Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-04-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-04-2021 |
| 2 | 31-03-2021 | CWE/AF AMB/HAL-56/2020-21 ADDITION / ALTERATION TO CERTAIN OMQS AT AF STN HALWARA UNDER GE (AF) HALWARA | Other | 12-04-2021 |
| NAME OF WORK : ADDITION / ALTERATION TO CERTAIN OMQS AT AF STN HALWARA UNDER GE (AF) HALWARA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed. | item1 | 2925.14 | Sqm |
| 2 | 2 | Material and labour coloured, non-skid, jointfree, ceramic tiles, 7 to 8 mm thick, square/ rectangular, area of each tile exceeding 0.11 but not exceeding 0.18 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in cement mortar 1:6, complete all as specified and directed. | item2 | 503 | Sqm |
| 3 | 3 | Material and labour coloured, non-skid, jointfree, ceramic tiles, 7 to 8 mm thick , square/ rectangular, area of each tile exceeding 0.11 but not exceeding 0.18 Sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in cement Mortar 1:4, complete all as specified and directed. | item3 | 38.08 | Sqm |
| 4 | 4 | Material and labour glazed ceramic coloured tiles of size 300mm X200mm, 6-7 mm thick on vertical surface as in skirting/dado, set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. \n | item4 | 1190 | Sqm |
| 5 | 5 | Material and labour Vitrified ceramic tiles, coloured, light shade, 10 mm thick, square/ rectangular, polished, area of each tile not exceeding 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 20 mm thick screed bed or bedding layers in cement mortar 1:6, complete all as specified and directed. | item5 | 1262.14 | Sqm |
| 6 | 6 | Material and labour Vitrified ceramic tiles, coloured, light shade, 10 mm thick, square/ rectangular, polished, area of each tile not exceeding 0.36 Sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. | item6 | 104.67 | Sqm |
| 7 | 7 | Demolition of stone slabs and tiles of any description or thickness as in floors, aprons etc, laid, bedded & pointed in any mortar and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed. | item7 | 5.2 | Ten Sqm |
| 8 | 8 | Material and labour for machine cut Granite stone slab/tiles, 18-20 mm thick, table rubbed and polished, as on shelves/ cooking platform/steps/pillars etc, laid over and including 20 mm thick screed bed or bedding layers in cement mortar 1:4, set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.\n | item8 | 52 | Sqm |
| 9 | 9 | Material and labour rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. | item9 | 56 | RM |
| 10 | 10 | S&F 140 mm length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with vulcanised rubber piece complete all as specified and directed. | item10 | 84 | Each |
| 11 | 11 | Supply and fixing vitreous china wash hand basin, flat back or angle back type, white, size 550x400mm including 32mm bore PVC waste pipe and CP waste fitting and a pair of mild steel angle iron/ PVC brackets of suitable size fixed as in counter slab complete all as specified and as directed. | item11 | 28 | Each |
| 12 | 12 | S&F in replacement sink with drainage board made of stainless steel 1.00 mm thick steel sheet, kitchen or laboratory with plug & chain, waste coupling, washers and 32 mm bore PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantiliver MS brackets and connecting union to pipe, over all size 915 mm x 460mm & bowl size 410mm x 330mm x 160mm complete all as specified and directed. | item12 | 28 | Each |
| 13 | 13 | S&F in replacement stainless steel plate rack of size approx 750mm x 900mm x 250mm, made out of 1.0 mm thick steel sheet with fixing arrangement and as per sample kept in GE's office suitable for officers quarters complete all as specified and as directed.\n | item13 | 14 | Each |
| 14 | 14 | Supply and fixing in replacement vitreous china wash down water closet (Pedestal pattern), white, including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom, aluminium hinging devices and EWC jet (health faucet) , chromium plated, fancy type, 15 mm bore with 1 mtr long PVC connection pipe including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed. | item14 | 28 | Each |
| 15 | 15 | Supply and fixing in replacement PVC low level flushing cistern, white, valveless syphonic action type 10 litre capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified and directed. | item15 | 42 | Each |
| 16 | 16 | Supply and fixing in replacement PVC connection 450mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed | item16 | 154 | Each |
| 17 | 17 | S&F in replacement PVC bath cabinet mirror, white, size 350mm x 450mm with 4 mm thick framed mirror complete all as specified and directed.\n | item17 | 28 | Each |
| 18 | 18 | S&F in replacement chromium plated grating doom 100mm dia fixed complete all as specified and directed. | item18 | 28 | Each |
| 19 | 19 | S&F in replacement brass, chromium plated, shower rose 125mm size,15 mm dia, with or without swivel joints including fixed to steel pipe or union, complete all as specified and directed.\n\n | item19 | 42 | Each |
| 20 | 20 | Taking up or down GI tubing and connections for refixing or removal from site for 15 mm bore pipe complete all as specified and directed. | item20 | 350 | RM |
| 21 | 21 | S&F galvanised mild steel water tubes 15 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling with and including cutting chasing whereever required or laid in floor complete all as specified and as directed. | item21 | 350 | RM |
| 22 | 22 | Material and labour in replacement 600mm X 450mm, beveled edge mirror, of selected quality glass 5.5 mm thick, mounted on and including 6mm thick AC building board or commercial plywood fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | item22 | 14 | Each |
| 23 | 23 | S&F decorative laminates 0.9 mm thick, type 1 of any tint/design/pattern as approved & fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. | item23 | 50 | Sqm |
| 24 | 24 | S&F PVC cabinet in required sizes at site made out of 18mm thick, one side decorative lamination & other side balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5 screws etc. the panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish including catchers shuters fixed with 75mm size stainless steel butt hinges in each pane, Stainless steel handle 125mm long including taking down existing wooden/block board cabinet complete all as specified and directed. | item24 | 120 | Sqm |
| 25 | 25 | Dismantling of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed. | item25 | 8 | Cum |
| 26 | 26 | Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:6 complete all as specified and as directed. | item26 | 127.78 | Cum |
| 27 | 27 | Taking down cement plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water including removal of debries to distance not exceeding 500 mtr complete all as specified and directed. | item27 | 1570 | Sqm |
| 28 | 28 | Material and labour rendering 12 mm thick in cement mortar 1:6, finished even and smooth without using extra cement on fair faces of brick or concrete surfaces complete all as specified and directed.\n | item28 | 700 | Sqm |
| 29 | 29 | Material and labour rendering 5 mm thick in cement mortar 1:3, finished even and smooth without using extra cement on fair faces of concrete surfaces as in ceiling complete all as specified and directed.\n | item29 | 230 | Sqm |
| 30 | 30 | Material & labour rendering 15 mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instructions on fair faces of brick or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed.\nNote : WPC shall be measured and paid separately as supply only.\n | item30 | 1390 | Sqm |
| 31 | 31 | Material and labour preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and as directed. | item31 | 230 | Sqm |
| 32 | 32 | Material and labour preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and as directed. | item32 | 230 | Sqm |
| 33 | 33 | Material and labour preparation of newly plastered surfaces of wall, applying one coat of wall care putty to make the surface even & smooth and applying two coats of Oil bound distemper of approved shade/tint, complete all as specified and as directed. | item33 | 700 | Sqm |
| 34 | 34 | Material and labour preparation of newly plastered surfaces of wall and applying two coat of cement base paint over & including one coat of alkali resistant primer complete all as specified and as directed. | item34 | 1290 | Sqm |
| 35 | 35 | Material and labour preparation of old treated plastered/unplastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, filling holes & cracks with cement base putty and applying one coat of white wash on walls complete all as specified and directed. | item35 | 840 | Sqm |
| 36 | 36 | Material and labour preparation of old treated plastered/unplastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, filling holes & cracks with cement base putty and applying one coat of white wash on ceiling complete all as specified and directed. | item36 | 1900 | Sqm |
| 37 | 37 | Complete removal of existing treatment and applying two coats of distemper oil emulsion of approved shade/tint over & including one coat white wall care putty of any thickness as specified to achieve smooth finish surfaces of walls complete all as specified and directed. | item37 | 2935 | Sqm |
| 38 | 38 | Complete removal of existing treatment and applying two coats of cement base paint over & including one coat white wall care putty of any thickness as specified to achieve smooth finish surfaces of walls complete all as specified and directed. | item38 | 3850 | Sqm |
| 39 | 39 | M&L preparation of old painted wood and wood based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | item39 | 975 | Sqm |
| 40 | 40 | M&L preparation of old painted steel and iron based surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. | item40 | 85 | Sqm |
| 41 | 41 | Supply and fixing sheet glass 4.0 mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed. | item41 | 102 | Sqm |
| 42 | 42 | Supply and fixing figured glass, pin head type, 4.0 mm thick and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed. | item42 | 17.01 | Sqm |
| 43 | 43 | Supply and fixing in replacement stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. | item43 | 67.34 | Sqm |
| 44 | 44 | Taking down chowkhats or frames exceeding 1.5 but not exceeding 4.0 sqm each with shutters (without taking off shutter from frames) removing from site including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and directed | item44 | 70 | Each |
| 45 | 45 | Taking down chowkhats or frames not exceeding 1.5 sqm each with shutters (without taking off shutter from frames) removing from site including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and directed | item45 | 154 | Each |
| 46 | 46 | Supply and fixing pressed steel door frames of size 125 mm x 60 mm with one or more rebates including fixing necessary lugs, 3 Nos 100 mm long hinges per shutter , lock strike plate etc. including making good the disturbed portion to match with existing complete all as specified and directed. | item46 | 133 | RM |
| 47 | 47 | Supply and fixing pressed steel door frames of size 105 mm x 60 mm with one or more rebates including fixing necessary lugs, 3 Nos 100 mm long hinges per shutter, lock strike plate etc. including making good the disturbed portion to match with existing complete all as specified and directed. | item47 | 182 | RM |
| 48 | 48 | Material and labour plain cement concrete, 1:3:6, type C1, using 20 mm graded mechanically crushed stone aggregate as in hold fasts, filling of pressed steel frame etc. complete all as specified and directed. | item48 | 2.14 | Cum |
| 49 | 49 | Supply and fixing second class, hard wood, glazed and skeleton shutter, 35mm thick, factory made, open rebated and prepared to receive glass/guage etc, without sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/guage etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I(2009) complete all as specified and directed. | item49 | 72.4 | Sqm |
| 50 | 50 | Supply and fixing factory made, second class, hard wood, plain framed, panelled shutter (two panel), 35 mm thick with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. | item50 | 138 | Sqm |
| 51 | 51 | Supply and fixing 30mm thick flush shutter, factory made, solid core construction with particle board core and plywood face panels commercial type on both side complete all as specified and as directed. | item51 | 61.6 | Sqm |
| 52 | 52 | Supply and fixing factory made, solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2010) complete all as specified and directed. | item52 | 315 | RM |
| 53 | 53 | Supply and fixing factory made, solid panels PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail, bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement fixed in the frame at site complete all as sepcified and directed. | item53 | 93.1 | Sqm |
| 54 | 54 | Cutting holes in brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4, type B-1, exceeding half brick but not exceeding one brick thick wall complete all as specified and as directed.\nNote: Depth of embedded portion of holdfasts or lugs measured from the face of the jamb\ninto the wall | item54 | 392 | Each |
| 55 | 55 | Cutting chases on brick wall, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing steps cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing and making good not exceeding10cm girth complete all as specified and directed. | item55 | 350 | RM |
