Construction Of Gau Sanrakshan Kendra At Village Kadiyoli Block Nawabganj Distt Farrukhabad .
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Mar 2021
0 days left
EMD
1.82 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
FARRUKHABAD → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Gau Sanrakshan Kendra At Village Kadiyoli Block Nawabganj Distt Farrukhabad .
BOQ
| Name of Work: Construction Of Gau Sanrakshan Kendra At Village Kadiyoli Block Nawabganj Distt Farrukhabad. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CATTEL SHED | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Excavation of foundation in ordinary soil (loam, clay or sand) including lift upto\n1.50 meter and lead upto 50 meter and including filling, watering and ramming of excavated earth into the trenches or into that space between the building and sides of foundation trenches oe into the plinth and removal and disposal of sur- plus earth as directed by the engineer incharge up to a distance of 30 meter\nfrom the foundation trencehs. | BI01010001010000000000000515BI0100001113 | 161.52 | CUM |
| 3 | 1.02 | Filling of available excavated earth in trenches, plinth, sides of foundation etc in layers not exceeding 20 cms in depth.\nConsolidation each deposited layer by ramming and watering including lead\nupto 50 m and lift upto 1.5 m. | BI01010001010000000000000515BI0100001114 | 48.44 | CUM |
| 4 | 1.03 | filling of carted earth | BI01010001010000000000000515BI0100001115 | 46.32 | CUM |
| 5 | 1.04 | Providing and laying in cement concrete 1:4:8 (1 cement, 4 coarse sand, 8 graded stone aggregate 40 mm niminal size) of not less than strenght of M150 and curing complete, including cost of form-work, in\nfoundation and floors. | BI01010001010000000000000515BI0100001116 | 90.4 | CUM |
| 6 | 1.05 | Sand filling in plinth under floors including wayering, ramming, consolidating and dressingcomplete including lead upto50m and lift upto 1.5mt. excluding cost of sand | BI01010001010000000000000515BI0100001117 | 109 | CUM |
| 7 | 1.06 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 1.5: 3 in Coulmn of door and windows excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001118 | 39 | CUM |
| 8 | 1.07 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 2: 4 in linters of door and windows excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001119 | 0.56 | CUM |
| 9 | 1.08 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 2: 4 in lighter beam i.e having span upto 6 mt., excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001120 | 46.68 | CUM |
| 10 | 1.09 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 2: 4 in raft foundation & footing i.e having span upto 6 mt., excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001121 | 34.44 | CUM |
| 11 | 1.1 | Mild steel or iron in plain work such as rainforced concrete or reinforcement brick work (when not include in an over all rates) wrought to required shape as necessary including benefits for proper completeion of work and including supply of all steel and wastage and overlapping\nand hooks. | BI01010001010000000000000515BI0100001122 | 132.84 | QTL. |
| 12 | 1.11 | Class M-150 brick work in 1:6 cement COURSE SAND sand(of 2.25 Courseness modules) mortar in foundation and plinth including supply of all materials, labour, tools, and plants etc. required for proper\ncompletion of the work | BI01010001010000000000000515BI0100001123 | 4.08 | CUM |
| 13 | 1.12 | Painting on DPC with two coats of air blawn bitumen 85/50 or 85/25 @ 1.7 kg/sqm approx including cost of fuel if\nany. | BI01010001010000000000000515BI0100001124 | 11.04 | sqm |
| 14 | 1.13 | Brick work in super structure above plinth level up to floor two level (up to two stories) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall 230mm thick to (1:6\ncement & coarse sand) | BI01010001010000000000000515BI0100001125 | 37.44 | CUM |
| 15 | 1.14 | 15mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth.\n(3) 1 cement : 6 fine sand | BI01010001010000000000000515BI0100001126 | 209.04 | sqm |
| 16 | 1.15 | 12 mm thick rough cast exterior cement plaster on walls consisting of 10 mm thick backing cast of 1:3 cement mortar [1 cement : 3coarse sand] 10 mm thick finishing coat of 1:3 cement mortar [1 cement : 3 coarse aggregate of size 3 mm to 12 mm] including arises, chamfers and\nfor counded angles not. | BI01010001010000000000000515BI0100001127 | 217.12 | sqm |
| 17 | 1.16 | Distempering (first coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to given an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&N, shalimar, Asian paints after throughly brushing the surface free from mortar droppings and other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (for internal wall surface).\nfor every coat after first coat or subsequent coat. | BI01010001010000000000000515BI0100001128 | 209.04 | sqm |
| 18 | 1.17 | Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials labour tools and plant etc required for proper completion of the work (two coat) | BI01010001010000000000000515BI0100001129 | 217.12 | sqm |
| 19 | 1.18 | Painting of two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small article not exceeding 0.10 sqm in area with superior synthetic enamel such as LUXOL3, hi gloss apcolitesuperlac, Dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials labour tools and plant etc\nrequired completion of the work. | BI01010001010000000000000515BI0100001130 | 233.2 | sqm |
| 20 | 1.19 | 25 mm thick 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate of size20 mm nominal size) laid in one layer finished with floting cost of neat cement as desired by engineer in charge. | BI01010001010000000000000515BI0100001131 | 35.04 | sqm |
| 21 | 1.2 | First class brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming and including supply of all material, labour and T & P etc requred for proper completion of the work | BI01010001010000000000000515BI0100001132 | 940.2 | sqm |
| 22 | 1.21 | Steel work in built up tubular (round , square and rectangular hollow tubes stc) trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete.\nhot finished welded type tubes. | BI01010001010000000000000515BI0100001133 | 14973.3 | Kg |
| 23 | 1.22 | supply and fixing 6 mm thick grey corrugated asbestars sheet in position including supply of materials labour and tools and plants etc required for proper completion of thevwork . | BI01010001010000000000000515BI0100001134 | 1561.72 | sqm |
| 24 | 1.23 | supply and fixing ridges vally and gutters of asbastas sheet fixed with J or U bolt 10mm dia with bitumen washers complete including supply of all materials, labour and tools and plant etc required for proper completion of work including wastage (labour only) | BI01010001010000000000000515BI0100001135 | 393.6 | Rm |
| 25 | 1.24 | providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 type A including jointing with seal ring confirming to IS : 5382 leaving 10 mm gap for thermal expension. (i) single socketed pipes a) 110 mm diameter. | BI01010001010000000000000515BI0100001136 | 146 | Rm |
| 26 | 1.25 | Construction of mangers | BI01010001010000000000000515BI0100001137 | 126.16 | Rm |
| 27 | 2 | CATTEL SHED ELECTRICAL & PLUMBING WORK | BI01010001010000000000000515BI0100001138 | ||
| 28 | 2.01 | Wrining point for light with 1.5 sqmm FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreating, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. | BI01010001010000000000000515BI0100001139 | 220 | Each |
| 29 | 2.02 | S/F of recess/surface/pendent mounting round 10 to 15 watt LED down lighter having power coated die cast aluminium coated housing with heat sink difuser/reflector and driver set complete in all respect. CAT-A | BI01010001010000000000000515BI0100001140 | 64 | Each |
| 30 | 2.03 | Supply and burying of 40 mm dia x 4.5 meter long G.I. pipe, vertically for earthing having 12 mm dia holes spaced 75mm apart drilled upto 2 meter from the bottom complete with earthing lead of No. 6 to 8SWG G.I. Wire in G.I. pipe upto appron ( and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board 30cm square C.I. box with hinged cover, masonary housing alterrnet layers/of charcoal/coke and salt at least 150 mm thick alround etc complete in all respects. | BI01010001010000000000000515BI0100001141 | 4 | Each |
| 31 | 2.04 | Supplying and laying of 25 mm x 3 mm G.I. strip for earthing\npurposed as required complete in all respects. | BI01010001010000000000000515BI0100001142 | 80 | Mt |
| 32 | 2.05 | Supply & fixing of two number 8 SWG G.I. wire for earthing purposed as required complete in all respects. | BI01010001010000000000000515BI0100001143 | 120 | Mt |
| 33 | 2.06 | Supply and fixing of 6Amp to 32 Amp MCB (10 KA) c curve 5-32\nAmps. Cat-A | BI01010001010000000000000515BI0100001144 | 40 | Each |
| 34 | 2.07 | Supply and fixing of 40/63 Amp MCB (10 KA) c curve 40 Amps. 4\npole MCB Cat-A | BI01010001010000000000000515BI0100001145 | 4 | Each |
| 35 | 2.08 | Construction of recess distribution board of all size including cutting of brick work providing lintel to suitable size & thickness plastering etc. with supply of all materials, labour, T&P etc. required for proper completion of work. 600 x 480 x 200 mm size | BI01010001010000000000000515BI0100001146 | 4 | Each |
| 36 | 2.09 | Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats synthetic enamel paint complete with necessary conduit entry and DP/TPN, fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper complete of work.\n600 x 480 x 200 mm size | BI01010001010000000000000515BI0100001147 | 4 | Each |
| 37 | 2.1 | Supply and fixing of flush/surface mounting distribution boards with additional metel door without MCB complete in all respects. 6 Way TPN Cat A. | BI01010001010000000000000515BI0100001148 | 4 | Each |
| 38 | 2.11 | Supply and fixing of crimping, solder, less copper ton electroplated lugs of Dowel/ismail make suitable for 1.5 Sqmm to 6 Sqmm cables, including tapping with insulating tape, etc complete in all respects. | BI01010001010000000000000515BI0100001149 | 100 | Each |
| 39 | 2.12 | Supply and fixing of single pole MCB blanking Plate. Cat B | BI01010001010000000000000515BI0100001150 | 40 | Each |
| 40 | 2.13 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and tops on surface, the cable run shall br fixed on M.S. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respects the armouring of the cable shall be properly connected with the earth conductor by clamps etc.10 sqmm 4 core | BI01010001010000000000000515BI0100001151 | 80 | Mt |
| 41 | 2.14 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire.10 Sqmm core. | BI01010001010000000000000515BI0100001152 | 8 | Each |
| 42 | 2.15 | Supply and fixing of palm/pin type copper tin platted cables sockets ( lugs) to the cable leads, insulating with tape and making of connections etc. complete in all respects as per direction of engineer- incharge.10 Sqmm. | BI01010001010000000000000515BI0100001153 | 32 | Each |
| 43 | 2.16 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 15 mm dia nominal bore | BI01010001010000000000000515BI0100001154 | 24 | Rm |
| 44 | 2.17 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia nominal bore | BI01010001010000000000000515BI0100001155 | 12 | Rm |
| 45 | 3 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved\nquality for new work : | BI01010001010000000000000515BI0100001156 | ||
| 46 | 3.01 | 15 mm diameter pipe | BI01010001010000000000000515BI0100001157 | 12 | Rm |
| 47 | 3.02 | 20 mm diameter pipe | BI01010001010000000000000515BI0100001158 | 20 | Rm |
| 48 | 3.03 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n25 mm nominal bore | BI01010001010000000000000515BI0100001159 | 8 | Each |
| 49 | 3.04 | Providing and fixing brass stop cock of approved quality :\n15 mm nominal bore | BI01010001010000000000000515BI0100001160 | 24 | Each |
| 50 | 4 | HAY GODOWN | BI01010001010000000000000515BI0100001161 | ||
| 51 | 4.01 | Excavation of foundation in ordinary soil (loam, clay or sand) including lift upto 1.50 meter and lead upto 50 meter and including filling, watering and ramming of excavated earth into the trenches or into that space between the building and sides of foundation trenches oe into the plinth and removal and disposal of sur-plus earth as directed by the engineer incharge up to a distance of 30 meter from the foundation trencehs. | BI01010001010000000000000515BI0100001162 | 48.27 | Cum |
| 52 | 4.02 | Sand filling in plinth under floors including wayering, ramming, consolidating and dressingcomplete including lead upto50m and lift upto 1.5 mt. | BI01010001010000000000000515BI0100001163 | 15.63 | Cum |
| 53 | 4.03 | Filling of carted earth | BI01010001010000000000000515BI0100001164 | 5.29 | Cum |
| 54 | 4.04 | Available earth filling | BI01010001010000000000000515BI0100001165 | 14.48 | Cum |
| 55 | 4.05 | Providing and laying in cement concrete 1:4:8 (1 cement, 4 coarse sand, 8 graded stone aggregate 40 mm niminal size) of not less than strenght of M150 and curing complete, including cost of form-work, in foundation and floors. | BI01010001010000000000000515BI0100001166 | 16.75 | Cum |
| 56 | 4.06 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 2: 4 in linters of door and windows excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001167 | 3.29 | Cum |
| 57 | 4.07 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 2: 4 in slab excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001168 | 1.72 | Cum |
| 58 | 4.08 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 2: 4 in lighter beam\ni.e having span upto 6 mt., excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001169 | 4.23 | Cum |
| 59 | 4.09 | Class M-150 brick work in 1:6 cement corse sand(of 1.25 fineness modules) mortar in foundation and plinth including supply of all materials, labour, tools, and plants etc. required\nfor proper completion of the work | BI01010001010000000000000515BI0100001170 | 23.82 | Cum |
| 60 | 4.1 | Brick work in super structure above plinth level up to floor two level (up to two stories) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall (1:6 cement & coarse sand)\nbut for wall of one brick add extra labour. | BI01010001010000000000000515BI0100001171 | 41.36 | Cum |
| 61 | 4.11 | Painting on DPC with two coats of air blawn bitumen 85/50 or 85/25 @ 1.7 kg/sqm approx including cost of fuel if any. | BI01010001010000000000000515BI0100001172 | 9.37 | Sqm |
| 62 | 4.12 | Providing and injecting chemical emulsion for precostructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement esxavation top surface if plinth filling junction of wall and floor, along the external of binding expansion joints, surrounding of pipes and condutes etc complete.\nPlinth area of the building at ground floor only shall be measured as per I.S.6313 (part II 1981) Alderine emulsifiable concentrate or any other approved matterial such as Heptrachlor or Chlordane will be used. The rate of application chemical emulsion shall be as follows:\n1. Treatment for masanoary & foundation 5 liter per sqm.\n2.Back fill in immediate contact with foundation 7.5 lit/sqm.\n3. Treatment of top surface of plinth filling lit/sqm.\n4. Treatment junction of wall and floor 7.5 lit/sqm.\n5. Treatment of soil along external perimeter of building 7.5 lit/sqm.\n6. Treatment of soil under apron along external perimeter 5 lit/sqm. (As per manufacturer's standard dilution) | BI01010001010000000000000515BI0100001173 | 93.27 | Sqm |
| 63 | 4.13 | MS or iron work of small size and section such as holding down bolts holdfast tieods grading etc wrought to required from including supply to steel bolt nuts wastage etc and their fixing required for proper completion of work.\nZ se4ction window excluding glass panes. | BI01010001010000000000000515BI0100001174 | 46.11 | Kg |
| 64 | 4.14 | mild steel or iron in plain work such as rainforced concrete or reinforcement brick work (when not include in an over all rates) wrought to required shape as necessary including benefits for proper completeion of work and including supply of all steel and wastage and overlapping and hooks. | BI01010001010000000000000515BI0100001175 | 8.64 | Qtl |
| 65 | 4.15 | Supply and fixing rolling shutters of approved make mode of 80 x 125 mm (3\" x 1/8 gauge) cold rolled M.S. lath inter locked through out their entire length and joined together at the end by and locks and mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and puff operation complete. | BI01010001010000000000000515BI0100001176 | 15.03 | sqm |
| 66 | 4.16 | Providing and fixing 27 CM long wire spring for rolling shutters | BI01010001010000000000000515BI0100001177 | 4 | Each |
| 67 | 4.17 | Providing and fixing ball bearing for rolling shutter | BI01010001010000000000000515BI0100001178 | 4 | Each |
| 68 | 4.18 | Providing and fixing top cover for rolling shutter | BI01010001010000000000000515BI0100001179 | 9 | Rm |
| 69 | 4.19 | supply and fixing 6 mm thick grey corrugated asbestars sheet in position including supply of materials labour and tools and plants etc required for proper completion of thevwork . | BI01010001010000000000000515BI0100001180 | 120.58 | sqm |
| 70 | 4.2 | supply and fixing ridges vally and gutters of asbastas sheet fixed with J or U bolt 10mm dia with bitumen washers complete including supply of all materials, labour and tools and plant etc required for proper completion of work including\nwastage (labour only) | BI01010001010000000000000515BI0100001181 | 38.07 | Rm |
| 71 | 4.21 | 15 mm thick rough cast interior cement plaster on walls consisting of 10 mm thick backing cast of 1:6 cement mortar [1 cement :6 coarse sand] 10 mm thick finishing coat of 1:6 cement mortar [1 cement : 6 coarse aggregate of size 3 mm to 12 mm] including arises, chamfers and for counded angles not. | BI01010001010000000000000515BI0100001182 | 236.59 | sqm |
| 72 | 4.22 | 12mm cement plaster in single coat on rough side of single or half brick wall for exterior plastering upto floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth.\n(3) 1 cement : 6 coarse sand | BI01010001010000000000000515BI0100001183 | 206.02 | sqm |
| 73 | 4.23 | 2 cm thick cement plaster in dedo or skirting in 1:2 consiting of 1 part of cement and 2 part of approved coare send laid in panels finish 3 mm floating coaty of neat cement or cement mixed with marble dust in ratio 1:5 including supply of all matrials labour T&P etc complete. | BI01010001010000000000000515BI0100001184 | 9.64 | sqm |
| 74 | 4.24 | 40 mm thick 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate of size20 mm nominal size) laid in one layer finished with floting cost of neat cement (40 mm thick floor) as desired\nby engineer in charge. | BI01010001010000000000000515BI0100001185 | 101.72 | sqm |
| 75 | 4.25 | 25 mm thick 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate of size20 mm nominal size) laid in one layer finished with floting cost of neat cement (25 mm thick floor) as desired\nby engineer in charge. | BI01010001010000000000000515BI0100001186 | 27.29 | sqm |
| 76 | 4.26 | Distempering (two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to given an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&N, shalimar, Asian paints after throughly brushing the surface free from mortar droppings and other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (for internal wall surface). | BI01010001010000000000000515BI0100001187 | 241.65 | sqm |
| 77 | 4.27 | Finishing of walls with waterproof cement paint of approved make and quality on new work with 2 coats of give an even sade over & including a priming coat with cement primer including supply of all materials labour T&P etc. complete. | BI01010001010000000000000515BI0100001188 | 206.02 | sqm |
| 78 | 4.28 | Painting of two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small article not exceeding 0.10 sqm in area with superior synthetic enamel such as LUXOL3, hi gloss apcolitesuperlac, Dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials labour tools and plant etc required completion of the work. same as wood work | BI01010001010000000000000515BI0100001189 | 33.03 | sqm |
| 79 | 4.29 | Steel work in built up tubular (round , square and rectangular hollow tubes stc) trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete. hot finished welded type tubes. | BI01010001010000000000000515BI0100001190 | 1079.01 | Kg |
| 80 | 4.3 | providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 type A including jointing with seal ring confirming to IS : 5382 leaving 10 mm gap for thermal expension. (i) single socketed pipes a) 110 mm diameter. | BI01010001010000000000000515BI0100001191 | 10 | Rm |
| 81 | 4.31 | making drain along with apron | BI01010001010000000000000515BI0100001192 | 45.48 | Rm |
| 82 | 4.32 | Glass strip providing and fixing | BI01010001010000000000000515BI0100001193 | 356.02 | Rm |
| 83 | 5 | HAY GODOWN (ELECTRICAL WORK) | BI01010001010000000000000515BI0100001194 | ||
| 84 | 5.01 | Wrining point for light with 1 sqmm FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreating, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. | BI01010001010000000000000515BI0100001195 | 3 | Each |
| 85 | 5.02 | S/F of LED tube light with batten suitable for up to 1x22 watt LED tube light fitting including tube on surface complete in all respect. CAT-AAA (a) 1x22 watt | BI01010001010000000000000515BI0100001196 | 3 | Each |
| 86 | 5.03 | Supply and burying of 40 mm dia x 4.5 meter long G.I. pipe, vertically for earthing having 12 mm dia holes spaced 75mm apart drilled upto 2 meter from the bottom complete with earthing lead of No. 6 to 8SWG G.I. Wire in G.I. pipe upto appron ( and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board 30cm square C.I. box with hinged cover, masonary housing alterrnet layers/of charcoal/coke and salt at least 150 mm thick alround etc complete in all respects. | BI01010001010000000000000515BI0100001197 | 1 | Each |
| 87 | 5.04 | Supplying and laying of 25 mm x 3 mm G.I. strip for earthing\npurposed as required complete in all respects. | BI01010001010000000000000515BI0100001198 | 10 | Mt |
| 88 | 5.05 | Supply & fixing of two number 8 SWG G.I. wire for earthing purposed as required complete in all respects. | BI01010001010000000000000515BI0100001199 | 15 | Mt |
| 89 | 5.06 | Supply and fixing of 6Amp to 32 Amp MCB (10 KA) c curve 5-32 Amps. Cat-A | BI01010001010000000000000515BI0100001200 | 2 | Each |
| 90 | 5.07 | Supply and fixing of 25 Amp MCB (10 KA) c curve Cat-A | BI01010001010000000000000515BI0100001201 | 1 | Each |
| 91 | 5.08 | Construction of recess distribution board of all size including cutting of brick work providing lintel to suitable size & thickness plastering etc. with supply of all materials, labour, T&P etc. required for proper completion of work. 480 x 480 x 200 mm size | BI01010001010000000000000515BI0100001202 | 1 | Each |
| 92 | 5.09 | Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats synthetic enamel paint complete with necessary conduit entry and DP/TPN, fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper complete of work.\n480x 480 x 200 mm size | BI01010001010000000000000515BI0100001203 | 1 | Each |
| 93 | 5.1 | Supply and fixing of flush/surface mounting distribution boards with additional metel door without MCB complete in all respects. 8Way SPN Cat A. | BI01010001010000000000000515BI0100001204 | 1 | Each |
| 94 | 5.11 | Supply and fixing of crimping, solder, less copper ton electroplated lugs of Dowel/ismail make suitable for 1.5 Sqmm to 6 Sqmm cables, including tapping with insulating tape, etc complete in all respects. | BI01010001010000000000000515BI0100001205 | 20 | Each |
| 95 | 5.12 | Supply and fixing of single pole MCB blanking Plate. Cat B | BI01010001010000000000000515BI0100001206 | 4 | Each |
| 96 | 5.13 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and tops on surface, the cable run shall br fixed on M.S. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respects the armouring of the cable shall be properly connected with the earth conductor by clamps etc.10 sqmm 4 core | BI01010001010000000000000515BI0100001207 | 8 | Mt |
| 97 | 5.14 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire. 10 Sqmm 2 core. | BI01010001010000000000000515BI0100001208 | 2 | Each |
| 98 | 5.15 | Supply and fixing of palm/pin type copper tin platted cables sockets ( lugs) to the cable leads, insulating with tape and making of connections etc. complete in all respects as per direction of engineer-incharge.\n10 Sqmm. | BI01010001010000000000000515BI0100001209 | 6 | Each |
| 99 | 6 | OFFICE | BI01010001010000000000000515BI0100001210 | ||
| 100 | 6.01 | Excavation of foundation in ordinary soil (loam, clay or sand) including lift upto 1.50 meter and lead upto 50 meter and including filling, watering and ramming of excavated earth into the trenches or into that space between the building and sides of foundation trenches oe into the plinth and removal and disposal of sur-plus earth as directed by the engineer incharge up to a distance of 30 meter from the foundation trencehs. | BI01010001010000000000000515BI0100001211 | 21.33 | cum |
| 101 | 6.02 | Sand filling in plinth under floors including wayering, ramming, consolidating and dressingcomplete including lead upto50m and lift upto 1.5 mt. | BI01010001010000000000000515BI0100001212 | 3.79 | cum |
| 102 | 6.03 | filling of carted earth | BI01010001010000000000000515BI0100001213 | 4.08 | cum |
| 103 | 6.04 | Providing and laying in cement concrete 1:4:8 (1 cement, 4 coarse sand, 8 graded stone aggregate 40 mm niminal size) of not less than strenght of M150 and curing complete, including cost of form-work, in foundation and floors. | BI01010001010000000000000515BI0100001214 | 6.12 | cum |
| 104 | 6.05 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 2: 4 in linters of door and windows excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001215 | 0.18 | cum |
| 105 | 6.06 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 2: 4 in slab excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001216 | 4.17 | cum |
| 106 | 6.07 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 1.5: 3 in lighter beam\ni.e having span upto 6 mt., excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001217 | 2.72 | cum |
| 107 | 6.08 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 1.5: 3 in R.C.C. raft foundation and footing with 4cm gauge approved stone blast excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools\n& plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001218 | 3.26 | cum |
| 108 | 6.09 | R.C.C. works with cement approved coarse sand and 2 cm (3/4\") gauge stone blast in proportion 1: 1.5: 3 in R.C.C COLUMN excluding supply reainforcement and its bending the same with 24 B WG winding wire and necessary centring & shuttring etc and also including supply of all materials and labour and tools & plant etc required for proper completion of work strength of the co ncrete shall not be less than M150 | BI01010001010000000000000515BI0100001219 | 3.19 | cum |
| 109 | 6.1 | Class M-150 brick work in 1:6 cement corse sand mortar in foundation and plinth including supply of all materials, labour, tools, and plants etc. required for proper completion of the work | BI01010001010000000000000515BI0100001220 | 6.78 | cum |
| 110 | 6.11 | Brick work in super structure above plinth level up to floor two level (up to two stories) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall (1:6 cement & coarse sand)\nbut for wall of one brick add extra labour. | BI01010001010000000000000515BI0100001221 | 13.62 | cum |
| 111 | 6.12 | Class M-150 brick work in 1:6 cement corse sand mortar in foundation and plinth including supply of all materials, labour, tools, and plants etc. required for proper completion of the work | BI01010001010000000000000515BI0100001222 | 1.17 | cum |
| 112 | 6.13 | Painting on DPC with two coats of air blawn bitumen 85/50 or 85/25 @ 1.7 kg/sqm approx including cost of fuel if any. | BI01010001010000000000000515BI0100001223 | 4.32 | sqm |
| 113 | 6.14 | Providing and injecting chemical emulsion for precostructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement esxavation top surface if plinth filling junction of wall and floor, along the external of binding expansion joints, surrounding of pipes and condutes etc complete.\nPlinth area of the building at ground floor only shall be measured as per I.S.6313 (part II 1981) Alderine emulsifiable concentrate or any other approved matterial such as Heptrachlor or Chlordane will be used. The rate of application chemical emulsion shall be as follows:\n1. Treatment for masanoary & foundation 5 liter per sqm.\n2.Back fill in immediate contact with foundation 7.5 lit/sqm.\n3. Treatment of top surface of plinth filling lit/sqm.\n4. Treatment junction of wall and floor 7.5 lit/sqm.\n5. Treatment of soil along external perimeter of building 7.5 lit/sqm.\n6. Treatment of soil under apron along external perimeter 5 lit/sqm. (As per manufacturer's standard dilution) | BI01010001010000000000000515BI0100001224 | 24.75 | sqm |
| 114 | 6.15 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:\nLaying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.\nWith average thickness of 120 mm and minimum thickness at khurra as 65 mm. | BI01010001010000000000000515BI0100001225 | 28.9 | sqm |
| 115 | 6.16 | 15 mm thick rough cast interior cement plaster on walls consisting of 10 mm thick backing cast of 1:3 cement mortar [1 cement : 3coarse sand] 10 mm thick finishing coat of 1:3 cement mortar [1 cement : 3 coarse aggregate of size 3 mm to 12 mm] including arises, chamfers and for counded angles not. | BI01010001010000000000000515BI0100001226 | 108.54 | sqm |
| 116 | 6.17 | 12mm cement plaster in single coat on rough side of single or half brick wall for exterior plastering upto floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth.\n(3) 1 cement : 6 Coarse sand | BI01010001010000000000000515BI0100001227 | 101.09 | sqm |
| 117 | 6.18 | 20 mm thick cement plaster in dado of skirting in 1:2 consisting of one part of cement & 2 part of approved coarse sandlaid in panels finished with 3 mm floating coaty of neat cement . | BI01010001010000000000000515BI0100001228 | 5.25 | sqm |
| 118 | 6.19 | 25 mm cement concrete flooring 1: 2 : 4 (1 cement : 2 coarse sand :4 stone aggregates of size 12.5 mm and below) by laid over base concrete finished with floating cost of neat cement (base concrete to be paid separately) including fixing of glass strips (excluding cost of glass strip) as desired by engineer in\ncharge. | BI01010001010000000000000515BI0100001229 | 15.24 | sqm |
| 119 | 6.2 | Providing and fixing 1st quality ceremic glazed wall tiles confirming to IS : 15622 ( thickness to be specified by the manufacture) of approved make in all colours as approved by engineer in charge, in skirting rises of steps and dado over 12 mm thick with 1:3 cement mortar (1 cement :3 coarse sand). | BI01010001010000000000000515BI0100001230 | 12.83 | sqm |
| 120 | 6.21 | 40 mm cement concrete flooring 1: 2 : 4 (1 cement : 2 coarse sand :4 stone aggregates of size 12.5 mm and below) by laid over base concrete finished with floating cost of neat cement (base concrete to be paid separately) including fixing of glass strips (excluding cost of glass strip) as desired by engineer incharge. | BI01010001010000000000000515BI0100001231 | 25.78 | sqm |
| 121 | 6.22 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to given an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&N, shalimar, Asian paints after throughly brushing the surface free from mortar droppings and other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (for internal wall surface). | BI01010001010000000000000515BI0100001232 | 127.75 | sqm |
| 122 | 6.23 | Finishing of walls with water proof cement paint of approved make and quality on new work with two coats of give an even shade including a priminng coat with cement primer of approved brand & manufecture supply of all material lablur tools and plants etc required for proper completion of work. | BI01010001010000000000000515BI0100001233 | 101.09 | sqm |
| 123 | 6.24 | Painting of two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small article not exceeding\n0.10 sqm in area with superior synthetic enamel such as LUXOL3, hi gloss apcolitesuperlac, Dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials labour tools and plant etc required completion of the work.\nsame as wood work | BI01010001010000000000000515BI0100001234 | 13.1 | sqm |
| 124 | 6.25 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast tierods, gratings etc (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Door window staircase grill | BI01010001010000000000000515BI0100001235 | 55.59 | Kg |
| 125 | 6.26 | Z-section window (openable) | BI01010001010000000000000515BI0100001236 | 71.94 | Kg |
| 126 | 6.27 | angle iron door frame 40X40x5 | BI01010001010000000000000515BI0100001237 | 40.35 | Kg |
| 127 | 6.28 | mild steel or iron in plain work such as rainforced concrete or reinforcement brick work (when not include in an over all rates) wrought to required shape as necessary including benefits for proper completeion of work and including supply of all steel and wastage and overlapping and hooks. | BI01010001010000000000000515BI0100001238 | 12.9 | Kg |
| 128 | 6.29 | Supply and fixing of flush doors commercial quality confarming to IS 2202 part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with ncessary screws complete. 35 mm thick | BI01010001010000000000000515BI0100001239 | 3.78 | sqm |
| 129 | 6.3 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory window, all complete of work. | BI01010001010000000000000515BI0100001240 | 3.27 | sqm |
| 130 | 6.31 | making drain along with apron | BI01010001010000000000000515BI0100001241 | 25.04 | Rm |
| 131 | 6.32 | Glass strip providing and fixing | BI01010001010000000000000515BI0100001242 | 65.52 | Rm |
| 132 | 7 | OFFICE (ELECTRICAL WORK) | BI01010001010000000000000515BI0100001243 | ||
| 133 | 7.01 | Wrining point for light with 1 sqmm FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreating, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. | BI01010001010000000000000515BI0100001244 | 5 | Each |
| 134 | 7.02 | Wrining point for FAN with 1 sqmm FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreating, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. | BI01010001010000000000000515BI0100001245 | 1 | Each |
| 135 | 7.03 | Wrining point for PLUG with 1 sqmm FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreating, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. | BI01010001010000000000000515BI0100001246 | 2 | Each |
| 136 | 7.04 | Supply and burying of 40 mm dia x 4.5 meter long G.I. pipe, vertically for earthing having 12 mm dia holes spaced 75mm apart drilled upto 2 meter from the bottom complete with earthing lead of No. 6 to 8SWG G.I. Wire in G.I. pipe upto appron ( and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board 30cm square C.I. box with hinged cover, masonary housing alterrnet layers/of charcoal/coke and salt at least 150 mm thick alround etc complete in all respects. | BI01010001010000000000000515BI0100001247 | 1 | Each |
| 137 | 7.05 | Supplying and laying of 25 mm x 3 mm G.I. strip for earthing purposed as required complete in all respects. | BI01010001010000000000000515BI0100001248 | 10 | Mt |
| 138 | 7.06 | Supply & fixing of two number 8 SWG G.I. wire for earthing purposed as required complete in all respects. | BI01010001010000000000000515BI0100001249 | 20 | Mt |
| 139 | 7.07 | Supply and fixing of 6Amp to 32 Amp MCB (10 KA) c curve 5-32\nAmps. Cat-A | BI01010001010000000000000515BI0100001250 | 5 | Each |
| 140 | 7.08 | Supply and fixing of 6 Amp to 32 Amp DP MCB (10 KA) c curve\n32 Amps DP MCB (10 KA) C Curve-CAT A. | BI01010001010000000000000515BI0100001251 | 1 | Each |
| 141 | 7.09 | Construction of recess distribution board of all size including cutting of brick work providing lintel to suitable size & thickness plastering etc. with supply of all materials, labour, T&P etc. required for proper completion of work. 480 x 480 x 200 mm size | BI01010001010000000000000515BI0100001252 | 1 | Each |
| 142 | 7.1 | Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats synthetic enamel paint complete with necessary conduit entry and DP/TPN, fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper complete of work.\n480 x 480 x 200 mm size | BI01010001010000000000000515BI0100001253 | 1 | Each |
| 143 | 7.11 | Supply and fixing of flush/surface mounting distribution boards with additional metel door without MCB complete in all respects. 12Way SPN Cat A. | BI01010001010000000000000515BI0100001254 | 1 | Each |
| 144 | 7.12 | Supply and fixing of crimping, solder, less copper ton electroplated lugs of Dowel/ismail make suitable for 1.5 Sqmm to 6 Sqmm cables, including tapping with insulating tape, etc complete in all respects. | BI01010001010000000000000515BI0100001255 | 20 | Each |
| 145 | 7.13 | Supply and fixing of single pole MCB blanking Plate. Cat B | BI01010001010000000000000515BI0100001256 | 5 | Each |
| 146 | 7.14 | Addition for light/fan points with modular type switch in place of\npiono type switch | BI01010001010000000000000515BI0100001257 | 6 | Each |
| 147 | 7.15 | Addition for HPSV/Exhaust fan points with modular type switch in\nplace of piono type switch | BI01010001010000000000000515BI0100001258 | 1 | Each |
| 148 | 7.16 | Addition for plug points with modular type switch in place of piono\ntype switch | BI01010001010000000000000515BI0100001259 | 2 | Each |
| 149 | 7.17 | Supply and fixing concealing of 20 mm dia 2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS 3419 for drawing wires duly sealed at joint with original resin/ adhesive to make the complete piping rigid, including cost of materials labour & T&P etc required for proper completeion of\nwork. | BI01010001010000000000000515BI0100001260 | 15 | Mt |
| 150 | 7.18 | Supply and wiring of submains with two number 2.5 sqm FRLSH PVC insulated 1100V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PCV conduit with 1 number 1.5 Swm FRLSH PVC insulated , complete in all respect. | BI01010001010000000000000515BI0100001261 | 15 | Mt |
| 151 | 7.19 | Supply and fixingof single wall bracket on matching MDFEG board\nbase etc complete in all required | BI01010001010000000000000515BI0100001262 | 1 | Each |
| 152 | 7.2 | S/F of LED tube light with batten suitable for up to 1x22 watt LED tube light fitting including tube on surface complete in all respect. CAT-AAA (a) 1x22 watt. | BI01010001010000000000000515BI0100001263 | 1 | Each |
| 153 | 7.21 | Supply and fixing of power plug with 15A/250 V flush type switch and 3 pin 15A/250V flush type socket in suitable M.S. Box of 175x100x50 mm size switch backlite sheet cover 3 mm thick fixwed with brass machine screws and cup washer. | BI01010001010000000000000515BI0100001264 | 1 | Each |
| 154 | 7.22 | Erection and testing of ceiling fan and regulator for room height upto 3.5 mt including supply of 3mm thick G.I. down rod 19 mm dia duly painted complete in all respect. | BI01010001010000000000000515BI0100001265 | 1 | Each |
| 155 | 7.23 | Erection and testing of exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washer etc complete in all respects. | BI01010001010000000000000515BI0100001266 | 1 | Each |
| 156 | 7.24 | supply and fixing of 16 gauge M.S. drum duly painted including making hole in the for exhaust fan and finishing properly etc complete as required. | BI01010001010000000000000515BI0100001267 | 1 | Each |
| 157 | 7.25 | S/f of hexagonal fan box with haxagonal side of aprox 80mm in lengeth fabricated from 16 SWGM.S. sheet in corporating 10mm dia M>S. round barduly bent for supporting fan hanger dully painted withed oxide and screwing arrangement with wiring conduit laid in the RCC roof before concreting along with supply of all material labour T&P for proper completeion of work. | BI01010001010000000000000515BI0100001268 | 1 | Each |
| 158 | 7.26 | supply and fixing of electronic fan ragulator modular 120-280 V ISI marked on the existing switch board including making connection, required material, labour T&P etc for proper completion of work to the satisfaction of engineer incharge of work. | BI01010001010000000000000515BI0100001269 | 1 | Each |
| 159 | 7.27 | supply and laying of aluminium conductor PVC insulated armoured served sheeted cable 1000 bolts graded at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on side and top on surface the cable run shall be fixed on MS clamps etc of suitable size or as directed by engineer incharge complete in all respect the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10sqmm core | BI01010001010000000000000515BI0100001270 | 1 | Mt |
| 160 | 7.28 | supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed underground cable including rubber ring etc complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction by engineer incharge.\n10 sqmm 2 core | BI01010001010000000000000515BI0100001271 | 2 | Each |
| 161 | 7.29 | supply and fixing of nplam/pin type copper tin plated cables socket to the cable leads, insulating with tape and making of connection etc, complete in all respects as per direction of engineer incharge. 10 sqmm | BI01010001010000000000000515BI0100001272 | 6 | Each |
| 162 | 7.3 | supply and erction of AC 1200 mm sweep 230/250 volts 50 hzs ceiling fan with regulator standar down rod, blades including connection etc complete as required. | BI01010001010000000000000515BI0100001273 | 1 | Each |
| 163 | 7.31 | supply of AC 230/250 volt 50 hzs wxhaust fan including providing nuts bolts mounting frame and other accessories including connections etc complete as required. 300 mm sweep | BI01010001010000000000000515BI0100001274 | 1 | Each |
| 164 | 9 | OFFICE (PLUMBING & SANITARY WORK) | BI01010001010000000000000515BI0100001275 | ||
| 165 | 9.01 | Providing and fixing water closet squatting pan (Indian type w.c. pan) with 100 mm sand cast iron P & S trap, 10 lit. low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handel level) confirming to IS: 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors where required, white vitreous china orissa pattern w.c. pan of size 580 x 440 mm with integral type foot rest. | BI01010001010000000000000515BI0100001276 | 1 | Each |
| 166 | 9.02 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern , including painting of fittings and brackets, cutting and making good the walls where ever required. White vitreous china wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. | BI01010001010000000000000515BI0100001277 | 1 | Each |
| 167 | 9.03 | Providing and fixing P.V.C waste pipe for sink or wash basin including\nP.V.C. waste fittings complete. 32 mm dia | BI01010001010000000000000515BI0100001278 | 1 | Each |
| 168 | 9.04 | Providing and fixing soil, waste and vent pipes\ncentrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989\n100 mm dia | BI01010001010000000000000515BI0100001279 | 5 | Rm |
| 169 | 9.05 | 75 mm dia | BI01010001010000000000000515BI0100001280 | 5 | Rm |
| 170 | 9.06 | Providing lead caulked joints to sand cast iron/centrifugally cast iron pipes & fitings of dia\n100 mm dia | BI01010001010000000000000515BI0100001281 | 2 | Each |
| 171 | 9.07 | 75mm dia | BI01010001010000000000000515BI0100001282 | 6 | Each |
| 172 | 9.08 | providing and fixing MS holder bat clamps of approved desing to sand cast iron/cast iron (supan) pipe, embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1cement : 2 coarse : 4 graded stone aggregate 20mm nominal size), including cost of cutting holes and making good the walls etc.\n100 mm dia pipe. | BI01010001010000000000000515BI0100001283 | 2 | Each |
| 173 | 9.09 | 75 mm dia pipe | BI01010001010000000000000515BI0100001284 | 2 | Each |
| 174 | 9.1 | Providing and fixing trap of self cleaning design with screwed down or hinged grating with or with out vent arm complete including cost of cutting and making good the walls and floors:\nsand cast iron s&s as per IS-3989 100 mm inlet and 75 mm outlet | BI01010001010000000000000515BI0100001285 | 1 | Each |
| 175 | 9.11 | Providing & fixing cast iron coller sand cast iron s&s as per IS 3989 100 mm dia | BI01010001010000000000000515BI0100001286 | 2 | Each |
| 176 | 9.12 | 75 mm dia | BI01010001010000000000000515BI0100001287 | 2 | Each |
| 177 | 9.13 | Providing and fixing plain cast iron S&S sanitary bend\n100 mm dia | BI01010001010000000000000515BI0100001288 | 1 | Each |
| 178 | 9.14 | 75 mm | BI01010001010000000000000515BI0100001289 | 2 | Each |
| 179 | 9.15 | providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick bolts and nuts complete. 100 mm | BI01010001010000000000000515BI0100001290 | 1 | Each |
| 180 | 9.16 | 75 mm | BI01010001010000000000000515BI0100001291 | 1 | Each |
| 181 | 9.17 | providing and fixing centrifugaly cast iron single equal plain junction of required degree.\n100x100x100 mm | BI01010001010000000000000515BI0100001292 | 1 | Each |
| 182 | 9.18 | 75x75x75 mm | BI01010001010000000000000515BI0100001293 | 1 | Each |
| 183 | 9.19 | Providing and fixing on wall face unplasticised rigid PVC rain water pieps conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion single socketed pipe\n110 mm dia | BI01010001010000000000000515BI0100001294 | 4 | Rn |
| 184 | 9.2 | Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate of 20 mm nominal size) over PVC sheet 11mx1mx400 mm micron, finished with 12 mm cemnt plaster 1:3 and a coat of neat cement punning rounding the age and making and finishing the outlet complete.\n110 mm | BI01010001010000000000000515BI0100001295 | 1 | Each |
| 185 | 9.21 | Providing and fixing unplasticised PVC pipe clips of aproved design to unplasticised rain water pieps by means of xx mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 and making good the wall etc complete.\n110 mm | BI01010001010000000000000515BI0100001296 | 2 | Each |
| 186 | 9.22 | providing and fixing to the inlet mouth of rain water pipe cast iron\ngrating 1.5 cm dia and weighting not less 440 grms. | BI01010001010000000000000515BI0100001297 | 1 | Each |
| 187 | 9.23 | providing and fixing GI pipes complete with GI fittings & clamps including cutting & making good the wall etc.(internal work) exposed on wall 25 mm dia niminal bore (medium duty) | BI01010001010000000000000515BI0100001298 | 10 | Rm |
| 188 | 9.24 | concealed pipe including painting with anticorrosive bitumen paint, ciutting chases and making good the wall\n15 mm dia nominal bore | BI01010001010000000000000515BI0100001299 | 10 | Rm |
| 189 | 9.25 | 20 mm dia nominal bore | BI01010001010000000000000515BI0100001300 | 5 | Rm |
| 190 | 9.26 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions 15 mm nominal bore. | BI01010001010000000000000515BI0100001301 | 1 | Each |
| 191 | 9.27 | Providing and fixing CP brass bib cock of approved quality confirming to IS 8931 15 mm nominal bore | BI01010001010000000000000515BI0100001302 | 1 | Each |
| 192 | 9.28 | Providing and fixing CP brass long body bib cock of approved quality confirming to IS standard and weighing not less than 690 gms.\n15 mm nominal bore | BI01010001010000000000000515BI0100001303 | 1 | Each |
| 193 | 9.29 | Providing and fixing CP brass angle valve for basin mixer and gyser points of approved quality confirming to IS 8931.\n15 mm nominal bore | BI01010001010000000000000515BI0100001304 | 1 | Each |
| 194 | 9.3 | providing and fixing gun metal gate valve with wheel of approved quality\n25 mm dia nominal bore | BI01010001010000000000000515BI0100001305 | 1 | Each |
| 195 | 9.31 | 32 mm nominal bore | BI01010001010000000000000515BI0100001306 | 1 | Each |
| 196 | 9.32 | providing and fixing ball valve brasss of approved quality high or low pressure with plastic floats complete\n25 mm nominal bore | BI01010001010000000000000515BI0100001307 | 2 | Each |
| 197 | 10 | OFFICE INTERNAL SEWRAGE SYSTEM | BI01010001010000000000000515BI0100001308 | ||
| 198 | 10.01 | excavating trenches in all kind of soil of required width for pipe, cable etc including excavaion for socket and dressing of sides, ramming of bottoms, depth upto 1.5 mt including getting out the excavated soil and then returing the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming watering etc and disposing of surface excavated soil as directed with in 80m.\npipes cable etc exceeding 80 mm dia but not exceeding 300 mm dia. | BI01010001010000000000000515BI0100001309 | 10 | Rm |
| 199 | 10.02 | providing laying and jointing glazed stone ware pipes grade A with stuff mixture of cement mortar in the proportion of 1:1 (cement : sand) including testing of joints etc. complete.\n100 mm dia | BI01010001010000000000000515BI0100001310 | 10 | Rm |
| 200 | 10.03 | laying cement concrete 1:5:10 in haunching S.W. pipes including concrete for beding necessary from work and curing complete 100 mm dia | BI01010001010000000000000515BI0100001311 | 10 | Rm |
| 201 | 10.04 | fixing S.W. gully trap grade A complete with C I grating brick masanory chamber and water tight C I cover frame of 300 x300 mm size inside square mouth traps or P or S type traps.\n100x150 mm dia | BI01010001010000000000000515BI0100001312 | 2 | Each |
| 202 | 10.05 | construction brick masanory man hole in cement mortar 1:4 RCC top slab with 1:2:4 mix, fondation concrete 1:4:8 mix inside plaster 12 mm thick with cement mortar 1:3 finished with floating coat of neat cement and making channels in cement concrete 1:2:4 finished with a floating coat of neat cement complete as per standard design\nstandard size 900x800 mm and 500 mm deep including C I cover frame | BI01010001010000000000000515BI0100001313 | 1 | Each |
| 203 | 11 | CHARAHIYA (3 No) | BI01010001010000000000000515BI0100001314 | ||
| 204 | 11.01 | Earth in Excavation | BI01010001010000000000000515BI0100001315 | 6 | Cum |
| 205 | 11.02 | P.C.C. in foundation (1:4:8) | BI01010001010000000000000515BI0100001316 | 6 | Cum |
| 206 | 11.03 | R.C.C. floor/footing in (1:1.5:3 | BI01010001010000000000000515BI0100001317 | 6.39 | Cum |
| 207 | 11.04 | R.C.C. wall (1:1.5:3) | BI01010001010000000000000515BI0100001318 | 5.28 | Cum |
| 208 | 11.05 | M.S. work in R.C.C | BI01010001010000000000000515BI0100001319 | 10.23 | Qtl |
| 209 | 11.06 | 20 mm thick neat cement plaster | BI01010001010000000000000515BI0100001320 | 51.12 | sqm |
| 210 | 11.07 | C.C. flooring 25 mm thick | BI01010001010000000000000515BI0100001321 | 51.18 | sqm |
| 211 | 11.08 | BRICK SOLING ON EDGE | BI01010001010000000000000515BI0100001322 | 314 | sqm |
| 212 | 12 | CONSTRUSTION OF OPEN SURFACE DRAIN | BI01010001010000000000000515BI0100001323 | ||
| 213 | 12.01 | Earth work in excavation | BI01010001010000000000000515BI0100001324 | 53.87 | Cum |
| 214 | 12.02 | P.C.C. 1:4:8 | BI01010001010000000000000515BI0100001325 | 17.95 | Cum |
| 215 | 12.03 | Brick work in foundation (1:4) | BI01010001010000000000000515BI0100001326 | 21.74 | Cum |
| 216 | 12.04 | 15 mm thick plaster (1:4) | BI01010001010000000000000515BI0100001327 | 239.4 | sqm |
| 217 | 12.05 | 25 mm thick flooring (1:2:4) | BI01010001010000000000000515BI0100001328 | 47.25 | sqm |
| 218 | 13 | CATTLE CRUSH | BI01010001010000000000000515BI0100001329 | ||
| 219 | 13.01 | Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, gratings etc, (when not included in an over all rates) wrought to required from including supply of steel and its wastages include cost of bolts nuts if required for and welding grinding and makeing holes as required completion of work febrication of holes doors chaukhats nosing | BI01010001010000000000000515BI0100001330 | 96.8 | Kg |
| 220 | 14 | EXTERNAL WATER SUPPLY & SEWARGE WORKS\n\nProvide and fixing G.I.pipes complete with\nG.I. fittings Including tenching and refilling etc. (etternal work) | BI01010001010000000000000515BI0100001331 | ||
| 221 | 14.01 | 50mm nominal bore | BI01010001010000000000000515BI0100001332 | 80 | Rm |
| 222 | 14.02 | 32mm nominal bore | BI01010001010000000000000515BI0100001333 | 50 | Rm |
| 223 | 14.03 | 25mm nominal bore | BI01010001010000000000000515BI0100001334 | 25 | Rm |
| 224 | 14.04 | Providing & fixing sand of grading zone V\nor coaser grade alround the G.I. pipes in external work | BI01010001010000000000000515BI0100001335 | ||
| 225 | 14.05 | 50mm nominal bore | BI01010001010000000000000515BI0100001336 | 80 | Rm |
| 226 | 14.06 | 32mm nominal bore | BI01010001010000000000000515BI0100001337 | 50 | Rm |
| 227 | 14.07 | 25mm nominal bore | BI01010001010000000000000515BI0100001338 | 25 | Rm |
| 228 | 14.08 | Providing & fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc) | BI01010001010000000000000515BI0100001339 | ||
| 229 | 14.09 | 32mm nominal bore | BI01010001010000000000000515BI0100001340 | 2 | Nos |
| 230 | 14.1 | 25mm nominal bore | BI01010001010000000000000515BI0100001341 | 2 | Nos |
| 231 | 14.11 | Constructing masanory chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement:4 coarse sand) for stop cock with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2;4 necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggrete 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat neat cement complete as per standard design:\nwith F.P.S. brick | BI01010001010000000000000515BI0100001342 | 3 | Each |
| 232 | 15 | Making connection of G.I. distribution branch with G.I. main of following size by providinbg and fixing tee, including cutting and threading the pipe etc complete | BI01010001010000000000000515BI0100001343 | ||
| 233 | 15.01 | 25 to 40 mm nominal bore | BI01010001010000000000000515BI0100001344 | 4 | Each |
| 234 | 15.02 | 50 to 80 mm nominal bore | BI01010001010000000000000515BI0100001345 | 2 | Each |
| 235 | 16 | SEPTIK TANK & SOAK PIT\n2300X1100X1300 | BI01010001010000000000000515BI0100001346 | ||
| 236 | 16.01 | deph up to 1.5 mt\nearth work in excavation | BI01010001010000000000000515BI0100001347 | 9.15 | Cum |
| 237 | 16.02 | Depth above 1.5 mt.\nearth work in excavation | BI01010001010000000000000515BI0100001348 | 3.35 | Cum |
| 238 | 16.03 | P.C.C. IN FOUNDATION (1:4:8) | BI01010001010000000000000515BI0100001349 | 0.91 | Cum |
| 239 | 16.04 | 1ST CLASS B/W IN SEPTIC TANK\n1:4 (1 CEMENT : 4 COARSE SAND) | BI01010001010000000000000515BI0100001350 | 5.64 | Cum |
| 240 | 16.05 | RCC WORK IN SEPTIK TANK\nCOVER OF SEPTIK TANK | BI01010001010000000000000515BI0100001351 | 0.65 | Cum |
| 241 | 16.06 | MS WORK IN RCC QTY SAME AS\nITEM NO 4 | BI01010001010000000000000515BI0100001352 | 0.41 | Qtl |
| 242 | 16.07 | 20 mm thick plaster with neat cement\nfinish | BI01010001010000000000000515BI0100001353 | 14.9 | Sqm |
| 243 | 16.08 | 25 MM THICK FLOORING | BI01010001010000000000000515BI0100001354 | 2.53 | Sqm |
| 244 | 16.09 | providing MS foot rest including fixing with 20x20x10 cm cement concrete block 1:3:6 (1 cement, 3 coarse sand, 6 graded aggregate of nominal size 20mm) as per sandard with 20x20 mm sqm bar. | BI01010001010000000000000515BI0100001355 | 5 | Nos |
| 245 | 16.1 | providing and fixing soil waste and vent pipe 75 mm dia sand cost iron S&S pipe | BI01010001010000000000000515BI0100001356 | 2 | Nos |
| 246 | 16.11 | providing & fixing sand cast iron\nterminal guard 75 mm dia. | BI01010001010000000000000515BI0100001357 | 2 | Nos |
| 247 | 16.12 | providing & fixing CI tee at the inlet\n& outlet of septik tank | BI01010001010000000000000515BI0100001358 | 1 | Nos |
| 248 | 16.13 | providing and fixing of plane sand cast iron S&S bend of required degree of 75 mm | BI01010001010000000000000515BI0100001359 | 1 | Nos |
| 249 | 16.14 | provide lead caulked joints to sand cost iron/certifugally cast (squn) irons pipes & fitings of dia 75 mm | BI01010001010000000000000515BI0100001360 | 1 | Nos |
| 250 | 16.15 | supply and fixing of medium quality RCC manhole cover with frame complete HD-20 circular shape 560 int. dia | BI01010001010000000000000515BI0100001361 | 1 | Nos |
| 251 | 16.16 | M.D. 10 square shape 450 int. dia | BI01010001010000000000000515BI0100001362 | 1 | Nos |
| 252 | 16.17 | making soak pit 2.5 m dia, 3.0 mt deep with 45x45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation\n7.5 | BI01010001010000000000000515BI0100001363 | 1 | Nos |
| 253 | 17 | SOLAR POWER BACKUP SUBMERSIBLE PUMP | BI01010001010000000000000515BI0100001364 | ||
| 254 | 17.01 | Transportation of mini drilling Rig machine with camp equipage to site | BI01010001010000000000000515BI0100001365 | 1 | Job |
| 255 | 17.02 | Drilling of 350 mm dia bore hole with lowering of tubwell assembly | BI01010001010000000000000515BI0100001366 | 90 | m |
| 256 | 17.03 | supply and fixing of 200 mm dia plain rigid PVC casing pipe(10kg/sqcm press rating) and accessories. | BI01010001010000000000000515BI0100001367 | 30 | m |
| 257 | 17.04 | supply and fixing of 150 mm dia plain rigid PVC slotted pipe and accessories. | BI01010001010000000000000515BI0100001368 | 30 | m |
| 258 | 17.05 | Supply and fixing of 200 mm dia plain rigid PVC casing pipe(10kg/sqcm press rating) and accessories. | BI01010001010000000000000515BI0100001369 | 30 | m |
| 259 | 17.06 | supply and fixing of nylon jali around the slotted pipes complete as required | BI01010001010000000000000515BI0100001370 | 1 | Job |
| 260 | 17.07 | Providing and packing of coarcse sand/pea gravel around the pipe | BI01010001010000000000000515BI0100001371 | 1.5 | Cum |
| 261 | 17.08 | Supply of 100 mm dia johnson screen | BI01010001010000000000000515BI0100001372 | 1.5 | m |
| 262 | 17.09 | Supply and installation of 3 H.P.Ac solar submersible pump with control panel,support wire etc complete (with solar panel & solar power back up system) | BI01010001010000000000000515BI0100001373 | 1 | Set |
| 263 | 17.1 | Providing 3 core 2.5 sqmm PVC insulated copper conductor submersible cable (from pump panel to submersible pump) | BI01010001010000000000000515BI0100001374 | 90 | m |
| 264 | 17.11 | Providing and fixing 100 mm G.I. pipe complete with fitting and clamps including cutting and making good the well etc. (from submersible pump to ground level) | BI01010001010000000000000515BI0100001375 | 20 | m |
| 265 | 17.12 | Providing and fixing 100 mm dia brass gate valve with CI wheel of approved quality. | BI01010001010000000000000515BI0100001376 | 1 | Nos |
| 266 | 17.13 | Supply and fixing of tubwell accessories i.e well cap,clips,clamp,etc to complete the job in all respect. | BI01010001010000000000000515BI0100001377 | 1 | Job |
| 267 | 17.14 | Fixing testing and commissionong for erection and lowering of submersible pump,100 mm dia GI column pipe 3 core 2.5 sqmm submersible copper cable upto the control panel,supporting clamps,cable, clips,pressure, gauge,connection line and all other accessories required for the proper completion of work. | BI01010001010000000000000515BI0100001378 | 1 | Job |
| 268 | 17.15 | Testing and development of tub well | BI01010001010000000000000515BI0100001379 | 1 | Job |
| 269 | 17.16 | Cost of 1 ok L tank on terrace. | BI01010001010000000000000515BI0100001380 | 10000 | Ltr |
AI Tender Summary
Tender Timeline
Mar 13, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 19, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 20, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender