.T. pump |
| 619 | Dismentling column pipes & discharge head of Water lub V.T. pump |
| 620 | Providing & fixing bowl assembly stage bushes, stealcoated rubber bush size 80 x 100 x 140 mm complete as directed. |
| 621 | Providing & fixing line shaft rubber bush steal coated size 65 x 90 x 160 mm with fitting as directed. |
| 622 | Providing & fixing line shaft S.S. sleeve size 55 x 65 x 210 mm for S.S. 410 matal as directed. |
| 623 | Providing & fixing bowl assembly S.S. sleeve size 80 x 100 x 145 mm as directed. |
| 624 | Providing & fixing colum line S.S. metel nut boltssize 1` x 6``with washers. |
| 625 | Providing & fixing colum line S.S. metel nut boltssize 3/4` x 4``with washers. |
| 626 | Providing & fixing col. Pipe jointing rubber `O` Ring. |
| 627 | Line shaft SS. Sleve turning, grinding & polishing & thoughing as per size. |
| 628 | Top shaft S.S. sleeve turning, grinding & polishing & thoughing as per size. |
| 629 | Providing & fixing pump gland for C.I. |
| 630 | Repair impaller Neck Ring for G.M. as per size. |
| 631 | Repair to bowlsNeck Ring for G.M. as per size. |
| 632 | Bowl assembly & column Pipe cleaning. |
| 633 | Bowl assembly dismentling & full cleaning as directed. |
| 634 | Bowl assembly ressembled complete as directed. |
| 635 | Re-erecting repaired pump with giving test & trial of V.T. pump water lub. Including bowl assembly & deschargehead etc. complete as directed. |
| 636 | Re-installation of ____________ H.P.V.T. motor. |
| 637 | Transportation charges including loading & unloading from site to workshop & back to site. |
| 638 | Providing & fixing S.S.410 glandbush now size comp. as per size.. |
| 639 | Providing & fixing M.S. coupling as per size |
| 640 | Providing & fixing new S.S.Impeller as per old sample. |
| 641 | Providing & fixing bowl assembly bottem bowl G.M.bush. |
| 642 | Providing & fixing bowl assembly top bowl G.M. bush. |
| 643 | Providing & fixing new bowl assembly shaft S.S. 410 metel as per size. |
| 644 | Providing & moulding C.I. spider (bearning retainer) heavyduty as per size. |
| 645 | Providing & moulding new gun metel gland bush as per size. |
| 646 | Thurust bearing new 29418 for bearing assembly. |
| 647 | Ball bearing new 6020 for bearing assembly. |
| 648 | Providing new bearing assembly chamber M.S. bush for Oil level. |
| 649 | Providing new bearing adapter for bearing assembly as per size. . |
| 650 | Providing & moulding C.I. link assembly with rubber bushes as per sample. |
| 651 | Providing & fixing high tension bolt size3/4 x 90 mm with nut & water. |
| 652 | Repairing link assembly pully drilling & taping as per size. |
| 653 | Link assembly Nut Bolt size 16X60mm |
| 654 | Oil lubricantfor V.T. pump oil chamber. |
| 655 | Rubber packing for oil chamber |
| 656 | Providing & fixing Gate valve |
| 657 | AP - 3 bearing grease. |
| 658 | Providing, fixing M.S. link assembly couple as per sample . |
| 659 | Providing, fixing M.S. Column pipe with flange as per sample . |
| 660 | Providing, fixing V.T. Pump at bottom M.S. Strainer as per sample |
| 661 | Providing, fixing top shaft in materialSS410 as per sample . |
| 662 | Providing, fixing line shaft in material SS410 as per sample . |
| 663 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 80 mm dia |
| 664 | Dismentling of sluice valve at existing spot. |
| 665 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 666 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 667 | Making sluice valve flap chuck nut bracket as per old sample. |
| 668 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 669 | Sluice valve gland body reboring & newbush fitting. |
| 670 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 671 | Sluice valve drive spinner new providing. |
| 672 | Providing & fixing 4mm thick rubber packing. |
| 673 | Refitting sluice valve test & trial on load at site. |
| 674 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 100 mm dia |
| 675 | Dismentling of sluice valve at existing spot. |
| 676 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 677 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 678 | Making sluice valve flap chuck nut bracket as per old sample. |
| 679 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 680 | Sluice valve gland body reboring & newbush fitting. |
| 681 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 682 | Sluice valve drive spinner new providing. |
| 683 | Providing & fixing 4mm thick rubber packing. |
| 684 | Refitting sluice valve test & trial on load at site. |
| 685 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 150 mm dia |
| 686 | Dismentling of sluice valve at existing spot. |
| 687 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 688 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 689 | Making sluice valve flap chuck nut bracket as per old sample. |
| 690 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 691 | Sluice valve gland body reboring & newbush fitting. |
| 692 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 693 | Sluice valve drive spinner new providing. |
| 694 | Providing & fixing 4mm thick rubber packing. |
| 695 | Refitting sluice valve test & trial on load at site. |
| 696 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 200 mm dia |
| 697 | Dismentling of sluice valve at existing spot. |
| 698 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 699 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 700 | Making sluice valve flap chuck nut bracket as per old sample. |
| 701 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 702 | Sluice valve gland body reboring & newbush fitting. |
| 703 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 704 | Sluice valve drive spinner new providing. |
| 705 | Providing & fixing 4mm thick rubber packing. |
| 706 | Refitting sluice valve test & trial on load at site. |
| 707 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 250 mm dia |
| 708 | Dismentling of sluice valve at existing spot. |
| 709 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 710 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 711 | Making sluice valve flap chuck nut bracket as per old sample. |
| 712 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 713 | Sluice valve gland body reboring & newbush fitting. |
| 714 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 715 | Sluice valve drive spinner new providing. |
| 716 | Providing & fixing 4mm thick rubber packing. |
| 717 | Refitting sluice valve test & trial on load at site. |
| 718 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 300 mm dia |
| 719 | Dismentling of sluice valve at existing spot. |
| 720 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 721 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 722 | Making sluice valve flap chuck nut bracket as per old sample. |
| 723 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 724 | Sluice valve gland body reboring & newbush fitting. |
| 725 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 726 | Sluice valve drive spinner new providing. |
| 727 | Providing & fixing 4mm thick rubber packing. |
| 728 | Refitting sluice valve test & trial on load at site. |
| 729 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 400 mm dia |
| 730 | Dismentling of sluice valve at existing spot. |
| 731 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 732 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 733 | Making sluice valve flap chuck nut bracket as per old sample. |
| 734 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 735 | Sluice valve gland body reboring & newbush fitting. |
| 736 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 737 | Sluice valve drive spinner new providing. |
| 738 | Providing & fixing 4mm thick rubber packing. |
| 739 | Refitting sluice valve test & trial on load at site. |
| 740 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 450 mm dia |
| 741 | Dismentling of sluice valve at existing spot. |
| 742 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 743 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 744 | Making sluice valve flap chuck nut bracket as per old sample. |
| 745 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 746 | Sluice valve gland body reboring & newbush fitting. |
| 747 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 748 | Sluice valve drive spinner new providing. |
| 749 | Providing & fixing 4mm thick rubber packing. |
| 750 | Refitting sluice valve test & trial on load at site. |
| 751 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 600 mm dia |
| 752 | Dismentling of sluice valve at existing spot. |
| 753 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 754 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 755 | Making sluice valve flap chuck nut bracket as per old sample. |
| 756 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 757 | Sluice valve gland body reboring & newbush fitting. |
| 758 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 759 | Sluice valve drive spinner new providing. |
| 760 | Providing & fixing 4mm thick rubber packing. |
| 761 | Refitting sluice valve test & trial on load at site. |
| 762 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 700 mm dia |
| 763 | Dismentling of sluice valve at existing spot. |
| 764 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 765 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 766 | Making sluice valve flap chuck nut bracket as per old sample. |
| 767 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 768 | Sluice valve gland body reboring & newbush fitting. |
| 769 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 770 | Sluice valve drive spinner new providing. |
| 771 | Providing & fixing 4mm thick rubber packing. |
| 772 | Refitting sluice valve test & trial on load at site. |
| 773 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 750 mm dia |
| 774 | Dismentling of sluice valve at existing spot. |
| 775 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 776 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 777 | Making sluice valve flap chuck nut bracket as per old sample. |
| 778 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 779 | Sluice valve gland body reboring & newbush fitting. |
| 780 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 781 | Sluice valve drive spinner new providing. |
| 782 | Providing & fixing 4mm thick rubber packing. |
| 783 | Refitting sluice valve test & trial on load at site. |
| 784 | Repairs 80 mm dia to 900 mm dia sluicevalvein watersupply pumping station, W.T.P.within corporation limit in NWCMC,Nanded 900 mm dia |
| 785 | Dismentling of sluice valve at existing spot. |
| 786 | Providing&fixing of EN-9 metal sluice valve, spendle rod as per old sample. |
| 787 | Providing & fixing of gun metal spendle rod check nut as per old sample. |
| 788 | Making sluice valve flap chuck nut bracket as per old sample. |
| 789 | Providing & fixing sluice valve fixing nut bolts with washer as per required size. |
| 790 | Sluice valve gland body reboring & newbush fitting. |
| 791 | Sluice valve driving pipe shaft cutting & M.S. coupling welding. |
| 792 | Sluice valve drive spinner new providing. |
| 793 | Providing & fixing 4mm thick rubber packing. |
| 794 | Refitting sluice valve test & trial on load at site. |
| 795 | Repairs Gear Box sluicevalve 450 to 900 mm dia in watersupply pumping station, W.T.P. within corporation limit NWCMC,Nanded (450 mm) |
| 796 | Complete Dismantling of sluice valve at existing spot. |
| 797 | Providing&fixing pinion gear as per old sample. |
| 798 | Providing& fixing drive gear as per old sample. |
| 799 | Providing & repairing to 90mm sluice valve spendal rod complete size at 2 mtr. To 90mm OD or as per old sample. |
| 800 | Providing & moulding new gun metal chuck nut |
| 801 | Providing& fixing oil seat in gear box. as per old sample. |
| 802 | Providing& fixing thrust ball bearing no. 51220 SKF. or as per old sample. |
| 803 | Providing& fixing driving wheel as per old sample. |
| 804 | Providing & fixing rubber packing. |
| 805 | complete valve fitting with test & trial |
| 806 | Transportetion charges. |
| 807 | JCB Charges |
| 808 | Dismentaling channal valve at existing spot |
| 809 | Providing& fixing channal valve spindle rod as per sample. |
| 810 | Providing& fixing channal valve Gun metal chuck nut as per sample. |
| 811 | Repairs channal valve horizantal flap as per sample. |
| 812 | Repairs channal valve base foundation as per sample. |
| 813 | Complete fitting & testing channal valve at existing spot |
| 814 | Dismentling gate valve as per sample. |
| 815 | Providing & Fixing gate valve spindal rod as per sample. |
| 816 | Providing & Fixing gate valve as per sample. |
| 817 | Providing & Fixing gate valve M.S.plate as per sample. |
| 818 | Providing& fixing gate valve Gun metal chuck nut as per sample. |
| 819 | Providing & Fixing gate valve brass seal plate as per sample. |
| 820 | Complete fitting & testing gate valve at existing spot |
| 821 | Repairs Gear Box sluicevalve 450 to 900 mm dia in watersupply pumping station, W.T.P. within corporation limit NWCMC,Nanded (600 mm) |
| 822 | Complete Dismantling of sluice valve at existing spot. |
| 823 | Providing&fixing pinion gear as per old sample. |
| 824 | Providing& fixing drive gear as per old sample. |
| 825 | Providing & repairing to 90mm sluice valve spendal rod complete size at 2 mtr. To 90mm OD or as per old sample. |
| 826 | Providing & moulding new gun metal chuck nut |
| 827 | Providing& fixing oil seat in gear box. as per old sample. |
| 828 | Providing& fixing thrust ball bearing no. 51220 SKF. or as per old sample. |
| 829 | Providing& fixing driving wheel as per old sample. |
| 830 | Providing & fixing rubber packing. |
| 831 | complete valve fitting with test & trial |
| 832 | Transportetion charges. |
| 833 | JCB Charges |
| 834 | Dismentaling channal valve at existing spot |
| 835 | Providing& fixing channal valve spindle rod as per sample. |
| 836 | Providing& fixing channal valve Gun metal chuck nut as per sample. |
| 837 | Repairs channal valve horizantal flap as per sample. |
| 838 | Repairs channal valve base foundation as per sample. |
| 839 | Complete fitting & testing channal valve at existing spot |
| 840 | Dismentling gate valve as per sample. |
| 841 | Providing & Fixing gate valve spindal rod as per sample. |
| 842 | Providing & Fixing gate valve as per sample. |
| 843 | Providing & Fixing gate valve M.S.plate as per sample. |
| 844 | Providing& fixing gate valve Gun metal chuck nut as per sample. |
| 845 | Providing & Fixing gate valve brass seal plate as per sample. |
| 846 | Complete fitting & testing gate valve at existing spot |
| 847 | Repairs Gear Box sluicevalve 450 to 900 mm dia in watersupply pumping station, W.T.P. within corporation limit NWCMC,Nanded (700 mm) |
| 848 | Complete Dismantling of sluice valve at existing spot. |
| 849 | Providing&fixing pinion gear as per old sample. |
| 850 | Providing& fixing drive gear as per old sample. |
| 851 | Providing & repairing to 90mm sluice valve spendal rod complete size at 2 mtr. To 90mm OD or as per old sample. |
| 852 | Providing & moulding new gun metal chuck nut |
| 853 | Providing& fixing oil seat in gear box. as per old sample. |
| 854 | Providing& fixing thrust ball bearing no. 51220 SKF. or as per old sample. |
| 855 | Providing& fixing driving wheel as per old sample. |
| 856 | Providing & fixing rubber packing. |
| 857 | complete valve fitting with test & trial |
| 858 | Transportetion charges. |
| 859 | JCB Charges |
| 860 | Dismentaling channal valve at existing spot |
| 861 | Providing& fixing channal valve spindle rod as per sample. |
| 862 | Providing& fixing channal valve Gun metal chuck nut as per sample. |
| 863 | Repairs channal valve horizantal flap as per sample. |
| 864 | Repairs channal valve base foundation as per sample. |
| 865 | Complete fitting & testing channal valve at existing spot |
| 866 | Dismentling gate valve as per sample. |
| 867 | Providing & Fixing gate valve spindal rod as per sample. |
| 868 | Providing & Fixing gate valve as per sample. |
| 869 | Providing & Fixing gate valve M.S.plate as per sample. |
| 870 | Providing& fixing gate valve Gun metal chuck nut as per sample. |
| 871 | Providing & Fixing gate valve brass seal plate as per sample. |
| 872 | Complete fitting & testing gate valve at existing spot |
| 873 | Repairs Gear Box sluicevalve 450 to 900 mm dia in watersupply pumping station, W.T.P. within corporation limit NWCMC,Nanded (900 mm) |
| 874 | Complete Dismantling of sluice valve at existing spot. |
| 875 | Providing&fixing pinion gear as per old sample. |
| 876 | Providing& fixing drive gear as per old sample. |
| 877 | Providing & repairing to 90mm sluice valve spendal rod complete size at 2 mtr. To 90mm OD or as per old sample. |
| 878 | Providing & moulding new gun metal chuck nut |
| 879 | Providing& fixing oil seat in gear box. as per old sample. |
| 880 | Providing& fixing thrust ball bearing no. 51220 SKF. or as per old sample. |
| 881 | Providing& fixing driving wheel as per old sample. |
| 882 | Providing & fixing rubber packing. |
| 883 | complete valve fitting with test & trial |
| 884 | Transportetion charges. |
| 885 | JCB Charges |
| 886 | Dismentaling channal valve at existing spot |
| 887 | Providing& fixing channal valve spindle rod as per sample. |
| 888 | Providing& fixing channal valve Gun metal chuck nut as per sample. |
| 889 | Repairs channal valve horizantal flap as per sample. |
| 890 | Repairs channal valve base foundation as per sample. |
| 891 | Complete fitting & testing channal valve at existing spot |
| 892 | Dismentling gate valve as per sample. |
| 893 | Providing & Fixing gate valve spindal rod as per sample. |
| 894 | Providing & Fixing gate valve as per sample. |
| 895 | Providing & Fixing gate valve M.S.plate as per sample. |
| 896 | Providing& fixing gate valve Gun metal chuck nut as per sample. |
| 897 | Providing & Fixing gate valve brass seal plate as per sample. |
| 898 | Complete fitting & testing gate valve at existing spot |
| 899 | Repairs200 mm to 450 mm N.R.valvein raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate for 200 mm) |
| 900 | Dismentling ofN.R.V. at existing spot. |
| 901 | Providing new fixing of N.R.V. door plates in E.N.9 plates. |
| 902 | Providing & fixing gun metal colour for fixing doorsfor N.R.V. |
| 903 | Providing & fixing rubber seal to N.R. Valve plate. |
| 904 | ProvidingS.S.Road for hanging door is N.R.V. |
| 905 | Providing & fixingS.S. bush in N.R.V. door for hanging rod with reboring |
| 906 | Providing & fixing 4mm rubber packing. |
| 907 | Providing & fixing 20mmx75mmnut bolt with washer. |
| 908 | Refitting of N.R.Valve at existing spot with test & trial. |
| 909 | Repairs200 mm to 450 mm N.R.valvein raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate for 250 mm) |
| 910 | Dismentling ofN.R.V. at existing spot. |
| 911 | Providing new fixing of N.R.V. door plates in E.N.9 plates. |
| 912 | Providing & fixing gun metal colour for fixing doorsfor N.R.V. |
| 913 | Providing & fixing rubber seal to N.R. Valve plate. |
| 914 | ProvidingS.S.Road for hanging door is N.R.V. |
| 915 | Providing & fixingS.S. bush in N.R.V. door for hanging rod with reboring |
| 916 | Providing & fixing 4mm rubber packing. |
| 917 | Providing & fixing 20mmx75mmnut bolt with washer. |
| 918 | Refitting of N.R.Valve at existing spot with test & trial. |
| 919 | Repairs200 mm to 450 mm N.R.valvein raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate for 300 mm) |
| 920 | Dismentling ofN.R.V. at existing spot. |
| 921 | Providing new fixing of N.R.V. door plates in E.N.9 plates. |
| 922 | Providing & fixing gun metal colour for fixing doorsfor N.R.V. |
| 923 | Providing & fixing rubber seal to N.R. Valve plate. |
| 924 | ProvidingS.S.Road for hanging door is N.R.V. |
| 925 | Providing & fixingS.S. bush in N.R.V. door for hanging rod with reboring |
| 926 | Providing & fixing 4mm rubber packing. |
| 927 | Providing & fixing 20mmx75mmnut bolt with washer. |
| 928 | Refitting of N.R.Valve at existing spot with test & trial. |
| 929 | Repairs200 mm to 450 mm N.R.valvein raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate for 350 mm) |
| 930 | Dismentling ofN.R.V. at existing spot. |
| 931 | Providing new fixing of N.R.V. door plates in E.N.9 plates. |
| 932 | Providing & fixing gun metal colour for fixing doorsfor N.R.V. |
| 933 | Providing & fixing rubber seal to N.R. Valve plate. |
| 934 | ProvidingS.S.Road for hanging door is N.R.V. |
| 935 | Providing & fixingS.S. bush in N.R.V. door for hanging rod with reboring |
| 936 | Providing & fixing 4mm rubber packing. |
| 937 | Providing & fixing 20mmx75mmnut bolt with washer. |
| 938 | Refitting of N.R.Valve at existing spot with test & trial. |
| 939 | Repairs200 mm to 450 mm N.R.valvein raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate for 400 mm) |
| 940 | Dismentling ofN.R.V. at existing spot. |
| 941 | Providing new fixing of N.R.V. door plates in E.N.9 plates. |
| 942 | Providing & fixing gun metal colour for fixing doorsfor N.R.V. |
| 943 | Providing & fixing rubber seal to N.R. Valve plate. |
| 944 | ProvidingS.S.Road for hanging door is N.R.V. |
| 945 | Providing & fixingS.S. bush in N.R.V. door for hanging rod with reboring |
| 946 | Providing & fixing 4mm rubber packing. |
| 947 | Providing & fixing 20mmx75mmnut bolt with washer. |
| 948 | Refitting of N.R.Valve at existing spot with test & trial. |
| 949 | Repairs200 mm to 450 mm N.R.valvein raw water & pure water supply station in WTP Corporation limit NWCMC,Nanded (Rate for 450 mm) |
| 950 | Dismentling ofN.R.V. at existing spot. |
| 951 | Providing new fixing of N.R.V. door plates in E.N.9 plates. |
| 952 | Providing & fixing gun metal colour for fixing doorsfor N.R.V. |
| 953 | Providing & fixing rubber seal to N.R. Valve plate. |
| 954 | ProvidingS.S.Road for hanging door is N.R.V. |
| 955 | Providing & fixingS.S. bush in N.R.V. door for hanging rod with reboring |
| 956 | Providing & fixing 4mm rubber packing. |
| 957 | Providing & fixing 20mmx75mmnut bolt with washer. |
| 958 | Refitting of N.R.Valve at existing spot with test & trial. |
| 959 | Repairsof 80 mm to 200 mm dia air valve on raw water Rising main line & distribution lines in Corporation limit, NWCMC,Nanded (Rate for 80 mm) |
| 960 | Dismantling of Air valve at existing spot. |
| 961 | Providing new fixing Air lock plate in M.S. plate as per size. |
| 962 | Providing & fixing rubbber `O` ring in Air valve as per size. |
| 963 | Providing & fixing gun metal lock ring bush for air ball locking. |
| 964 | Providing & fixing wooden ball with rubber coating bowl new. |
| 965 | Air Valves stand pipe welding on existing spot with mobile welding & generator set. |
| 966 | Providing & fixing rubber packing 4 mm. |
| 967 | Providing & fixing M.S.Plate for Valve safety as per size. |
| 968 | Providing & fixing nut bolts (5/8 x 3``) 16X75 mm |
| 969 | Air Valves fitting & test & trial on existing size. |
| 970 | Transporting charges workshop to site & back to workshop. |
| 971 | Repairsof 80 mm to 200 mm dia air valve on raw water Rising main line & distribution lines in Corporation limit, NWCMC,Nanded (Rate for 100 mm) |
| 972 | Dismantling of Air valve at existing spot. |
| 973 | Providing new fixing Air lock plate in M.S. plate as per size. |
| 974 | Providing & fixing rubbber `O` ring in Air valve as per size. |
| 975 | Providing & fixing gun metal lock ring bush for air ball locking. |
| 976 | Providing & fixing wooden ball with rubber coating bowl new. |
| 977 | Air Valves stand pipe welding on existing spot with mobile welding & generator set. |
| 978 | Providing & fixing rubber packing 4 mm. |
| 979 | Providing & fixing M.S.Plate for Valve safety as per size. |
| 980 | Providing & fixing nut bolts (5/8 x 3``) 16X75 mm |
| 981 | Air Valves fitting & test & trial on existing size. |
| 982 | Transporting charges workshop to site & back to workshop. |
| 983 | Repairsof 80 mm to 200 mm dia air valve on raw water Rising main line & distribution lines in Corporation limit, NWCMC,Nanded (Rate for 125 mm) |
| 984 | Dismantling of Air valve at existing spot. |
| 985 | Providing new fixing Air lock plate in M.S. plate as per size. |
| 986 | Providing & fixing rubbber `O` ring in Air valve as per size. |
| 987 | Providing & fixing gun metal lock ring bush for air ball locking. |
| 988 | Providing & fixing wooden ball with rubber coating bowl new. |
| 989 | Air Valves stand pipe welding on existing spot with mobile welding & generator set. |
| 990 | Providing & fixing rubber packing 4 mm. |
| 991 | Providing & fixing M.S.Plate for Valve safety as per size. |
| 992 | Providing & fixing nut bolts (5/8 x 3``) 16X75 mm |
| 993 | Air Valves fitting & test & trial on existing size. |
| 994 | Transporting charges workshop to site & back to workshop. |
| 995 | Repairsof 80 mm to 200 mm dia air valve on raw water Rising main line & distribution lines in Corporation limit, NWCMC,Nanded (Rate for 150 mm) |
| 996 | Dismantling of Air valve at existing spot. |
| 997 | Providing new fixing Air lock plate in M.S. plate as per size. |
| 998 | Providing & fixing rubbber `O` ring in Air valve as per size. |
| 999 | Providing & fixing gun metal lock ring bush for air ball locking. |
| 1000 | Providing & fixing wooden ball with rubber coating bowl new. |
| 1001 | Air Valves stand pipe welding on existing spot with mobile welding & generator set. |
| 1002 | Providing & fixing rubber packing 4 mm. |
| 1003 | Providing & fixing M.S.Plate for Valve safety as per size. |
| 1004 | Providing & fixing nut bolts (5/8 x 3``) 16X75 mm |
| 1005 | Air Valves fitting & test & trial on existing size. |
| 1006 | Transporting charges workshop to site & back to workshop. |
| 1007 | Repairsof 80 mm to 200 mm dia air valve on raw water Rising main line & distribution lines in Corporation limit, NWCMC,Nanded (Rate for 200 mm) |
| 1008 | Dismantling of Air valve at existing spot. |
| 1009 | Providing new fixing Air lock plate in M.S. plate as per size. |
| 1010 | Providing & fixing rubbber `O` ring in Air valve as per size. |
| 1011 | Providing & fixing gun metal lock ring bush for air ball locking. |
| 1012 | Providing & fixing wooden ball with rubber coating bowl new. |
| 1013 | Air Valves stand pipe welding on existing spot with mobile welding & generator set. |
| 1014 | Providing & fixing rubber packing 4 mm. |
| 1015 | Providing & fixing M.S.Plate for Valve safety as per size. |
| 1016 | Providing & fixing nut bolts (5/8 x 3``) 16X75 mm |
| 1017 | Air Valves fitting & test & trial on existing size. |
| 1018 | Transporting charges workshop to site & back to workshop. |
| 1019 | Providing & constructing B.B. masonry valve chambersin NWCMC,Nanded |
| 1020 | Providing & constructing B.B. masonry valve chambers with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation BB masonry in c.m. 1:5 prop….……..etc complete. I. As above of 0.9 x 0.45 m internal size and depth up to 1.20 m with Pre cast RCC cover. |
| 1021 | II. As above of 1.5 x1.5 m internal size and depth up to 1.50 m with Pre cast RCC cover. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
