Construction Work Of Road From Harijan Hostel To Swala Joharatak Hotmix.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Mar 2021
0 days left
EMD
3.57 Lakhs
Bank guarantee accepted
Document Fee
4219
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mawana → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Work Of Road From Harijan Hostel To Swala Joharatak Hotmix.
BOQ
| Name of Work: Ward 25 Mohalla Tihai me Harijan Chatrawas se Swala Johartak Hotmix dwara road ka nirman work.work. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation on ordinary soil (Loam ,clay or sand) including lift upto 1.5 m .and lead upto 30.m and including filling watering and ramming of excavated earth into the eanches or into the space between the builing and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge upto a distance of 30 m . from the foundation trenches. S.I. NO.251 | item1 | 265.65 | M3 |
| 2 | 2 | bricklining along the both side the road complete item | item2 | 0.33 | km |
| 3 | 3 | Construction of granular sub base by providing well graded material , spreading in uniform layers with motor graded on prepared surface ,mixing by mix in place method with rotavator at OMC , Compacting with smooth wheel roller to achieve the desired density as per MORD specifacation. | item3 | 173.25 | M3 |
| 4 | 4 | Providing , laying spreading and compacting stone aggregate of 22.4-53 mm size to specification i/c uniform layer and compacting with road roller i/c all complete item | item4 | 175.25 | M3 |
| 5 | 5 | Providing and applying primer coat over prepared surface granular base with medium setting bitumen emulsion with spray set including cleaning of W.B.M Surface spreaying primer @0.75 kg/sqm complete item | item5 | 2310 | M2 |
| 6 | 6 | providing and applying tack coat overB.M AND S.D.B.C Surface COMPLETE ITEM | item6 | 4620 | M2 |
| 7 | 7 | providing and lying of bituminous macadam with hot mix plant producing an average output 100 tones per hr using crushed aggregate of specified grading premixed with bituminous binder transported to site complete item | item7 | 115.5 | M3 |
| 8 | 8 | providing and lying of semi dence bituminous macadam with hot mix plant producing an average output 100 tones per hr using crushed aggregate of specified grading premixed with bituminous binder@5 percent mix of filler transported to the hot mix to site complete item | item8 | 92.4 | M3 |
| 9 | 9 | s/fixing of sign board complete item | item9 | 1 | job |
| 10 | 10 | Providing and laying hot applied thermoplastic comound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area , thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 . The finished surface to be level , uniform and free from streaks and holes .Rates are inclusive of all taxes, royalty , VAT etc. all T&P /machine material and labour required for proper completion of work | item10 | 157.5 | sqm |
| 11 | 11 | Reflective Raised Pavement Marker with shanks providing and fixing of raised pavement markers with twin shanks of adequate lenght anchored with epoxy/ bitumen adhesive of appored make (Cat Eye) type x-ASTMD4956-04 avery dennision /3m (USA Make) having moulded body of ploycarbonate ,ASA, Hips or ABS able to support a load of 13.635 M.T. tested in accordance with ASTMD 4280 Type H and other requirement mentioned in MoRTH Circular, its reflective lens made of micro primatic welded to the body. the lenght , height and width of the body shall not exceed 130mm , 20mm and 105 mm respectively, the area of each refletive surface shall not be less than 13 sqm .cm. on each side sloping at the angle of 35+5 degree to the base ensure maximum reflectively. it shall comply to specification of Category Aof MORT&H circular no. RW/NH 33023/10/97-DO-III dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to ASTMD 788 or equivalent .With 7 years warrenty. rate shall be inclusive of all taxes , royalty , etc .All T&P / machine material and labour required for proper completion of work. | item11 | 600 | nos |
| 12 | 12 | 12% GST | item12 | 1 | job |
AI Tender Summary
Tender Timeline
Jan 01, 1900
11:30 IST
Tender Published
Tender notice published.
CompletedMar 19, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 19, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender