Supply Of 33 Kv Lightening Arrestor S/Stn.30Kv 10Ka ( Class Ii) Heavy Duty 11 Kv Lightening Arrestor S/Stn.Type 9Kv 10Ka Heavy Duty Danger Board 33Kv P G Clamp For 150 Sq Mm Conductor P G Clamp For 100 Sq Mm Conductor Danger Board 11Kv Male Female C, Hazaribag-Jharkhand

Supply Of 33 Kv Lightening Arrestor S/Stn.30Kv 10Ka ( Class Ii) Heavy Duty 11 Kv Lightening Arrestor S/Stn.Type 9Kv 10Ka Heavy Duty Danger Board 33Kv P G Clamp For 150 Sq Mm Conductor P G Clamp For 100 Sq Mm Conductor Danger Board 11Kv Male Female Contact Of 11 Kv Ab Switch 600 Amp Al Paint Red Oxide Paint 33 KV Pin Insulator(Polymer) with Pin Including support for jumper, 33 KV Disc. Insulator(Polymer) 70 KN with H/W, 11 KV Pin Insulator (Polymer) with Pin Including support for jumper, 11 KV disc Insulator Polymer 45 KN with H/W Fitting, Earthing (Chemical) with GI earthing pipe 40 mm 3.1 mtrs. Long (Bentonite as intermittent layers), 11 KV Earthing (Chemical) with earthing pipe 20 mm 1.2 mtrs. Long, 33 KV 3-core XLPE UG cable Heat shrinkable straight through Jointing kit suitable for 400 mm2, 33 KV 3-core heat shrikable Indoor Cable termination kit for 400mm2, 33 KV 3-core heat shrinkable Out door type Cable termination kit for 400mm2, 11 KV 3-core heat shrinkable Straight through Cable Jointing kit 300 mm2, 11 KV 3-core heat shrinkable Indoor Cable Jointing/termination kit 300 mm2, 11 KV 3-core heat shrinkable Outdoor Cable Jointing/termination kit 300 mm2, HDPE Pipe - 160mm /6 PE 63 grade, Stay set complete (1900x20 mm) with staywire 7/10 SWG 8 kgs & guy Insulator) LT Stay set complete (1700x16 mm) with stay wire 7/12 SWG Stay Set Complete for DSS with wire, Pre insulated mid span joint suitable 95 mm2 Phases Spring loaded distribution Bus Bar insulated Box for fixing on pole suitable for AB XLPE Cable and three phase connection 1 incoming and out going 3 phase connection as per field requirement Service main anchor clamp for proper support of service cable(4mm2 and 10 mm2) Route & Joint Indicating, M S Nuts & Bolts of different size 33 KV Pole top bracket for 60kg Rail Pole [GALVANIZED] (Unit Wt. 2.9 Kg.) 33 KV Back Clamp for top bracket [GALVANIZED] (Unit Wt. 1.79 Kg.) 33 KV V cross arm (100x 50x 6 mm) [GALVANIZED] (Unit Wt. 20.44 Kg.) Back clamp ( 50x6 mm) for 60kg Rail Pole[GALVANIZED] (Unit Wt. 1.79 Kg.) Support Clamp for V Cross Arm for 60kg Rail Pole[GALVANIZED] (Unit Wt. 1.79 Kg.) Back Clamp (50x6 mm)Jointing/ Packing piece for 60kg Rail Pole [GALVANIZED] (Unit Wt. 1.79 Kg.) GI Wire No. 8 for earthing 33 KV Back Clamp for line DP Channel [GALVANIZED] (Unit Wt. 1.79 Kg.) 33 KV D.P Channel support clamp (50x6 mm) [GALVANIZED] (Unit Wt. 1.79 Kg.) 33 KV D.P Channel (100x50x6 mm) 1.3 Meter long [GALVANIZED] (Unit Wt. 53.00 Kg.) Earth clamp for earthwire (50 x 6 mm) [GALVANIZED] (Unit Wt. 1.5 Kg.) 11kv Pole Top Bracket 50x8 mm flat [GALVANIZED] (Unit Wt. 2.1 Kg.) 11 KV Back Clamp for top bracket [GALVANIZED] (Unit Wt. 1.00 Kg.) 11 KV V cross arm (75x 40x 6 mm) [GALVANIZED] (Unit Wt. 10.93 Kg.) 11 KV Back Clamp for V cross arm [GALVANIZED] (Unit Wt. 1.00 Kg.) Support Clamp for 11 KV V Cross Arm [GALVANIZED] (Unit Wt. 1.00 Kg.) GI Wire No. 10 for earthing 11 KV Back Clamp for line DP Channel [GALVANIZED] (Unit Wt. 2.24 Kg.) 11 KV D.P Channel support clamp (50x6 mm) [GALVANIZED] (Unit Wt. 2.24 Kg.) 11 KV D.P Channel (100x50x6 mm) 1.3 Meter long [GALVANIZED] (Unit Wt. 32.00 Kg.), Angle/side Stay Clamp ( 50x6 mm) for 8 mtr 200kg PSC Pole[GALVANIZED] (Unit Wt. 1.79 Kg.) Clamp (50 x 6 mm Flat) for Top Channel [GALVANIZED] (Unit Wt. 2.16 Kg.) Clamp (50 x 6 mm) for AB switch base channel [GALVANIZED] (Unit Wt. 4.32 Kg.) 11 KV Angle stay clamp (50 x 10 mm) [GALVANIZED] (Unit Wt. 1.9 Kg.) MS Channel (100x50x6 mm) for 11 KV AB switch [GALVANIZED] (Unit Wt. 53.44 Kg.) 11KV Top Channel (100x50x6) 9.56 kg per meter [GALVANIZED] (Unit Wt. 53.44 Kg.) MS Angle for L T distribution bus (35 x 35 x6 mm) [GALVANIZED] (Unit Wt. 18.00 Kg.) Transformer Base Channel (100x50x6 mm) [GALVANIZED] (Unit Wt. 53.44 Kg.) MS Channel (75x40x6 mm)for supporting H.G fuse & L.A [GALVANIZED] (Unit Wt. 49.83 Kg.) Transformer belting (50x50x6 mm) & belting support (40x40x6 mm)[GALVANIZED] (Unit Wt. 30.86 Kg.) Clamp (50 x 6 mm) for Transformer base channel [GALVANIZED] (Unit Wt. 4.32 Kg.) Clamp (50 x 6 mm) for Transformer belting [ GALVANIZED] (Unit Wt. 2.16 Kg.) Clamp (50 x 6 mm) for LT bus & H.G fuse set [ GALVANIZED] (Unit Wt. 2.5 Kg.) GI Wire No. 8 MS Flat (75x40x6 mm)[ GALVANIZED] (Unit Wt. 2.40 Kg.), 11 KV D.O. Fuse unit.

Refer document

Refer document

Refer document