Development Work At Panthika Khandagiri
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Apr 2021
0 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Rate Contract
Location / State
KHANDAGIRI → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Development Work At Panthika Khandagiri
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Mar-2021 | Development work at Panthika Khandagiri | Date | 08-Apr-2021 |
| 2 | 06-Apr-2021 | Development work at Panthika Khandagiri | Technical Bid | 08-Apr-2021 |
BOQ
| Name of Work: Developmental work at Panthika Khandagiri. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CAFETERIA | |||
| 2 | 2 | Dismantling of dilapilated structure of size (22mx7.5mx3.3m) and (10mx9mx3m) removing of debris by mechanical means including stacking the useful materials for reuse and removing the debris within 50m lead as directed by the Engineer-in-charge. | 28 | Each hour | |
| 3 | 3 | Supplying all labour, T&P for the Carriage of debries by mechanical means within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. | 140 | Cum | |
| 4 | 4 | Earthwork in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. | 87.22 | Cum | |
| 5 | 5 | Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). | 107.84 | Cum | |
| 6 | 6 | Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland slag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge. | 54.56 | Cum | |
| 7 | 7 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. | |||
| 8 | 7.01 | Foundation | 10.53 | Cum | |
| 9 | 7.02 | Plinth beam | 9.13 | Cum | |
| 10 | 8 | Providing & fixing TOR Fe-500D grade reinforcement bars of approved makes as per IS 1786 for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) | 24 | Qntl | |
| 11 | 9 | Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. | 46 | Cum | |
| 12 | 10 | Brick work in Superstructure with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. | 8 | Cum | |
| 13 | 11 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. | 52.56 | Sqm | |
| 14 | 12 | Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge. | 18 | Sqm | |
| 15 | 13 | Providing kota stone flooring using kota stone of approved quality, colour and size of 20mm minimum thick in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the kota stone with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the kota stone, if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. | 213.16 | Sqm | |
| 16 | 14 | Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. | 52.56 | Sqm | |
| 17 | 15 | Providing and fixing of Light Steel Structure Wall frame made of high galvanized steel of thickness 0.95 mm as per final requirements duly supplied with punching dimples for screws and provision of electrical and plumbing conduits etc in standard C- section cold rolled steel in size of 90x37x11mm (web x flange x lip) for wall and roof studs with minimum AZ-150 or 275 gsm coating of zinc for anti-rusting and 550 MPa of yield strength i/c provisions for lip notches, lip cuts, web notches through highly précised machines. Provision for service web holes of 25mm dia along the walls completed etc as per direction of Architect in charge. | 3650 | Kg | |
| 18 | 16 | Providing and fixing of Hot finished welded type tubes. Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete as per the direction of Architect in Chage. | 5238 | Kg | |
| 19 | 17 | Providing and fixing of mild steel lipped sections for the walls and roof light steel panels made of mild steel of thickness 3 mm as per final requirements duly supplied with punching dimples for screws and provision of electrical and plumbing conduits etc in standard C- section hot rolled steel in size of 90x45x18mm (web x flange x lip) for wall and roof studs with coating of PU paint for anti-rusting and 350 MPa of yield strength i/c provisions for lip notches, lip cuts, web notches through highly précised machines conforming to IS 2062. Provision for service web holes of 25mm dia along the walls. | 2640 | Kg | |
| 20 | 18 | Supplying and installation of fire resistant 16 mm thick Heavy duty fiber cement board (High pressure steam cured) for internal floors conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm all work complete as directed by the Architect-in-charge. | 116 | Sqm | |
| 21 | 19 | Eco Boards:-Eco-Boards are made from agricultural waste such as straw, reeds, wheat, rice, corn, cotton stalks, soybean, sorghum, flax, fruit tree twigs, branches and trimmings which are an ecological alternative to chipboard, MDF, OSB, and Plywood with the benefit of a negative carbon footprint. Eco-boards are versatile and can be used for a wide range of applications including furniture and interiorsSizes-.9mm and 18mm, Strength-Bending Strength (MPa)\t= 13\t38,3 | 885 | Sqm | |
| 22 | 20 | Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3,100 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-in- Charge. | 325 | Sqm | |
| 23 | 21 | Providing and fixing in all exterior face panels over eco boards and under 16mm cement fiber boards, breathable vapour barrier as per National Building Code 2009 complete as per direction of Engineer- in-charge. | 620 | Sqm | |
| 24 | 22 | Providing and fixing of Galvanised steel exterior cladding powder coated as per color choice of client with external durability of size 260 x 19mm with 0.75 thickness, bended with interlocking mechanism and fixed with hidden plastic clamps and screws. Complete with all roof angles and flashings. | 353 | Sqm | |
| 25 | 23 | Providing and fixing of Pine wood cladding for internal walls and ceiling of size 110 x 12mm thickness, properly kiln dried and fixed with adhesives and headless nails over eco boards. Finally coated with sealers for smooth finishing. | 390 | Sqm | |
| 26 | 24 | Providing and fixing of Thermo Pine wood cladding for external walls and ceiling of size 140 x 19mm thickness, properly kiln dried and thermo treated. Fixed with screws over water proofing membranes. Finally coated with weather proof water based polish for external durability.is a beautiful, sustainable wood material produced by using natural methods, heat and steam. Thermal modification improves the wood's properties, thereby expanding the range of applications in which the wood can be used. ... Due the wood material is 100% resin free, is also suitable for saunas. | 145 | Sqm | |
| 27 | 25 | Providing and fixing of Thermo Pine wood decking for external floor area of size 140 x 25mm thickness, properly kiln dried and thermo treated. Fixed with screws with atleast 5-10mm gap in between for rain water. Finally coated with weather proof water based polish for external durability. | 96 | Sqm | |
| 28 | 26 | Laminate Flooring:-Laminate flooring is a multi-layer synthetic flooring product fused together with a lamination process. Laminate flooring simulates wood | 80 | Sqm | |
| 29 | 27 | Providing vitrified tile flooring using double charged vitrified tiles of premium grade (of make Kajeria/Johnson/Nitco/OASIS or equivalent) having thick of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured / printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. | 106 | Sqm | |
| 30 | 28 | Providing and fixing factory made uPVC white colour fixed / sliding / casement windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality. Including toughened float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/Sqm) | 65 | Sqm | |
| 31 | 29 | Sanitary Installations | |||
| 32 | 30 | Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted rimless water closet of Hindware make having cat no 92528 or equivalent type of approved make including supply of matching P/S trap to the wall with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, 15mm dia connection pipe ALD 803 AB, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. | 4 | Nos | |
| 33 | 31 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 54x42x16.5cm dia of Hindware make having cat no 91046 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. | 8 | Nos | |
| 34 | 32 | Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 900mm x 600mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. | 9 | Nos | |
| 35 | 33 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-KUP 35053PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. | 16 | Nos | |
| 36 | 34 | Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-KUP 35041PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. | 4 | Nos | |
| 37 | 35 | Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. | 4 | Nos | |
| 38 | 36 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24\" of Jaquar Cat. No.-AKP 35711PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. | 4 | Nos | |
| 39 | 37 | Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.-AKP 35721P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. | 8 | Nos | |
| 40 | 38 | Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-AKP 35771P or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. | 8 | Nos | |
| 41 | 39 | Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-AKP 35731P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. | 12 | Nos | |
| 42 | 40 | Supplying all materials, labour, T&P and fixing toilet paper holder of Jaquar Cat. No.-AKP 35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. | 4 | Nos | |
| 43 | 41 | Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge | 12 | Nos | |
| 44 | 42 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. | |||
| 45 | 42.01 | 20 mm dia | 25 | Rmt | |
| 46 | 42.02 | 32mm dia | 100 | Rmt | |
| 47 | 42.03 | 50mm dia | 40 | Rmt | |
| 48 | 43 | Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. | |||
| 49 | 43.01 | 110mm dia pipe | 50 | R.M | |
| 50 | 44 | Supplying all materials, labour, T&P and fixing SS Sink without Drain board Nirali Elegance Ultra or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. | 2 | Nos | |
| 51 | 45 | Supplying all materials, labour, T&P and fittings and fixing of 15 LITER GYSER Bajaj / Havels/Usha etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. | 1 | Nos | |
| 52 | 46 | Construction of RCC septic tank for 20 user (Size 2.30m x 1.80m x 1.50m, 150mm thick wall) with provision of baffle wall, CFRC cover, iron step including MS reinforcement, earth work, PCC, sand filling as per approved drawing etc. complete including cost of curing and royalty, cost, conveyance etc. all complete as per specification & direction of EIC. | 1 | Nos | |
| 53 | 47 | Supplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) | 2 | Nos. | |
| 54 | 48 | Gazebo & Stage | |||
| 55 | 49 | Dismantling and removing 2.5cm thick artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50m lead. | 172.89 | Sqm | |
| 56 | 50 | Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead. | 24.63 | Sqm | |
| 57 | 51 | Earthwork in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. | 18.94 | Cum | |
| 58 | 52 | Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). | 2.86 | Cum | |
| 59 | 53 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. | 2.86 | Cum | |
| 60 | 54 | Providing, lifting, hoisting and laying Reinforced cement concrete of different RCC structure of M-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. | |||
| 61 | 54.01 | Foundation | 6.15 | Cum | |
| 62 | 54.02 | Plinth beam | 2.25 | Cum | |
| 63 | 55 | Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. | 11.96 | Cum | |
| 64 | 56 | Providing and laying plain cement concrete of (1:2:4) in foundation bed and floors using 12 mm. Size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required for the work etc complete as per the instruction of the Engineer-in-Charge. | 16.72 | Cum | |
| 65 | 57 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. | 50.88 | Cum | |
| 66 | 58 | Providing 20mm thick and above 0.40 Sqm size granite tile flooring in platform, staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. | 255.83 | Sqm | |
| 67 | 59 | Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three Nos of groove over tread etc. complete including cost, conveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. | 60 | Rmt | |
| 68 | 60 | Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. | 50.88 | Sqm | |
| 69 | 61 | Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90Rmt C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect. | 945 | Kg | |
| 70 | 62 | Construction of Gazebo | |||
| 71 | 63 | Providing and fitting TATA circular/ square/ rectangular Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position etc complete as per the approved drawing & design and direction of engineer-in-charge. (Only Cost of foundation bolt, hoisting, fitting, fixing & welding as per requrement will be paid. Column & trusses will be supplied by the Deptt.) | 2255.36 | Kg | |
| 72 | 64 | Installation of seam type 12mm Poly carbonate sheet Danpalon or equivalent with structural work & fixing of both side UV uponsat seam 12 x 900mm panel. (Only cost of fitting, fixing self tap screw , S S Connector complete with accessories like Hip, Apex, caping edge channel etc. will be paid. Seam type 12mm Poly carbonate sheet Danpalon or equivalent with structural work & fixing of both side UV uponsat seam 12 x 900mm panel will be supplied by the Deptt.) | 50 | Sqm | |
| 73 | 65 | Supplying, fitting and fixing of color coated trapezoidal sheet TRIMDEK 1015 profile sheet from TATA BLUESCOPE STEEL or any approved equivalent. The base metal sheet of 0.45mm thick. High Tensile steel with minimum 550MPa yield strength, metallic hot dip coated with aluminum zinc alloy of 55% aluminum 45% Zinc as per AS 1397 – Zincalume® AZ 150 (minimum 150grams as per square meters, total on both sides) with COLORBOND® - Polyester Based quality Paint conforming to AS/NZS 2728 class 3. The paint shall have a total coating thickness of nominal 35 micron (Nominal 20micron exterior coat on top surface and nominal primer coat) on both surfaces with approved color shade etc. complete. Accessories – Fasteners: The steel sheet shall be fastened with min.40Pm zinc coated or min 20Pm Zinc-Tin alloy coated, Hex head, self-drilling screw as per AS 3566 class 3 fasteners of approved make (Buildex of equivalent) with EPDM washer on each crest of sheet for connecting with purlin (or as per design) perpendicular to the sheeting and in the center of the corrugation of rib including cost of all materials, labour, all taxes, sundries, T & P and transportation complete in all respect as per design and drawing as directed by the Engineer-in- charge. | 20 | Sqm | |
| 74 | 66 | Providing and painting two coats with synthetic enamel paint over a coat of red oxide primer of approved quality and approved shade confirmming to ISI on Iron work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. | 90 | Sqm | |
| 75 | 67 | SELFIE POINT | |||
| 76 | 68 | Earthwork in excavation of foundation trenches in all kinds of soil including moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. | 6.07 | Cum | |
| 77 | 69 | Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). | 16.19 | Cum | |
| 78 | 70 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. | 3.15 | Cum | |
| 79 | 71 | Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. | 7.19 | Cum | |
| 80 | 72 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. | 20.44 | Sqm | |
| 81 | 73 | Supplying and laying of heavy duty factory made hydraulically pressed and mechanically compacted pre-cast interlocking pavers of 40mm thick, preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. | 28.44 | Sqm | |
| 82 | 74 | Providing and Fixing white fiber made Selfie point ( I Love KHANDAGIRI of 6 feet height ) as per design and specification with artifical tree and seven numbers wild Monkey on it as per the direction of The architect | 12 | Nos | |
| 83 | 75 | PARKING | |||
| 84 | 76 | Providing and laying factory made chamfered edge Cement Concrete\npaver blocks in footpath, parks, lawns, drive ways or light traffic\nparking etc, of required strength, thickness & size/ shape, made by\ntable vibratory method using PU mould, laid in required colour &\npattern over 50mm thick compacted bed of sand, compacting and\nproper embedding/laying of inter locking paver blocks into the sand\nbedding layer through vibratory compaction by using plate vibrator,\nfilling the joints with sand and cutting of paver blocks as per required\nsize and pattern, finishing and sweeping extra sand. complete all as\nper direction of Engineer-in-Charge.\n60 mm thick cement concrete paver block of M-35 grade\nwith approved colour, design & pattern. as per requirement and direction from architect | 1469 | Sqm | |
| 85 | 77 | Landscaping work with planting of all kinds and diameter of trees in campus, with OTDC logo | |||
| 86 | 78 | Reclamation of works like cleaning of total area, cleaning of unwanted shrubs, stumps uprooting rank, vegetation, unwanted grass, wood, twigs, breaking clods, tilling of area, dumping of above materials at required spots, lifting of the above materials from the garden area of the premises to outside by mechanical means including loading & unloading charges as per the instruction of Officer-in-charges. | 5000 | Sqm | |
| 87 | 79 | Supply of good quality garden soil preferably red alluvial /sandy loam with texture neither too coarse nor too fine with a fair degree of water retaining capacity sufficiently porous for microbial activity, containing adequate humus with a Ph range from 6.5 to 7.5 should be free from any undesirable inorganic materials like wastages of construction, roots and bushes of wild plants, polythene, garbage etc., to be collected after duly screened including cost, conveyance, royalty, taxes and other charges with labour and T & P charges for loading, unloading and stacking at site in the separate heaps of ( 1.5 x 1.5x 0.5) cum or its multiples taken into 1(one) cum for measurement and payment purposes and completed in all respect for the park. | 1500 | Cum | |
| 88 | 80 | Lifting & spreading of good soil uniformly over the surface area as per landscape design /advice of the site in-charge. | 1500 | Cum | |
| 89 | 81 | Supply of cow dung manure, well decomposed, garbage free, one Tractor load including loading, unloading and delivery at site. | 600 | Cum | |
| 90 | 82 | Lifting & Spreading of manure uniformly as per the direction of site in-charge. | 600 | Cum | |
| 91 | 83 | Hoeing of soil & manure spreaded For smooth mixing in the upper Surface & leveling, dressing for grassing the area as per the instruction of Officer in-charge | 600 | Sqm | |
| 92 | 84 | Supply of Bermuda bent grass / Zoicia japonica / shade loving grass well grown disease free, carpet formed, 2” thickness including loading and unloading and delivery at site including cost of all materials, transportation etc complete as per direction of Engineer-in-charge. | 4200 | Sqm | |
| 93 | 85 | Supply of Broad Leaf grass well grown disease free including loading and unloading and delivery at site including cost of all materials, transportation etc complete as per direction of Engineer-in-charge. | 200 | Sqm | |
| 94 | 86 | ELECTRICAL WORKS | |||
| 95 | 87 | Wiring to light points/fan point/exhaust fan point/Call bell point with 1.5-Sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible condute with 6Amp, 250V Modular Switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) | |||
| 96 | 87.01 | Group-A | 8 | Nos | |
| 97 | 87.02 | Group-B | 12 | Nos | |
| 98 | 87.03 | Group-C | 12 | Nos | |
| 99 | 88 | Supply and fixing of 6Amp plug with 6amp switch on existing board (Modular type ISI marked) | 4 | Nos | |
| 100 | 89 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (convinient power) (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) | 10 | Nos | |
| 101 | 90 | Supply and fixing of ISI marked modular type 2Nos 6Amp plug with switch on suitable size of metal box and modular cover in front on surface or recess including all conection. | 6 | Nos | |
| 102 | 91 | Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp plug with switch with all conection. | 2 | Nos | |
| 103 | 92 | Supply& fixing of Modular type 25 Amp socket outlet for AC point with metal box and modular cover. | 5 | Nos | |
| 104 | 93 | Supply& fixing of Modular type 32 Amp DP switch for AC point with metal box and modular cover. | 5 | Nos | |
| 105 | 94 | Submains: | |||
| 106 | 95 | Recessed/surface submain wiring alongwith earth wire with the following size of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in required dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) | |||
| 107 | 95.01 | 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. | 65 | Rmt | |
| 108 | 95.02 | 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. | 35 | Rmt | |
| 109 | 95.03 | 2 x 6.0 sq.mm. + 1 x 2.5 sq.mm. | 120 | Rmt | |
| 110 | 95.04 | 4 x 4.0 sq.mm. + 2 x 2.5 sq.mm. | 35 | Rmt | |
| 111 | 95.05 | 4 x 10.0 sq.mm. + 2 x 4.0 sq.mm. | 25 | Rmt | |
| 112 | 96 | TV/Telephone Wiring: | |||
| 113 | 97 | Supply, delivery, installation, testing and commssioning of modular type TV Antenna/Telephone Outlet Boards containing a ISI marked Modular TV Antenna/Telephone Socket fixed on Modular Concealed Box including connections and making good the damages caused complete as required and as per Dierction of Engineer-In-Charge. | 2 | Nos. | |
| 114 | 98 | Supplying and drawing TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in existing surface / recessed steel / PVC conduit as required. | 45 | Rmt | |
| 115 | 99 | Supplying and drawing 2 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed steel / PVC conduit as required. | 25 | Rmt | |
| 116 | 100 | Supply and Installation of 6way Double door VTPN Distribution Board with incoming -100A MCCB-1No & 63A 4Pole MCB-2Nos and 40A MCB-2Nos Make-Legrand, L&T &Havells etc complete. | 1 | Nos | |
| 117 | 101 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized andpowder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) 4 WAY (4 + 12) DOUBLE DOOR, HORIZONTAL TYPE | 2 | Nos | |
| 118 | 102 | Supply and fixing of 63 Amp4 pole MCB etc complete | 2 | Nos | |
| 119 | 103 | Supply and fixing of SP 5 amp to 32 amp rating 240 V \"B\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.\nSINGLE POLE | 18 | Nos | |
| 120 | 104 | Supply ,Installation, Testing and Commissioning of 0.5Rmt high 8 Watt Bollard light | 20 | Nos | |
| 121 | 105 | Supply and installation of 9wt. spike light make-jaquar | 20 | Nos | |
| 122 | 106 | cable & earthing | |||
| 123 | 107 | Supply and layinig of 3.5core 25 SqmmMV cable laying from upto 25 sq.mm in ground Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. | 65 | Rmt | |
| 124 | 108 | Supply and laying of 6Sqmm x 2 core armured MV cable laying from upto 25 sq.mm in ground Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. 2core 6 Sqmm | 220 | Rmt | |
| 125 | 109 | Supply of materials and installation of chemical earthing size of chemical earth bar 2 Rmt, size of earth pit 3' X 2' X 9' chemical compound to be used 50 kg. There is an arrangements for termination of copper strip of earth continuity conductor including cost of water pouring arrangements, brick masonary enclosure on top with removable cast iron cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. | 2 | Nos. | |
| 126 | 110 | Supplying and laying 25 mm x 5 mm GIstrip on surface or in recess for connection etc as required. | 10 | Rmt | |
| 127 | 111 | Supply, delivery, installation, testing & commissioning of 12 watt Slim-Fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology. An ideal solution where ceiling voids are limited but high lumen output is required. (Make: Bajaj/ Philips/ Havells/ Wipro) | 20 | Nos. | |
| 128 | 112 | Supply, delivery, installation, testing & commissioning of 6 watt adujustable low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology. An ideal solution where ceiling voids are limited but high lumen output is required. (Make: Bajaj/ Philips/ Havells/ Wipro) | 10 | Nos. | |
| 129 | 113 | Supply, delivery, installation, testing & commissioning of Flexible LED strip uses high brightness SMD LED as the light source for indoor application only. It is highly suitable for cove-lighting, decorative lighting etc each lenth of the strip is 5 Rmt (Make: Bajaj/ Philips/ Havells/ Wipro) | 8 | Nos. | |
| 130 | 114 | Supply, delivery, installation, testing & commissioning of BEE Star rated 1200mm sweep cealing fan Nssp390 (Crompton/ Orient/ Havells/ Bajaj) | 8 | Nos. | |
| 131 | 115 | Supply, delivery, installation, testing & commissioning of plastic Ventilation fan 250mm sweep (Crompton/ Havells/ Bajaj) | 4 | Nos. | |
| 132 | 116 | Supply, delivery, installation, testing & commissioning of Basic all purpose surface and wall mounted 10 watt LED Industrial batten with Aluminum housing & integrated electronic driver having THD<20%. (Make: Bajaj/ Philips/ Havells/ Wipro) | 8 | Nos. | |
| 133 | 117 | 1.0 TR 3 Star Split AC (Toshiba without piping kit) | 1 | Nos. | |
| 134 | 118 | 1.5 TR 3 Star Split AC (Toshiba without piping kit) | 2 | Nos. | |
| 135 | 119 | 2.0TR 2 Star Split AC (Toshiba without piping kit) | 2 | Nos. | |
| 136 | 120 | Installation of Split A.C | 5 | Nos. | |
| 137 | 121 | Supply of copper pipe electric cable with drain pipe etc complete . | 35 | Rmt | |
| 138 | 122 | MS Outdoor Stand | 5 | Nos. | |
| 139 | 123 | Voltage Stabilizer 4 KVA | 3 | Nos. | |
| 140 | 124 | Voltage Stabilizer 5 KVA | 2 | Nos. | |
| 141 | 125 | Supply,installation, testing & commissioning of IP CAMERA INDOOR 2MP (CP Plus ) | 6 | Nos. | |
| 142 | 126 | Supply, installation, testing and commissioning of IP CAMERA OUTDOOR 2MP (CP Plus ) | 4 | Nos. | |
| 143 | 127 | Supply, installation, testing and comissioning of NVR 16 PORT CP Plus ) | 1 | Nos. | |
| 144 | 128 | Supply, installation, testing and comissioning of hard disc 4TB per NVR (TOSHIBA | 1 | Nos. | |
| 145 | 129 | Supply, installation, testing and comissioning of SWITCH 16 port POE (NETGEAR) | 1 | Nos. | |
| 146 | 130 | Supply, installation, testing and comissioning of SMPS (16 CHANNEL) | 1 | Nos. | |
| 147 | 131 | Supply, installation, testing and comissioning of Back Box | 1 | Nos. | |
| 148 | 132 | Supply & drawing of CCTV Cables 3+1 in surface/ recessed existing PVC conduit as required. | 100 | Rmt | |
| 149 | 133 | Supply, installation, testing and comissioning of 43\" LED Andriod Smart TV (Samsung/LG) | 1 | Nos. |
AI Tender Summary
Tender Timeline
Apr 06, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 08, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2021
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 08, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 09, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender