| 1 | 1 | Mastic Asphalt\nProviding and laying 25 mm thick mastic asphalt wearing course on top of deck slab excluding prime coat with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 9.5 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces not less than 100 deg. C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 515. as per S.No 14.5 as per MORTH Specification 515 & 2702 (Rates are exclusive of GST to be paid extra but inclusive of labour cess) | BI01010001010000000000000515BI0100001113 | 4300 | Sqm |
|---|
| 2 | 2 | Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meters.(200 feet) As per SI No 708 (Rates are exclusive of GST to be paid extra but inclusive of labour cess) | BI01010001010000000000000515BI0100001118 | 1150 | sqm |
|---|
| 3 | 3 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sum).As per SL No 28 CPWD No 13.47.1 (Rates are exclusive of GST to be paid extra but inclusive of labour cess) | BI01010001010000000000000515BI0100001123 | 1150 | sqm |
|---|
| 4 | 4 | Two coat painting with hight gradede enamel paint on previously painted old wood or iron work including its sand papering rubbing and cleaning as required for proper completion of work.As per SI No 647(b)(Rates are exclusive of GST to be paid extra but inclusive of labour cess) | BI01010001010000000000000515BI0100001128 | 550 | sqm |
|---|
| 5 | 5 | Providing and laying of Hot applied thermoplastic compound 2.5 mm thick as per approved layout and design including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is excludive of surface applied glas beads as per MORT & H specification No 803. The finished surface to be level, uniform and free from streaks and holes rates to be inclusive of all taxes, roylaty, VAT etc. all T&P / material and labour required for proper completion of work As Per SL No 93 NS-4 (Rates are exclusive of GST to be paid extra but inclusive of labour cess) | BI01010001010000000000000515BI0100001133 | 120 | sqm |
|---|
| 6 | 6 | Supply & fixing of Linear Delineator System (LLS) panels made of Micro prismatic Retro Reflective sheeting dully laminated on thin aluminum foil to a unique corrugated shape to provide Retro Reflection across wide range of observation and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing MS railing through MS Sections welding as and when required (Rates are exclusive of GST to be paid extra but inclusive of labour cess) | BI01010001010000000000000515BI0100001138 | 8 | No |
|---|
| 7 | 7 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 2.00 mm thick area not exceeding 0.90 Sqm supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (Rates are exclusive of GST to be paid extra but inclusive of labour cess) | BI01010001010000000000000515BI0100001143 | 4 | No |
|---|
| 8 | 8 | Supply and fixing of Pavement marker (Cat Eye) Type X-ASTMD-4956-04 avery dennison/3-M (USA Mark) consisting of ASA plasting houring fitted with tightly adherent plotting compound. The hoursing shall cantain prismatic two glass coverd prismetic reflactive face to reflect incident light I/C all taxs (Rates are exclusive of GST to be paid extra but inclusive of labour cess) . | BI01010001010000000000000515BI0100001148 | 180 | No |
|---|
| 9 | 9 | Providing and applying tack coat with bitumen (VG-10)using bitumen pressure distributor at the rate of 0.4kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Speicification Clause 503 including cost of bitumen (VG-10) (Rates are exclusive of GST to be paid extra but inclusive of labour cess) | BI01010001010000000000000515BI0100001153 | 100 | Sqm |
|---|
| 10 | 10 | Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line grade and level to serve as wearing coarse on a previously Prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity finished to required lavel and grades to be followed by seal coat as per Techincal Specification clause 508 including cost of bitumen (Rates are exclusive of GST to be paid extra but inclusive of labour cess) | BI01010001010000000000000515BI0100001158 | 100 | Sqm |
|---|