| 56 | 56 | Taking up or down GI tubing and connections for refixing or removal from site for 20 mm bore pipe complete all as specified and directed. | item56 | 280 | RM |
| 57 | 57 | S&F galvanised mild steel water tubes 20 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling with and including cutting chasing whereever required or laid in floor complete all as specified and directed. | item57 | 280 | RM |
| 58 | 58 | S&F in repair vitreous china squatting pan (Orissa pattern) 580mmx440mm, white with PVC ‘P’ or ‘S’ trap front or back inlet with integral foot rests excluding flushing cistern and flush pipe including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed. | item58 | 14 | Each |
| 59 | 59 | Material and labour machine cut Kota stone slab 18 to 20mm thick as in flooring/stair case landing, laid over and including 15 mm thick screed bed in cement mortar 1:6, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. | item59 | 104 | Sqm |
| 60 | 60 | Material and labour machine cut Kota stone slab 16 to 18 mm thick as in skirting / dado, steps, laid over and including 10 mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed. | item60 | 84 | Sqm |
| 61 | 61 | Supply and fixing factory made UPVC white colour sliding window/composite. Three track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm), sliding interlock (one vertical lenght in each shutters) ( 45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing of hardware EPDM gasket, 1.2 +-0.2mm thick galvanised steel frame (30mm x 18mm) 02 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm) long fasteners. Hardware : (Touch lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreture 1.40mm and required accessories) complete all as specified and directed. \nNote : (i) The unit reate quoted by contactor excludes cost of glass and includes all other connected accessories. \n(ii) Net opening will be measured for payment purpose.\n(iii) Area not exceeding 2.00 sqm each. | item61 | 129 | Sqm |
| 62 | 62 | Supply and fixing factory made UPVC white colour sliding window made of extruded porfiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), T profile (one vertical length in between two shutters (60mm x 74mm), glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners including railing of holes for fixing of hardware and drainage of water etc making arrangement for fixing of hardware EPDM gasket, 1.2 +-0.2mm thick galvanized steel frame (28mm x 12.5mm) 02 Nos, T profile (27mm x 17mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed. \nNote : (i) The unit reate quoted by contactor excludes cost of glass and includes all other connected accessories. \n(ii) Net opening will be measured for payment purpose.\n(iii) Area not exceeding 2.00 sqm each. | item62 | 24.84 | Sqm |
| 63 | 63 | S&F in replacement factory made Box type steel window, double shutter, glazed and wire gauzed with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of guard bars complete all as specified and directed. \nNotes: - \n(i) Windows shall be fabricated as per drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. \n(ii) Glazing & Wire cloth shall be measured and paid separately .\n(iii) MS guard bars shall be measured and paid separately. \n(iv) Double shutter meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively. Both the shutters shall be measured as one unit.\n(v) Taking down of old window/shutter also included in quoted rates. | item63 | 15.12 | Sqm |
| 64 | 64 | S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed | item64 | 700 | Kg |
| 65 | 65 | S&F 300 mm long, aluminium alloy, anodized, sliding door bolt with hasp , staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts , sliding bolts of extruded section complete all as specified & directed | item65 | 70 | Each |
| 66 | 66 | S&F 200 mm long, aluminium, anodized, barrel tower bolt of extruded section complete all as specified & directed | item66 | 140 | Each |
| 67 | 67 | S&F 150 mm size, aluminium, anodized, handle, cast type fixed complete all as specified and directed | item67 | 140 | Each |
| 68 | 68 | S&F 100 mm size, MS butt hinges, medium weight, cold rolled, fixed complete all as specified and directed | item68 | 294 | Each |
| 69 | 69 | M&L preparation of new or previously untreated wood and wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified and directed. | item69 | 534.12 | Sqm |
| 70 | 70 | Resecuring or easing & adjustment of shutter of any description without taking down shutter, shutter exceeding 1.0 sqm & not exceeding 2.0 sqm each complete all as specified and directed | item70 | 70 | Each leaf |
| 71 | 71 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete), internal dia 100mm, set in cement mortar complete all as specified and directed. | item71 | 98 | RM |
| 72 | 72 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete), internal dia 75 mm, set in cement mortar complete all as specified and directed. | item72 | 84 | RM |
| 73 | 73 | Supply and fixing PVC (SWR) pipe 110 mm bore, single socketed in any length with rubber ring joints, fixed to wall/floor complete all as specified and directed. | item73 | 98 | RM |
| 74 | 74 | Supply and fixing PVC (SWR) pipe 75 mm bore, single socketed in any length with rubber ring joints, fixed to wall/floor complete all as specified and directed. | item74 | 84 | Sqm |
| 75 | 75 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed. | item75 | 56 | Each |
| 76 | 76 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed. | item76 | 98 | Each |
| 77 | 77 | Dismantling of water tanks from any position/location, of any make etc and removing to store, capacity exceeding 250 Ltr & not exceeding 500 Ltr with ball valve complete all as specified and as directed. | item77 | 42 | Each |
| 78 | 78 | S&F rotational moulded polythene(PVC) water storage tank, HDPE, off white colour, triple layered , cylinderical type fixed and hoisted in position on roof, at any height, of capacity 500 ltr and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball brass valve high pressure with polyethylene float complete all as specified and directed. | item78 | 28 | Each |
| 79 | 79 | S&F rotational moulded polythene(PVC) water storage tank, HDPE, off white colour, triple layered , cylinderical type fixed and hoisted in position on roof, at any height, of capacity 1000 ltr and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball brass valve high pressure with polyethylene float complete all as specified and directed. | item79 | 14 | Each |
| 80 | 80 | Refixing after cleaning and removing with bleaching powder to all scale, sludge, mud, algae and dirt etc from tanks capacity upto and including 500 ltr from mouths of circulting pipes etc and washing with clean water including writing in words with synthetic enamel paint as \"CLEANED ON (date)\" complete all as specified and directed. | item80 | 14 | Each |
| 81 | 81 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness(below or above ground level) rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed. | item81 | 128.9 | Cum |
| 82 | 82 | Material and labour 25mm thick PCC 1:2:4, type B0, using 12.5 graded mechanically crushed stone aggregate as in floor to receive tiles complete all as specified and directed. | item82 | 533 | Sqm |
| 83 | 83 | Material and labour 40mm thick PCC 1:2:4, type B1, using 20mm graded mechanically crushed stone aggregate as in floor including finishing even and smooth without using extra cement complete all as specified and directed. | item83 | 420 | Sqm |
| 84 | 84 | M&L 75mm thick PCC 1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. \nNotes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,12 mm wide.\n (ii) 50 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume. | item84 | 840 | Sqm |
| 85 | 85 | Material and labour cement concrete interlocking tiles 30cm X 30cm X 25 mm thick, with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry in floors over and including screed bed 20 mm thick in cement mortar 1:6 complete all as specified and directed.. | item85 | 880 | Sqm |
| 86 | 86 | S&F in repair curtain harrison rails of anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and directed. | item86 | 350 | RM |
| 87 | 87 | Material and labour PCC 1:2:4, type B-1, using 20 mm graded mechanically crushed stone aggregates as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work complete all as specified and as directed.\nNote : The quoted rates include for use of formwork (straight or curved).\n | item87 | 14 | Cum |
| 88 | 88 | S&F in repair chromium plated, brass, tubular towel rail, fancy type, with fancy type brass CP brackets on both sides, 20mm dia, D type 60 cm long between flanges , fixed with screws complete all as specified and as directed.\n | item88 | 42 | Each |
| 89 | 89 | S&F cast iron floor trap 75mm dia with chromium plated grating, including jointing to waste pipe with run lead joint and embedded in cement concrete type B-1 (1:2:4) complete all as specified and directed. | item89 | 84 | Each |
| 90 | 90 | Demolition of cement concrete (unreinforced) above ground floors (as sunken floor) and pavings exceeding 15 cm thickness rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed. | item90 | 10.5 | Cum |
| 91 | 91 | Material and labour PCC 1:5:10, type E-2, using 40 mm graded mechanically crushed stone aggregates as in foundation, sub base (as in sunken floor) and mass concrete complete all as specified and as directed. | item91 | 33.75 | Cum |
| 92 | 92 | Material and labour two coat of water proofing compound as per manufacturer's instruction by brush on the entire surface of sunken portion, 15mm thick screed bed/bedding layer in cement mortar 1:3 mixed with integral water proofing compound @ 130ml per bag of cement including one bonding coat of cement slurry mixed with WPC @ 200ml per bag of cement complete all as specified & directed.complete all as specified and directed. | item92 | 8.51 | Sqm |
| 93 | 93 | Supply and fixing brass chromium plated 15mm bore, hot and cold wall/basin mixture screwed down for water pipe complete as specified and directed.\n\n | item93 | 42 | Each |
| 94 | 94 | Supply and fixing in repair bib taps, 15 mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed. | item94 | 126 | Each |
| 95 | 95 | Supply and fixing in repair stop valve/angle valve, 15 mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed. | item95 | 196 | Each |
| 96 | 96 | Supply and fixing in repair stop valve/angle valve, 20 mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed. | item96 | 42 | Each |
| 97 | 97 | S&F 15 mm bore pillar tap, cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed for iron pipe or for brass ferrule complete all as specified & directed. | item97 | 28 | Each |
| 98 | 98 | Supply & fixing MS Helical door spring 300 mm ordinary rat tail rod pattern including roller and roller plate complete all as specified and directed | item98 | 42 | Each |
| 99 | 99 | Material and labour post constructional anti termite treatment of the soil along external perimetre of building below ground level or masonry apron at the rate of 2.25 litre of emulsion per metre of surface area including drilling and plugging holes etc. in apron complete all as specified and directed.\n | item99 | 1427.51 | RM |
| 100 | 100 | Material and labour post constructional anti termite treatment of the soil under existing floor using emulsion at the rate of one litre of emulsion per hole, 300 mm apart including drilling and plugging 12 mm dia hole with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor complete all as specified and directed.\n | item100 | 1232.14 | Sqm |
| 101 | 101 | Material and labour post constructional anti termite treating at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/ hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.\nNote for item No. 99.00 to 101.00:- For Guarantee & Security deposit refer Particulars specification.\n | item101 | 235 | RM |
| 102 | 102 | Dismantling of brick tiles or terracing tiles single layers on roof and rubbish off the premises to a distance not exceeding 500 mtr including stacking of servicable brick tiles complete all as specified and directed. | item102 | 1090 | Sqm |
| 103 | 103 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removal to a distance exceeding 1.50 Km but not exceeding 5 Km & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed | item103 | 113.8 | Cum |
| 104 | 104 | Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.0 Kg/Sqm complete all as specified and directed | item104 | 1090 | Sqm |
| 105 | 105 | Material and labour 50 mm average thickness, PCC 1:2:4, type B1, using 20 mm graded mechanically crushed stone aggregates over roof slab as in padding in slope to make good the depressions/undulations complete all as specified and directed. | item105 | 1090 | Sqm |
| 106 | 106 | Material and labour 10 mm thick plastering in cement mortar 1:4 on cleaned RCC roof slab surfaces, sides of parapet etc mixed with water proofing compound (WPC) as per manufacturer's instructions, finished even and fair complete all as specified and directed.\nNote : WPC shall be measured and paid separately as supply only.\n | item106 | 1090 | Sqm |
| 107 | 107 | Supply only integral water proofing compound (WPC) complete all as specified and directed. | item107 | 550 | Kg |
| 108 | 108 | Material and labour Atactic Polypropylene (APP) polymeric water proofing treatement to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.0 kg per sqm, black finish reinforced with non-woven polyster (Weight not less than 150 gms per Sqm), with properties of high penetration and centre core consisting of 90 micron, high molecular high density polyethylene (HMHDPE) film consisting of five layers with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.30 Ltr per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per Sqm below APP and two coats of water proofing paint with aluminium finish on top of laid APP surfaces, complete all as specified and directed . | item108 | 960 | Sqm |
| 109 | 109 | Material and labour mineral faced Atactic Polypropylene (APP) polymeric water proofing treatement to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.0 kg per sqm, black finish reinforced with non-woven polyster (Weight not less than 150 gms per Sqm), with properties of high penetration and centre core consisting of 90 micron, high molecular high density polyethylene (HMHDPE) film consisting of five layers with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.30 Ltr per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per Sqm below APP, complete all as specified and as directed . Note for item 108.00 & 109.00:- \n(i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment (BOQ item No 102 to 109) shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect. | item109 | 330 | Sqm |
| 110 | 110 | Dismantling of RCC jali (thickness not exceeding 100mm) and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed. | item110 | 100 | Sqm |
| 111 | 111 | Supply and fixing prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.\nNote:- The net area of sheeting as fixed shall be measured on the flat (not girthed to corrugations) without any extra allowance for lapse. | item111 | 137.5 | Sqm |
| 112 | 112 | Supply and fixing 1.25 mm thick MS, plain black sheet in wall cladding, steel gates covering to door chowkhats and simlar work cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc as required complete all as specified and directed.\n | item112 | 110 | Sqm |
| 113 | 113 | Material and labour repairing RCC projection chajjas, roof, facia etc, by necessry preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded mechanically crushed stone aggregates and reinforcing with welded wire mesh of weight exceednig 2.0 Kg per sqm and not exceeding 4.0 Kg per sqm complete all as specified & directed. | item113 | 96 | Sqm |
| 114 | 114 | M&L for mild steel XPM, Expanded metal of weight not less than 4Kg per Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members or fixed to RCC work or ceiling surface complete all as specified & directed. \n | item114 | 160 | Sqm |
| 115 | 115 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and any position not otherwise specifically provided including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed. | item115 | 14 | Cum |
| 116 | 116 | Material and labour cement concrete cast in situ, 1:2:4, type B-1, using 20 mm graded mechanically crushed stone aggregates as in lintels upto 1.5 mtr clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.\nNote : The quoted rates include for use of formwork (straight or curved).\n | item116 | 2.8 | Cum |
| 117 | 117 | M&L reinforced cement concrete (nominal mix), type B-1, 1:2:4, using 20 mm graded mechanically crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. | item117 | 14 | Cum |
| 118 | 118 | Use and waste formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide for rough finished flat surface of concrete complete all as specified and directed. | item118 | 42 | Sqm |
| 119 | 119 | M&L mild steel TMT bars, 10 mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. | item119 | 840 | Kg |
| 120 | 120 | M&L mild steel TMT bars, 5 mm dia and over upto 10mm dia, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in stirrups, spacers and binders complete all as specified and directed. | item120 | 168 | Kg |
| 121 | 121 | Material and labour Precast cement concrete, 1:2:4, type B-1 using 20 mm graded mechanically crushed stone aggregates set in cement mortar 1:4 as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.\nNote : The quoted rates include for use of formwork (straight or curved).\n | item121 | 7 | Cum |
| 122 | 122 | Supply and fixing mild steel framed work as in door or gate of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides and hanging, fastening and fixing complete conforming to Fe 410-W (Gde-E- 250) quality- A complete all as specified and directed.\n | item122 | 900 | Kg |
| 123 | 123 | M&L preparation of new or previously untreated iron and iron based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over & including one coat of red oxide primer complete all as specified and directed. | item123 | 750 | Sqm |
| 124 | 124 | S&F in repair 75mm bore PVC (SWR) vent cowl fixed with adhesive complete all as specified and directed. | item124 | 14 | Each |
| 125 | 125 | S&F in repair PVC (SWR) gully trap 125/110 mm ,setting and jointing with solvent complete all as specified and directed. | item125 | 28 | Each |
| 126 | 126 | S&F glass dividing strips 3mm thick, 38mm wide, inserted in postion complete all as specified and directed. | item126 | 84 | RM |
| 127 | 127 | Dismantling post or struts (wood, steel or RCC) embedded in concrete/brick work/Masonry etc, any section, in any position, incl taking out embedded portion & making good disturbed ground complete all as specified and directed. | item127 | 1049.9 | RM |
| 128 | 128 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick in soft/loose soil watering, and removing surplus soil to a distance not exceeding 50 mtr and making good surface complete all as specified and directed. | item128 | 350 | Each |
| 129 | 129 | Material and labour PCC 1:3:6 type C-2 using 40 mm graded mechanically crushed stone aggregates as in foundation, sub base and mass concrete complete all as specified and as directed. | item129 | 14.18 | Cum |
| 130 | 130 | S&F for mild steel work Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed. | item130 | 3147 | Kg |
| 131 | 131 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc with and including binding wire complete all as specified and directed. | item131 | 1559.3 | Sqm |
| 132 | 132 | Supply only MS galvanised chain link fencing any size or type complete all as specified and directed. \nNote:- Weight of chain link fencing shall be ascertained through BOO, to be detailed by GE. | item132 | 2330.78 | Kg |
| 133 | 133 | Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation etc or for walls, shafts, manholes not exceeding 10 Sqm on plan or for laying pipes/cables etc and getting out, in soft/loose soil complete all as directed. | item133 | 198 | Cum |
| 134 | 134 | Removal of excavated soil to a distance not exceeding 50 mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed. | item134 | 92 | Cum |
| 135 | 135 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick each in soft/loose soil complete all as specified and as directed. | item135 | 95 | Cum |
| 136 | 136 | Surface excavation not exceeding 30 centimetre deep, averaging 15 centimetre deep and getting out in soft/loose soil complete all as specified and directed. | item136 | 1000 | Sqm |
| 137 | 137 | Supply and fixing in repair 12 mm thick prelaminated particle board, interior grade, laminated on one side with decorative choice lamination & other side balancing with white laminaton fixed with screwes to timber frame complete all as specified and directed | item137 | 30 | Sqm |
| 138 | 138 | Supply and fixing 18/19 mm thick block board, grade two quality, interior grade, commercial type, fixed with screws to frame work complete all as specified and directed. | item138 | 50 | Sqm |
| 139 | 139 | Supply and fixing in repair 20 mm bore stop valves, concealed type, cast copper alloy, fancy type, chromium plated with long shank and cup, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe including cutting chases required for concealing complete all as specified and directed. | item139 | 28 | Each |
| 140 | 140 | Taking down carefully copper/aluminium point wiring light/fan/bell/socket or power complete fittings such as switches, sockets, ceiling rose, pandent holders, light fittings etc including taking down carefully by unscrewing from board/outlets/DBs/fittings etc such as switches,lamp holdes,brakets,ceiling fittings, bulkhead fittings,sketch fittings, tube light fittings, fan regulators,electric meters, meter bos any type etc and/or drawing out from existing conduit/batten and making good disturbed surfaces of walls/floors/ceilings complete all as specified and directed . | item140 | 994 | Point |
| 141 | 141 | Material and labour for concealed point wiring with Flame retardant low smoke(FRLS), PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, 1100 volt, in and including non metallic rigid PVC concealed conduit not less than 19/20mm bore, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness(duly painted with two coat of anticorrosive paint outside & aluminium paint inside) with decorative laminated sheet top cover 3 mm thick including Flame retardant low smoke(FRLS), PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly for one light point, ceiling fan/exhaust fan point & call bell point controlled by one way switch 5/6 amp complete all as specified and directed.\n | item141 | 602 | Point |
| 142 | 142 | Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, 1100 volt, in and including non metallic rigid PVC concealed conduit not less than 19/20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylem) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly for one socket outlet point 5/6 amp controlled by one switch on the same board complete all as specified and directed.\n | item142 | 168 | Point |
| 143 | 143 | Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, 1100 volt, in and including non metallic rigid PVC concealed conduit not less than 19/20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylem) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly for one socket outlet point 5/6 amp controlled by one switch on the independent board complete all as specified and directed.\n | item143 | 126 | Point |
| 144 | 144 | Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with stranded copper conductor, 1100 volt, in and including non metallic rigid PVC concealed conduit not less than 19/20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylem) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly for one socket outlet point 15/16 amp controlled by one switch on the independent board complete all as specified and directed.\nNote for srl No 141.00 to 144.00 :- \n(i) Switch, socket outlet, switch socket combination, bell push and fan regulator shall be measured and paid for separately.\n(ii) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match with the existing surfaces. | item144 | 98 | Point |
| 145 | 145 | S&F switch piano, flush type, 5/6 amp, single pole, one way, 240 volt complete all as specified and directed. | item145 | 868 | Each |
| 146 | 146 | S&F bell push, flush type, 5/6 amp, 240 volt complete all as specified and directed. | item146 | 28 | Each |
| 147 | 147 | S&F socket outlet, flush type, 5 pin, 5/6 amp, 240 volt, complete all as specified and directed. | item147 | 294 | Each |
| 148 | 148 | S&F switch piano, flush type, 15/16 amp, single pole, one way, 240 volt complete all as specified and directed. | item148 | 98 | Each |
| 149 | 149 | S&F socket outlet 2 in 1 multipurpose, flush type, 6 pin, 5/6 & 15/16 amp, 240 volt, complete all as specified and directed. | item149 | 98 | Each |
| 150 | 150 | S&F electronic fan regulator step up type, single pole 240 volts, 50 Hz, 100 watts, flush type, heavy duty including making necessary connections, complete all as specified and directed.\n | item150 | 84 | Each |
| 151 | 151 | Supply and fixing ceiling rose surface bakelite, 65X50 mm three terminals ,230 volts,ISI mark complete all as specified and directed. | item151 | 462 | Each |
| 152 | 152 | Supply & fixing lamp holder PVC/Polycarbonate insulated body with back plate suitable for angle/batten fitting complete all as specified and directed. \n | item152 | 112 | Each |
| 153 | 153 | Supply and fixing retrofit LED bulb 10 watts , colour whight light complete all as specified and directed. \n\n\n | item153 | 112 | Each |
| 154 | 154 | Supply and fixing in replacement LED tube light fitting 1x20 watt fitting four feet length, 230 volts in commmercial channel with powder coated CRCA sheet housing with opal acrylic diffuser for LED with & including LED tubelight with high efficient LED 20 watts in aluminium housing with clear & milky diffuser including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed. Note:- LED fitting should have PF 0.9,CRI>70,L70. | item154 | 168 | Each |
| 155 | 155 | Supply and fixing in replacement LED mirror light fitting one feet long, 5 watts LED batten, cool day light for mirror & as wall light application with and including LED lamp duly connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and directed. | item155 | 42 | Each |
| 156 | 156 | Supply and fixing in replacement LED light fitting two feet long, 10 watts LED batten, cool day light for mirror & as wall light application with and including LED lamp duly connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and directed. | item156 | 42 | Each |
| 157 | 157 | Supply and fixing in replacement Bulk head LED fitting 10 watts fixed to wall/ceiling with FI clamps, nuts, bolts, washers etc with and including LED lamp 10 watts and connecting with twin core twisted flexible copper conductor cable of suitable size not more than One mtr and making necessary connection to make it functional complete all as specified and directed.\n | item157 | 42 | Each |
| 158 | 158 | Supply and fixing in replacement LED street/ building security light fitting 25 watt new generation energy saving & environment friendly long life versatile pressure die cast aluminium housing with heat resistance toughned glass,IP 66 protection, electronic driver , fixed with wall/surface by providing suitable size of security light mounting bracket made of 40mm bore GI pipe medium grade of length not less than 1.00 mtr, bent to shape with minimum one bend and nuts, bolts,washers etc, making necessary connections with suitable size copper wire from junction box to make it functional complete all as specified and directed.\nNote : GI pipe bracket should be duly painted with two coat of aluminium paint over & including a coat of zinc oxide primer. The quoted rate shall deemed to included for painting. | item158 | 42 | Each |
| 159 | 159 | Supply & fixing heavy duty exhaust fan, single phase, 230/240 volt, 300mm sweep, turbo force, 1400 RPM, totally enclosed heavy duty motor with copper winding including mounting brackets for fixing with & including cutting holes of suitable size in wall, grouting of nuts and bolt etc required for fixing fan , making good the disturbed portion in cement mortar 1:3 to match with the existing surface and making connetions with twisted copper flexible wire 23/0.0076mm to make it functional complete all as specified and directed.\nNote :-\n(i) The outer side of hole should be packed with wire mesh of weight not exceeding 2.00 kg per sqm as directed by Engineer-in-charge and quoted rate deemed to be included for this aspect.\n(ii) The exhaust fan, making hole & wire mesh shall be considered as one unit.\n | item159 | 28 | Each |
| 160 | 160 | Supply and fixing in replacement MS sheet 1.00mm thick, louver shutter for exhaust fan, suitable size for up to 350mm sweep with all accessories, fixing on wall complete all as specifed & directed. | item160 | 42 | Each |
| 161 | 161 | Supply and fixing in replacement decorative LED gate light fitting 40 watts made up of high grade unbreakable polycarbonate materials including LED lamp 40 watts and connecting with twin core twisted flexible copper conductor cable of suitable size not more than one mtr and making necessary connection to make it functional complete all as specified and directed.\n | item161 | 10 | Each |
| 162 | 162 | M&L in replacement sub main wiring with four single core FRLS, PVC insulated cable,1100 volts grade, 16 sqmm nominal cross sectional area stranded copper conductor and two single core green FRLS, PVC insulated 10 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering complete all as specified and directed. \nNote :- Four runs of 16 sqmm cable alongwith two run of 10 sqmm cable as earth wire with conduit shall be measured as one length. | item162 | 350 | RM |
| 163 | 163 | M&L in replacement sub main wiring with two single core FRLS, PVC insulated cable,1100 volts grade, 6 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated 4.0 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering complete all as specified and directed. \nNote :- Two runs of 6 sqmm cable alongwith One run of 4.0 sqmm cable as earth wire with conduit shall be measured as one length. | item163 | 360 | RM |
| 164 | 164 | Supply and fixing in replacement sheet metal enclosures powder coated deep drawn DB with clad socket & plug top duly installed netral link adjustable din rail and connecting link with and including one single pole neutral MCB 32 Amp, 'B' curve 240 volts, 10 kA complete all as specified and directed. | item164 | 28 | Each |
| 165 | 165 | Supply and fixing vertical load line TPN pre-wired distribution board, double door type, 6 way, TPN DB, 415 volt with and including MCCB as incomer and MCBs as required for outgoing with 125 Amps rated bus bar and common neutral link with MCB & with blank plate, flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed and shall consisting of the following:-\nIncoming:- MCCB 125 Amp, four pole 415 Volts, breaking capacity 16 KA, fixed thermal & magnetic setting-01 Nos.\nOutgoing:- \n(i) MCB SP 'B' series 32 amps, 230 volts, 50Hz - 03 Nos.\n(ii) MCB SP 'B' series 16 amps, 230 volts, 50 Hz - 06 Nos\n(iii) MCB SP 'B' series 6-10 amps, 230 volts, 50 Hz - 09 Nos | item165 | 13 | Each |
| 166 | 166 | Supply and fixing in replacement sheet metal enclosure for MCB DBs ,230 volt, single pole and neutral, distrubution board, IP 43 protection, with 200 Amps rated copper bus bar and neutral link,12 way, double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and directed.\n | item166 | 2 | Each |
| 167 | 167 | Supply and fixing in replacement sheet metal enclosure for MCB DBs ,230 volt, single pole and neutral, distrubution board, IP 43 protection, with 200 Amps rated copper bus bar and neutral link, 8 way, double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and directed.\n | item167 | 14 | Each |
| 168 | 168 | Supply and fixing in replacement sheet metal enclosure for MCB DBs ,230 volt, single pole and neutral, distrubution board, IP 43 protection, with 200 Amps rated copper bus bar and neutral link, 4 way, double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and directed.\n | item168 | 10 | Each |
| 169 | 169 | Supply and fixing in replacement MCB, SPN, 32/40 Amp, B curve, 10 kA capacity, 240 volts complete all as specified and directed. | item169 | 26 | Each |
| 170 | 170 | Supply and fixing in replacement MCB, SP, 40 Amp, B curve, 10 kA capacity, 240 volts complete all as specified and directed. | item170 | 24 | Each |
| 171 | 171 | Supply and fixing in replacement MCB, SP, 6 to 32 Amp, B curve, 10 kA capacity, 240 volts complete all as specified and directed. | item171 | 100 | Each |
| 172 | 172 | Supply and fixing call bell, ding dong type, 230 Volts, single phase complete all as specified and directed.\n | item172 | 28 | Each |
| 173 | 173 | Supply and fixing electric water heater storage type of capacity 50 ltrs, 2000 watts heating element, non corrosion tank, temperature adjustment knob, red & green indicators, NRV, ISI marked, 5 star rated including fixing arrangements with nuts and bolts, grouting with wall complete and making good distrubed surfaces of wall/floor etc, and including taking down and deposit to MES yard of existing unserviceable geyser 25/35 ltrs capacity complete all as specified and directed. | item173 | 14 | Each |
| 174 | 174 | S&F flexible hot water connection made of stainless steel thread braided on heavy duty PVC connection pipe, size 15 mm bore, 450mm long, for hot water connection for storage type water heater complete all as specified and directed. | item174 | 28 | Each |
| 175 | 175 | Supplying, installation, testing & commissioning in replacement floor mounted, cubical type, LT panel, outdoor type, factory made, CPRI approved, suitable for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of 40 x 40 x 6 mm angle iron frame and 3.15 mm thick CRCA sheet side covers with front and back hinged doors with proper locking arrangement, width of panel not less than 75cm, rubber gasket on front and back to make it dust and vermin proof, powder coated including 400 Amp rated aluminium busbar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system including bus bar chamber, danger notice plate, wiring with suitable size of copper cable, suitable power factor capacitors, mounted on PCC 1:2:4 type B-1 (with 20 mm graded stone aggregate) foundation block of suitable size upto 40 cm above ground level complete with the following accessories all as specified and directed:- \n(a) 04 strips of aluminium bus bar with insulation colour sleeves of capacity 400 Amp fixed on PVC heat shrinkable insulator heavy duty.\n(b) Volt meter 0-500 volts, digital type, panel mounted, flush type, three phase of size 96x96mm complete with built in selector switch-01 No\n(c) Volt meter 0-200 volts, digital type, panel mounted, flush type, three phase of size 96x96mm complete with built in selector switch with suitable size of CT-01 No\n(d) Indicator lamp LED type on all phases (R,Y,B)-03 Nos\n(e) Incoming MCCB 315 Amp, 415 Volts, 35 KA, 4 pole, 3 phase, with adjustable thermal & fixed magnetic setting - 01 No.\n(f) Outgoing MCCB-100 amps, breaking capacity 25 kA rating - 05 Nos.\n(g) Outgoing MCB SPN 32 Amps, breaking capacity 10 kA rating - 01 No. \n(h) Providing space & electric energy meter with energy meter TPN 8 wire, 415 volts with locking arrangement, glass arrangement for taking reading etc - 04 Nos.\nNote :-\n(i) The cost of the PCC block shall be deemed to be included in the unit rate quoted for the item.\n(ii) The layout diagram of LT panel shall be approved by GE before placing the order by GE.\n(iii) The LT panel shall be confirming to IS-8623.\n\n | item175 | 4 | EACH JOB |
| 176 | 176 | Material and labour for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to GI earth wire 4.0 mm upto 7.5 mtrs long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly including watering pipe GI 15 mm bore, light grade including protection pipe GI light grade 20mm bore , wire mesh, funnel,lugs, salt, charcoal dust, excavation & earthwork in soft/losse soil and refilling pit chamber with PCC 1:2:4 type B1 using 20 mm graded mechnically crushed stone aggregates , RCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates pit cover slab 50 mm thick reinforced with 8 mm dia TMT bars @ 15 cm c/c both ways including necessary form work all as shown in electrical plate No 3 of SSR part-I (2009), including testing on completion on site complete all as specified and as directed. \n | item176 | 13 | Each job |
| 177 | 177 | Material and labour for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to GI earth lead strip 32x6 mm upto 7.5 mtrs long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly including watering pipe GI 20 mm bore, light grade including protection pipe GI light grade 40mm bore , wire mesh, funnel,lugs, salt, charcoal dust, excavation & earthwork in soft/losse soil and refilling pit chamber with PCC 1:2:4 type B1 using 20 mm graded mechnically crushed stone aggregates , RCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates pit cover slab 50 mm thick reinforced with 8 mm dia TMT bars @ 15 cm c/c both ways including necessary form work all as shown in electrical plate No 3 of SSR part-I (2009), including testing on completion on site complete all as specified and as directed. \nNotes for Srl item 176.00 & 177.00 :- \n(i) Any variation in length of earth lead and protection pipe of earth lead shall be adjusted through DO.\n(ii) On testing if the earth resistance is not obtained, earthing will be generated at No extra cost, till the desired earth resistance is obtained.\n(iii) The chamber shall be constructed atleast 0.5 mtr away from the earth electrode.\n | item177 | 4 | Each job |
| 178 | 178 | Supplying, laying, jointing, testing and commissioning in replacement under ground LT XLPE electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 50 Sqmm 3.5 core conforming to IS- 7098 (Part I) 1988 as in trenches or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape, complete all as specified and directed. \n\n | item178 | 200 | RM |
| 179 | 179 | Supplying, laying, jointing, testing and commissioning in replacement under ground LT XLPE electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 16 Sqmm 2 core conforming to IS- 7098 (Part I) 1988 as in trenches or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape, complete all as specified and directed. \nNote for Srl item No 178.00 to 179.00:- Excavation & earth work, sand cushioning, protection pipes, end termination joints & protection covers shall be measured and paid separately.\n | item179 | 300 | RM |
| 180 | 180 | Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed. | item180 | 19 | Cum |
| 181 | 181 | Supply and laying old size, sub class 'B' bricks, laid flat for protection of cable , adjacent to each other, perpendicular to central axis of cable complete all as specified and as directed. | item181 | 3200 | Each |
| 182 | 182 | Taking down carefully existing ceiling fan and exhaust fan any size/sweep deposit to MES yard and re-hanging the same after complete rewiring including transport and connecting fan with 2 core flexible copper cable 23/0.0076 of required length connecting with ceiling rose complete all as directed & directed | item182 | 84 | Job |
| 183 | 183 | Supply and fixing ceiling fan, copper winded complete with accessories, 1200 sweep, colour white, minimum 3 star rated and including hanging, connecting with existing point complete all as specified & directed. | item183 | 14 | Each |
| 184 | 184 | Deduction of Total of Sch of credit amount Rs 249446.70 |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
