Construction Of Veterinary Dispensary At Marhoon District Kangra ( Hp ) Construction Of Building Portion Including Water Supply And Sanitary Installation , Construction Of Septic Tank And Providing Rain Water Harvesting System
Tender Value
12.35 Lakhs
Estimated cost
Bid Submission
30 Mar 2021
0 days left
EMD
24800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhawarna → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Veterinary Dispensary At Marhoon District Kangra ( Hp ) Construction Of Building Portion Including Water Supply And Sanitary Installation , Construction Of Septic Tank And Providing Rain Water Harvesting System
BOQ
| Name of work: -Contruction of Veterinary Dispensary at Marhoon District Kangra (HP) (SH:- Construction of building portion including water supply and sanitary installation, construction of septic tank & providing rain water harvesting sysetem). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation, trenches, etcetera in earth work in all kinds of classification, of soils such as pick work, jumper work, blasting work saturated soils including chiseling or any other mixed variety of soils, dewatering and / or removal of slush and other incidentals, lift up to any height stacking excavated soil up to all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) thick layer when required into plinths, sides of foundation etcetera consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth to the disposal point within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 142.5 | Per cubic metre | |
| 2 | 2 | Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, saturated soil including chiselling or any other mixed variety of soil dewatering and / or removal of slush and other incidentals, lifts upto any height, stacking the excavated soil upto all leads and lifts clear from the edge of excavation and then returning the stacked soil in fifteen centimeter thick layers when required into plinth sides of foundation etcetera consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth to the disposal point within all leads, lifts and carriage of material complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 4.5 | Per cubic metre | |
| 3 | 3 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including with in all leads, lifts, carriage of material and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 5.13 | Per cubic metre | |
| 4 | 4 | Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling upto all height and removal of the same for in-situ reinforced concrete and plain concrete work in : | |||
| 5 | 4.1 | Flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 21.94 | Per square metre | |
| 6 | 4.2 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 43.98 | Per square metre | |
| 7 | 4.3 | Beam, cantilever, girders and lintels, sides and soffits of beam beams haunching cantilevers girders bressumers and lintels of any depth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 6.81 | Per square metre | |
| 8 | 4.4 | Edges of slabs and breaks in floors and walls of any width including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 28.66 | Per running metre | |
| 9 | 5 | Providing and laying cement concrete 1:6:12 ( one cement : six sand : twelve graded, crushed stone aggregate 40mm (forty millimetre) nominal size) curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 6.11 | Per cubic metre | |
| 10 | 6 | Providing and laying cement concrete 1:4:8 ( one cement : four sand : eight graded, crushed stone aggregate 40mm (forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 6.38 | Per cubic metre | |
| 11 | 7 | Providing and laying cement concrete 1:3:6 ( one cement : three sand : six graded, crushed stone aggregate 40mm (forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 2.04 | Per cubic metre | |
| 12 | 8 | Providing and laying damp proof course 38mm (thirty eight millimetre) thick cement concrete 1:2:4 (one cement : two sand : four graded/crushed crushed stone aggregate 20mm (twenty millimetre) nominal size) and curing complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 12.83 | Per square metre | |
| 13 | 9 | Applying a coat of hot bitumen (maxphalt 80/100 (eighty upon one hundred) equivalent) using 1.70 kg (one point seven zero kilogram) per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosine oil including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 12.83 | Per cubic metre | |
| 14 | 10 | Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 ( one cement : two sand : four graded, crushed stone aggregate 20mm (twenty millimetre) nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 0.21 | Per cubic metre | |
| 15 | 11 | Providing and laying M-20 grade of cement concrete mechanically mixed and vibrated with minimum cement contents of 320 Kg/cum (three hundred twenty kilogram per cubic metre) with graded, crushed stone aggregate 20mm (twenty millimetre) nominal size and including curing complete excluding cost of form work and reinforcement for reinforced concrete work in: | |||
| 16 | 11.1 | Foundation footing, bases of columns and the like mass concrete upto floor all level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1.6 | Per cubic metre | |
| 17 | 11.2 | Walls any thickness but not less than 0.10mtrs. (zero point one zero metre) thickness including attached pilasters, buttresses plinth and string courses upto any depth /any height including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 3.3 | Per cubic metre | |
| 18 | 11.3 | Suspended floor, roofs, landing and shelves and their support balconies beams girders, bressumers and cantilevers upto all floor level including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 2.88 | Per cubic metre | |
| 19 | 12 | Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in all floors including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 583.4 | Per Kilogram | |
| 20 | 13 | Second class brick work using common burnt clay building bricks of approved kiln in super structure upto all height and depth in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 21.85 | Per cubic metre | |
| 21 | 14 | Second class brick work using common burnt clay building bricks of approved kiln in foundation and plinth in mud mortar including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 0.2 | Per cubic metre | |
| 22 | 15 | Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:5 (one cement : five sand) and curing complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 18.59 | Per cubic metre | |
| 23 | 16 | Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 28.11 | Per cubic metre | |
| 24 | 17 | Boulder filling of selected hard dry stone hand packed tightly under floor including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 5.13 | Per cubic metre | |
| 25 | 18 | Providing second class deodar wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 0.48 | Per cubic metre | |
| 26 | 19 | Providing and fixing 40mm (forty millimeter) thick second class deodar wood panelled, glazed or panelled and glazed shutter including fixing of double glass with rubber gasket for doors, windows and clere story windows including black enamelled iron butt hinges with necessary screws including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 12.15 | Per square metre | |
| 27 | 20 | Providing and fixing 40mm (forty millimeter) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85g (eighty five) gauge with wire of diameter 0.56mm (zero point five six millimeter) for doors, windows and clerestore windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 10.61 | Per square metre | |
| 28 | 21 | Providing and fixing 19mm (nineteen millimetre) thick water proof termite resistant commercial board box and its shelves including 19 mm (nineteen millimetre) thick commercial board shutter with back side of the cabinet of 8 mm (eight millimetre) thick ply and cut portion of the shelves shall be finished with 6mm (six millimetre) hard wood edging including piano hinges, other accessories complete in all respect with in all leads, lifts, carriage of material, other incidental charges complete as per architectural drawings, direction and satisfaction of Engineer-in-Charge. | 38.39 | Per square metre | |
| 29 | 22 | Providing and fixing 6mm (six millimetre) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and fillets to be measured and paid for separately) including carriage of material within all leads lifts and other incidental charges complete in all respect. | 38.39 | Per square metre | |
| 30 | 23 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 31 | 23.1 | 300x16mm (Three hundred into sixteen millimeter) | 2 | Each | |
| 32 | 23.2 | 250x16mm (Two hundred fifty into sixteen millimeter) | 1 | Each | |
| 33 | 24 | Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 34 | 24.1 | 200x10mm (Two hundred into ten millimeter) | 12 | Each | |
| 35 | 24.2 | 150x10mm (One hundred fifty into ten millimeter) | 28 | Each | |
| 36 | 25 | Providing and fixing mat finish aluminium handles anodized transparent or dyed to required shade and colour with necessary screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 37 | 25.1 | 125mm (One hundred twenty five millimetre) | 12 | Each | |
| 38 | 25.2 | 100mm (One hundred millimetre) | 28 | Each | |
| 39 | 26 | Providing and fixing bright finished or/and black enamelled iron helical door spring 150mm (one hundred fifty millimetre) with screws etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 2 | Each | |
| 40 | 27 | Providing and fixing 100mm (one hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etcetera to suit shutter thickness including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 2 | Each | |
| 41 | 28 | Providing and fixing 100mm (one hundred millimetre) bright finished brass hard drawn hooks and eyes including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 14 | Each | |
| 42 | 29 | Providing 40x3mm (forty into three millimetre) flat iron hold fast 40cm (forty centimetre) long including fixing to frame with 10mm (ten millimetre) diametre bolts, nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre) 1:3:6 (one cement : three sand : six graded/crushed crushed stone aggregate 20mm (twenty millimetre) nominal size) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 38 | Each | |
| 43 | 30 | Providing and fixing M.S. plain grills of required pattern and design in iron frames of windows etcetra with flats square or round bars with round headed bolts and nuts or by screws complete in all respect including carriage of materials within all leads and lifts complete in all respect. | 94.5 | Per kilogram | |
| 44 | 31 | Providing and fixing 10mm (ten millimetre) thick antiskid water proof stain and impact resistent heavy duty viterified tiles Kajaria/Nitco/AGL or equivalent 600x600x10mm (six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specification in all floors including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 34.74 | Per square metre | |
| 45 | 32 | Providing and fixing 10mm (ten millimetre) thick antiskid water proof stain and impact resistent heavy duty viterified tiles Kajaria/Nitco/AGL or equivalent 300x600x10mm (three hundred into six hundred into ten millimetre) manufactured of approved shade and colour in skirting and dado laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specification in all floors including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 3.89 | Per square metre | |
| 46 | 33 | Providing and laying granite stone in flooring 20mm (twenty millimetre) (average) thicknees base of cement mortar 1:3 (one cement : three sand) laid over and jointed with grey cement slury mixed with pigment to match the shade of granite stone including rubbing and polishing complete 20mm (twenty millimetre) thick in all floors including curing and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 6.14 | Per square metre | |
| 47 | 34 | White glazed tiles 6mm (six millimetre) thick in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry complete upto all floor level in all respect including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 3.65 | Per square metre | |
| 48 | 35 | White glazed tiles 6mm (six millimetre) thick in skirting riser of steps and dado 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry complete upto all floor level in all respect including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 12.44 | Per square metre | |
| 49 | 36 | Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-Charge complete as per specification including carriage of material within all leads, lifts and other incidental charges. | 70.96 | Per square metre | |
| 50 | 37 | Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental charges. | 20.8 | Per running metre | |
| 51 | 38 | Providing and fixing MS BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid seprately) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 24.35 | Per square metre | |
| 52 | 39 | Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings complete as per design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 17.74 | Per quintal | |
| 53 | 40 | Steel work welded in built up sections, trusses and framed work including cutting hoisting and fixing in position and applying a priming coat of red lead paint in beams, joists, channels, angles, tees flats with connecting plates or angle cleats in main and cross beams, hip and jack rafters purlins connected to common rafters and the like complete as per design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 7.68 | Per quintal | |
| 54 | 41 | Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing and launching in position and applying a priming coat of red lead paint in gratings framed guard bars ladders, railings, brackets and similar works including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1.22 | Per quintal | |
| 55 | 42 | Providing and fixing MS round holding down or anchor bolts with nuts and washer plates complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1 | Per quintal | |
| 56 | 43 | Applying Birla White wall care putty over plaster surface after thoroughly brushing the suface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the suface complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 114.05 | Per square metre | |
| 57 | 44 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 72.75 | Per square metre | |
| 58 | 45 | Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing with white lead for priming complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 80.98 | Per square metre | |
| 59 | 46 | Painting two coats (excluding priming coat) on new wood and wood based surfaces, with white enamel paint other than white to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 80.98 | Per square metre | |
| 60 | 47 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter enamel white paint including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 24.35 | Per square metre | |
| 61 | 48 | 6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement : three sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 8.71 | Per square metre | |
| 62 | 49 | 10mm (ten millimetre) thick cement plaster in single coat on fair side of brick/concrete walls for internal plastering upot all floor level including arrises, internal rounded angles chamfers and/or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cment mortar 1:3 (one cement : three sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 25.29 | Per square metre | |
| 63 | 50 | 15mm (fifteen millimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 114.05 | Per square metre | |
| 64 | 51 | 15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior/exterior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 72.75 | Per square metre | |
| 65 | 52 | 15mm (Fifteen millimeter) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth in cement mortar 1:3 (one cement : three sand) complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 16.81 | Per square metre | |
| 66 | 53 | Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 114.05 | Per square metre | |
| 67 | 54 | Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded/crushed crushed stone aggregate 20mm (twenty millimeter) nominal size including finishing the top surface of concrete smooth including curing complete and carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 17.9 | Per square metre | |
| 68 | 55 | Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts complete in all respect. | 17.9 | Per square metre | |
| 69 | 56 | Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) cement concrete in 1:5:10 (one cement : five sand : ten graded/crushed stone aggregate of 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded/crushed stone aggregate of 20mm (twenty millimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including curing and carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 32.24 | Per running metre | |
| 70 | 57 | Providing precast reinforced cement concrete slab upto any thickness and width in 1:2:4 (one cement : two sand : four graded,crushed stone aggregate 10mm (ten millimetre) nominal size) upto all floor level including centring and form work and curing complete, but excluding cost of reinforcement and including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 0.11 | Per cubic metre | |
| 71 | 58 | Providing precast reinforced cement concrete eaves board/slab average thickness 25mm (twenty five millimetre) and 15cm to 30cm (fifteen centimetre to thirty centimetre) wide in 1:2:4 (one cement : two sand : four graded, crushed stone aggregate 10mm (ten millimetre) nominal size) upto floor all level including centring and form work and curing complete but excluding cost of reinforcement and including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 73 | Per running metre | |
| 72 | 59 | Supplying and laying of brick aggregate 50mm (fifty millimetre) nominal size including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 7.79 | Per cubic metre | |
| 73 | 60 | Providing and laying 20mm (twenty millimetre) nominal bore in trenches ISI marked galvanized mild steel tubes (medium grade) tube fitting of approved brand and manufacture (earth work in trenches to be measured and paid for separately) complete in all respect as per H.P.P.W.D. specifications including carriage of material with in all leads, lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 25 | Per running metre | |
| 74 | 61 | Providing and fixing polythelene aluminium polythine (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black conforming to IS: 15450-2004 for water supply including clamps at one metre spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 75 | 61.1 | 1216 (one thousand two hundred sixteen) (16 mm (sixteen millimetre) OD) pipe | 20 | Per running metre | |
| 76 | 62 | Providing and fixing composite and seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fittings complete including cutting and making good the wall etcetera including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 77 | 62.1 | Equal Tee 1216 (one thousand two hundred sixteen) | 10 | Each | |
| 78 | 62.2 | Female branch Tee 1216 x1216x15mm (one thousand two hundred sixteen into one thousand two hundred sixteen into fifteen millimetre) thread. | 10 | Each | |
| 79 | 63 | Providing and fixing composite and seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fittings complete including cutting and making good the wall etcetera including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 80 | 63.1 | Female Elbow 1216 x15mm (one thousand two hundred sixteen into fifteen millimetre) thread | 12 | Each | |
| 81 | 64 | Providing and fixing composite and seal compression fittings as per IS 15450-2004 for cold water supply for example tees, elbows, reducers, connectors, couplers and clamps with jointing, testing and fittings complete including cutting and making good the wall etcetera including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 82 | 64.1 | Couplers 1216 (one thousand two hundred sixteen) | 12 | Each | |
| 83 | 65 | Providing and fixing PVC 1000 (one thousand) litres net capacity water storage tank of ISI: 12701 marked, G.I. inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level and including carriage of material with in all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 84 | 66 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipe ISI marked including jointing with approved adhesive etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 85 | 66.1 | 110mm (one hundred ten millimetre) diametre. | 10 | Per running metre | |
| 86 | 66.2 | 75mm (seventy five millimetre) diametre. | 48.5 | Per running metre | |
| 87 | 67 | Providing and fixing PVC double equal branch with ovel access door, ISI marked insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | |||
| 88 | 67.1 | 110mm (one hundred ten millimetre) diametre. | 2 | Each | |
| 89 | 67.2 | 75mm (seventy five millimetre) diametre. | 4 | Each | |
| 90 | 68 | Providing and fixing PVC door bend with ovel access door, insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 91 | 68.1 | 110mm (one hundred ten millimetre) diametre. | 1 | Each | |
| 92 | 68.2 | 75mm (seventy five millimetre) diametre. | 2 | Each | |
| 93 | 69 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 94 | 69.1 | 110mm (one hundred ten millimetre) diametre. | 2 | Each | |
| 95 | 69.2 | 75mm (seventy five millimetre) diametre. | 4 | Each | |
| 96 | 70 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 97 | 70.1 | 110mm (one hundred ten millimetre) diametre. | 2 | Each | |
| 98 | 70.2 | 75mm (seventy five millimetre) diametre. | 3 | Each | |
| 99 | 71 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etcetera complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 100 | 71.1 | 110mm (one hundred ten millimetre) diametre. | 12 | Each | |
| 101 | 71.2 | 75mm (seventy five millimetre) diametre. | 12 | Each | |
| 102 | 72 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 103 | 72.1 | 110mm x 90mm (one hundred ten into ninety) millimetre | 3 | Each | |
| 104 | 73 | Providing and fixing PVC connection pipe with brass unions 300/450mm ( three hundred/ four hundred fifty millimetre) length 15mm (fifteen millimeter) nominal bore complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 105 | 74 | Providing and fixing PVC cowl ISI marked including fixing with approved adhesive etcetera including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | |||
| 106 | 74.1 | 110mm (one hundred ten millimetre) diametre. | 2 | Each | |
| 107 | 75 | Providing and fixing Orrisa pattern of approved shade Vitreous China wash down water closet squatting pan (Indian type W.C.pan) size 580mm (five hundred eighty millimetre) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 108 | 76 | Providing and fixing Vitreous China 100mm (One hundred millimetre) size “P” or “S” trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (One cement : One sand) complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 109 | 77 | Providing and fixing PTMT Coloured/ white high density polyethylene / poly propylene 10 (ten) litres capacity (full flush) European standard control low level flushing cistern with fitting with a pair of brackets with fittings such as lead valve syphon, 15mm (fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (forty millimetre) diametre C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 110 | 78 | Providing and fixing G.I. inlet connection for flush pipe of approved specification/make with W.C. pan complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 111 | 79 | Constructing brick masonry chamber for under ground C.I. inspection chamber and bends with common burnt clay bricks in cement mortar 1:5 (one cement :five sand) C.I cover with frame (light duty) 355x610mm (three hundred fifty five into six hundred ten millimetre) internal dimensions total weight of cover with frame to be not less than 38 Kg. (thirty eight kilogramme) (weight of cover 23 Kg. (twenty three kilogramme) and weight of frame 15 Kg.(fifteen kilogramme)) RCC top slab with 1:2:4mix in (one cement : two sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) foundation concrete 1:5:10 (one cement :five sand : ten graded, crushed stone aggregate 40 mm (forty millimetre) nominal size) inside plaster 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement : three sand ) finished smooth with a floating coat of neet cement on walls and bed concrete etcetra complete inside dimensions 455x610x450mm (four hundred fifty five into six hundred ten into four hundred fifty millimetre) deep single pipe line complete in all respect including carriage of materials within all leads and lifts. | 8 | Each | |
| 112 | 80 | Providing and fixing Vitreous China 600 x 450 x 250 mm ( six hundred into four hundred fifty into two hundred fifty millimetre) kitchen sink with C.I. or M.S. brackets, painted white including cutting hole in walls and making good the same but excluding fitting including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 113 | 81 | Providing and fixing flat back 550x400mm (five hundred fifty into four hundred millimeter) vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 114 | 82 | Providing and fixing 32mm (thirty two millimetre) diametre C.P.brass waste of approved specification/make for wash basin or sink complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 2 | Each | |
| 115 | 83 | Providing and fixing 100mm (one hundred millimetre) sand cast iron grating of approved specification/make for gully, floor or nahni trap complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 3 | Each | |
| 116 | 84 | Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) bavelled edge mirror of superior glass mounted on 6mm (six millimetre) thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws and washers complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 117 | 85 | Providing and fixing 600 x 20mm (six hundred into twenty millimetre) CP brass towel rail complete with CP Brass brackets fixed to wooden plugs with CP brass screws complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 118 | 86 | Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass self with CP brass brackets and guard rail complete fixed to wooden plugs with CP brass screws complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 119 | 87 | Providing and fixing 150mm x 150mm (one hundred fifty millimetre into one hundred fifty millimetre) size soap trays (Vitreous China) recessed soap tray including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 2 | Each | |
| 120 | 88 | Providing and fixing 15mm (fifteen millimetre) diametre C.P.brass bib tap heavy duty with capstan head including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 2 | Each | |
| 121 | 89 | Providing and fixing 15mm (fifteen millimetre) diametre C.P. brass pillars tap heavy duty capstan head including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 1 | Each | |
| 122 | 90 | Providing and fixing 15mm (fifteen millimetre) diametre brass stop cocks heavy duty including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. | 2 | Each | |
| 123 | 91 | Providing and fixing brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | |||
| 124 | 91.1 | 15mm (fifteen millimeter) nominal bore | 2 | Each | |
| 125 | 92 | Constructing man hole with RCC top slab in 1:2:4 mix (one cement : two sand : four graded, crushed stone aggregate 20mm (twenty millimetre) nominal size) foundation concrete 1:4:8 (one cement : four sand : eight graded, crushed stone aggregate 40mm (forty millimetre) nominal size) in side plastering 15mm (fifteen millimetre ) thick with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two sand : four graded, crushed stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curing and testing inside size 800x800mm (eight hundred into eight hundred millimetre) and 1000mm (one thousand millimetre) deep including CI cover with frame (light duty single seal pattern-I) 455x610mm (four hundred fifty five into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38Kg. (Thirty eight kilograme) (weight of cover 23Kg. (twenty three kilograme) and weight of frame 15Kg. (fifteen Kilogramme) with 200mm (two hundred millimetre) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) as per HP.PWD. specification and complete in all respect including carriage of materials within all leads and lifts and other incidentals as per direction and satisfaction of Engineer-in-Charge. | 5 | Each | |
| 126 | 93 | Constructing water collection chamber 300x300x500mm (three hundred into three hundred into five hundred millimetre) in side size for collection of water with cement concrete slab 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty millimeetre) nominal size) 75mm (seventy five millimetre) thick foundation concrete 1:5:10 (one cement : five sand : ten graded, crushed stone aggregate 40mm (forty millimetre) nominal size) finished with floating coat of neat cement and 100mm (one hundred millimetre) cast insitu plain concrete wall in 1:2:4 (one cement : two sand : four graded,crushed stone aggregate 20mm (twenty millimetre nominal size) including form work complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. | 16 | Each |
AI Tender Summary
Tender Timeline
Mar 15, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedMar 30, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 30, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender