| 1 | 1 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge | BI01010001010000000000000515BI0100001113 | 1913.83 | Kg |
|---|
| 2 | 2 | For shutters of doors, windows &ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required | BI01010001010000000000000515BI0100001114 | 348 | Kg |
|---|
| 3 | 3 | Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron (Labour rate only) | BI01010001010000000000000515BI0100001115 | 2261.83 | Kg |
|---|
| 4 | 4 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. | BI01010001010000000000000515BI0100001116 | 143.54 | Sqm |
|---|
| 5 | 5 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) | BI01010001010000000000000515BI0100001117 | 71.85 | Sqm |
|---|
| 6 | 6 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineerin-charge. | BI01010001010000000000000515BI0100001118 | 10 | No |
|---|
| 7 | 7 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc.complete | BI01010001010000000000000515BI0100001119 | 8 | No |
|---|
| 8 | 8 | Providing and fixing aluminum sliding doorbolts ISI marked anodized (anodic coatingnot less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nuts and screws etc.complete : | BI01010001010000000000000515BI0100001120 | 16 | No |
|---|
| 9 | 9 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth | BI01010001010000000000000515BI0100001121 | 0.98 | Cum |
|---|
| 10 | 10 | 12.5 mm thick cement plaster 1:4 | BI01010001010000000000000515BI0100001122 | 8.37 | Sqm |
|---|
| 11 | 11 | Providing and Fixing in position collapsible steel shutters, with vertical channels20mmx10mmx2mm and braced with flat irondiagonals 20mmx5mm size with top and bottomrails of T iron 40mmx40mmx6mm with 38mm diasteel pulleys, complete with bolts, nuts, locking arrangements, stoppers, handles, etc. completein all respects. | BI01010001010000000000000515BI0100001123 | 11.84 | Sqm |
|---|
| 12 | 12 | Supplying and fixing rolling shutters, ofapproved make, made of 80mmx1.25mm,M.S. Laths, interlocked together throughtheir entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed) | BI01010001010000000000000515BI0100001124 | 12.25 | Sqm |
|---|
| 13 | 13 | Providing and fixing mineral fibre false ceiling tiles at all heights With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. | BI01010001010000000000000515BI0100001125 | 31.2 | Sqm |
|---|
| 14 | 14 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing inposition | BI01010001010000000000000515BI0100001126 | 1.85 | Qtl |
|---|
| 15 | 15 | Factory manufactured flush door fixed inposition iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing thesame in position ( 35mm thick ) | BI01010001010000000000000515BI0100001127 | 19.95 | Sqm |
|---|
| 16 | 16 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface\nto required finish complete. | BI01010001010000000000000515BI0100001128 | 39.9 | Sqm |
|---|
| 17 | 17 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface\nto required finish complete. | BI01010001010000000000000515BI0100001129 | 39.9 | Sqm |
|---|
| 18 | 18 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. | BI01010001010000000000000515BI0100001130 | 97.3 | Sqm |
|---|
| 19 | 19 | Providing & fixing 100mm with Plate 150mm X 32 mm anodized aluminum Mat Finish handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge | BI01010001010000000000000515BI0100001131 | 96 | No |
|---|
