Fabrication , Supply And Erection Of Gate And Hoist Of Dengaguda Nallah-Iii Check Dam Of Jharigaon Block Under Minor Irrigation Sub-Division , Chandahandi Mechanical Works
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Mar 2021
0 days left
EMD
7600
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
AMBAGUDA → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Fabrication , Supply And Erection Of Gate And Hoist Of Dengaguda Nallah-Iii Check Dam Of Jharigaon Block Under Minor Irrigation Sub-Division , Chandahandi Mechanical Works
BOQ
| Name of Work: Fabrication, Supply & Erection of Gate & Hoist of Dengaguda Nallah-III Check Dam of Jharigaon Block Under Minor Irrigation Sub-Division, Chandahandi | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply of structural steel materials of different section and sizes (IS:2062), stainless steel flats of different section and sizes (04 Cr 19 Ni of IS :1570 (Part-5), fabrication including machining and assembly of second stage embedded parts consisting of sill beam, side seal, track , guide etc. , vertical gate consisting of skin plate , horizontal girder, end vertical girder , lifting bracket, seal flats etc., screw hoisting arrangements consisting, cross beam, base plate etc. of total weight around 3.281MT for 6 Nos. of gates as per specification and approved drawings with all accessories including machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts all complete as per instruction of Engineer-in-charge | BI01010001010000000000000515BI0100001112 | 1 | Set |
| 2 | 2 | Supply of following bought out materials for 6 nos. of gates- M.S studs Ø 16 mm x 150mm long with Double Nut & Washer.- 60 Nos. M.S studs Ø 16 mm x 200mm long with Double Nut & Washer.- 60 Nos, Gate pin Ø30mmx140Lx10mm th., collar Ø80mm material 45C-8 of IS 1570 Part-II with split pin IS –IS:549 Ø8mmx80L-6 nos, Bronze pad LTB-1 100mmx40mmx10mm with counter sunk hole fitted with MS plate 100mmx40mmx12mm & CSK screw M10x25Nx4nos - 24No, , Bottom rubber seal(IS:11855) 1.10 Mtr. Each (As per drawing) - 6nos, Side rubber seal(IS:11855) 3.00 Mtr. Each ( As per drawing)- 6nos, Countersunk screw M12 x 70 of IS:1365- 180Nos, Hexagon head bolt-IS:1363 (Part-1)/ISO 4016 M12 x70 N with punched washer A-13 IS: 2016- 72nos, Anchor bolt M16x200mm long- 96nos 65Kg CI gear box with 6no hexagonal nut- GR FG260 of IS:210, Single thrust ball bearing SKF 51220- 6no, Cover plate bolts and nuts M16x160N with washer GKW 8.8GR- 24nos, Foundation bolts and nuts M25x200N with washer GKW 8.8GR- 24nos,Operating handle suitable to MS nut- 6no, 63 mm dia screw stem-2800 mm long(To be square threaded M62X9 of IS-4694))- 06Nos, Grease mp3- 30Kg | BI01010001010000000000000515BI0100001113 | 1 | Set |
| 3 | 3 | Erection, positioning, aligning, fixing, trial, commissioning, testing etc. of second stage embedded parts consisting of sill beam, side seal, track , guide etc. , vertical lift gate consisting of skin plate , horizontal girder, end vertical girder , lifting bracket, seal flats etc., screw hoisting arrangements consisting of hoist bridge, gear box, supporting beams, cross beam, base plate, fixing of anchor bolts, etc. of total weight around 3.727MT for 6 Nos. of gates as per specification and approved drawings with all accessories including machinery, fixtures, labour, watch & ward, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts ,transportation charges with labour charges for loading and unloading all complete as per instruction of Engineer-in-charge | BI01010001010000000000000515BI0100001114 | 1 | Set |
| 4 | 4 | Painting of 2nd stage embedded parts, vertical lift gate and its components in both upstream side and downstream side including cleaning, degreasing, handling, cost of paint, applying of one coat Zinc primer of 40micron thick and three coats of coal tar epoxy paint of 100 micron each, of approximately 39.42 sqm for 6 Nos. of gates, Painting of Hoist bridge, gear box, cross beam etc. including cleaning, degreasing, handling, cost of paint, applying of one coat Zinc primer of 40micron thick and three coats of Aluminium paint of 100 micron each, of approximately 14.04 sqm for 6 Nos. of gates all inclusive of labour, materials and consumables as per relevant IS Code specifications and approved drawing with all lead & lifts as per instruction of Engineer-in-charge | BI01010001010000000000000515BI0100001115 | 1 | Set |
| 5 | 5 | Providing reinforced cement concrete grade M-20 of approximately 2.466 cum for 2nd stage concreting using 20 mm and downgraded crusher broken hard granite aggregates of approved grade and quality from approved quarry free from weathered skin surface, dust and any other deleterious materials as per approved design, drawings and specification with all leads, lifts, de-lifts including cost, carriage, royalty and taxes of all materials, mixing and vibrating concrete by mechanical means including providing rigid & smooth steel form works for 2nd stage concrete works and dismantling the same after required days, curing, supply of all tools & plants, machinery, labour charges, cost & carriage of water for mixing and curing concrete including hire and running charges of all machinery / equipments, construction/ erection and removal of gangways, stagings, scaffoldings & incidental charges complete for 6 Nos. of gates as per the direction of the Engineer in-Charge | BI01010001010000000000000515BI0100001129 | 2.466 | Cum |
AI Tender Summary
Tender Timeline
Mar 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 24, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 25, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender