Repair Of Centrifugal Pump Coupled With 375 Hp Slipring Motor , Repair Of Ocb , Junction Box And Other Allied Works At Water Works Sec 26 , Chandigarh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Mar 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
→ Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of Centrifugal Pump Coupled With 375 Hp Slipring Motor , Repair Of Ocb , Junction Box And Other Allied Works At Water Works Sec 26 , Chandigarh
BOQ
| Name of Work:REPAIR OF CENTRIFUGAL PUMP COUPLED WITH 375 HP SLIPRING MOTOR, REPAIR OF OCB, JUNCTION BOX AND OTHER ALLIED WORKS AT WATER WORKS SEC 26, CHANDIGARH (CH TO REVENUE HEAD) APPROX. AMOUNT : Rs. 2,15,100/- EMD : NIL TIME LIMIT : 15 Days | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Repair of single stage centrifugal pump coupled with 375 HP slipring motor by replacement of following defective parts installed at bed No 3 Jyoti side at water works sec 26 , Chd | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.01 | Providing and fixing of gun metal sleeves as per existing size with machining etc complete in all respects | 2 | Nos | |
| 3 | 1.02 | P/F of gun metal, neck ring i/c cost of machining etc | 2 | Nos | |
| 4 | 1.03 | P/f of gun metal check nut i/c the cost of machining etc | 4 | Nos | |
| 5 | 1.04 | Providing and fixing of gun metal alignment bush complete in all respects | 2 | Nos | |
| 6 | 1.05 | Dismantling of impellor with the help of hydraulic press for providing and fixing of cutter key etc complete in all respects | 1 | Nos | |
| 7 | 1.06 | Remetalling of SS shaft for bearing seat on driving and non driving i/c cost of machining, turning etc complete in all respects | 1 | Job | |
| 8 | 1.07 | Providing and fixing of ball bearing 6311 complete in all respect SKF/FAG/TATA | 2 | Nos | |
| 9 | 1.08 | Dynamic balancing of rotating assembly complete in all respect | 1 | Job | |
| 10 | 1.09 | Replacement of packing sheet, gland dori, grease and nut bolt etc | 1 | Job | |
| 11 | 1.1 | Carriage of pump from site to work shop and back to site | 1 | Job | |
| 12 | 1.11 | Fixing of pump after alignment of pump and motor complete in all respects | 1 | Job | |
| 13 | 2 | Providing and fixing of carbon brush holder i/c cost of nut bolts etc complete in all respects in various slipring motor as per sample at water works sec 26, Chd | 8 | Nos | |
| 14 | 3 | Providing and fixing of carbon brush in various slipring motor as per sample at water works sec 26, Chd | 24 | Nos | |
| 15 | 4 | Repair of junction box by providing and fixing of Bakelite board and copper glass lead 120mm2- 6 Nos 1.5 mtr each copper nut bolts as per existing size with proper thimbling and taping complete job for 375 HP slipring motor installed at bed No 2 & 3 Jyoti side at water works sec 26, Chd | 2 | Nos | |
| 16 | 5 | Providing and fixing of coupling pin type i/c cost of rubber bush etc for centrifugal pump coupled with 240 HP slipring motor installed at bed No 4 Jyoti side at water works sec 26, Chd | 1 | Job | |
| 17 | 6 | Repair of regulator 215 HP motor with replacement of insulator complete with copper studs, half round contact, small copper strip, nut bolt, washer, tapping up on T-oil etc complete in all respect installed at bed No 2 at w/w sec 26, Chandigarh. | 1 | Job | |
| 18 | 7 | Repair and rewinding of 5 HP monoblock pump set i/c cost of rewinding kit, bush, rotor machining, opening and refitting complete in all respect at water works sec 26, Chd | 2 | Job | |
| 19 | 8 | Repairing of DV 50 vacuum pump with rewinding of motor i/c cost of copper wire, F class insulation paper, epoxy wedge, Dr beck varnish, Red becktrol, connection glass lead and repair of bearing 6308-2 No, Replacement of pump bush, neck ring, brazing of impellor fins, replacement of bearing 6307-2 No , packing sheet, gland dori, nut bolt etc complete at water works sec 26 , Chandigarh. | 2 | Job | |
| 20 | 9 | providing and fixing of DOL starter of make L&T with relay range 15-25 amp suitable for various vacuum pumps and dewatering pumping set i/c cost of wiring etc complete in all respect at water works sec 26, Chd | 2 | Job | |
| 21 | 10 | Providing and fixing of main switch 63 amp suitable for various vacuum pumps and dewatering pumping set i/c cost of wiring etc complete in all respect at water works sec 26, Chd | 2 | Job | |
| 22 | 11 | Less against old material | 1 | Job |
AI Tender Summary
Tender Timeline
Mar 16, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 22, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 23, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender